Device impossible a intégrer alors que détecté dans les logs

Plugins Protocole domotique
1

Bonjour !

Je suis sur jeedom delta (sur VM Freebox donc), version stable 4.3.17

J’ai un problème avec le plugin BLEA. L’objectif est d’utiliser un nut find 3 pour faire de la détection de présence.

Niveau configuration des nut j’ai suivi les conseils trouvable sur le forum, donc je pense que c’est bon.

Niveau plugin, dépendance ok, démon ok, clef bluetooth reconnu. Après mes essais infructueux, j’ai relancé l’installation des dépendances (comme indiqué dans la Doc), et même réinstaller le plus en entier.

Quand je lance un scan, aucun devices n’est détecté.
Pourtant, en forçant les log en débug, je vois que plusieurs Device (dont le nut) sont détectés.
Mais dès que je le lance le scan, je vois dans les log que le plugin passe en mode « learning » et tous les scan suivant sont « clearing Seen ».

Bref je ne sais plus quoi faire :thinking:

J’ai testé de désactiver certaine autre plugin comme dans ce poste BLEA - Problème de scan
Mais ce fut un échec :sweat_smile:

2023-09-04 (1)
2023-09-04 (1)1920×1080 307 KB

2023-09-04
2023-09-041920×1080 120 KB

2

Bonjour,

Merci de poster les logs en format texte. C’est mieux pour mes yeux.

Il faut lancer un scan pour des produits inconnu étant donné que tu n’as pas un Nut 3 mais un Nutale.

Et attendre plus longtemps pendant le scan.

3

Bonjour,

Désolé mais je suis un débutant sur jeedom, au boulot sur mon portable, j’ai pas su comment faire (pour les log)

J’ai mis ces log pour montre que l’antenne détecte bien des objets quand elle n’est pas en mode apprentissage. Et J’ai bien tester en cochant la détection de périphérique inconnu et en sélectionnant « tous » quand je lance le scan, attendu 1min (le scan complet quoi), mais rien n’y fait, aucun périphérique ne s’affiche.

4

Pour le log tu fais une sélection avec ta souris (après avoir cliqué sur le bouton pause en haut à droite) puis clic droit->copier ou ctrl+C. Comme du texte quoi.

Le scan est plus long que 1 minute de mémoire.

Essaye de réveiller le module pendant le scan en cliquant 5 fois dessus.

5

Capture d’écran du 2023-09-05 17-41-41

Je vois que tu utilises des Shelly, si ce sont des Gen2, tu peux essayer de faire de la détection de Nut avec un script.

Tu devrais retirer ton numéro de téléphone portable dans ton profil.

6

Au bout d’un minute je vois dans les log que le mode apprentissage s’arrête. Et par la suite de nouveau tous les périphériques bluetooth sont détectés…

J’ai essayé en cliquant 3 fois, j’essaierai 5 ce soir ou demain. Mais étant donné qu’aucun périphérique n’est détecté une fois l’apprentissage lancé, je me disais que le problème devais venir d’ailleurs que du nutale…

Au début je pensais que la clef bluetooth que j’ai mis sur la Freebox ne devait pas être compatible, mais vu que des périphériques sont bien vu en dehors du mode apprentissage…

7

Oula :sweat_smile: ça comment a causer chinois pour moi, mais j’essaierai de me pencher dessus au calme demain, après avoir essayé l’autre astuce que l’ont m’a proposé :sweat_smile::sweat_smile:

Merci beaucoup pour l’info !! J’imagine qu’il a du se mettre automatiquement quand je me suis inscrit…

8

Le Nutale vu hors scan n’est pas le tien ?

9

Si si, c’est la bonne adresse MAC

10

5 appuis sur le nut n’a rien changé. Enfin si, apriori il s’est éteint puisque que je ne le voyais plus dans les logs, et un appuie long de 5sec l’a réveiller, il apparaissait de nouveau.
Mais toujours rien en mode apprentissage.

J’ai exporter un log « propre », pour tes yeux :wink:

blea_local.log (11,1 Ko)

J’ai aussi le log update, si ca peut aider… il en manque (trop d’entrée car j’ai réinstaller le plugin/dependance plusieurs fois ?)
blea_update.log (30,6 Ko)

@ Jeandhom, après verif, je ne possède que des Shelly 1 (non PLUS) et Shelly RGBW2. D’après la doc celui la prend bien en charge le MQTT (c’est bien de ça qu’il s’agit pour implémenter la détection de nut ? ca reste obscure pour moi ca :sweat_smile: ) mais ne prend pas en charge le BLE.

11

Ce ne sont pas des Gen2.

Il faut un CPU ESP32 et les scripts.

Capture d’écran du 2023-09-06 11-50-51

12

Merci d’avoir confirmé ! :slight_smile:

Donc toujours bloqué… Il y’a un moyens de faire une desinstallation « propre » du plugin, c-a-d de vraiment tous supprimer, comme si il n’avait jamais été la ? C’est possible qu’une erreur ai eu lieux lors de ma première instal, et qu’elle reste quelque part (le cache ?), de sorte que toute reinstallation par la suite ne règle pas le problème ?

1 « J'aime »
13

Il aurait fallu coller les Logs entre balises pour mes yeux :wink:

Je ne comprends pas que tu ne vois pas ton Nutale pendant le scan.

En effet 5 fois ça éteint puis 5 fois ça rallume. Il faudrait le rallumer juste pendant le scan car je n’ai pas l’impression que le Nutale advertise toutes les minutes (vérifie dans les logs).

14

Comme ca ? :smiley:

0475|[2023-09-06 11:48:14.863]DEBUG : SCANNER------[(1, 'Flags', '06'), (3, 'Complete 16b Services', '00000900-0000-1000-8000-00805f9b34fb'), (9, 'Complete Local Name', 'nutale'), (22, '16b Service Data', '0009a4c1381c42d4160100010000')] True public a4:c1:38:1c:42:d4
0476|[2023-09-06 11:48:14.864]DEBUG : BeeWiSmartLite------manuf:  name:nutale data:0009a4c1381c42d4160100010000
0477|[2023-09-06 11:48:14.864]DEBUG : SCANNER------It's an unknown packet but not sent because this device is not Included and I'am not in learn mode a4:c1:38:1c:42:d4
0478|[2023-09-06 11:48:42.249]DEBUG : Send to jeedom :  {'heartbeat': 1, 'source': 'local', 'version': '2.9'}
0479|[2023-09-06 11:48:42.252]DEBUG : Starting new HTTP connection (1): 127.0.0.1:80
0480|[2023-09-06 11:48:42.262]DEBUG : http://127.0.0.1:80 "POST /plugins/blea/core/php/jeeBlea.php?apikey=7muZH8S9amGJ4WvAecpf24br1xtX5AUtBZ8DNkNtNf2RW4SybR1mkyQRLQv9w5Jt HTTP/1.1" 200 0
0481|[2023-09-06 11:48:44.100]DEBUG : SCANNER------Clearing seen
0482|[2023-09-06 11:48:44.165]DEBUG : SCANNER------[(1, 'Flags', '06'), (3, 'Complete 16b Services', '00000900-0000-1000-8000-00805f9b34fb'), (9, 'Complete Local Name', 'nutale'), (22, '16b Service Data', '0009a4c1381c42d4160100010000')] True public a4:c1:38:1c:42:d4
0483|[2023-09-06 11:48:44.165]DEBUG : BeeWiSmartLite------manuf:  name:nutale data:0009a4c1381c42d4160100010000

Je ne comprend pas non plus ^^’

Je viens d’essayer, aucun changement. Et comme tu peux voir plus haut, le nutale est bien repéré plusieurs fois par minute.

Est ce que comme je l’ai évoqué dans une autre réponse ca peut venir d’un erreur a l’installation « originelle » ? si oui comment y remédier ?
Et 2eme point, les heures du log ne correspondent pas a l’heures actuelle (décalage de +/-2h), ca peut avoir une incidence ?

15

Beaucoup mieux.

Tu as essayé d’inclure avec « tout », mais as tu tenté avec uniquement « inconnu »?

Réinstaller le plugin ne sert à rien 99 % du temps. Car si problème c’est dans les dépendances ou configuration.

Le décalage d’heure n’a également pas d’impact.

16

Oui, en inconnu seul ca ne fonctionne pas non plus.

J’ai relancer l’installation des dépendance, voici le log debug :

0066|[2023-09-06 12:30:07.775][INFO] : GLOBAL------Start blead
0067|[2023-09-06 12:30:07.775][INFO] : GLOBAL------Log level : debug
0068|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Socket port : 55008
0069|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Socket host : 127.0.0.1
0070|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Device : hci0
0071|[2023-09-06 12:30:07.776][INFO] : GLOBAL------PID file : /tmp/jeedom/blea/deamon.pid
0072|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Apikey : 7muZH8S9amGJ4WvAecpf24br1xtX5AUtBZ8DNkNtNf2RW4SybR1mkyQRLQv9w5Jt
0073|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Callback : http://127.0.0.1:80/plugins/blea/core/php/jeeBlea.php
0074|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Cycle : 0.3
0075|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Scan interval  : 29
0076|[2023-09-06 12:30:07.776][INFO] : GLOBAL------Number for no seen : 4
0077|[2023-09-06 12:30:07.777][INFO] : GLOBAL------Scan Mode : passive
0078|[2023-09-06 12:30:07.811][INFO] : LOADER------Import de la configuration devices.amazfitgtr
0079|[2023-09-06 12:30:07.812][INFO] : LOADER------Import de la configuration devices.aqualin
0080|[2023-09-06 12:30:07.815][INFO] : LOADER------Import de la configuration devices.awoxmesh
0081|[2023-09-06 12:30:07.837][INFO] : LOADER------Import de la configuration devices.beagle
0082|[2023-09-06 12:30:07.837][INFO] : LOADER------Import de la configuration devices.beewismartdoor
0083|[2023-09-06 12:30:07.838][INFO] : LOADER------Import de la configuration devices.beewismartlite
0084|[2023-09-06 12:30:07.840][INFO] : LOADER------Import de la configuration devices.blpnr
0085|[2023-09-06 12:30:07.841][INFO] : LOADER------Import de la configuration devices.divoompixoo
0086|[2023-09-06 12:30:07.856][DEBUG] : Impossible d'importer devices.divoompixoo : No module named 'bluetooth'
0087|[2023-09-06 12:30:07.857][INFO] : LOADER------Import de la configuration devices.divoomtimeboxmini
0088|[2023-09-06 12:30:07.860][DEBUG] : Impossible d'importer devices.divoomtimeboxmini : No module named 'bluetooth'
0089|[2023-09-06 12:30:07.860][INFO] : LOADER------Import de la configuration devices.dotti
0090|[2023-09-06 12:30:07.861][INFO] : LOADER------Import de la configuration devices.dreamscreen
0091|[2023-09-06 12:30:07.862][INFO] : LOADER------Import de la configuration devices.fitbit
0092|[2023-09-06 12:30:07.863][INFO] : LOADER------Import de la configuration devices.gigaset
0093|[2023-09-06 12:30:07.864][INFO] : LOADER------Import de la configuration devices.hector
0094|[2023-09-06 12:30:07.865][INFO] : LOADER------Import de la configuration devices.ibbq4
0095|[2023-09-06 12:30:07.866][INFO] : LOADER------Import de la configuration devices.ibbq6
0096|[2023-09-06 12:30:07.867][INFO] : LOADER------Import de la configuration devices.itag
0097|[2023-09-06 12:30:07.869][INFO] : LOADER------Import de la configuration devices.jinlin
0098|[2023-09-06 12:30:07.870][INFO] : LOADER------Import de la configuration devices.kst1
0099|[2023-09-06 12:30:07.871][INFO] : LOADER------Import de la configuration devices.logiswitch
0100|[2023-09-06 12:30:07.872][INFO] : LOADER------Import de la configuration devices.lywsd02
0101|[2023-09-06 12:30:07.873][INFO] : LOADER------Import de la configuration devices.lywsd03
0102|[2023-09-06 12:30:07.874][INFO] : LOADER------Import de la configuration devices.meyerdom2analog
0103|[2023-09-06 12:30:07.874][INFO] : LOADER------Import de la configuration devices.meyerdom4contacts
0104|[2023-09-06 12:30:07.875][INFO] : LOADER------Import de la configuration devices.meyerdomcontactvocal
0105|[2023-09-06 12:30:07.876][INFO] : LOADER------Import de la configuration devices.miband
0106|[2023-09-06 12:30:07.877][INFO] : LOADER------Import de la configuration devices.miband2
0107|[2023-09-06 12:30:07.879][INFO] : LOADER------Import de la configuration devices.miband3
0108|[2023-09-06 12:30:07.880][INFO] : LOADER------Import de la configuration devices.miband4
0109|[2023-09-06 12:30:07.881][INFO] : LOADER------Import de la configuration devices.miflora
0110|[2023-09-06 12:30:07.882][INFO] : LOADER------Import de la configuration devices.miscale
0111|[2023-09-06 12:30:07.884][INFO] : LOADER------Import de la configuration devices.miscale2
0112|[2023-09-06 12:30:07.885][INFO] : LOADER------Import de la configuration devices.myfox
0113|[2023-09-06 12:30:07.886][INFO] : LOADER------Import de la configuration devices.niu
0114|[2023-09-06 12:30:07.887][INFO] : LOADER------Import de la configuration devices.noke
0115|[2023-09-06 12:30:07.888][INFO] : LOADER------Import de la configuration devices.nut
0116|[2023-09-06 12:30:07.889][INFO] : LOADER------Import de la configuration devices.parrotplant
0117|[2023-09-06 12:30:07.890][INFO] : LOADER------Import de la configuration devices.pixoo
0118|[2023-09-06 12:30:07.890][INFO] : LOADER------Import de la configuration devices.pixoo.divoom_image
0119|[2023-09-06 12:30:07.892][DEBUG] : Impossible d'importer devices.pixoo.divoom_image : No module named 'PIL'
0120|[2023-09-06 12:30:07.893][INFO] : LOADER------Import de la configuration devices.pixoo.messages
0121|[2023-09-06 12:30:07.893][INFO] : LOADER------Import de la configuration devices.pixoo.timebox
0122|[2023-09-06 12:30:07.894][DEBUG] : Impossible d'importer devices.pixoo.timebox : No module named 'bluetooth'
0123|[2023-09-06 12:30:07.895][INFO] : LOADER------Import de la configuration devices.pixoo.timeboximage
0124|[2023-09-06 12:30:07.895][INFO] : LOADER------Import de la configuration devices.playbulb
0125|[2023-09-06 12:30:07.896][INFO] : LOADER------Import de la configuration devices.ropot
0126|[2023-09-06 12:30:07.897][INFO] : LOADER------Import de la configuration devices.ruuvi
0127|[2023-09-06 12:30:07.898][INFO] : LOADER------Import de la configuration devices.smartplug
0128|[2023-09-06 12:30:07.899][INFO] : LOADER------Import de la configuration devices.tb05
0129|[2023-09-06 12:30:07.899][INFO] : LOADER------Import de la configuration devices.ticatag
0130|[2023-09-06 12:30:07.900][INFO] : LOADER------Import de la configuration devices.tile
0131|[2023-09-06 12:30:07.901][INFO] : LOADER------Import de la configuration devices.timebox
0132|[2023-09-06 12:30:07.901][INFO] : LOADER------Import de la configuration devices.timebox.divoom_image
0133|[2023-09-06 12:30:07.903][DEBUG] : Impossible d'importer devices.timebox.divoom_image : No module named 'PIL'
0134|[2023-09-06 12:30:07.903][INFO] : LOADER------Import de la configuration devices.timebox.messages
0135|[2023-09-06 12:30:07.904][INFO] : LOADER------Import de la configuration devices.timebox.timebox
0136|[2023-09-06 12:30:07.905][DEBUG] : Impossible d'importer devices.timebox.timebox : No module named 'bluetooth'
0137|[2023-09-06 12:30:07.905][INFO] : LOADER------Import de la configuration devices.timebox.timeboximage
0138|[2023-09-06 12:30:07.906][INFO] : LOADER------Import de la configuration devices.wistiki
0139|[2023-09-06 12:30:07.906][INFO] : LOADER------Import de la configuration devices.xiaomiht
0140|[2023-09-06 12:30:07.907][INFO] : LOADER------Import de la configuration devices.yeelight
0141|[2023-09-06 12:30:07.908][INFO] : LOADER------Import de la configuration devices.yeelightcandela
0142|[2023-09-06 12:30:07.941][DEBUG] : Writing PID 24506 to /tmp/jeedom/blea/deamon.pid
0143|[2023-09-06 12:30:07.943][DEBUG] : Init request module v2.21.0
0144|[2023-09-06 12:30:07.951][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
0145|[2023-09-06 12:30:07.959][DEBUG] : http://127.0.0.1:80 "GET /plugins/blea/core/php/jeeBlea.php?apikey=7muZH8S9amGJ4WvAecpf24br1xtX5AUtBZ8DNkNtNf2RW4SybR1mkyQRLQv9w5Jt HTTP/1.1" 200 0
0146|[2023-09-06 12:30:07.961][DEBUG] : Socket interface started
0147|[2023-09-06 12:30:07.962][DEBUG] : LoopNetServer Thread started
0148|[2023-09-06 12:30:07.962][DEBUG] : Listening on: [127.0.0.1:55008]
0149|[2023-09-06 12:30:07.963][INFO] : GLOBAL------Start listening...
0150|[2023-09-06 12:30:07.963][INFO] : GLOBAL------Preparing Scanner...
0151|[2023-09-06 12:30:07.964][DEBUG] : Send to jeedom :  {'learn_mode': 0, 'source': 'local'}
0152|[2023-09-06 12:30:07.968][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
0153|[2023-09-06 12:30:07.970][DEBUG] : GLOBAL------Read Socket Thread Launched
0154|[2023-09-06 12:30:07.974][DEBUG] : GLOBAL------Read Device Thread Launched
0155|[2023-09-06 12:30:07.975][DEBUG] : GLOBAL------Heartbeat Thread Launched
0156|[2023-09-06 12:30:07.976][DEBUG] : Send to jeedom :  {'started': 1, 'source': 'local', 'version': '2.9'}
0157|[2023-09-06 12:30:07.979][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
0158|[2023-09-06 12:30:07.983][DEBUG] : http://127.0.0.1:80 "POST /plugins/blea/core/php/jeeBlea.php?apikey=7muZH8S9amGJ4WvAecpf24br1xtX5AUtBZ8DNkNtNf2RW4SybR1mkyQRLQv9w5Jt HTTP/1.1" 200 0
0159|[2023-09-06 12:30:07.994][DEBUG] : Client connected to [127.0.0.1:49412]
0160|[2023-09-06 12:30:07.994][DEBUG] : Message read from socket: b'{"apikey":"7muZH8S9amGJ4WvAecpf24br1xtX5AUtBZ8DNkNtNf2RW4SybR1mkyQRLQv9w5Jt","cmd":"ready"}'
0161|[2023-09-06 12:30:07.994][DEBUG] : Client disconnected from [127.0.0.1:49412]
0162|[2023-09-06 12:30:07.995][DEBUG] : http://127.0.0.1:80 "POST /plugins/blea/core/php/jeeBlea.php?apikey=7muZH8S9amGJ4WvAecpf24br1xtX5AUtBZ8DNkNtNf2RW4SybR1mkyQRLQv9w5Jt HTTP/1.1" 200 0
0163|[2023-09-06 12:30:08.269][DEBUG] : SOCKET-READ------Message received in socket JEEDOM_SOCKET_MESSAGE
0164|[2023-09-06 12:30:08.269][DEBUG] : SOCKET-READ------Received command from jeedom : ready
0165|[2023-09-06 12:30:08.270][DEBUG] : Daemon is ready
0166|[2023-09-06 12:30:09.148][DEBUG] : SCANNER------[(1, 'Flags', '06'), (9, 'Complete Local Name', 'net'), (255, 'Manufacturer', 'a806013030303030513142414332393745')] True public b8:8c:29:cb:29:7f
0167|[2023-09-06 12:30:09.148][DEBUG] : BeeWiSmartLite------manuf: a806013030303030513142414332393745 name:net data:
0168|[2023-09-06 12:30:09.149][DEBUG] : SCANNER------It's an unknown packet but not sent because this device is not Included and I'am not in learn mode b8:8c:29:cb:29:7f
0169|[2023-09-06 12:30:09.193][DEBUG] : SCANNER------[(3, 'Complete 16b Services', '0000fe9f-0000-1000-8000-00805f9b34fb'), (22, '16b Service Data', '9ffe0000000000000000000000000000000000000000')] True random 49:82:07:26:5e:88
0170|[2023-09-06 12:30:09.194][DEBUG] : BeeWiSmartLite------manuf:  name: data:9ffe0000000000000000000000000000000000000000
0171|[2023-09-06 12:30:09.194][DEBUG] : SCANNER------It's an unknown packet but not sent because this device is not Included and I'am not in learn mode 49:82:07:26:5e:88
0172|[2023-09-06 12:30:09.900][DEBUG] : SCANNER------[(1, 'Flags', '02'), (3, 'Complete 16b Services', '0000feb8-0000-1000-8000-00805f9b34fb')] True random 41:d9:79:ca:54:a9
0173|[2023-09-06 12:30:09.900][DEBUG] : BeeWiSmartLite------manuf:  name: data:
0174|[2023-09-06 12:30:09.901][DEBUG] : SCANNER------It's an unknown packet but not sent because this device is not Included and I'am not in learn mode 41:d9:79:ca:54:a9
0175|[2023-09-06 12:30:10.122][DEBUG] : SCANNER------[(255, 'Manufacturer',

Apres avoir cliquez « mettre a jour les dépendances sur les antennes », mettre si je pense que c’est uniquement pour le cas d’antenne externe ca non ?

Enfin, toujours rien… je commence a désespérer :smiling_face_with_tear: :smiling_face_with_tear:

17

Et les logs « update »

0000|copying src/PIL/SgiImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0001|copying src/PIL/ImageFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0002|copying src/PIL/ImageShow.py -> build/lib.linux-aarch64-cpython-37/PIL
0003|copying src/PIL/ImageTk.py -> build/lib.linux-aarch64-cpython-37/PIL
0004|copying src/PIL/ImageCms.py -> build/lib.linux-aarch64-cpython-37/PIL
0005|copying src/PIL/ImageMode.py -> build/lib.linux-aarch64-cpython-37/PIL
0006|copying src/PIL/BlpImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0007|copying src/PIL/IcnsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0008|copying src/PIL/ImageEnhance.py -> build/lib.linux-aarch64-cpython-37/PIL
0009|copying src/PIL/MspImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0010|copying src/PIL/ImagePalette.py -> build/lib.linux-aarch64-cpython-37/PIL
0011|copying src/PIL/ImagePath.py -> build/lib.linux-aarch64-cpython-37/PIL
0012|copying src/PIL/McIdasImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0013|copying src/PIL/MicImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0014|copying src/PIL/_version.py -> build/lib.linux-aarch64-cpython-37/PIL
0015|copying src/PIL/ImageDraw2.py -> build/lib.linux-aarch64-cpython-37/PIL
0016|copying src/PIL/TgaImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0017|copying src/PIL/features.py -> build/lib.linux-aarch64-cpython-37/PIL
0018|copying src/PIL/SunImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0019|copying src/PIL/GbrImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0020|copying src/PIL/CurImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0021|copying src/PIL/PyAccess.py -> build/lib.linux-aarch64-cpython-37/PIL
0022|copying src/PIL/PpmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0023|copying src/PIL/_tkinter_finder.py -> build/lib.linux-aarch64-cpython-37/PIL
0024|copying src/PIL/EpsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0025|copying src/PIL/WalImageFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0026|copying src/PIL/PSDraw.py -> build/lib.linux-aarch64-cpython-37/PIL
0027|copying src/PIL/ImageColor.py -> build/lib.linux-aarch64-cpython-37/PIL
0028|copying src/PIL/ContainerIO.py -> build/lib.linux-aarch64-cpython-37/PIL
0029|copying src/PIL/XVThumbImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0030|copying src/PIL/Hdf5StubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0031|copying src/PIL/BufrStubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0032|copying src/PIL/GimpPaletteFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0033|copying src/PIL/ImageFont.py -> build/lib.linux-aarch64-cpython-37/PIL
0034|copying src/PIL/JpegImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0035|copying src/PIL/TiffImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0036|copying src/PIL/PaletteFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0037|copying src/PIL/ImageSequence.py -> build/lib.linux-aarch64-cpython-37/PIL
0038|copying src/PIL/GribStubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0039|copying src/PIL/_util.py -> build/lib.linux-aarch64-cpython-37/PIL
0040|copying src/PIL/FliImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0041|copying src/PIL/ImageChops.py -> build/lib.linux-aarch64-cpython-37/PIL
0042|copying src/PIL/WmfImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0043|copying src/PIL/__init__.py -> build/lib.linux-aarch64-cpython-37/PIL
0044|copying src/PIL/MpoImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0045|copying src/PIL/FitsStubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0046|copying src/PIL/FontFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0047|copying src/PIL/ImageMath.py -> build/lib.linux-aarch64-cpython-37/PIL
0048|copying src/PIL/XpmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0049|copying src/PIL/__main__.py -> build/lib.linux-aarch64-cpython-37/PIL
0050|copying src/PIL/WebPImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0051|copying src/PIL/PdfParser.py -> build/lib.linux-aarch64-cpython-37/PIL
0052|copying src/PIL/GifImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0053|copying src/PIL/TarIO.py -> build/lib.linux-aarch64-cpython-37/PIL
0054|copying src/PIL/PixarImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0055|copying src/PIL/BmpImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0056|copying src/PIL/ImageFilter.py -> build/lib.linux-aarch64-cpython-37/PIL
0057|copying src/PIL/GdImageFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0058|copying src/PIL/IcoImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0059|copying src/PIL/MpegImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0060|copying src/PIL/DcxImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0061|copying src/PIL/_binary.py -> build/lib.linux-aarch64-cpython-37/PIL
0062|copying src/PIL/ImageDraw.py -> build/lib.linux-aarch64-cpython-37/PIL
0063|copying src/PIL/ImageTransform.py -> build/lib.linux-aarch64-cpython-37/PIL
0064|copying src/PIL/XbmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0065|copying src/PIL/SpiderImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0066|copying src/PIL/Jpeg2KImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0067|copying src/PIL/ImageQt.py -> build/lib.linux-aarch64-cpython-37/PIL
0068|copying src/PIL/JpegPresets.py -> build/lib.linux-aarch64-cpython-37/PIL
0069|copying src/PIL/FpxImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0070|copying src/PIL/ImageGrab.py -> build/lib.linux-aarch64-cpython-37/PIL
0071|copying src/PIL/BdfFontFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0072|copying src/PIL/TiffTags.py -> build/lib.linux-aarch64-cpython-37/PIL
0073|copying src/PIL/Image.py -> build/lib.linux-aarch64-cpython-37/PIL
0074|copying src/PIL/PalmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0075|copying src/PIL/GimpGradientFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0076|copying src/PIL/DdsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0077|copying src/PIL/IptcImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0078|copying src/PIL/FitsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0079|copying src/PIL/PdfImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0080|copying src/PIL/FtexImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0081|copying src/PIL/PngImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0082|running egg_info
0083|writing src/Pillow.egg-info/PKG-INFO
0084|writing dependency_links to src/Pillow.egg-info/dependency_links.txt
0085|writing requirements to src/Pillow.egg-info/requires.txt
0086|writing top-level names to src/Pillow.egg-info/top_level.txt
0087|reading manifest file 'src/Pillow.egg-info/SOURCES.txt'
0088|reading manifest template 'MANIFEST.in'
0089|warning: no files found matching '*.c'
0090|warning: no files found matching '*.h'
0091|warning: no files found matching '*.sh'
0092|warning: no previously-included files found matching '.appveyor.yml'
0093|warning: no previously-included files found matching '.clang-format'
0094|warning: no previously-included files found matching '.coveragerc'
0095|warning: no previously-included files found matching '.editorconfig'
0096|warning: no previously-included files found matching '.readthedocs.yml'
0097|warning: no previously-included files found matching 'codecov.yml'
0098|warning: no previously-included files found matching 'renovate.json'
0099|warning: no previously-included files matching '.git*' found anywhere in distribution
0100|warning: no previously-included files matching '*.pyc' found anywhere in distribution
0101|warning: no previously-included files matching '*.so' found anywhere in distribution
0102|no previously-included directories found matching '.ci'
0103|adding license file 'LICENSE'
0104|writing manifest file 'src/Pillow.egg-info/SOURCES.txt'
0105|running build_ext
0106|The headers or library files could not be found for jpeg,
0107|a required dependency when compiling Pillow from source.
0108|Please see the install instructions at:
0109|https://pillow.readthedocs.io/en/latest/installation.html
0110|Traceback (most recent call last):
0111|File "/tmp/pip-install-astyzb8n/pillow/setup.py", line 997, in <module>
0112|zip_safe=not (debug_build() or PLATFORM_MINGW),
0113|File "/usr/local/lib/python3.7/dist-packages/setuptools/__init__.py", line 107, in setup
0114|return distutils.core.setup(**attrs)
0115|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/core.py", line 185, in setup
0116|return run_commands(dist)
0117|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/core.py", line 201, in run_commands
0118|dist.run_commands()
0119|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 969, in run_commands
0120|self.run_command(cmd)
0121|File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 1234, in run_command
0122|super().run_command(command)
0123|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
0124|cmd_obj.run()
0125|File "/usr/lib/python3/dist-packages/wheel/bdist_wheel.py", line 188, in run
0126|self.run_command('build')
0127|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py", line 318, in run_command
0128|self.distribution.run_command(command)
0129|File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 1234, in run_command
0130|super().run_command(command)
0131|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
0132|cmd_obj.run()
0133|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/command/build.py", line 131, in run
0134|self.run_command(cmd_name)
0135|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py", line 318, in run_command
0136|self.distribution.run_command(command)
0137|File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 1234, in run_command
0138|super().run_command(command)
0139|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
0140|cmd_obj.run()
0141|File "/usr/local/lib/python3.7/dist-packages/setuptools/command/build_ext.py", line 84, in run
0142|_build_ext.run(self)
0143|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/command/build_ext.py", line 345, in run
0144|self.build_extensions()
0145|File "/tmp/pip-install-astyzb8n/pillow/setup.py", line 809, in build_extensions
0146|raise RequiredDependencyException(f)
0147|__main__.RequiredDependencyException: jpeg
0148|During handling of the above exception, another exception occurred:
0149|Traceback (most recent call last):
0150|File "<string>", line 1, in <module>
0151|File "/tmp/pip-install-astyzb8n/pillow/setup.py", line 1010, in <module>
0152|raise RequiredDependencyException(msg)
0153|__main__.RequiredDependencyException:
0154|The headers or library files could not be found for jpeg,
0155|a required dependency when compiling Pillow from source.
0156|Please see the install instructions at:
0157|https://pillow.readthedocs.io/en/latest/installation.html
0158|----------------------------------------
0159|Failed building wheel for pillow
0160|Running setup.py clean for pillow
0161|Failed to build pillow
0162|Installing collected packages: pillow
0163|Running setup.py install for pillow: started
0164|Running setup.py install for pillow: finished with status 'error'
0165|Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-astyzb8n/pillow/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('
0166|', '
0167|');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-5pp8i0ei/install-record.txt --single-version-externally-managed --compile:
0168|running install
0169|/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated.
0170|!!
0171|********************************************************************************
0172|Please avoid running ``setup.py`` directly.
0173|Instead, use pypa/build, pypa/installer or other
0174|standards-based tools.
0175|See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details.
0176|********************************************************************************
0177|!!
0178|self.initialize_options()
0179|running build
0180|running build_py
0181|creating build
0182|creating build/lib.linux-aarch64-cpython-37
0183|creating build/lib.linux-aarch64-cpython-37/PIL
0184|copying src/PIL/ExifTags.py -> build/lib.linux-aarch64-cpython-37/PIL
0185|copying src/PIL/ImageStat.py -> build/lib.linux-aarch64-cpython-37/PIL
0186|copying src/PIL/ImageMorph.py -> build/lib.linux-aarch64-cpython-37/PIL
0187|copying src/PIL/ImageWin.py -> build/lib.linux-aarch64-cpython-37/PIL
0188|copying src/PIL/ImImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0189|copying src/PIL/QoiImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0190|copying src/PIL/PcxImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0191|copying src/PIL/PcdImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0192|copying src/PIL/PcfFontFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0193|copying src/PIL/ImtImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0194|copying src/PIL/ImageOps.py -> build/lib.linux-aarch64-cpython-37/PIL
0195|copying src/PIL/PsdImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0196|copying src/PIL/_deprecate.py -> build/lib.linux-aarch64-cpython-37/PIL
0197|copying src/PIL/SgiImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0198|copying src/PIL/ImageFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0199|copying src/PIL/ImageShow.py -> build/lib.linux-aarch64-cpython-37/PIL
0200|copying src/PIL/ImageTk.py -> build/lib.linux-aarch64-cpython-37/PIL
0201|copying src/PIL/ImageCms.py -> build/lib.linux-aarch64-cpython-37/PIL
0202|copying src/PIL/ImageMode.py -> build/lib.linux-aarch64-cpython-37/PIL
0203|copying src/PIL/BlpImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0204|copying src/PIL/IcnsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0205|copying src/PIL/ImageEnhance.py -> build/lib.linux-aarch64-cpython-37/PIL
0206|copying src/PIL/MspImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0207|copying src/PIL/ImagePalette.py -> build/lib.linux-aarch64-cpython-37/PIL
0208|copying src/PIL/ImagePath.py -> build/lib.linux-aarch64-cpython-37/PIL
0209|copying src/PIL/McIdasImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0210|copying src/PIL/MicImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0211|copying src/PIL/_version.py -> build/lib.linux-aarch64-cpython-37/PIL
0212|copying src/PIL/ImageDraw2.py -> build/lib.linux-aarch64-cpython-37/PIL
0213|copying src/PIL/TgaImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0214|copying src/PIL/features.py -> build/lib.linux-aarch64-cpython-37/PIL
0215|copying src/PIL/SunImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0216|copying src/PIL/GbrImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0217|copying src/PIL/CurImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0218|copying src/PIL/PyAccess.py -> build/lib.linux-aarch64-cpython-37/PIL
0219|copying src/PIL/PpmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0220|copying src/PIL/_tkinter_finder.py -> build/lib.linux-aarch64-cpython-37/PIL
0221|copying src/PIL/EpsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0222|copying src/PIL/WalImageFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0223|copying src/PIL/PSDraw.py -> build/lib.linux-aarch64-cpython-37/PIL
0224|copying src/PIL/ImageColor.py -> build/lib.linux-aarch64-cpython-37/PIL
0225|copying src/PIL/ContainerIO.py -> build/lib.linux-aarch64-cpython-37/PIL
0226|copying src/PIL/XVThumbImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0227|copying src/PIL/Hdf5StubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0228|copying src/PIL/BufrStubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0229|copying src/PIL/GimpPaletteFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0230|copying src/PIL/ImageFont.py -> build/lib.linux-aarch64-cpython-37/PIL
0231|copying src/PIL/JpegImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0232|copying src/PIL/TiffImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0233|copying src/PIL/PaletteFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0234|copying src/PIL/ImageSequence.py -> build/lib.linux-aarch64-cpython-37/PIL
0235|copying src/PIL/GribStubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0236|copying src/PIL/_util.py -> build/lib.linux-aarch64-cpython-37/PIL
0237|copying src/PIL/FliImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0238|copying src/PIL/ImageChops.py -> build/lib.linux-aarch64-cpython-37/PIL
0239|copying src/PIL/WmfImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0240|copying src/PIL/__init__.py -> build/lib.linux-aarch64-cpython-37/PIL
0241|copying src/PIL/MpoImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0242|copying src/PIL/FitsStubImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0243|copying src/PIL/FontFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0244|copying src/PIL/ImageMath.py -> build/lib.linux-aarch64-cpython-37/PIL
0245|copying src/PIL/XpmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0246|copying src/PIL/__main__.py -> build/lib.linux-aarch64-cpython-37/PIL
0247|copying src/PIL/WebPImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0248|copying src/PIL/PdfParser.py -> build/lib.linux-aarch64-cpython-37/PIL
0249|copying src/PIL/GifImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0250|copying src/PIL/TarIO.py -> build/lib.linux-aarch64-cpython-37/PIL
0251|copying src/PIL/PixarImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0252|copying src/PIL/BmpImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0253|copying src/PIL/ImageFilter.py -> build/lib.linux-aarch64-cpython-37/PIL
0254|copying src/PIL/GdImageFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0255|copying src/PIL/IcoImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0256|copying src/PIL/MpegImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0257|copying src/PIL/DcxImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0258|copying src/PIL/_binary.py -> build/lib.linux-aarch64-cpython-37/PIL
0259|copying src/PIL/ImageDraw.py -> build/lib.linux-aarch64-cpython-37/PIL
0260|copying src/PIL/ImageTransform.py -> build/lib.linux-aarch64-cpython-37/PIL
0261|copying src/PIL/XbmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0262|copying src/PIL/SpiderImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0263|copying src/PIL/Jpeg2KImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0264|copying src/PIL/ImageQt.py -> build/lib.linux-aarch64-cpython-37/PIL
0265|copying src/PIL/JpegPresets.py -> build/lib.linux-aarch64-cpython-37/PIL
0266|copying src/PIL/FpxImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0267|copying src/PIL/ImageGrab.py -> build/lib.linux-aarch64-cpython-37/PIL
0268|copying src/PIL/BdfFontFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0269|copying src/PIL/TiffTags.py -> build/lib.linux-aarch64-cpython-37/PIL
0270|copying src/PIL/Image.py -> build/lib.linux-aarch64-cpython-37/PIL
0271|copying src/PIL/PalmImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0272|copying src/PIL/GimpGradientFile.py -> build/lib.linux-aarch64-cpython-37/PIL
0273|copying src/PIL/DdsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0274|copying src/PIL/IptcImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0275|copying src/PIL/FitsImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0276|copying src/PIL/PdfImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0277|copying src/PIL/FtexImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0278|copying src/PIL/PngImagePlugin.py -> build/lib.linux-aarch64-cpython-37/PIL
0279|running egg_info
0280|writing src/Pillow.egg-info/PKG-INFO
0281|writing dependency_links to src/Pillow.egg-info/dependency_links.txt
0282|writing requirements to src/Pillow.egg-info/requires.txt
0283|writing top-level names to src/Pillow.egg-info/top_level.txt
0284|reading manifest file 'src/Pillow.egg-info/SOURCES.txt'
0285|reading manifest template 'MANIFEST.in'
0286|warning: no files found matching '*.c'
0287|warning: no files found matching '*.h'
0288|warning: no files found matching '*.sh'
0289|warning: no previously-included files found matching '.appveyor.yml'
0290|warning: no previously-included files found matching '.clang-format'
0291|warning: no previously-included files found matching '.coveragerc'
0292|warning: no previously-included files found matching '.editorconfig'
0293|warning: no previously-included files found matching '.readthedocs.yml'
0294|warning: no previously-included files found matching 'codecov.yml'
0295|warning: no previously-included files found matching 'renovate.json'
0296|warning: no previously-included files matching '.git*' found anywhere in distribution
0297|warning: no previously-included files matching '*.pyc' found anywhere in distribution
0298|warning: no previously-included files matching '*.so' found anywhere in distribution
0299|no previously-included directories found matching '.ci'
0300|adding license file 'LICENSE'
0301|writing manifest file 'src/Pillow.egg-info/SOURCES.txt'
0302|running build_ext
0303|The headers or library files could not be found for jpeg,
0304|a required dependency when compiling Pillow from source.
0305|Please see the install instructions at:
0306|https://pillow.readthedocs.io/en/latest/installation.html
0307|Traceback (most recent call last):
0308|File "/tmp/pip-install-astyzb8n/pillow/setup.py", line 997, in <module>
0309|zip_safe=not (debug_build() or PLATFORM_MINGW),
0310|File "/usr/local/lib/python3.7/dist-packages/setuptools/__init__.py", line 107, in setup
0311|return distutils.core.setup(**attrs)
0312|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/core.py", line 185, in setup
0313|return run_commands(dist)
0314|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/core.py", line 201, in run_commands
0315|dist.run_commands()
0316|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 969, in run_commands
0317|self.run_command(cmd)
0318|File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 1234, in run_command
0319|super().run_command(command)
0320|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
0321|cmd_obj.run()
0322|File "/usr/local/lib/python3.7/dist-packages/setuptools/command/install.py", line 74, in run
0323|return orig.install.run(self)
0324|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/command/install.py", line 697, in run
0325|self.run_command('build')
0326|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py", line 318, in run_command
0327|self.distribution.run_command(command)
0328|File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 1234, in run_command
0329|super().run_command(command)
0330|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
0331|cmd_obj.run()
0332|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/command/build.py", line 131, in run
0333|self.run_command(cmd_name)
0334|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py", line 318, in run_command
0335|self.distribution.run_command(command)
0336|File "/usr/local/lib/python3.7/dist-packages/setuptools/dist.py", line 1234, in run_command
0337|super().run_command(command)
0338|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/dist.py", line 988, in run_command
0339|cmd_obj.run()
0340|File "/usr/local/lib/python3.7/dist-packages/setuptools/command/build_ext.py", line 84, in run
0341|_build_ext.run(self)
0342|File "/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/command/build_ext.py", line 345, in run
0343|self.build_extensions()
0344|File "/tmp/pip-install-astyzb8n/pillow/setup.py", line 809, in build_extensions
0345|raise RequiredDependencyException(f)
0346|__main__.RequiredDependencyException: jpeg
0347|During handling of the above exception, another exception occurred:
0348|Traceback (most recent call last):
0349|File "<string>", line 1, in <module>
0350|File "/tmp/pip-install-astyzb8n/pillow/setup.py", line 1010, in <module>
0351|raise RequiredDependencyException(msg)
0352|__main__.RequiredDependencyException:
0353|The headers or library files could not be found for jpeg,
0354|a required dependency when compiling Pillow from source.
0355|Please see the install instructions at:
0356|https://pillow.readthedocs.io/en/latest/installation.html
0357|----------------------------------------
0358|Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-astyzb8n/pillow/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('
0359|', '
0360|');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-5pp8i0ei/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-install-astyzb8n/pillow/
0361|Requirement already satisfied: numpy in /usr/local/lib/python3.7/dist-packages (1.21.6)
0362|Requirement already satisfied: bluepy in /usr/local/lib/python3.7/dist-packages (1.3.0)
0363|Cloning into 'bluepy'...
0364|running build
0365|running build_py
0366|creating build
0367|creating build/lib
0368|creating build/lib/bluepy
0369|copying bluepy/sensortag.py -> build/lib/bluepy
0370|copying bluepy/thingy52.py -> build/lib/bluepy
0371|copying bluepy/scanner.py -> build/lib/bluepy
0372|copying bluepy/btle.py -> build/lib/bluepy
0373|copying bluepy/__init__.py -> build/lib/bluepy
0374|copying bluepy/blescan.py -> build/lib/bluepy
0375|copying bluepy/scan_fuzz.py -> build/lib/bluepy
0376|copying bluepy/get_services.py -> build/lib/bluepy
0377|copying bluepy/uuids.json -> build/lib/bluepy
0378|copying bluepy/bluez-src.tgz -> build/lib/bluepy
0379|copying bluepy/bluepy-helper.c -> build/lib/bluepy
0380|copying bluepy/Makefile -> build/lib/bluepy
0381|/usr/local/lib/python3.7/dist-packages/setuptools/dist.py:745: SetuptoolsDeprecationWarning: Invalid dash-separated options
0382|!!
0383|********************************************************************************
0384|Usage of dash-separated 'description-file' will not be supported in future
0385|versions. Please use the underscore name 'description_file' instead.
0386|By 2023-Sep-26, you need to update your project and remove deprecated calls
0387|or your builds will no longer be supported.
0388|See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details.
0389|********************************************************************************
0390|!!
0391|opt = self.warn_dash_deprecation(opt, section)
0392|running install
0393|Working dir is /tmp/bluepy
0394|execute make -C ./bluepy clean
0395|execute make -C bluepy -j1
0396|running build
0397|running build_py
0398|copying bluepy/bluepy-helper -> build/lib/bluepy
0399|running install_lib
0400|copying build/lib/bluepy/sensortag.py -> /usr/lib/python3.7/site-packages/bluepy
0401|copying build/lib/bluepy/uuids.json -> /usr/lib/python3.7/site-packages/bluepy
0402|copying build/lib/bluepy/thingy52.py -> /usr/lib/python3.7/site-packages/bluepy
0403|copying build/lib/bluepy/Makefile -> /usr/lib/python3.7/site-packages/bluepy
0404|copying build/lib/bluepy/bluepy-helper -> /usr/lib/python3.7/site-packages/bluepy
0405|copying build/lib/bluepy/scanner.py -> /usr/lib/python3.7/site-packages/bluepy
0406|copying build/lib/bluepy/btle.py -> /usr/lib/python3.7/site-packages/bluepy
0407|copying build/lib/bluepy/__init__.py -> /usr/lib/python3.7/site-packages/bluepy
0408|copying build/lib/bluepy/bluez-src.tgz -> /usr/lib/python3.7/site-packages/bluepy
0409|copying build/lib/bluepy/blescan.py -> /usr/lib/python3.7/site-packages/bluepy
0410|copying build/lib/bluepy/scan_fuzz.py -> /usr/lib/python3.7/site-packages/bluepy
0411|copying build/lib/bluepy/get_services.py -> /usr/lib/python3.7/site-packages/bluepy
0412|copying build/lib/bluepy/bluepy-helper.c -> /usr/lib/python3.7/site-packages/bluepy
0413|byte-compiling /usr/lib/python3.7/site-packages/bluepy/sensortag.py to sensortag.cpython-37.pyc
0414|byte-compiling /usr/lib/python3.7/site-packages/bluepy/thingy52.py to thingy52.cpython-37.pyc
0415|byte-compiling /usr/lib/python3.7/site-packages/bluepy/scanner.py to scanner.cpython-37.pyc
0416|byte-compiling /usr/lib/python3.7/site-packages/bluepy/btle.py to btle.cpython-37.pyc
0417|byte-compiling /usr/lib/python3.7/site-packages/bluepy/__init__.py to __init__.cpython-37.pyc
0418|byte-compiling /usr/lib/python3.7/site-packages/bluepy/blescan.py to blescan.cpython-37.pyc
0419|byte-compiling /usr/lib/python3.7/site-packages/bluepy/scan_fuzz.py to scan_fuzz.cpython-37.pyc
0420|byte-compiling /usr/lib/python3.7/site-packages/bluepy/get_services.py to get_services.cpython-37.pyc
0421|running install_egg_info
0422|running egg_info
0423|creating bluepy.egg-info
0424|writing bluepy.egg-info/PKG-INFO
0425|writing dependency_links to bluepy.egg-info/dependency_links.txt
0426|writing entry points to bluepy.egg-info/entry_points.txt
0427|writing top-level names to bluepy.egg-info/top_level.txt
0428|writing manifest file 'bluepy.egg-info/SOURCES.txt'
0429|reading manifest file 'bluepy.egg-info/SOURCES.txt'
0430|adding license file 'LICENSE.txt'
0431|writing manifest file 'bluepy.egg-info/SOURCES.txt'
0432|removing '/usr/lib/python3.7/site-packages/bluepy-1.1.4-py3.7.egg-info' (and everything under it)
0433|Copying bluepy.egg-info to /usr/lib/python3.7/site-packages/bluepy-1.1.4-py3.7.egg-info
0434|running install_scripts
0435|Installing blescan script to /usr/bin
0436|Installing sensortag script to /usr/bin
0437|Installing thingy52 script to /usr/bin
0438|/usr/local/lib/python3.7/dist-packages/setuptools/dist.py:745: SetuptoolsDeprecationWarning: Invalid dash-separated options
0439|!!
0440|********************************************************************************
0441|Usage of dash-separated 'description-file' will not be supported in future
0442|versions. Please use the underscore name 'description_file' instead.
0443|By 2023-Sep-26, you need to update your project and remove deprecated calls
0444|or your builds will no longer be supported.
0445|See https://setuptools.pypa.io/en/latest/userguide/declarative_config.html for details.
0446|********************************************************************************
0447|!!
0448|opt = self.warn_dash_deprecation(opt, section)
0449|/usr/local/lib/python3.7/dist-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated.
0450|!!
0451|********************************************************************************
0452|Please avoid running ``setup.py`` directly.
0453|Instead, use pypa/build, pypa/installer or other
0454|standards-based tools.
0455|See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details.
0456|********************************************************************************
0457|!!
0458|self.initialize_options()
0459|Requirement already satisfied: cryptography in /usr/lib/python3/dist-packages (2.6.1)
0460|Requirement already satisfied: pycrypto in /usr/lib/python3/dist-packages (2.6.1)
0461|********************************************************
0462|*			 Installation terminée					*
0463|********************************************************
18

Bonjour,

Vous n’avez aucun appareil chez vous qui aurait couplé les nut ? Même avec ou sans l’application de gestion des nut ?

19

y a quand même pas mal de failed dans le log.

20

Non aucun… J’ai réinitialisé le nut, en suivant les infos de ce poste : Pairage Nut

Le ble de mon telephone est eteint… Rien de parasite chez moi, et je laisse le nut a 5cm de l’antenne