RFXCOM qui tombe au bout de quelques minutes

Bonjour,

J’ai un problème avec mon RFXCOM qui refuse de rester UP plus de quelques minutes.
Je n’ai aucune log qui me permettent de savoir ce qu’il se passe (ou du moins je n’en trouve pas…).

J’ai essayé d’abord une install en docker/synology, je viens de passer en Freebox Delta.
J’ai essayé de changer de port USB (sur Syno).

Toujours pareil.

Je ne sais plus quoi faire…

Voici quelques infos de configuration et les logs (mais qui n’affichent pas grand chose).

Merci pour votre aide si vous avez une idée.

Nicolas

Bonjour,

Attention de bien formater les infos données: Comment nous aider à vous aider - ou Comment poser une bonne question?
les logs dans un bloc Texte préformaté et pas dans capture + suppression des infos sensibles.

Pour le problème, décoche la case « Rédémarrer le démon » (c’est peut-être ce process là qui redémarre le démon s’il n’y a pas eu d’update sur les équipements) et dans le panneau « Démon », active la gestion automatique.

Bonjour.

Une personne a récemment eu ce problème et l’a solutionné en mettant à jour le firmware du rfxcom.
Cette action se réalise sur Windows.

Désolé pour l’erreur de post.

j’ai fait les 2 modifs mais ça ne change rien

voici les nouvelles logs

[2020-09-07 17:39:35][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N HTTP/1.1" 200 0
[2020-09-08 11:47:47][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 11:48:07][ERROR] : Erreur sur la fonction deamon_start du plugin : Vous devez attendre au moins 45 secondes entre deux lancements du démon. Dernier lancement : 2020-09-08 11:47:47
[2020-09-08 11:54:33][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 12:05:57][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 12:35:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 12:40:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 12:45:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 12:50:05][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 12:55:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:00:06][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:05:03][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:10:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:15:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:20:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:25:03][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:30:05][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:35:03][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-09-08 13:38:46][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement

Il faudrait (re)mettre le log en debug parce que là on ne voit plus rien
Avez-vous essayé la mise à jour du firmware du rfxcom comme proposé par Fabrice?

non je vais essaye ce soir…

log mis à jour (apiKey modifié)

ça tombe souvent après cette ligne

[2020-09-08 13:19:56][DEBUG] : http://127.0.0.1:80 « POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1 » 200 0

[2020-09-08 13:18:12][DEBUG] : Writing PID 22971 to /tmp/jeedom/rfxcom/deamon.pid
[2020-09-08 13:18:12][DEBUG] : Init request module v2.21.0
[2020-09-08 13:18:12][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-08 13:18:12][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1" 200 0
[2020-09-08 13:18:12][DEBUG] : Init serial module v3.4
[2020-09-08 13:18:12][DEBUG] : Start listening...
[2020-09-08 13:18:12][DEBUG] : Socket interface started
[2020-09-08 13:18:12][DEBUG] : Open serial port on device: /dev/ttyUSB0, rate 38400, timeout : 9
[2020-09-08 13:18:12][DEBUG] : Open Serialport
[2020-09-08 13:18:12][DEBUG] : LoopNetServer Thread started
[2020-09-08 13:18:12][DEBUG] : Listening on: [127.0.0.1:55000]
[2020-09-08 13:18:12][DEBUG] : flushOutput serial port
[2020-09-08 13:18:12][DEBUG] : flushInput serial port
[2020-09-08 13:18:12][DEBUG] : flushOutput serial port
[2020-09-08 13:18:12][DEBUG] : flushInput serial port
[2020-09-08 13:18:12][DEBUG] : Read Socket Thread Launched
[2020-09-08 13:18:12][DEBUG] : Read Device Thread Launched
[2020-09-08 13:18:13][DEBUG] : Send rfxcomd_reset
[2020-09-08 13:18:13][DEBUG] : Write data to serial port : 0D 00 00 00 00 00 00 00 00 00 00 00 00 00
[2020-09-08 13:18:13][DEBUG] : Sleep 1 sec
[2020-09-08 13:18:14][DEBUG] : flushInput serial port
[2020-09-08 13:18:14][DEBUG] : Send get status test
[2020-09-08 13:18:14][DEBUG] : Write data to serial port : 0D 00 00 01 02 00 00 00 00 00 00 00 00 00
[2020-09-08 13:18:14][DEBUG] : Message: 0D 01 00 01 02 53 F3 00 0C 2F 00 01 03 1C
[2020-09-08 13:18:14][DEBUG] : Decode : 0D 01 00 01 02 53 F3 00 0C 2F 00 01 03 1C
[2020-09-08 13:18:14][DEBUG] : Test message: 0D 01 00 01 02 53 F3 00 0C 2F 00 01 03 1C
[2020-09-08 13:18:14][DEBUG] : PacketType: 01
[2020-09-08 13:18:14][DEBUG] : SubType: 00
[2020-09-08 13:18:14][DEBUG] : SeqNbr: 01
[2020-09-08 13:18:14][DEBUG] : Id1: 02
[2020-09-08 13:18:14][DEBUG] : Id2: 53
[2020-09-08 13:18:14][DEBUG] : Subtype			= Interface response
[2020-09-08 13:18:14][DEBUG] : Sequence nbr		= 01
[2020-09-08 13:18:14][DEBUG] : Response on cmnd	= Get Status, return firmware versions and configuration of the interface.
[2020-09-08 13:18:14][DEBUG] : Transceiver type	= 433.92MHz
[2020-09-08 13:18:14][DEBUG] : Firmware version	= 243
[2020-09-08 13:18:14][DEBUG] : Protocols:
[2020-09-08 13:18:14][DEBUG] : Undecoded                 Disabled
[2020-09-08 13:18:14][DEBUG] : Imagintronix,Opus         Disabled
[2020-09-08 13:18:14][DEBUG] : Byron SX,SelectPlus       Disabled
[2020-09-08 13:18:14][DEBUG] : RSL,Revolt                Disabled
[2020-09-08 13:18:14][DEBUG] : Lightning4                Disabled
[2020-09-08 13:18:14][DEBUG] : FineOffset / Viking       Disabled
[2020-09-08 13:18:14][DEBUG] : Rubicson,Alecto,Banggood  Disabled
[2020-09-08 13:18:14][DEBUG] : AE Blyss                  Disabled
[2020-09-08 13:18:14][DEBUG] : Blinds T1/T2/T3/T4        Disabled
[2020-09-08 13:18:14][DEBUG] : Blinds T0                 Disabled
[2020-09-08 13:18:14][DEBUG] :                           Disabled
[2020-09-08 13:18:14][DEBUG] : Legrand CAD               Disabled
[2020-09-08 13:18:14][DEBUG] : La Crosse                 Enabled
[2020-09-08 13:18:14][DEBUG] : Hideki,TFA,Cresta,UPM     Enabled
[2020-09-08 13:18:14][DEBUG] : AD Lightwave RF           Disabled
[2020-09-08 13:18:14][DEBUG] : Mertik                    Disabled
[2020-09-08 13:18:14][DEBUG] : Visonic                   Disabled
[2020-09-08 13:18:14][DEBUG] : ATI/cartelectronic        Disabled
[2020-09-08 13:18:14][DEBUG] : Oregon Scientific         Enabled
[2020-09-08 13:18:14][DEBUG] : Meiantech,Atlantic        Disabled
[2020-09-08 13:18:14][DEBUG] : HomeEasy EU               Enabled
[2020-09-08 13:18:14][DEBUG] : AC                        Enabled
[2020-09-08 13:18:14][DEBUG] : ARC                       Enabled
[2020-09-08 13:18:14][DEBUG] : X10                       Enabled
[2020-09-08 13:18:14][DEBUG] : FunkBus                   Disabled
[2020-09-08 13:18:14][DEBUG] : Decode data : {'subtype': '00', 'packettype': '01', 'raw': '0D0100010253F3000C2F0001031C'}
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42250]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"77AA75"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42250]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42252]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"53F27E"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42252]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42254]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"27ACAC"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42254]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42256]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"139BDC"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42256]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42258]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"022662F6"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42258]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42260]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"3110F469"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42260]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42262]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"77FF86"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42262]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42264]
[2020-09-08 15:18:15][INFO] : Démon RFXcom lancé
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"7016F6"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42264]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42266]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"BD01"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42266]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42268]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"1245F215"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42268]
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'77AA75'}
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42270]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"2447CF53"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42270]
[2020-09-08 13:18:15][DEBUG] : Client connected to [127.0.0.1:42272]
[2020-09-08 13:18:15][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0l","cmd":"add","device":{"id":"D804"}}
[2020-09-08 13:18:15][DEBUG] : Client disconnected from [127.0.0.1:42272]
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'53F27E'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'27ACAC'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'139BDC'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'022662F6'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'3110F469'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'77FF86'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'7016F6'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'BD01'}
[2020-09-08 13:18:15][DEBUG] : Firmware is 243
[2020-09-08 13:18:15][DEBUG] : Type is 0
[2020-09-08 13:18:15][DEBUG] : Disable protocol 0
[2020-09-08 13:18:15][DEBUG] : Disable protocol 1
[2020-09-08 13:18:15][DEBUG] : Disable protocol 2
[2020-09-08 13:18:15][DEBUG] : Disable protocol 3
[2020-09-08 13:18:15][DEBUG] : Disable protocol 4
[2020-09-08 13:18:15][DEBUG] : Disable protocol 5
[2020-09-08 13:18:15][DEBUG] : Disable protocol 6
[2020-09-08 13:18:15][DEBUG] : Disable protocol 7
[2020-09-08 13:18:15][DEBUG] : Disable protocol 8
[2020-09-08 13:18:15][DEBUG] : Disable protocol 9
[2020-09-08 13:18:15][DEBUG] : Disable protocol 10
[2020-09-08 13:18:15][DEBUG] : Disable protocol 11
[2020-09-08 13:18:15][DEBUG] : Enable protocol 12
[2020-09-08 13:18:15][DEBUG] : Enable protocol 13
[2020-09-08 13:18:15][DEBUG] : Disable protocol 14
[2020-09-08 13:18:15][DEBUG] : Disable protocol 15
[2020-09-08 13:18:15][DEBUG] : Disable protocol 16
[2020-09-08 13:18:15][DEBUG] : Disable protocol 17
[2020-09-08 13:18:15][DEBUG] : Enable protocol 18
[2020-09-08 13:18:15][DEBUG] : Disable protocol 19
[2020-09-08 13:18:15][DEBUG] : Enable protocol 20
[2020-09-08 13:18:15][DEBUG] : Enable protocol 21
[2020-09-08 13:18:15][DEBUG] : Enable protocol 22
[2020-09-08 13:18:15][DEBUG] : Enable protocol 23
[2020-09-08 13:18:15][DEBUG] : Disable protocol 24
[2020-09-08 13:18:15][DEBUG] : Disable protocol 25
[2020-09-08 13:18:15][DEBUG] : Disable protocol 26
[2020-09-08 13:18:15][DEBUG] : Disable protocol 27
[2020-09-08 13:18:15][DEBUG] : Disable protocol 28
[2020-09-08 13:18:15][DEBUG] : Disable protocol 29
[2020-09-08 13:18:15][DEBUG] : Disable protocol 30
[2020-09-08 13:18:15][DEBUG] : Disable protocol 31
[2020-09-08 13:18:15][DEBUG] : Disable protocol 32
[2020-09-08 13:18:15][DEBUG] : msg3: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'1245F215'}
[2020-09-08 13:18:15][DEBUG] : msg4: [0, 0, 0, 0, 1, 1, 0, 0] / 0c
[2020-09-08 13:18:15][DEBUG] : msg5: [0, 0, 1, 0, 1, 1, 1, 1] / 2f
[2020-09-08 13:18:15][DEBUG] : msg6: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2020-09-08 13:18:15][DEBUG] : Command: 0d000002035300000c2f00000000
[2020-09-08 13:18:15][DEBUG] : Write data to serial port : 0D 00 00 02 03 53 00 00 0C 2F 00 00 00 00
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'2447CF53'}
[2020-09-08 13:18:15][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-08 13:18:15][DEBUG] : Add device : {u'id': u'D804'}
[2020-09-08 13:18:15][DEBUG] : Message: 0D 01 00 02 03 53 F3 00 0C 2F 00 01 03 1C
[2020-09-08 13:18:15][DEBUG] : Decode : 0D 01 00 02 03 53 F3 00 0C 2F 00 01 03 1C
[2020-09-08 13:18:15][DEBUG] : Test message: 0D 01 00 02 03 53 F3 00 0C 2F 00 01 03 1C
[2020-09-08 13:18:15][DEBUG] : PacketType: 01
[2020-09-08 13:18:15][DEBUG] : SubType: 00
[2020-09-08 13:18:15][DEBUG] : SeqNbr: 02
[2020-09-08 13:18:15][DEBUG] : Id1: 03
[2020-09-08 13:18:15][DEBUG] : Id2: 53
[2020-09-08 13:18:15][DEBUG] : Subtype			= Interface response
[2020-09-08 13:18:15][DEBUG] : Sequence nbr		= 02
[2020-09-08 13:18:15][DEBUG] : Response on cmnd	= Set mode msg1-msg5, return firmware versions and configuration of the interface.
[2020-09-08 13:18:15][DEBUG] : Transceiver type	= 433.92MHz
[2020-09-08 13:18:15][DEBUG] : Firmware version	= 243
[2020-09-08 13:18:15][DEBUG] : Protocols:
[2020-09-08 13:18:15][DEBUG] : Undecoded                 Disabled
[2020-09-08 13:18:15][DEBUG] : Imagintronix,Opus         Disabled
[2020-09-08 13:18:15][DEBUG] : Byron SX,SelectPlus       Disabled
[2020-09-08 13:18:15][DEBUG] : RSL,Revolt                Disabled
[2020-09-08 13:18:15][DEBUG] : Lightning4                Disabled
[2020-09-08 13:18:15][DEBUG] : FineOffset / Viking       Disabled
[2020-09-08 13:18:15][DEBUG] : Rubicson,Alecto,Banggood  Disabled
[2020-09-08 13:18:15][DEBUG] : AE Blyss                  Disabled
[2020-09-08 13:18:15][DEBUG] : Blinds T1/T2/T3/T4        Disabled
[2020-09-08 13:18:15][DEBUG] : Blinds T0                 Disabled
[2020-09-08 13:18:15][DEBUG] :                           Disabled
[2020-09-08 13:18:15][DEBUG] : Legrand CAD               Disabled
[2020-09-08 13:18:15][DEBUG] : La Crosse                 Enabled
[2020-09-08 13:18:15][DEBUG] : Hideki,TFA,Cresta,UPM     Enabled
[2020-09-08 13:18:15][DEBUG] : AD Lightwave RF           Disabled
[2020-09-08 13:18:15][DEBUG] : Mertik                    Disabled
[2020-09-08 13:18:15][DEBUG] : Visonic                   Disabled
[2020-09-08 13:18:15][DEBUG] : ATI/cartelectronic        Disabled
[2020-09-08 13:18:15][DEBUG] : Oregon Scientific         Enabled
[2020-09-08 13:18:15][DEBUG] : Meiantech,Atlantic        Disabled
[2020-09-08 13:18:15][DEBUG] : HomeEasy EU               Enabled
[2020-09-08 13:18:15][DEBUG] : AC                        Enabled
[2020-09-08 13:18:15][DEBUG] : ARC                       Enabled
[2020-09-08 13:18:15][DEBUG] : X10                       Enabled
[2020-09-08 13:18:15][DEBUG] : FunkBus                   Disabled
[2020-09-08 13:18:15][DEBUG] : Decode data : {'subtype': '00', 'packettype': '01', 'raw': '0D0100020353F3000C2F0001031C'}
[2020-09-08 13:18:16][DEBUG] : All is ok, sending start
[2020-09-08 13:18:16][DEBUG] : Write data to serial port : 0D 00 00 02 07 00 00 00 00 00 00 00 00 00
[2020-09-08 13:18:16][DEBUG] : Message: 14 01 07 02 07 43 6F 70 79 72 69 67 68 74 20 52 46 58 43 4F 4D
[2020-09-08 13:18:16][DEBUG] : Decode : 14 01 07 02 07 43 6F 70 79 72 69 67 68 74 20 52 46 58 43 4F 4D
[2020-09-08 13:18:16][DEBUG] : Test message: 14 01 07 02 07 43 6F 70 79 72 69 67 68 74 20 52 46 58 43 4F 4D
[2020-09-08 13:18:16][DEBUG] : PacketType: 01
[2020-09-08 13:18:16][DEBUG] : SubType: 07
[2020-09-08 13:18:16][DEBUG] : SeqNbr: 02
[2020-09-08 13:18:16][DEBUG] : Id1: 07
[2020-09-08 13:18:16][DEBUG] : Id2: 43
[2020-09-08 13:18:16][DEBUG] : Subtype			= Interface response
[2020-09-08 13:18:16][DEBUG] : Response is Copyright RFXCOM
[2020-09-08 13:18:17][DEBUG] : All is ok, Ready for operation
[2020-09-08 13:18:30][DEBUG] : Message: 0A 52 01 00 D8 04 01 0C 2A 00 79
[2020-09-08 13:18:30][DEBUG] : Decode : 0A 52 01 00 D8 04 01 0C 2A 00 79
[2020-09-08 13:18:30][DEBUG] : Test message: 0A 52 01 00 D8 04 01 0C 2A 00 79
[2020-09-08 13:18:30][DEBUG] : PacketType: 52
[2020-09-08 13:18:30][DEBUG] : SubType: 01
[2020-09-08 13:18:30][DEBUG] : SeqNbr: 00
[2020-09-08 13:18:30][DEBUG] : Id1: D8
[2020-09-08 13:18:30][DEBUG] : Id2: 04
[2020-09-08 13:18:30][DEBUG] : Decode data : {'temperature': '26.8', 'raw': '0A520100D804010C2A0079', 'battery': '9', 'signal': '7', 'humidity': '42', 'subtype': '01', 'packettype': '52', 'id': 'D804'}
[2020-09-08 13:18:30][DEBUG] : Send to jeedom : {'devices': {'D80452': {'temperature': '26.8', 'raw': '0A520100D804010C2A0079', 'battery': '9', 'signal': '7', 'humidity': '42', 'subtype': '01', 'packettype': '52', 'id': 'D804'}}}
[2020-09-08 13:18:30][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-08 13:18:30][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1" 200 0
[2020-09-08 13:18:32][DEBUG] : Message: 0A 52 01 01 BD 01 01 00 32 00 79
[2020-09-08 13:18:32][DEBUG] : Decode : 0A 52 01 01 BD 01 01 00 32 00 79
[2020-09-08 13:18:32][DEBUG] : Test message: 0A 52 01 01 BD 01 01 00 32 00 79
[2020-09-08 13:18:32][DEBUG] : PacketType: 52
[2020-09-08 13:18:32][DEBUG] : SubType: 01
[2020-09-08 13:18:32][DEBUG] : SeqNbr: 01
[2020-09-08 13:18:32][DEBUG] : Id1: BD
[2020-09-08 13:18:32][DEBUG] : Id2: 01
[2020-09-08 13:18:32][DEBUG] : Decode data : {'temperature': '25.6', 'raw': '0A520101BD010100320079', 'battery': '9', 'signal': '7', 'humidity': '50', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}
[2020-09-08 13:18:33][DEBUG] : Send to jeedom : {'devices': {'BD0152': {'temperature': '25.6', 'raw': '0A520101BD010100320079', 'battery': '9', 'signal': '7', 'humidity': '50', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}}}
[2020-09-08 13:18:33][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-08 13:18:33][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1" 200 0
[2020-09-08 13:19:11][DEBUG] : Message: 0A 52 01 02 BD 01 01 00 32 00 79
[2020-09-08 13:19:11][DEBUG] : Decode : 0A 52 01 02 BD 01 01 00 32 00 79
[2020-09-08 13:19:11][DEBUG] : Test message: 0A 52 01 02 BD 01 01 00 32 00 79
[2020-09-08 13:19:11][DEBUG] : PacketType: 52
[2020-09-08 13:19:11][DEBUG] : SubType: 01
[2020-09-08 13:19:11][DEBUG] : SeqNbr: 02
[2020-09-08 13:19:11][DEBUG] : Id1: BD
[2020-09-08 13:19:11][DEBUG] : Id2: 01
[2020-09-08 13:19:11][DEBUG] : Decode data : {'temperature': '25.6', 'raw': '0A520102BD010100320079', 'battery': '9', 'signal': '7', 'humidity': '50', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}
[2020-09-08 13:19:12][DEBUG] : Send to jeedom : {'devices': {'BD0152': {'temperature': '25.6', 'raw': '0A520102BD010100320079', 'battery': '9', 'signal': '7', 'humidity': '50', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}}}
[2020-09-08 13:19:12][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-08 13:19:12][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1" 200 0
[2020-09-08 13:19:13][DEBUG] : Message: 0A 52 01 03 D8 04 01 0C 2A 00 79
[2020-09-08 13:19:13][DEBUG] : Decode : 0A 52 01 03 D8 04 01 0C 2A 00 79
[2020-09-08 13:19:13][DEBUG] : Test message: 0A 52 01 03 D8 04 01 0C 2A 00 79
[2020-09-08 13:19:13][DEBUG] : PacketType: 52
[2020-09-08 13:19:13][DEBUG] : SubType: 01
[2020-09-08 13:19:13][DEBUG] : SeqNbr: 03
[2020-09-08 13:19:13][DEBUG] : Id1: D8
[2020-09-08 13:19:13][DEBUG] : Id2: 04
[2020-09-08 13:19:13][DEBUG] : Decode data : {'temperature': '26.8', 'raw': '0A520103D804010C2A0079', 'battery': '9', 'signal': '7', 'humidity': '42', 'subtype': '01', 'packettype': '52', 'id': 'D804'}
[2020-09-08 13:19:13][DEBUG] : Send to jeedom : {'devices': {'D80452': {'temperature': '26.8', 'raw': '0A520103D804010C2A0079', 'battery': '9', 'signal': '7', 'humidity': '42', 'subtype': '01', 'packettype': '52', 'id': 'D804'}}}
[2020-09-08 13:19:13][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-08 13:19:13][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1" 200 0
[2020-09-08 13:19:50][DEBUG] : Message: 0A 52 01 04 BD 01 01 00 32 00 79
[2020-09-08 13:19:50][DEBUG] : Decode : 0A 52 01 04 BD 01 01 00 32 00 79
[2020-09-08 13:19:50][DEBUG] : Test message: 0A 52 01 04 BD 01 01 00 32 00 79
[2020-09-08 13:19:50][DEBUG] : PacketType: 52
[2020-09-08 13:19:50][DEBUG] : SubType: 01
[2020-09-08 13:19:50][DEBUG] : SeqNbr: 04
[2020-09-08 13:19:50][DEBUG] : Id1: BD
[2020-09-08 13:19:50][DEBUG] : Id2: 01
[2020-09-08 13:19:50][DEBUG] : Decode data : {'temperature': '25.6', 'raw': '0A520104BD010100320079', 'battery': '9', 'signal': '7', 'humidity': '50', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}
[2020-09-08 13:19:51][DEBUG] : Send to jeedom : {'devices': {'BD0152': {'temperature': '25.6', 'raw': '0A520104BD010100320079', 'battery': '9', 'signal': '7', 'humidity': '50', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}}}
[2020-09-08 13:19:51][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-08 13:19:51][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1" 200 0
[2020-09-08 13:19:56][DEBUG] : Message: 0A 52 01 05 D8 04 01 0C 2A 00 79
[2020-09-08 13:19:56][DEBUG] : Decode : 0A 52 01 05 D8 04 01 0C 2A 00 79
[2020-09-08 13:19:56][DEBUG] : Test message: 0A 52 01 05 D8 04 01 0C 2A 00 79
[2020-09-08 13:19:56][DEBUG] : PacketType: 52
[2020-09-08 13:19:56][DEBUG] : SubType: 01
[2020-09-08 13:19:56][DEBUG] : SeqNbr: 05
[2020-09-08 13:19:56][DEBUG] : Id1: D8
[2020-09-08 13:19:56][DEBUG] : Id2: 04
[2020-09-08 13:19:56][DEBUG] : Decode data : {'temperature': '26.8', 'raw': '0A520105D804010C2A0079', 'battery': '9', 'signal': '7', 'humidity': '42', 'subtype': '01', 'packettype': '52', 'id': 'D804'}
[2020-09-08 13:19:56][DEBUG] : Send to jeedom : {'devices': {'D80452': {'temperature': '26.8', 'raw': '0A520105D804010C2A0079', 'battery': '9', 'signal': '7', 'humidity': '42', 'subtype': '01', 'packettype': '52', 'id': 'D804'}}}
[2020-09-08 13:19:56][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-08 13:19:56][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0l HTTP/1.1" 200 0

Prévoir aussi à tester avec un nouveau câble USB.

nouveau cable, firmware updaté même problèmes… :frowning:

Vous avez d’autres pistes ?

[2020-09-11 11:41:35][DEBUG] : ATI/cartelectronic        Disabled
[2020-09-11 11:41:35][DEBUG] : Oregon Scientific         Enabled
[2020-09-11 11:41:35][DEBUG] : Meiantech,Atlantic        Disabled
[2020-09-11 11:41:35][DEBUG] : HomeEasy EU               Enabled
[2020-09-11 11:41:35][DEBUG] : AC                        Enabled
[2020-09-11 11:41:35][DEBUG] : ARC                       Enabled
[2020-09-11 11:41:35][DEBUG] : X10                       Enabled
[2020-09-11 11:41:35][DEBUG] : FunkBus                   Disabled
[2020-09-11 11:41:35][DEBUG] : Decode data : {'subtype': '00', 'packettype': '01', 'raw': '14010002035319000C2F0001031C03000000000000'}
[2020-09-11 11:41:36][DEBUG] : All is ok, sending start
[2020-09-11 11:41:36][DEBUG] : Write data to serial port : 0D 00 00 02 07 00 00 00 00 00 00 00 00 00
[2020-09-11 11:41:36][DEBUG] : Message: 14 01 07 02 07 43 6F 70 79 72 69 67 68 74 20 52 46 58 43 4F 4D
[2020-09-11 11:41:36][DEBUG] : Decode : 14 01 07 02 07 43 6F 70 79 72 69 67 68 74 20 52 46 58 43 4F 4D
[2020-09-11 11:41:36][DEBUG] : Test message: 14 01 07 02 07 43 6F 70 79 72 69 67 68 74 20 52 46 58 43 4F 4D
[2020-09-11 11:41:36][DEBUG] : PacketType: 01
[2020-09-11 11:41:36][DEBUG] : SubType: 07
[2020-09-11 11:41:36][DEBUG] : SeqNbr: 02
[2020-09-11 11:41:36][DEBUG] : Id1: 07
[2020-09-11 11:41:36][DEBUG] : Id2: 43
[2020-09-11 11:41:36][DEBUG] : Subtype			= Interface response
[2020-09-11 11:41:36][DEBUG] : Response is Copyright RFXCOM
[2020-09-11 11:41:37][DEBUG] : All is ok, Ready for operation
[2020-09-11 11:41:49][DEBUG] : Message: 0A 52 01 00 D8 04 01 4A 23 02 79
[2020-09-11 11:41:49][DEBUG] : Decode : 0A 52 01 00 D8 04 01 4A 23 02 79
[2020-09-11 11:41:49][DEBUG] : Test message: 0A 52 01 00 D8 04 01 4A 23 02 79
[2020-09-11 11:41:49][DEBUG] : PacketType: 52
[2020-09-11 11:41:49][DEBUG] : SubType: 01
[2020-09-11 11:41:49][DEBUG] : SeqNbr: 00
[2020-09-11 11:41:49][DEBUG] : Id1: D8
[2020-09-11 11:41:49][DEBUG] : Id2: 04
[2020-09-11 11:41:49][DEBUG] : Decode data : {'temperature': '33.0', 'raw': '0A520100D804014A230279', 'battery': '9', 'signal': '7', 'humidity': '35', 'subtype': '01', 'packettype': '52', 'id': 'D804'}
[2020-09-11 11:41:49][DEBUG] : Send to jeedom : {'devices': {'D80452': {'temperature': '33.0', 'raw': '0A520100D804014A230279', 'battery': '9', 'signal': '7', 'humidity': '35', 'subtype': '01', 'packettype': '52', 'id': 'D804'}}}
[2020-09-11 11:41:49][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-11 11:41:49][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N HTTP/1.1" 200 0
[2020-09-11 11:42:12][DEBUG] : Message: 0A 52 01 01 BD 01 01 10 3D 00 69
[2020-09-11 11:42:12][DEBUG] : Decode : 0A 52 01 01 BD 01 01 10 3D 00 69
[2020-09-11 11:42:12][DEBUG] : Test message: 0A 52 01 01 BD 01 01 10 3D 00 69
[2020-09-11 11:42:12][DEBUG] : PacketType: 52
[2020-09-11 11:42:12][DEBUG] : SubType: 01
[2020-09-11 11:42:12][DEBUG] : SeqNbr: 01
[2020-09-11 11:42:12][DEBUG] : Id1: BD
[2020-09-11 11:42:12][DEBUG] : Id2: 01
[2020-09-11 11:42:12][DEBUG] : Decode data : {'temperature': '27.2', 'raw': '0A520101BD0101103D0069', 'battery': '9', 'signal': '6', 'humidity': '61', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}
[2020-09-11 11:42:12][DEBUG] : Send to jeedom : {'devices': {'BD0152': {'temperature': '27.2', 'raw': '0A520101BD0101103D0069', 'battery': '9', 'signal': '6', 'humidity': '61', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}}}
[2020-09-11 11:42:12][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-11 11:42:12][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N HTTP/1.1" 200 0
[2020-09-11 11:42:32][DEBUG] : Message: 0A 52 01 02 D8 04 01 4A 23 02 79
[2020-09-11 11:42:32][DEBUG] : Decode : 0A 52 01 02 D8 04 01 4A 23 02 79
[2020-09-11 11:42:32][DEBUG] : Test message: 0A 52 01 02 D8 04 01 4A 23 02 79
[2020-09-11 11:42:32][DEBUG] : PacketType: 52
[2020-09-11 11:42:32][DEBUG] : SubType: 01
[2020-09-11 11:42:32][DEBUG] : SeqNbr: 02
[2020-09-11 11:42:32][DEBUG] : Id1: D8
[2020-09-11 11:42:32][DEBUG] : Id2: 04
[2020-09-11 11:42:32][DEBUG] : Decode data : {'temperature': '33.0', 'raw': '0A520102D804014A230279', 'battery': '9', 'signal': '7', 'humidity': '35', 'subtype': '01', 'packettype': '52', 'id': 'D804'}
[2020-09-11 11:42:32][DEBUG] : Send to jeedom : {'devices': {'D80452': {'temperature': '33.0', 'raw': '0A520102D804014A230279', 'battery': '9', 'signal': '7', 'humidity': '35', 'subtype': '01', 'packettype': '52', 'id': 'D804'}}}
[2020-09-11 11:42:32][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-11 11:42:32][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N HTTP/1.1" 200 0
[2020-09-11 11:42:51][DEBUG] : Message: 0A 52 01 03 BD 01 01 10 3D 00 69
[2020-09-11 11:42:51][DEBUG] : Decode : 0A 52 01 03 BD 01 01 10 3D 00 69
[2020-09-11 11:42:51][DEBUG] : Test message: 0A 52 01 03 BD 01 01 10 3D 00 69
[2020-09-11 11:42:51][DEBUG] : PacketType: 52
[2020-09-11 11:42:51][DEBUG] : SubType: 01
[2020-09-11 11:42:51][DEBUG] : SeqNbr: 03
[2020-09-11 11:42:51][DEBUG] : Id1: BD
[2020-09-11 11:42:51][DEBUG] : Id2: 01
[2020-09-11 11:42:51][DEBUG] : Decode data : {'temperature': '27.2', 'raw': '0A520103BD0101103D0069', 'battery': '9', 'signal': '6', 'humidity': '61', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}
[2020-09-11 11:42:51][DEBUG] : Send to jeedom : {'devices': {'BD0152': {'temperature': '27.2', 'raw': '0A520103BD0101103D0069', 'battery': '9', 'signal': '6', 'humidity': '61', 'subtype': '01', 'packettype': '52', 'id': 'BD01'}}}
[2020-09-11 11:42:51][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-11 11:42:51][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N HTTP/1.1" 200 0
[2020-09-11 11:43:15][DEBUG] : Message: 0A 52 01 04 D8 04 01 4A 23 02 79
[2020-09-11 11:43:15][DEBUG] : Decode : 0A 52 01 04 D8 04 01 4A 23 02 79
[2020-09-11 11:43:15][DEBUG] : Test message: 0A 52 01 04 D8 04 01 4A 23 02 79
[2020-09-11 11:43:15][DEBUG] : PacketType: 52
[2020-09-11 11:43:15][DEBUG] : SubType: 01
[2020-09-11 11:43:15][DEBUG] : SeqNbr: 04
[2020-09-11 11:43:15][DEBUG] : Id1: D8
[2020-09-11 11:43:15][DEBUG] : Id2: 04
[2020-09-11 11:43:15][DEBUG] : Decode data : {'temperature': '33.0', 'raw': '0A520104D804014A230279', 'battery': '9', 'signal': '7', 'humidity': '35', 'subtype': '01', 'packettype': '52', 'id': 'D804'}
[2020-09-11 11:43:15][DEBUG] : Send to jeedom : {'devices': {'D80452': {'temperature': '33.0', 'raw': '0A520104D804014A230279', 'battery': '9', 'signal': '7', 'humidity': '35', 'subtype': '01', 'packettype': '52', 'id': 'D804'}}}
[2020-09-11 11:43:15][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-11 11:43:15][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N HTTP/1.1" 200 0
[2020-09-11 11:43:30][DEBUG] : Message: 0A 52 01 05 BD 01 01 10 3D 00 79
[2020-09-11 11:43:30][DEBUG] : Decode : 0A 52 01 05 BD 01 01 10 3D 00 79
[2020-09-11 11:43:30][DEBUG] : Test message: 0A 52 01 05 BD 01 01 10 3D 00 79
[2020-09-11 11:55:05][INFO] : Start rfxcomd
[2020-09-11 11:55:05][INFO] : Log level : debug
[2020-09-11 11:55:05][INFO] : Socket port : 55000
[2020-09-11 11:55:05][INFO] : Socket host : 127.0.0.1
[2020-09-11 11:55:05][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2020-09-11 11:55:05][INFO] : Device : /dev/ttyUSB0
[2020-09-11 11:55:05][INFO] : Apikey : GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N
[2020-09-11 11:55:05][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2020-09-11 11:55:05][INFO] : Cycle : 0.3
[2020-09-11 11:55:05][INFO] : Serial rate : 38400
[2020-09-11 11:55:05][INFO] : Serial timeout : 9
[2020-09-11 11:55:05][INFO] : Protocol : 12,13,18,20,21,22,23
[2020-09-11 11:55:05][INFO] : Find device : /dev/ttyUSB0
[2020-09-11 11:55:05][DEBUG] : Writing PID 9519 to /tmp/jeedom/rfxcom/deamon.pid
[2020-09-11 11:55:05][DEBUG] : Init request module v2.21.0
[2020-09-11 11:55:05][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-09-11 11:55:05][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N HTTP/1.1" 200 0
[2020-09-11 11:55:05][DEBUG] : Init serial module v3.4
[2020-09-11 11:55:05][DEBUG] : Start listening...
[2020-09-11 11:55:05][DEBUG] : Socket interface started
[2020-09-11 11:55:05][DEBUG] : Open serial port on device: /dev/ttyUSB0, rate 38400, timeout : 9
[2020-09-11 11:55:05][DEBUG] : Open Serialport
[2020-09-11 11:55:05][DEBUG] : LoopNetServer Thread started
[2020-09-11 11:55:05][DEBUG] : Listening on: [127.0.0.1:55000]
[2020-09-11 11:55:05][DEBUG] : flushOutput serial port
[2020-09-11 11:55:05][DEBUG] : flushInput serial port
[2020-09-11 11:55:05][DEBUG] : flushOutput serial port
[2020-09-11 11:55:05][DEBUG] : flushInput serial port
[2020-09-11 11:55:05][DEBUG] : Read Socket Thread Launched
[2020-09-11 11:55:05][DEBUG] : Read Device Thread Launched
[2020-09-11 11:55:06][DEBUG] : Send rfxcomd_reset
[2020-09-11 11:55:06][DEBUG] : Write data to serial port : 0D 00 00 00 00 00 00 00 00 00 00 00 00 00
[2020-09-11 11:55:06][DEBUG] : Sleep 1 sec
[2020-09-11 11:55:07][DEBUG] : flushInput serial port
[2020-09-11 11:55:07][DEBUG] : Send get status test
[2020-09-11 11:55:07][DEBUG] : Write data to serial port : 0D 00 00 01 02 00 00 00 00 00 00 00 00 00
[2020-09-11 11:55:07][DEBUG] : Message: 14 01 00 01 02 53 19 00 0C 2F 00 01 03 1C 03 52 46 58 43 4F 4D
[2020-09-11 11:55:07][DEBUG] : Decode : 14 01 00 01 02 53 19 00 0C 2F 00 01 03 1C 03 52 46 58 43 4F 4D
[2020-09-11 11:55:07][DEBUG] : Test message: 14 01 00 01 02 53 19 00 0C 2F 00 01 03 1C 03 52 46
[2020-09-11 11:55:07][DEBUG] : Blinds T0                 Disabled
[2020-09-11 11:55:07][DEBUG] :                           Disabled
[2020-09-11 11:55:07][DEBUG] : Legrand CAD               Disabled
{"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"27ACAC"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47984]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:47986]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"139BDC"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47986]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:47988]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"022662F6"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47988]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:47990]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"3110F469"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47990]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:47992]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"77FF86"}}
[2020-09-11 13:55:08][INFO] : Démon RFXcom lancé
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47992]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:47994]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"7016F6"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47994]
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'77AA75'}
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:47996]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"BD01"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47996]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:47998]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"1245F215"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:47998]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:48000]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"2447CF53"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:48000]
[2020-09-11 11:55:08][DEBUG] : Client connected to [127.0.0.1:48002]
[2020-09-11 11:55:08][DEBUG] : Message read from socket: {"apikey":"GCCKsQ24tinEajlHL7N0lgUU2L5tQ19N","cmd":"add","device":{"id":"D804"}}
[2020-09-11 11:55:08][DEBUG] : Client disconnected from [127.0.0.1:48002]
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'53F27E'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'27ACAC'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'139BDC'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'022662F6'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'3110F469'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'77FF86'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'7016F6'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'BD01'}
[2020-09-11 11:55:08][DEBUG] : Firmware is 25
[2020-09-11 11:55:08][DEBUG] : Type is 3
[2020-09-11 11:55:08][DEBUG] : Disable protocol 0
[2020-09-11 11:55:08][DEBUG] : Disable protocol 1
[2020-09-11 11:55:08][DEBUG] : Disable protocol 2
[2020-09-11 11:55:08][DEBUG] : Disable protocol 3
[2020-09-11 11:55:08][DEBUG] : Disable protocol 4
[2020-09-11 11:55:08][DEBUG] : Disable protocol 5
[2020-09-11 11:55:08][DEBUG] : Disable protocol 6
[2020-09-11 11:55:08][DEBUG] : Disable protocol 7
[2020-09-11 11:55:08][DEBUG] : Disable protocol 8
[2020-09-11 11:55:08][DEBUG] : Disable protocol 9
[2020-09-11 11:55:08][DEBUG] : Disable protocol 10
[2020-09-11 11:55:08][DEBUG] : Disable protocol 11
[2020-09-11 11:55:08][DEBUG] : Enable protocol 12
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'1245F215'}
[2020-09-11 11:55:08][DEBUG] : Enable protocol 13
[2020-09-11 11:55:08][DEBUG] : Disable protocol 14
[2020-09-11 11:55:08][DEBUG] : Disable protocol 15
[2020-09-11 11:55:08][DEBUG] : Disable protocol 16
[2020-09-11 11:55:08][DEBUG] : Disable protocol 17
[2020-09-11 11:55:08][DEBUG] : Enable protocol 18
[2020-09-11 11:55:08][DEBUG] : Disable protocol 19
[2020-09-11 11:55:08][DEBUG] : Enable protocol 20
[2020-09-11 11:55:08][DEBUG] : Enable protocol 21
[2020-09-11 11:55:08][DEBUG] : Enable protocol 22
[2020-09-11 11:55:08][DEBUG] : Enable protocol 23
[2020-09-11 11:55:08][DEBUG] : Disable protocol 24
[2020-09-11 11:55:08][DEBUG] : Disable protocol 25
[2020-09-11 11:55:08][DEBUG] : Disable protocol 26
[2020-09-11 11:55:08][DEBUG] : Disable protocol 27
[2020-09-11 11:55:08][DEBUG] : Disable protocol 28
[2020-09-11 11:55:08][DEBUG] : Disable protocol 29
[2020-09-11 11:55:08][DEBUG] : Disable protocol 30
[2020-09-11 11:55:08][DEBUG] : Disable protocol 31
[2020-09-11 11:55:08][DEBUG] : Disable protocol 32
[2020-09-11 11:55:08][DEBUG] : msg3: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2020-09-11 11:55:08][DEBUG] : msg4: [0, 0, 0, 0, 1, 1, 0, 0] / 0c
[2020-09-11 11:55:08][DEBUG] : msg5: [0, 0, 1, 0, 1, 1, 1, 1] / 2f
[2020-09-11 11:55:08][DEBUG] : msg6: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2020-09-11 11:55:08][DEBUG] : Command: 0d000002035300000c2f00000000
[2020-09-11 11:55:08][DEBUG] : Write data to serial port : 0D 00 00 02 03 53 00 00 0C 2F 00 00 00 00
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'2447CF53'}
[2020-09-11 11:55:08][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-09-11 11:55:08][DEBUG] : Add device : {u'id': u'D804'}

En refaisant une fresh install du RFXCOM avec un seul device ça ne tombe plus…

Donc ça vient d’un des device …

Ce sujet a été automatiquement fermé après 24 heures suivant le dernier commentaire. Aucune réponse n’est permise dorénavant.