Reconnaissance télécommande Intertechno

Plugins Programmation
1

Bonjour,

j’ai 3 anciennes prises Intertechno commandées par une télécommande à 6 boutons.

Rfxcom reconnait la télécommande mais ne m’affiche que le status (1 ou 0), je voudrais rajouter les commandes ON / Off mais je n’obtiens pas les codes / la trame comme je l’ai déjà fait sur des commandes Dio…

voici quelques photos pour illustrer ma situation.

Quelqu’un pourrait-il me conseiller ?
merci d’avance.
https://images-na.ssl-images-amazon.com/images/I/41EDw-MUT2L.AC.jpg

image
image1767×421 88.3 KB

image
image1951×395 60.3 KB

image

voici les logs, voir le « 4110 »:

image
image1048×114 11.2 KB

2

Bonjour,
Version RFXCOM , type Firmware …
Plugin RFXCOM date et version …

Page configuration du Plugin.

Log en mode debug lors du redémarrage du plugin.

Log de la télécommande …

Il faut que le log soit en mode débug …

3

Merci @Doubledom, pour ta réponse rapide, voici déjà la config protocole:

image
image834×197 15.8 KB

image
image1192×969 130 KB

4

et la version du Plug-in:

image
image1482×417 52.9 KB

5

Mets le log sur debug et redémarre le plugin, puis mets les logs …
Si tu peux faire un test ensuite en appuyant sur touches télécdes …

Devrait être du type pour :
cde ON
07 10 00 00 ID CMND 01 00 avec ID toi 41 CMND N° du BP
cde OFF
07 10 00 00 ID CMND 00 00

Donc faire
07100000 #ID# #GROUP# 0100 pour ON

et remplir la case « Groupe » avec le N° du Bp type 01 02 03 04

6

log du redémarrage du plug-in

[2021-03-13 10:07:15][INFO] : Start rfxcomd
[2021-03-13 10:07:15][INFO] : Log level : debug
[2021-03-13 10:07:15][INFO] : Socket port : 55000
[2021-03-13 10:07:15][INFO] : Socket host : 127.0.0.1
[2021-03-13 10:07:15][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2021-03-13 10:07:15][INFO] : Device : /dev/ttyUSB0
[2021-03-13 10:07:15][INFO] : Apikey : e9tuqA2G7MEd0WE310BI3IcULmblZVUU
[2021-03-13 10:07:15][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2021-03-13 10:07:15][INFO] : Cycle : 0.3
[2021-03-13 10:07:15][INFO] : Serial rate : 38400
[2021-03-13 10:07:15][INFO] : Serial timeout : 9
[2021-03-13 10:07:15][INFO] : Protocol : 4,6,12,13,18,20,21,22,23
[2021-03-13 10:07:15][INFO] : Find device : /dev/ttyUSB0
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x02 : Receiver/Transmitter Message
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x1C : Edisio
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2021-03-13 10:07:15][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2021-03-13 10:07:15][DEBUG] : Writing PID 14894 to /tmp/jeedom/rfxcom/deamon.pid
[2021-03-13 10:07:15][DEBUG] : Init request module v2.21.0
[2021-03-13 10:07:15][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:15][DEBUG] : null
[2021-03-13 10:07:15][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:15][DEBUG] : Init serial module v3.5
[2021-03-13 10:07:15][DEBUG] : Start listening...
[2021-03-13 10:07:15][DEBUG] : Socket interface started
[2021-03-13 10:07:15][DEBUG] : LoopNetServer Thread started
[2021-03-13 10:07:15][DEBUG] : Open serial port on device: /dev/ttyUSB0, rate 38400, timeout : 9
[2021-03-13 10:07:15][DEBUG] : Listening on: [127.0.0.1:55000]
[2021-03-13 10:07:15][DEBUG] : Open Serialport
[2021-03-13 10:07:15][DEBUG] : flushOutput serial port
[2021-03-13 10:07:15][DEBUG] : flushInput serial port
[2021-03-13 10:07:15][DEBUG] : flushOutput serial port
[2021-03-13 10:07:15][DEBUG] : flushInput serial port
[2021-03-13 10:07:15][DEBUG] : Read Socket Thread Launched
[2021-03-13 10:07:15][DEBUG] : Read Device Thread Launched
[2021-03-13 10:07:16][DEBUG] : Send rfxcomd_reset
[2021-03-13 10:07:16][DEBUG] : Write data to serial port : 0d00000000000000000000000000
[2021-03-13 10:07:16][DEBUG] : Sleep 1 sec
[2021-03-13 10:07:17][DEBUG] : flushInput serial port
[2021-03-13 10:07:17][DEBUG] : Send get status test
[2021-03-13 10:07:17][DEBUG] : Write data to serial port : 0d00000102000000000000000000
[2021-03-13 10:07:17][DEBUG] : Message: 1401000102532b0a0c2f0003001c105e4658434f4d
[2021-03-13 10:07:17][DEBUG] : Decode : 1401000102532b0a0c2f0003001c105e4658434f4d
[2021-03-13 10:07:17][DEBUG] : Test message: 1401000102532b0a0c2f0003001c105e4658434f4d
[2021-03-13 10:07:17][DEBUG] : PacketType: 0x01
[2021-03-13 10:07:17][DEBUG] : Length: 21
[2021-03-13 10:07:17][DEBUG] : Start decoding packet type 0x01
[2021-03-13 10:07:17][DEBUG] : Data : {'packetlen': '0x14', 'packettype': '0x01', 'subtype': '0x00', 'seqnbr': '0x01', 'cmnd': '0x02', 'msg1': '0x53', 'msg2': '0x2B', 'msg3': '0x0A', 'msg4': '0x0C', 'msg5': '0x2F', 'msg6': '0x00', 'msg7': '0x03', 'msg8': '0x00', 'msg9': 28, 'msg10': '0x10', 'msg11': '0x5E', 'msg12': '0x46', 'msg13': '0x58', 'msg14': '0x43', 'msg15': '0x4F', 'msg16': '0x4D'}
[2021-03-13 10:07:17][DEBUG] : Subtype = response on a mode command
[2021-03-13 10:07:17][DEBUG] : Firmware version = 0x2B
[2021-03-13 10:07:17][DEBUG] : RFXtrx433 operating at 433.92MHz
[2021-03-13 10:07:17][DEBUG] : Hardware major version = 0x03
[2021-03-13 10:07:17][DEBUG] : Hardware minor version = 0x00
[2021-03-13 10:07:17][DEBUG] : Output power = 10 dBm
[2021-03-13 10:07:17][DEBUG] : Firmware ProXL1
[2021-03-13 10:07:17][DEBUG] : Noise level (only used in special firmware) = 0x5E
[2021-03-13 10:07:17][DEBUG] : undec on : 0
[2021-03-13 10:07:17][DEBUG] : Imagintronix,Opus/Alecto2010/Alecto : 0
[2021-03-13 10:07:17][DEBUG] : Byron SX,SelectPlus/Alecto5500 : 0
[2021-03-13 10:07:17][DEBUG] : RSL,Revolt/La Crosse : 0
[2021-03-13 10:07:17][DEBUG] : Lighting4/Davis EU : 1
[2021-03-13 10:07:17][DEBUG] : FineOffset,Viking/Davis US : 0
[2021-03-13 10:07:17][DEBUG] : Rubicson,Alecto,Banggood/Davis AU : 1
[2021-03-13 10:07:17][DEBUG] : AE Blyss : 0
[2021-03-13 10:07:17][DEBUG] : BlindsTx : 0
[2021-03-13 10:07:17][DEBUG] : BlindsT0 : 0
[2021-03-13 10:07:17][DEBUG] : Proguard : 0
[2021-03-13 10:07:17][DEBUG] : Legrand CAD : 0
[2021-03-13 10:07:17][DEBUG] : La Crosse : 1
[2021-03-13 10:07:17][DEBUG] : Hideki,TFA,Cresta,UPM/FS20 : 1
[2021-03-13 10:07:17][DEBUG] : AD LightwaveRF : 0
[2021-03-13 10:07:17][DEBUG] : Mertik/Edisio : 0
[2021-03-13 10:07:17][DEBUG] : Visonic : 0
[2021-03-13 10:07:17][DEBUG] : ATI/cartelectronic/Meiantech,Atlantic : 0
[2021-03-13 10:07:17][DEBUG] : Oregon Scientific/Keeloq : 1
[2021-03-13 10:07:17][DEBUG] : Meiantech,Atlantic/Proguard : 0
[2021-03-13 10:07:17][DEBUG] : HomeEasy EU : 1
[2021-03-13 10:07:17][DEBUG] : AC : 1
[2021-03-13 10:07:17][DEBUG] : ARC : 1
[2021-03-13 10:07:17][DEBUG] : X10 : 1
[2021-03-13 10:07:17][DEBUG] : FunkBus 433.42/Itho CVE RFT : 0
[2021-03-13 10:07:17][DEBUG] : MCZ 434.50/Itho CVE ECO RFT : 0
[2021-03-13 10:07:17][DEBUG] : Honeywell Chime : 0
[2021-03-13 10:07:17][DEBUG] : HomeConfort,Fan : 0
[2021-03-13 10:07:17][DEBUG] : Keeloq : 0
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49685]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"154060"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49685]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49686]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"1C8060"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49686]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49687]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EE053A"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49687]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49688]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"271EAFEE"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49688]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49689]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"0143B166"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49689]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49690]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"E93060"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49690]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49691]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"ED8060"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49691]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49692]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDF9BA"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49692]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49693]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDE79E"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49693]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49694]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDDB76"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49694]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49695]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"A501"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49695]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49696]
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDF3C2"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49696]
[2021-03-13 10:07:17][DEBUG] : Client connected to [127.0.0.1:49697]
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': '154060'}
[2021-03-13 10:07:17][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDF0B6"}}'
[2021-03-13 10:07:17][DEBUG] : Client disconnected from [127.0.0.1:49697]
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': '1C8060'}
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': '01EE053A'}
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': '271EAFEE'}
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': '0143B166'}
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': 'E93060'}
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': 'ED8060'}
[2021-03-13 10:07:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:17][DEBUG] : Add device : {'id': '01EDF9BA'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '01EDE79E'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '01EDDB76'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': 'A501'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '01EDF3C2'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '01EDF0B6'}
[2021-03-13 10:07:18][DEBUG] : msg3: [0, 0, 0, 0, 1, 0, 1, 0] / 0a
[2021-03-13 10:07:18][DEBUG] : msg4: [0, 0, 0, 0, 1, 1, 0, 0] / 0c
[2021-03-13 10:07:18][DEBUG] : msg5: [0, 0, 1, 0, 1, 1, 1, 1] / 2f
[2021-03-13 10:07:18][DEBUG] : msg6: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2021-03-13 10:07:18][DEBUG] : Command: 0d00000203531C0a0c2f00000000
[2021-03-13 10:07:18][DEBUG] : Protocol actually activated 0a0c2f00
[2021-03-13 10:07:18][DEBUG] : Actual Frequency 53
[2021-03-13 10:07:18][DEBUG] : Wanted protocol 0a0c2f00
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49698]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01D1205E"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49698]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49699]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01994776"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49699]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49700]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01454362"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49700]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49701]
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"0114C70E"}}'
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '01D1205E'}
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49701]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49702]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"0103DC3A"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49702]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49703]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"F12060"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49703]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49704]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"0C02"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49704]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49705]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"611EF1"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49705]
[2021-03-13 10:07:18][DEBUG] : Client connected to [127.0.0.1:49706]
[2021-03-13 10:07:18][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"0300"}}'
[2021-03-13 10:07:18][DEBUG] : Client disconnected from [127.0.0.1:49706]
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '01994776'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '01454362'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '0114C70E'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '0103DC3A'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': 'F12060'}
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '0C02'}
[2021-03-13 10:07:18][DEBUG] : Message: 09130000ed8060015f60
[2021-03-13 10:07:18][DEBUG] : Decode : 09130000ed8060015f60
[2021-03-13 10:07:18][DEBUG] : Test message: 09130000ed8060015f60
[2021-03-13 10:07:18][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:18][DEBUG] : Length: 10
[2021-03-13 10:07:18][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:18][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:18][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x00', 'cmd1': '0xED', 'cmd2': '0x80', 'cmd3': '0x60', 'pulse': 351, 'filler': 0, 'rssi': 6}
7 
[2021-03-13 10:07:18][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1404, 'rssi': 6}
[2021-03-13 10:07:18][DEBUG] : Device is known id : ED8060
[2021-03-13 10:07:18][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:18][DEBUG] : Add device : {'id': '611EF1'}
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': '0300'}
[2021-03-13 10:07:19][DEBUG] : Send to jeedom : {'devices': {'ED806013': {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1404, 'rssi': 6}}}
[2021-03-13 10:07:19][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:19][DEBUG] : {"devices":{"ED806013":{"packettype":"0x13","subtype":"0x00","id":"ED8060","pulse":1404,"rssi":6}}}
[2021-03-13 10:07:19][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49707]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"D301"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49707]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49709]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"41BE5E30"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49709]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49710]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"013763E6"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49710]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49711]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"41"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49711]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49712]
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': 'D301'}
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"3CF8EF72"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49712]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49713]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"764A821B"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49713]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49714]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"0F1206"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49714]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49715]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDD6FA"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49715]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49716]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDED7E"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49716]
[2021-03-13 10:07:19][DEBUG] : Client connected to [127.0.0.1:49717]
[2021-03-13 10:07:19][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"01EDD6A6"}}'
[2021-03-13 10:07:19][DEBUG] : Client disconnected from [127.0.0.1:49717]
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': '41BE5E30'}
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': '013763E6'}
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': '41'}
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': '3CF8EF72'}
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': '764A821B'}
[2021-03-13 10:07:19][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:19][DEBUG] : Add device : {'id': '0F1206'}
[2021-03-13 10:07:20][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:20][DEBUG] : Add device : {'id': '01EDD6FA'}
[2021-03-13 10:07:20][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:20][DEBUG] : Add device : {'id': '01EDED7E'}
[2021-03-13 10:07:20][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 10:07:20][DEBUG] : Add device : {'id': '01EDD6A6'}
[2021-03-13 10:07:20][DEBUG] : Client connected to [127.0.0.1:49718]
[2021-03-13 10:07:20][DEBUG] : Message read from socket: b'{"apikey":"e9tuqA2G7MEd0WE310BI3IcULmblZVUU","cmd":"add","device":{"id":"B501"}}'
[2021-03-13 10:07:20][DEBUG] : Client disconnected from [127.0.0.1:49718]
[2021-03-13 10:07:20][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-03-13 11:07:20][INFO] : Démon RFXcom lancé
[2021-03-13 10:07:20][DEBUG] : Add device : {'id': 'B501'}
[2021-03-13 10:07:21][DEBUG] : Message: 091300011c8060015950
[2021-03-13 10:07:21][DEBUG] : Decode : 091300011c8060015950
[2021-03-13 10:07:21][DEBUG] : Test message: 091300011c8060015950
[2021-03-13 10:07:21][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:21][DEBUG] : Length: 10
[2021-03-13 10:07:21][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:21][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:21][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x01', 'cmd1': '0x1C', 'cmd2': '0x80', 'cmd3': '0x60', 'pulse': 345, 'filler': 0, 'rssi': 5}
[2021-03-13 10:07:21][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': '1C8060', 'pulse': 1380, 'rssi': 5}
[2021-03-13 10:07:21][DEBUG] : Device is known id : 1C8060
[2021-03-13 10:07:21][DEBUG] : Message: 09130002f12060015c50
[2021-03-13 10:07:21][DEBUG] : Decode : 09130002f12060015c50
[2021-03-13 10:07:21][DEBUG] : Test message: 09130002f12060015c50
[2021-03-13 10:07:21][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:21][DEBUG] : Length: 10
[2021-03-13 10:07:21][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:21][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:21][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x02', 'cmd1': '0xF1', 'cmd2': '0x20', 'cmd3': '0x60', 'pulse': 348, 'filler': 0, 'rssi': 5}
[2021-03-13 10:07:21][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'F12060', 'pulse': 1392, 'rssi': 5}
[2021-03-13 10:07:21][DEBUG] : Device is known id : F12060
[2021-03-13 10:07:21][DEBUG] : Send to jeedom : {'devices': {'1C806013': {'packettype': '0x13', 'subtype': '0x00', 'id': '1C8060', 'pulse': 1380, 'rssi': 5}, 'F1206013': {'packettype': '0x13', 'subtype': '0x00', 'id': 'F12060', 'pulse': 1392, 'rssi': 5}}}
[2021-03-13 10:07:21][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:21][DEBUG] : {"devices":{"1C806013":{"packettype":"0x13","subtype":"0x00","id":"1C8060","pulse":1380,"rssi":5},"F1206013":{"packettype":"0x13","subtype":"0x00","id":"F12060","pulse":1392,"rssi":5}}}
[2021-03-13 10:07:21][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:22][DEBUG] : Message: 085005030300003a69
[2021-03-13 10:07:22][DEBUG] : Decode : 085005030300003a69
[2021-03-13 10:07:22][DEBUG] : Test message: 085005030300003a69
[2021-03-13 10:07:22][DEBUG] : PacketType: 0x50
[2021-03-13 10:07:22][DEBUG] : Length: 9
[2021-03-13 10:07:22][DEBUG] : Start decoding packet type 0x50
[2021-03-13 10:07:22][DEBUG] : Subtype = TEMP5 is La Crosse TX2, TX3, TX4, TX17
[2021-03-13 10:07:22][DEBUG] : Data : {'packetlen': '0x08', 'packettype': '0x50', 'subtype': '0x05', 'seqnbr': '0x03', 'id1': '0x03', 'id2': '0x00', 'temperaturesign': '', 'temperature': 58, 'battery': 100, 'rssi': 6}
[2021-03-13 10:07:22][DEBUG] : Decoded info : {'packettype': '0x50', 'subtype': '0x05', 'id': '0300', 'temperature': '5.8', 'battery': 100, 'rssi': 6}
[2021-03-13 10:07:22][DEBUG] : Device is known id : 0300
[2021-03-13 10:07:23][DEBUG] : Send to jeedom : {'devices': {'030050': {'packettype': '0x50', 'subtype': '0x05', 'id': '0300', 'temperature': '5.8', 'battery': 100, 'rssi': 6}}}
[2021-03-13 10:07:23][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:23][DEBUG] : {"devices":{"030050":{"packettype":"0x50","subtype":"0x05","id":"0300","temperature":"5.8","battery":100,"rssi":6}}}
[2021-03-13 10:07:23][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:25][DEBUG] : Message: 09130004154060016160
[2021-03-13 10:07:25][DEBUG] : Decode : 09130004154060016160
[2021-03-13 10:07:25][DEBUG] : Test message: 09130004154060016160
[2021-03-13 10:07:25][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:25][DEBUG] : Length: 10
[2021-03-13 10:07:25][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:25][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:25][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x04', 'cmd1': '0x15', 'cmd2': '0x40', 'cmd3': '0x60', 'pulse': 353, 'filler': 0, 'rssi': 6}
[2021-03-13 10:07:25][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': '154060', 'pulse': 1412, 'rssi': 6}
[2021-03-13 10:07:25][DEBUG] : Device is known id : 154060
[2021-03-13 10:07:25][DEBUG] : Send to jeedom : {'devices': {'15406013': {'packettype': '0x13', 'subtype': '0x00', 'id': '154060', 'pulse': 1412, 'rssi': 6}}}
[2021-03-13 10:07:25][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:25][DEBUG] : {"devices":{"15406013":{"packettype":"0x13","subtype":"0x00","id":"154060","pulse":1412,"rssi":6}}}
[2021-03-13 10:07:25][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:29][DEBUG] : Message: 09130005ed8060015b60
[2021-03-13 10:07:29][DEBUG] : Decode : 09130005ed8060015b60
[2021-03-13 10:07:29][DEBUG] : Test message: 09130005ed8060015b60
[2021-03-13 10:07:29][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:29][DEBUG] : Length: 10
[2021-03-13 10:07:29][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:29][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:29][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x05', 'cmd1': '0xED', 'cmd2': '0x80', 'cmd3': '0x60', 'pulse': 347, 'filler': 0, 'rssi': 6}
[2021-03-13 10:07:29][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1388, 'rssi': 6}
[2021-03-13 10:07:29][DEBUG] : Device is known id : ED8060
[2021-03-13 10:07:29][DEBUG] : Send to jeedom : {'devices': {'ED806013': {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1388, 'rssi': 6}}}
[2021-03-13 10:07:29][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:29][DEBUG] : {"devices":{"ED806013":{"packettype":"0x13","subtype":"0x00","id":"ED8060","pulse":1388,"rssi":6}}}
[2021-03-13 10:07:29][DEBUG] : Message: 09130006eda060015a60
[2021-03-13 10:07:29][DEBUG] : Decode : 09130006eda060015a60
[2021-03-13 10:07:29][DEBUG] : Test message: 09130006eda060015a60
[2021-03-13 10:07:29][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:29][DEBUG] : Length: 10
[2021-03-13 10:07:29][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:29][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:29][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x06', 'cmd1': '0xED', 'cmd2': '0xA0', 'cmd3': '0x60', 'pulse': 346, 'filler': 0, 'rssi': 6}
[2021-03-13 10:07:29][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'EDA060', 'pulse': 1384, 'rssi': 6}
[2021-03-13 10:07:29][DEBUG] : unknown device id : EDA060
[2021-03-13 10:07:29][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:29][DEBUG] : Message: 09130007ed8060016160
[2021-03-13 10:07:29][DEBUG] : Decode : 09130007ed8060016160
[2021-03-13 10:07:29][DEBUG] : Test message: 09130007ed8060016160
[2021-03-13 10:07:29][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:29][DEBUG] : Length: 10
[2021-03-13 10:07:29][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:29][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:29][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x07', 'cmd1': '0xED', 'cmd2': '0x80', 'cmd3': '0x60', 'pulse': 353, 'filler': 0, 'rssi': 6}
[2021-03-13 10:07:29][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1412, 'rssi': 6}
[2021-03-13 10:07:29][DEBUG] : Device is known id : ED8060
[2021-03-13 10:07:29][DEBUG] : Send to jeedom : {'devices': {'ED806013': {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1412, 'rssi': 6}}}
[2021-03-13 10:07:29][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:29][DEBUG] : {"devices":{"ED806013":{"packettype":"0x13","subtype":"0x00","id":"ED8060","pulse":1412,"rssi":6}}}
[2021-03-13 10:07:29][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:30][DEBUG] : Message: 0a520d08d30100b8310169
[2021-03-13 10:07:30][DEBUG] : Decode : 0a520d08d30100b8310169
[2021-03-13 10:07:30][DEBUG] : Test message: 0a520d08d30100b8310169
[2021-03-13 10:07:30][DEBUG] : PacketType: 0x52
[2021-03-13 10:07:30][DEBUG] : Length: 11
[2021-03-13 10:07:30][DEBUG] : Start decoding packet type 0x52
[2021-03-13 10:07:30][DEBUG] : Subtype = TH13 is Alecto WS1700 and compatibles
[2021-03-13 10:07:30][DEBUG] : Data : {'packetlen': '0x0A', 'packettype': '0x52', 'subtype': '0x0D', 'seqnbr': '0x08', 'id1': '0xD3', 'id2': '0x01', 'temperaturesign': '', 'temperature': 184, 'humidity': 49, 'humidity_status': 1, 'battery': 100, 'rssi': 6}
[2021-03-13 10:07:30][DEBUG] : Decoded info : {'packettype': '0x52', 'subtype': '0x0D', 'id': 'D301', 'temperature': '18.4', 'humidity': 49, 'humidity_status': 1, 'battery': 100, 'rssi': 6}
[2021-03-13 10:07:30][DEBUG] : Device is known id : D301
[2021-03-13 10:07:30][DEBUG] : Send to jeedom : {'devices': {'D30152': {'packettype': '0x52', 'subtype': '0x0D', 'id': 'D301', 'temperature': '18.4', 'humidity': 49, 'humidity_status': 1, 'battery': 100, 'rssi': 6}}}
[2021-03-13 10:07:30][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:30][DEBUG] : {"devices":{"D30152":{"packettype":"0x52","subtype":"0x0D","id":"D301","temperature":"18.4","humidity":49,"humidity_status":1,"battery":100,"rssi":6}}}
[2021-03-13 10:07:30][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:07:31][DEBUG] : Message: 091300091c8060015b50
[2021-03-13 10:07:31][DEBUG] : Decode : 091300091c8060015b50
[2021-03-13 10:07:31][DEBUG] : Test message: 091300091c8060015b50
[2021-03-13 10:07:31][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:31][DEBUG] : Length: 10
[2021-03-13 10:07:31][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:31][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:31][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x09', 'cmd1': '0x1C', 'cmd2': '0x80', 'cmd3': '0x60', 'pulse': 347, 'filler': 0, 'rssi': 5}
[2021-03-13 10:07:31][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': '1C8060', 'pulse': 1388, 'rssi': 5}
[2021-03-13 10:07:31][DEBUG] : Device is known id : 1C8060
[2021-03-13 10:07:32][DEBUG] : Message: 0913000af12060015c50
[2021-03-13 10:07:32][DEBUG] : Decode : 0913000af12060015c50
[2021-03-13 10:07:32][DEBUG] : Test message: 0913000af12060015c50
[2021-03-13 10:07:32][DEBUG] : PacketType: 0x13
[2021-03-13 10:07:32][DEBUG] : Length: 10
[2021-03-13 10:07:32][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:07:32][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:07:32][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x0A', 'cmd1': '0xF1', 'cmd2': '0x20', 'cmd3': '0x60', 'pulse': 348, 'filler': 0, 'rssi': 5}
[2021-03-13 10:07:32][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'F12060', 'pulse': 1392, 'rssi': 5}
[2021-03-13 10:07:32][DEBUG] : Device is known id : F12060
[2021-03-13 10:07:32][DEBUG] : Send to jeedom : {'devices': {'1C806013': {'packettype': '0x13', 'subtype': '0x00', 'id': '1C8060', 'pulse': 1388, 'rssi': 5}, 'F1206013': {'packettype': '0x13', 'subtype': '0x00', 'id': 'F12060', 'pulse': 1392, 'rssi': 5}}}
[2021-03-13 10:07:32][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:07:32][DEBUG] : {"devices":{"1C806013":{"packettype":"0x13","subtype":"0x00","id":"1C8060","pulse":1388,"rssi":5},"F1206013":{"packettype":"0x13","subtype":"0x00","id":"F12060","pulse":1392,"rssi":5}}}
[2021-03-13 10:07:32][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
8

Mets dans les balises aussi log du redémarrage du plug-in

9

voici le log lorsque je pousse sur le premier bouton ON pendant 3 sec:

[2021-03-13 10:16:18][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1396, 'rssi': 5}
[2021-03-13 10:16:18][DEBUG] : Device is known id : ED8060
[2021-03-13 10:16:18][DEBUG] : Send to jeedom : {'devices': {'ED806013': {'packettype': '0x13', 'subtype': '0x00', 'id': 'ED8060', 'pulse': 1396, 'rssi': 5}}}
[2021-03-13 10:16:18][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:16:18][DEBUG] : {"devices":{"ED806013":{"packettype":"0x13","subtype":"0x00","id":"ED8060","pulse":1396,"rssi":5}}}
[2021-03-13 10:16:18][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:16:21][DEBUG] : Message: 0710011d41010160
[2021-03-13 10:16:21][DEBUG] : Decode : 0710011d41010160
[2021-03-13 10:16:21][DEBUG] : Test message: 0710011d41010160
[2021-03-13 10:16:21][DEBUG] : PacketType: 0x10
[2021-03-13 10:16:21][DEBUG] : Length: 8
[2021-03-13 10:16:21][DEBUG] : Start decoding packet type 0x10
[2021-03-13 10:16:21][DEBUG] : Subtype = ARC
[2021-03-13 10:16:21][DEBUG] : Data : {'packetlen': '0x07', 'packettype': '0x10', 'subtype': '0x01', 'seqnbr': '0x1D', 'housecode': '0x41', 'unitcode': 1, 'cmnd': 1, 'filler': 0, 'rssi': 6}
[2021-03-13 10:16:21][DEBUG] : Decoded info : {'packettype': '0x10', 'subtype': '0x01', 'id': '41', 'unitcode': 1, 'cmnd': 1, 'rssi': 6}
[2021-03-13 10:16:21][DEBUG] : Device is known id : 41
[2021-03-13 10:16:21][DEBUG] : Send to jeedom : {'devices': {'4110': {'packettype': '0x10', 'subtype': '0x01', 'id': '41', 'unitcode': 1, 'cmnd': 1, 'rssi': 6}}}
[2021-03-13 10:16:21][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:16:21][DEBUG] : {"devices":{"4110":{"packettype":"0x10","subtype":"0x01","id":"41","unitcode":1,"cmnd":1,"rssi":6}}}
[2021-03-13 10:16:21][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
[2021-03-13 10:16:23][DEBUG] : Message: 0913001ef12060015d70
[2021-03-13 10:16:23][DEBUG] : Decode : 0913001ef12060015d70
[2021-03-13 10:16:23][DEBUG] : Test message: 0913001ef12060015d70
[2021-03-13 10:16:23][DEBUG] : PacketType: 0x13
[2021-03-13 10:16:23][DEBUG] : Length: 10
[2021-03-13 10:16:23][DEBUG] : Start decoding packet type 0x13
[2021-03-13 10:16:23][DEBUG] : Subtype = PT2262, EV1527 433.92MHz
[2021-03-13 10:16:23][DEBUG] : Data : {'packetlen': '0x09', 'packettype': '0x13', 'subtype': '0x00', 'seqnbr': '0x1E', 'cmd1': '0xF1', 'cmd2': '0x20', 'cmd3': '0x60', 'pulse': 349, 'filler': 0, 'rssi': 7}
[2021-03-13 10:16:23][DEBUG] : Decoded info : {'packettype': '0x13', 'subtype': '0x00', 'id': 'F12060', 'pulse': 1396, 'rssi': 7}
[2021-03-13 10:16:23][DEBUG] : Device is known id : F12060
[2021-03-13 10:16:23][DEBUG] : Send to jeedom : {'devices': {'F1206013': {'packettype': '0x13', 'subtype': '0x00', 'id': 'F12060', 'pulse': 1396, 'rssi': 7}}}
[2021-03-13 10:16:23][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-03-13 11:16:23][DEBUG] : {"devices":{"F1206013":{"packettype":"0x13","subtype":"0x00","id":"F12060","pulse":1396,"rssi":7}}}
[2021-03-13 10:16:23][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=e9tuqA2G7MEd0WE310BI3IcULmblZVUU HTTP/1.1" 200 0
10

Ok tu as appuyer sur le Bp 1 ?

L’état devrait déjà être dans l’onglet commande, si tu as bien ID =41 sur l’onglet Equipement :

image
image1913×369 33.9 KB

RECTIFICATION Subtype 01

1 « J'aime »
11

Super, cela fonctionne,

image
image875×204 14.7 KB

tu m’as encore bien aidé @Doubledom, encore un grand merci…

:+1: :smile: :+1: :ok_hand:

après près d’un an de découverte sur Jeedom, c’était une des deux dernières télécommandes qui me résistait …

j’ai vais créer un autre sujet pour la toute dernière qui me semble compliquée (contrôle d’une VMC…)

12

Ok,
tu peux mettre à jour tes infos bt1 et autres bt2 3 4 par les cde respectives des Bp , pour avoir le pseudo retour lors de cde depuis Jeedom

image
image1913×854 81.3 KB

PS: les commandes pour les Bp …

Tu peux mettre x Bp avec le N° du groupe qui va bien !

13

Pour cela Ok, cela dépend avec quoi tu veux cder et quel type de VMC ( Nb vitesse, et pas d’arrêt)

14

Ce sujet a été automatiquement fermé après 24 heures suivant le dernier commentaire. Aucune réponse n’est permise dorénavant.