Demon ok puis nok sur plugin Zigbee + clé Popp

Jean_Surville · Décembre 23, 2021, 11:15

Bonjour à tous,
j’ai un soucis avec le plugin Zigbee avec une clé Popp que je viens d’acquérir.
Après avoir suivi a la lettre la documentation le démontre se met bien au vert puis repasse en rouge quelques secondes après.
j’utilise un RPI 4B 4Go buster 10 armv71
Jeedom V4 stable version 4.1.28
firmware de la clé Popp mis à jour directement via le plugin en version 6.9.1 non officiel mais recommandé et j’ai également testé en 6.7 officiel.
j’ai essayé la connexion de la clé en usb direct et sur rallonge usb.

voici la capture dans santé

et voici les logs dépendance

 /var/www/html/plugins/zigbee/resources/zigbeed/quirks
[2021-12-23 22:40:07][DEBUG] : Loading custom quirks module OTH3600-GA-ZB
[2021-12-23 22:40:07][DEBUG] : Loading custom quirks module schneider
[2021-12-23 22:40:07][DEBUG] : Loading custom quirks module ts130f-curtain
[2021-12-23 22:40:07][DEBUG] : Loading custom quirks module tuya-CO
[2021-12-23 22:40:07][DEBUG] : Loading custom quirks module zgv1
[2021-12-23 22:40:07][INFO] : [start_zigbee] Init zigbee network with config : {'database_path': '/var/www/html/plugins/zigbee/data/1/network_ezsp.db', 'device': {'path': '/dev/ttyUSB0', 'baudrate': 115200}, 'network': {'channel': 15}, 'ezsp': {'CONFIG_APS_UNICAST_MESSAGE_COUNT': 12, 'CONFIG_SOURCE_ROUTE_TABLE_SIZE': 16, 'CONFIG_ADDRESS_TABLE_SIZE': 8}}
[2021-12-23 22:40:07][DEBUG] : executing <function connect.<locals>.connector at 0xb3c861e0>
[2021-12-23 22:40:07][DEBUG] : operation <function connect.<locals>.connector at 0xb3c861e0> completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'PRAGMA integrity_check', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'PRAGMA integrity_check', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchall of sqlite3.Cursor object at 0xb50db4a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchall of sqlite3.Cursor object at 0xb50db4a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'PRAGMA foreign_keys = ON', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'PRAGMA foreign_keys = ON', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'PRAGMA user_version', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'PRAGMA user_version', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchone of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchone of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : Current database version is v7
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'BEGIN TRANSACTION', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'BEGIN TRANSACTION', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'COMMIT', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'COMMIT', []) completed
[2021-12-23 22:40:07][DEBUG] : Loading application state
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM devices_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM devices_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db4a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db4a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM node_descriptors_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM node_descriptors_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db4a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db4a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM endpoints_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM endpoints_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db4a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db4a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db4a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM in_clusters_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM in_clusters_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM out_clusters_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM out_clusters_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb44f9760>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb44f9760>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb44f9760>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb44f9760>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM attributes_cache_v7 WHERE attrid=4 OR attrid=5', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM attributes_cache_v7 WHERE attrid=4 OR attrid=5', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM attributes_cache_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM attributes_cache_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM unsupported_attributes_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM unsupported_attributes_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM groups_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM groups_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM group_members_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM group_members_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM relays_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM relays_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM neighbors_v7', [])
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method execute of sqlite3.Connection object at 0xb44f05a0>, 'SELECT * FROM neighbors_v7', []) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method fetchmany of sqlite3.Cursor object at 0xb50db7a0>, 64) completed
[2021-12-23 22:40:07][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>)
[2021-12-23 22:40:07][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Cursor object at 0xb50db7a0>) completed
[2021-12-23 22:40:07][DEBUG] : Using selector: EpollSelector
[2021-12-23 22:40:07][DEBUG] : Resetting EZSP
[2021-12-23 22:40:07][DEBUG] : Resetting ASH
[2021-12-23 22:40:07][DEBUG] : Sending: b'1ac038bc7e'
[2021-12-23 22:40:12][ERROR] : Couldn't start application
[2021-12-23 22:40:12][DEBUG] : executing functools.partial(<built-in method close of sqlite3.Connection object at 0xb44f05a0>)
[2021-12-23 22:40:12][DEBUG] : operation functools.partial(<built-in method close of sqlite3.Connection object at 0xb44f05a0>) completed
[2021-12-23 22:40:12][INFO] : Shutting down ControllerApplication
[2021-12-23 22:40:12][ERROR] : [start_zigbee] Fatal error : 
[2021-12-23 22:40:12][INFO] : Traceback (most recent call last):
  File "/var/www/html/plugins/zigbee/resources/zigbeed/zigbeed.py", line 102, in start_zigbee
    start_radio=True,
  File "/usr/local/lib/python3.7/dist-packages/zigpy/application.py", line 69, in new
    await app.startup(auto_form)
  File "/usr/local/lib/python3.7/dist-packages/bellows/zigbee/application.py", line 132, in startup
    self._ezsp = await bellows.ezsp.EZSP.initialize(self.config)
  File "/usr/local/lib/python3.7/dist-packages/bellows/ezsp/__init__.py", line 83, in initialize
    await ezsp.reset()
  File "/usr/local/lib/python3.7/dist-packages/bellows/ezsp/__init__.py", line 98, in reset
    await self._gw.reset()
  File "/usr/local/lib/python3.7/dist-packages/bellows/uart.py", line 223, in reset
    return await asyncio.wait_for(self._reset_future, timeout=RESET_TIMEOUT)
  File "/usr/lib/python3.7/asyncio/tasks.py", line 423, in wait_for
    raise futures.TimeoutError()
concurrent.futures._base.TimeoutError

[2021-12-23 22:40:12][INFO] : Shutdown
[2021-12-23 22:40:12][INFO] : Removing PID file /tmp/jeedom/zigbee/deamon_1.pid
[2021-12-23 22:40:12][INFO] : Exit 0

Jean_Surville · Décembre 23, 2021, 11:17

les logs firmware

Begin update of /dev/ttyUSB0 with firmware efr32mg13p-v8-6910-115200.gbl
--2021-12-22 23:55:21--  https://github.com/Elelabs/elelabs-zigbee-ezsp-utility/archive/master.zip
Resolving github.com (github.com)... 140.82.121.4
Connecting to github.com (github.com)|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/Elelabs/elelabs-zigbee-ezsp-utility/zip/master [following]
--2021-12-22 23:55:22--  https://codeload.github.com/Elelabs/elelabs-zigbee-ezsp-utility/zip/master
Resolving codeload.github.com (codeload.github.com)... 140.82.121.10
Connecting to codeload.github.com (codeload.github.com)|140.82.121.10|:443... connected.
HTTP request sent, awaiting response... 
200 OK
Length: unspecified [application/zip]
Saving to: '/tmp/elelabs.zip'

     0K .......... .......... .......... .......... .......... 1.67M
    50K .......... .......... .......... .......... .......... 3.15M
   100K .......... .......... .......... .......... .......... 11.9M
   150K .......... .......... .......... .......... .......... 5.87M
   200K .......... .......... .......... .......... .......... 11.4M
   250K .......... .......... .......... .......... .......... 11.8M
   300K .......... .......... .......... .......... .......... 11.4M
   350K .......... .......... .......... .......... .......... 9.56M
   400K .......... .......... .......... .......... .......... 11.6M
   450K .......... .......... .......... .......... .......... 11.8M
   500K .......... .......... .......... .......... .......... 11.1M
   550K .......... .......... .......... .......... .......... 11.8M
   600K .......... .......... .......... .......... .......... 11.7M
   650K .......... .......... .......... .......... .......... 11.7M
   700K .......... .......... .......... .......... .......... 12.1M
   750K .......... .......... .......... .......... .......... 11.3M
   800K .......... .......... .......... .......... .......... 10.9M
   850K .......... .......... .......... .......... .......... 10.5M
   900K .......... ........                                    11.8M=0.1s

2021-12-22 23:55:22 (7.52 MB/s) - '/tmp/elelabs.zip' saved [940311]

Archive:  elelabs.zip
97371fe9029a687979d22212e5a6b88a600e2491
   creating: elelabs-zigbee-ezsp-utility-master/
 extracting: elelabs-zigbee-ezsp-utility-master/.gitignore  
  inflating: elelabs-zigbee-ezsp-utility-master/CHANGELOG.md  
  inflating: elelabs-zigbee-ezsp-utility-master/Elelabs_EzspFwUtility.py  
  inflating: elelabs-zigbee-ezsp-utility-master/LICENSE  
  inflating: elelabs-zigbee-ezsp-utility-master/README.md  
   creating: elelabs-zigbee-ezsp-utility-master/data/
   creating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG13/
  inflating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG13/ELE_MG13_ot_rcp_115200_120_211116.gbl  
  inflating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG13/ELE_MG13_zb_ncp_115200_610_211112.gbl  
  inflating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG13/ELX0X3_MG13_6.0.3_ezsp_v6.gbl  
  inflating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG13/ELX0X3_MG13_6.7.0_ezsp_v8.gbl  
   creating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG21/
  inflating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG21/ELU0143_MG21_ot_rcp_123_211211.gbl  
  inflating: elelabs-zigbee-ezsp-utility-master/data/EFR32MG21/ELU0143_MG21_zb_ncp_6103_211211.gbl  
   creating: elelabs-zigbee-ezsp-utility-master/img/
  inflating: elelabs-zigbee-ezsp-utility-master/img/ele_update_thread.png  
  inflating: elelabs-zigbee-ezsp-utility-master/img/ele_update_zigbee.png  
  inflating: elelabs-zigbee-ezsp-utility-master/img/logo.jpg  
  inflating: elelabs-zigbee-ezsp-utility-master/img/probe_btl.png  
  inflating: elelabs-zigbee-ezsp-utility-master/img/probe_thread.png  
  inflating: elelabs-zigbee-ezsp-utility-master/img/probe_zigbee.png  
  inflating: elelabs-zigbee-ezsp-utility-master/img/restart_btl.png  
  inflating: elelabs-zigbee-ezsp-utility-master/img/restart_nrml.png  
 extracting: elelabs-zigbee-ezsp-utility-master/requirements.txt  
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting pyserial==3.4
  Using cached https://www.piwheels.org/simple/pyserial/pyserial-3.4-py2.py3-none-any.whl (193 kB)
Requirement already satisfied: xmodem==0.4.6 in /usr/local/lib/python3.7/dist-packages (from -r requirements.txt (line 2)) (0.4.6)
Installing collected packages: pyserial
  Attempting uninstall: pyserial
    Found existing installation: pyserial 3.5
    Uninstalling pyserial-3.5:
      Successfully uninstalled pyserial-3.5
Successfully installed pyserial-3.4
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
2021/12/22 23:55:32 Elelabs_EzspFwUtility:   EZSP adapter in bootloader mode detected:
2021/12/22 23:55:32 Elelabs_EzspFwUtility:   Gecko Bootloader v1.A.0
--2021-12-22 23:55:32--  https://github.com/zha-ng/EZSP-Firmware/raw/master/Elelabs-ELU013/efr32mg13p-v8-6910-115200.gbl
Resolving github.com (github.com)... 140.82.121.4
Connecting to github.com (github.com)|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/zha-ng/EZSP-Firmware/master/Elelabs-ELU013/efr32mg13p-v8-6910-115200.gbl [following]
--2021-12-22 23:55:32--  https://raw.githubusercontent.com/zha-ng/EZSP-Firmware/master/Elelabs-ELU013/efr32mg13p-v8-6910-115200.gbl
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.110.133, 185.199.111.133, 185.199.108.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.110.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 223388 (218K) [application/octet-stream]
Saving to: 'efr32mg13p-v8-6910-115200.gbl'

     0K .......... .......... .......... .......... .......... 22% 6.39M 0s
    50K .......... .......... .......... .......... .......... 45% 8.60M 0s
   100K .......... .......... .......... .......... .......... 68% 16.8M 0s
   150K .......... .......... .......... .......... .......... 91% 15.6M 0s
   200K .......... ........                                   100% 22.0M=0.02s

2021-12-22 23:55:32 (10.6 MB/s) - 'efr32mg13p-v8-6910-115200.gbl' saved [223388/223388]
2021/12/22 23:55:38 Elelabs_EzspFwUtility:   EZSP adapter in bootloader mode detected:
2021/12/22 23:55:38 Elelabs_EzspFwUtility:   Gecko Bootloader v1.A.0
2021/12/22 23:55:38 Elelabs_EzspFwUtility:   Allready in bootloader mode. No need to restart
2021/12/22 23:55:39 Elelabs_EzspFwUtility:   Successfully restarted into X-MODEM mode! Starting upload of the new firmware... DO NOT INTERRUPT(!)
send error: expected ACK; got b'\x18' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b'3' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b' ' for block 107
send error: expected ACK; got b'e' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b'e' for block 107
send error: expected ACK; got b'v' for block 107
send error: expected ACK; got b'b' for block 107
send error: expected ACK; got b'' for block 107
send error: expected ACK; got b'f' for block 107
send error: expected ACK; got b'A' for block 107
send error: NAK received 17 times, aborting.
2021/12/22 23:56:30 Elelabs_EzspFwUtility:   Firmware upload failed. Please try a correct firmware image or restart in normal mode.
.....
.....
.....
.....
.....
.....
.....
.....
....
Traceback (most recent call last):
  File "/usr/local/lib/python3.7/dist-packages/serial/serialposix.py", line 501, in read
    'device reports readiness to read but returned no data '
serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "Elelabs_EzspFwUtility.py", line 788, in <module>
    elelabs.restart(args.mode)
  File "Elelabs_EzspFwUtility.py", line 607, in restart
    adapter_status, adapter_name = self.probe()
  File "Elelabs_EzspFwUtility.py", line 535, in probe
    ezsp_status = ezsp.initEzspProtocol()
  File "Elelabs_EzspFwUtility.py", line 288, in initEzspProtocol
    ash_status = self.ash.sendResetFrame()
  File "Elelabs_EzspFwUtility.py", line 180, in sendResetFrame
    status, ash_response, ezsp_response = self.getResponse()
  File "Elelabs_EzspFwUtility.py", line 155, in getResponse
    receivedbyte = self.serial.read()
  File "/usr/local/lib/python3.7/dist-packages/serial/serialposix.py", line 509, in read
    raise SerialException('read failed: {}'.format(e))
serial.serialutil.SerialException: read failed: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
Traceback (most recent call last):
  File "/usr/local/lib/python3.7/dist-packages/serial/serialposix.py", line 501, in read
    'device reports readiness to read but returned no data '
serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "Elelabs_EzspFwUtility.py", line 791, in <module>
    elelabs.probe()
  File "Elelabs_EzspFwUtility.py", line 535, in probe
    ezsp_status = ezsp.initEzspProtocol()
  File "Elelabs_EzspFwUtility.py", line 288, in initEzspProtocol
    ash_status = self.ash.sendResetFrame()
  File "Elelabs_EzspFwUtility.py", line 180, in sendResetFrame
    status, ash_response, ezsp_response = self.getResponse()
  File "Elelabs_EzspFwUtility.py", line 155, in getResponse
    receivedbyte = self.serial.read()
  File "/usr/local/lib/python3.7/dist-packages/serial/serialposix.py", line 509, in read
    raise SerialException('read failed: {}'.format(e))
serial.serialutil.SerialException: read failed: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
End of update successfull

Jean_Surville · Décembre 23, 2021, 11:18

et enfin les logs update

aunch install of zigbee dependancy
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 https://deb.nodesource.com/node_14.x buster InRelease
Reading package lists...
WARNING: Skipping serial as it is not installed.
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

Reading package lists...
Building dependency tree...
Reading state information...
Package 'python3-serial' is not installed, so not removed
The following package was automatically installed and is no longer required:
  rpi-eeprom-images
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python3 is already the newest version (3.7.3-1).
python3-dev is already the newest version (3.7.3-1).
python3-pyudev is already the newest version (0.21.0-1).
python3-requests is already the newest version (2.21.0-1).
python3-setuptools is already the newest version (40.8.0-1).
python3-pip is already the newest version (18.1-5+rpt1).
The following package was automatically installed and is no longer required:
  rpi-eeprom-images
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: wheel in /usr/local/lib/python3.7/dist-packages (0.37.1)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting pyserial
  Using cached https://www.piwheels.org/simple/pyserial/pyserial-3.5-py2.py3-none-any.whl (90 kB)
Installing collected packages: pyserial
Successfully installed pyserial-3.5
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: zigpy in /usr/local/lib/python3.7/dist-packages (0.42.0)
Requirement already satisfied: voluptuous in /usr/local/lib/python3.7/dist-packages (from zigpy) (0.12.1)
Requirement already satisfied: crccheck in /usr/local/lib/python3.7/dist-packages (from zigpy) (1.0)
Requirement already satisfied: aiohttp in /usr/local/lib/python3.7/dist-packages (from zigpy) (3.7.4.post0)
Requirement already satisfied: pycryptodome in /usr/local/lib/python3.7/dist-packages (from zigpy) (3.10.1)
Requirement already satisfied: aiosqlite>=0.16.0 in /usr/local/lib/python3.7/dist-packages (from zigpy) (0.17.0)
Requirement already satisfied: typing_extensions>=3.7.2 in /usr/local/lib/python3.7/dist-packages (from aiosqlite>=0.16.0->zigpy) (3.7.4.3)
Requirement already satisfied: async-timeout<4.0,>=3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy) (3.0.1)
Requirement already satisfied: yarl<2.0,>=1.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy) (1.6.3)
Requirement already satisfied: chardet<5.0,>=2.0 in /usr/lib/python3/dist-packages (from aiohttp->zigpy) (3.0.4)
Requirement already satisfied: multidict<7.0,>=4.5 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy) (5.1.0)
Requirement already satisfied: attrs>=17.3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy) (20.3.0)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp->zigpy) (2.6)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: bellows in /usr/local/lib/python3.7/dist-packages (0.29.0)
Requirement already satisfied: pyserial in /usr/local/lib/python3.7/dist-packages (from bellows) (3.5)
Requirement already satisfied: voluptuous in /usr/local/lib/python3.7/dist-packages (from bellows) (0.12.1)
Requirement already satisfied: click-log>=0.2.1 in /usr/local/lib/python3.7/dist-packages (from bellows) (0.3.2)
Requirement already satisfied: pure-pcapy3==1.0.1 in /usr/local/lib/python3.7/dist-packages (from bellows) (1.0.1)
Requirement already satisfied: zigpy>=0.37.0 in /usr/local/lib/python3.7/dist-packages (from bellows) (0.42.0)
Requirement already satisfied: click in /usr/local/lib/python3.7/dist-packages (from bellows) (7.1.2)
Requirement already satisfied: pyserial-asyncio in /usr/local/lib/python3.7/dist-packages (from bellows) (0.5)
Requirement already satisfied: setuptools in /usr/local/lib/python3.7/dist-packages (from pure-pcapy3==1.0.1->bellows) (45.2.0)
Requirement already satisfied: pycryptodome in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.37.0->bellows) (3.10.1)
Requirement already satisfied: crccheck in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.37.0->bellows) (1.0)
Requirement already satisfied: aiosqlite>=0.16.0 in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.37.0->bellows) (0.17.0)
Requirement already satisfied: aiohttp in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.37.0->bellows) (3.7.4.post0)
Requirement already satisfied: typing_extensions>=3.7.2 in /usr/local/lib/python3.7/dist-packages (from aiosqlite>=0.16.0->zigpy>=0.37.0->bellows) (3.7.4.3)
Requirement already satisfied: chardet<5.0,>=2.0 in /usr/lib/python3/dist-packages (from aiohttp->zigpy>=0.37.0->bellows) (3.0.4)
Requirement already satisfied: attrs>=17.3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.37.0->bellows) (20.3.0)
Requirement already satisfied: yarl<2.0,>=1.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.37.0->bellows) (1.6.3)
Requirement already satisfied: multidict<7.0,>=4.5 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.37.0->bellows) (5.1.0)
Requirement already satisfied: async-timeout<4.0,>=3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.37.0->bellows) (3.0.1)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp->zigpy>=0.37.0->bellows) (2.6)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: zha-quirks in /usr/local/lib/python3.7/dist-packages (0.0.65)
Requirement already satisfied: zigpy>=0.42.0 in /usr/local/lib/python3.7/dist-packages (from zha-quirks) (0.42.0)
Requirement already satisfied: voluptuous in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.42.0->zha-quirks) (0.12.1)
Requirement already satisfied: crccheck in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.42.0->zha-quirks) (1.0)
Requirement already satisfied: aiosqlite>=0.16.0 in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.42.0->zha-quirks) (0.17.0)
Requirement already satisfied: pycryptodome in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.42.0->zha-quirks) (3.10.1)
Requirement already satisfied: aiohttp in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.42.0->zha-quirks) (3.7.4.post0)
Requirement already satisfied: typing_extensions>=3.7.2 in /usr/local/lib/python3.7/dist-packages (from aiosqlite>=0.16.0->zigpy>=0.42.0->zha-quirks) (3.7.4.3)
Requirement already satisfied: async-timeout<4.0,>=3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.42.0->zha-quirks) (3.0.1)
Requirement already satisfied: attrs>=17.3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.42.0->zha-quirks) (20.3.0)
Requirement already satisfied: multidict<7.0,>=4.5 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.42.0->zha-quirks) (5.1.0)
Requirement already satisfied: yarl<2.0,>=1.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.42.0->zha-quirks) (1.6.3)
Requirement already satisfied: chardet<5.0,>=2.0 in /usr/lib/python3/dist-packages (from aiohttp->zigpy>=0.42.0->zha-quirks) (3.0.4)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp->zigpy>=0.42.0->zha-quirks) (2.6)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: zigpy_znp in /usr/local/lib/python3.7/dist-packages (0.6.4)
Requirement already satisfied: pyserial-asyncio in /usr/local/lib/python3.7/dist-packages (from zigpy_znp) (0.5)
Requirement already satisfied: zigpy>=0.40.0 in /usr/local/lib/python3.7/dist-packages (from zigpy_znp) (0.42.0)
Requirement already satisfied: voluptuous in /usr/local/lib/python3.7/dist-packages (from zigpy_znp) (0.12.1)
Requirement already satisfied: coloredlogs in /usr/local/lib/python3.7/dist-packages (from zigpy_znp) (15.0)
Requirement already satisfied: async-timeout in /usr/local/lib/python3.7/dist-packages (from zigpy_znp) (3.0.1)
Requirement already satisfied: jsonschema in /usr/local/lib/python3.7/dist-packages (from zigpy_znp) (3.2.0)
Requirement already satisfied: aiohttp in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy_znp) (3.7.4.post0)
Requirement already satisfied: aiosqlite>=0.16.0 in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy_znp) (0.17.0)
Requirement already satisfied: pycryptodome in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy_znp) (3.10.1)
Requirement already satisfied: crccheck in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy_znp) (1.0)
Requirement already satisfied: typing_extensions>=3.7.2 in /usr/local/lib/python3.7/dist-packages (from aiosqlite>=0.16.0->zigpy>=0.40.0->zigpy_znp) (3.7.4.3)
Requirement already satisfied: chardet<5.0,>=2.0 in /usr/lib/python3/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy_znp) (3.0.4)
Requirement already satisfied: attrs>=17.3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy_znp) (20.3.0)
Requirement already satisfied: multidict<7.0,>=4.5 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy_znp) (5.1.0)
Requirement already satisfied: yarl<2.0,>=1.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy_znp) (1.6.3)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp->zigpy>=0.40.0->zigpy_znp) (2.6)
Requirement already satisfied: humanfriendly>=9.1 in /usr/local/lib/python3.7/dist-packages (from coloredlogs->zigpy_znp) (9.1)
Requirement already satisfied: importlib-metadata in /usr/local/lib/python3.7/dist-packages (from jsonschema->zigpy_znp) (4.0.1)
Requirement already satisfied: six>=1.11.0 in /usr/lib/python3/dist-packages (from jsonschema->zigpy_znp) (1.12.0)
Requirement already satisfied: setuptools in /usr/local/lib/python3.7/dist-packages (from jsonschema->zigpy_znp) (45.2.0)
Requirement already satisfied: pyrsistent>=0.14.0 in /usr/local/lib/python3.7/dist-packages (from jsonschema->zigpy_znp) (0.17.3)
Requirement already satisfied: zipp>=0.5 in /usr/local/lib/python3.7/dist-packages (from importlib-metadata->jsonschema->zigpy_znp) (3.4.1)
Requirement already satisfied: pyserial in /usr/local/lib/python3.7/dist-packages (from pyserial-asyncio->zigpy_znp) (3.5)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: zigpy-xbee in /usr/local/lib/python3.7/dist-packages (0.14.0)
Requirement already satisfied: pyserial-asyncio in /usr/local/lib/python3.7/dist-packages (from zigpy-xbee) (0.5)
Requirement already satisfied: zigpy>=0.23.0 in /usr/local/lib/python3.7/dist-packages (from zigpy-xbee) (0.42.0)
Requirement already satisfied: aiohttp in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.23.0->zigpy-xbee) (3.7.4.post0)
Requirement already satisfied: aiosqlite>=0.16.0 in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.23.0->zigpy-xbee) (0.17.0)
Requirement already satisfied: voluptuous in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.23.0->zigpy-xbee) (0.12.1)
Requirement already satisfied: pycryptodome in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.23.0->zigpy-xbee) (3.10.1)
Requirement already satisfied: crccheck in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.23.0->zigpy-xbee) (1.0)
Requirement already satisfied: typing_extensions>=3.7.2 in /usr/local/lib/python3.7/dist-packages (from aiosqlite>=0.16.0->zigpy>=0.23.0->zigpy-xbee) (3.7.4.3)
Requirement already satisfied: yarl<2.0,>=1.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.23.0->zigpy-xbee) (1.6.3)
Requirement already satisfied: multidict<7.0,>=4.5 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.23.0->zigpy-xbee) (5.1.0)
Requirement already satisfied: chardet<5.0,>=2.0 in /usr/lib/python3/dist-packages (from aiohttp->zigpy>=0.23.0->zigpy-xbee) (3.0.4)
Requirement already satisfied: attrs>=17.3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.23.0->zigpy-xbee) (20.3.0)
Requirement already satisfied: async-timeout<4.0,>=3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.23.0->zigpy-xbee) (3.0.1)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp->zigpy>=0.23.0->zigpy-xbee) (2.6)
Requirement already satisfied: pyserial in /usr/local/lib/python3.7/dist-packages (from pyserial-asyncio->zigpy-xbee) (3.5)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: zigpy-deconz in /usr/local/lib/python3.7/dist-packages (0.14.0)
Requirement already satisfied: pyserial-asyncio in /usr/local/lib/python3.7/dist-packages (from zigpy-deconz) (0.5)
Requirement already satisfied: zigpy>=0.40.0 in /usr/local/lib/python3.7/dist-packages (from zigpy-deconz) (0.42.0)
Requirement already satisfied: pycryptodome in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy-deconz) (3.10.1)
Requirement already satisfied: aiosqlite>=0.16.0 in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy-deconz) (0.17.0)
Requirement already satisfied: crccheck in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy-deconz) (1.0)
Requirement already satisfied: voluptuous in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy-deconz) (0.12.1)
Requirement already satisfied: aiohttp in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.40.0->zigpy-deconz) (3.7.4.post0)
Requirement already satisfied: typing_extensions>=3.7.2 in /usr/local/lib/python3.7/dist-packages (from aiosqlite>=0.16.0->zigpy>=0.40.0->zigpy-deconz) (3.7.4.3)
Requirement already satisfied: chardet<5.0,>=2.0 in /usr/lib/python3/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy-deconz) (3.0.4)
Requirement already satisfied: async-timeout<4.0,>=3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy-deconz) (3.0.1)
Requirement already satisfied: yarl<2.0,>=1.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy-deconz) (1.6.3)
Requirement already satisfied: multidict<7.0,>=4.5 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy-deconz) (5.1.0)
Requirement already satisfied: attrs>=17.3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.40.0->zigpy-deconz) (20.3.0)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp->zigpy>=0.40.0->zigpy-deconz) (2.6)
Requirement already satisfied: pyserial in /usr/local/lib/python3.7/dist-packages (from pyserial-asyncio->zigpy-deconz) (3.5)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: zigpy-zigate in /usr/local/lib/python3.7/dist-packages (0.7.4)
Requirement already satisfied: pyserial-asyncio in /usr/local/lib/python3.7/dist-packages (from zigpy-zigate) (0.5)
Requirement already satisfied: zigpy>=0.22.2 in /usr/local/lib/python3.7/dist-packages (from zigpy-zigate) (0.42.0)
Requirement already satisfied: pyusb in /usr/lib/python3/dist-packages (from zigpy-zigate) (1.0.2)
Requirement already satisfied: RPi.GPIO in /usr/lib/python3/dist-packages (from zigpy-zigate) (0.7.0)
Requirement already satisfied: aiohttp in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.22.2->zigpy-zigate) (3.7.4.post0)
Requirement already satisfied: pycryptodome in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.22.2->zigpy-zigate) (3.10.1)
Requirement already satisfied: aiosqlite>=0.16.0 in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.22.2->zigpy-zigate) (0.17.0)
Requirement already satisfied: voluptuous in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.22.2->zigpy-zigate) (0.12.1)
Requirement already satisfied: crccheck in /usr/local/lib/python3.7/dist-packages (from zigpy>=0.22.2->zigpy-zigate) (1.0)
Requirement already satisfied: typing_extensions>=3.7.2 in /usr/local/lib/python3.7/dist-packages (from aiosqlite>=0.16.0->zigpy>=0.22.2->zigpy-zigate) (3.7.4.3)
Requirement already satisfied: attrs>=17.3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.22.2->zigpy-zigate) (20.3.0)
Requirement already satisfied: yarl<2.0,>=1.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.22.2->zigpy-zigate) (1.6.3)
Requirement already satisfied: chardet<5.0,>=2.0 in /usr/lib/python3/dist-packages (from aiohttp->zigpy>=0.22.2->zigpy-zigate) (3.0.4)
Requirement already satisfied: async-timeout<4.0,>=3.0 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.22.2->zigpy-zigate) (3.0.1)
Requirement already satisfied: multidict<7.0,>=4.5 in /usr/local/lib/python3.7/dist-packages (from aiohttp->zigpy>=0.22.2->zigpy-zigate) (5.1.0)
Requirement already satisfied: idna>=2.0 in /usr/lib/python3/dist-packages (from yarl<2.0,>=1.0->aiohttp->zigpy>=0.22.2->zigpy-zigate) (2.6)
Requirement already satisfied: pyserial in /usr/local/lib/python3.7/dist-packages (from pyserial-asyncio->zigpy-zigate) (3.5)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: tornado in /usr/local/lib/python3.7/dist-packages (6.1)
WARNING: Running pip as root will break packages and permissions. You should install packages reliably by using venv: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 21.1.2; however, version 21.3.1 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
Everything is successfully installed!

concernant les ports j’ai éssayé 8080 8084 8089 8090 et 8091
et voici ma config actuelle

Pour info j’ai également trouvé des sujets similaires dont celui ci mais dont la solution n’est pas applicable à mon cas
https://community.jeedom.com/t/plugin-zigbee-cle-usb-popp-probl-apres-maj-firmware/69082/2

j’espère avoir donné toutes les infos et avoir été précis merci pour votre aide

cddu33 · Décembre 24, 2021, 7:34

Bonjour,
Je ne connais pas spécialement cette clé mais vu le log de ton firmware, je dirais que la mise à jour ne se passe pas bien.
Est-ce que tu as essayé de réinstaller le plugin histoire qu’il re récupéré le firmware puis réessayer de mettre à jour.

Jean_Surville · Décembre 24, 2021, 10:44

Bonjour @cddu33, oui en effet j’ai tenté cette procédure à 2 reprises déjà mais sans résultat malheureusement.

Jean_Surville · Décembre 24, 2021, 4:25

Et pour info j’ai également fait un Sudo update et upgrade sur le rpi pour être au propre.

Jean_Surville · Décembre 26, 2021, 8:49

[Clef Zigbee demon NOK]
J’ai également trouvé ce sujet que @cstan77 et @iPapy ont apparemment tenté de résoudre mais il semblerait que son problème était dû à l’utilisation d’une box odroid c4 ce qui n’est pas mon cas
Si vous trouvez des sujets équivalents n’hésitez pas à m’en faire part peut être que la solution est dans l’un d’eux

Jean_Surville · Décembre 26, 2021, 11:47

C’est bon tout fonctionne j’ai fini par trouver ce post qui a enfin résolu mon problème.
Donc un grand merci à @FBAF qui sans le savoir m’a été d’une grande aide.
Et merci aussi a @cddu33 qui a pris le temps de me répondre.

Voilà c’est cette petite procédure qui m’a aidé j’ai ensuite refait la mise à jour du firmware et refait l’installation du plugin et bingo.

system · Décembre 27, 2021, 11:48

Ce sujet a été automatiquement fermé après 24 heures suivant le dernier commentaire. Aucune réponse n’est permise dorénavant.