Capteurs xiaomi (via deconz) reçu par jeedom mais pas mis à jour (encore...)

Plugins Protocole domotique
1

Bonjour,

Je dois malheureusement revenir sur le problème que j’ai décrit dans Utilisation de capteurs xiaomi via deconz - #20 par sanji, que je pensais résolu mais qui se pose à nouveau…
Explications rapides: mes capteurs xiaomi sont gérés par une clef ConBee II qui fonctionne correctement. Les informations sous Phoscon sont à jour.

Par exemple pour une sonde de température, qui a été remontée à 6:24 pm:

phoscon
phoscon1020×462 33.1 KB

Dans jeedom, je peux suivre l’historique de ce capteur, et on voit que vers 9:30 am, la température cesse d’être mise à jour:

Temp%20spa
Temp%20spa962×606 28.3 KB

Depuis ce moment-là, la température est bloquée sur 37.86°C (elle est de 38.28°C maintenant)

Temp%20spa%209am
Temp%20spa%209am542×530 19.5 KB

Si je teste cette température, j’obtiens toujours cette ancienne valeur de 37.86°C (9:32 am):
Temp%20spa%20controller
Temp%20spa%20controller1887×442 49.7 KB

Pourtant, les données brutes dans Phoscon sont justes (voir ci-dessus), et elles sont également envoyées correctement dans jeedom. En effet, on retrouve dans les données brutes 38.28°C envoyé à 5:24pm.

Temp%20spa%20Brut
Temp%20spa%20Brut501×744 46.1 KB

Déjà testé:

  • Démon et Dépendances relancés (-> ancun changement);
  • Débrancher et rebrancher la clef ConBee II (-> ancun changement);
  • Redémarrage de jeedom (-> ancun changement);
  • Vérifié que le problème touche TOUS les capteurs (thermomètres, portes, …)
  • Vérification des paramètres deconz
    Capture%20deconz
    Capture%20deconz1807×150 14.3 KB
    ;
  • Désactiver les capteurs gérés par deconz sous Xiaomi (si interférence il devait y avoir) (-> ancun changement)

Voici les log (mode debug) lors d’un redémarrage du Démon :

[2020-02-02 18:18:26.192][DEBUG] : Client connected to [127.0.0.1:54496]
[2020-02-02 18:18:26.194][DEBUG] : Message read from socket: b'{"apikey":"6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR","cmd":"addgateway","gateways":[{"id":"00212EFFFF042375","name":"Phoscon","internalipaddress":"127.0.0.1","internalport":"8484","websocketport":"20877","apikey":"3546EA2194","manageTimeZone":"0"}]}'
[2020-02-02 18:18:26.195][DEBUG] : Client disconnected from [127.0.0.1:54496]
[2020-02-02 18:18:26.201][DEBUG] : Signal 15 caught, exiting...
[2020-02-02 18:18:26.202][DEBUG] : Shutdown
[2020-02-02 18:18:26.203][DEBUG] : Removing PID file /tmp/jeedom/deconz/deamon.pid
[2020-02-02 18:18:26.214][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-02-02 18:18:26.216][DEBUG] : Closing All Websockets
[2020-02-02 18:18:26.700][DEBUG] : LoopNetServer Thread stopped
[2020-02-02 18:18:27.000][DEBUG] : Exit 0
[2020-02-02 19:18:35][INFO] : Lancement démon deconz : /usr/bin/python3 /var/www/html/plugins/deconz/resources/deconzd/deconzd.py --loglevel debug --socketport 55088 --callback http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php --apikey 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR --cycle 0 --pid /tmp/jeedom/deconz/deamon.pid
[2020-02-02 18:19:01.378][INFO] : Start deconzd
[2020-02-02 18:19:01.400][INFO] : Log level : debug
[2020-02-02 18:19:01.402][INFO] : Socket port : 55088
[2020-02-02 18:19:01.403][INFO] : Socket host : localhost
[2020-02-02 18:19:01.405][INFO] : PID file : /tmp/jeedom/deconz/deamon.pid
[2020-02-02 18:19:01.406][INFO] : Apikey : 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR
[2020-02-02 18:19:01.407][INFO] : Callback : http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php
[2020-02-02 18:19:01.412][INFO] : Cycle : 0.0
[2020-02-02 18:19:01.413][DEBUG] : Writing PID 19596 to /tmp/jeedom/deconz/deamon.pid
[2020-02-02 18:19:01.415][DEBUG] : Init request module v2.22.0
[2020-02-02 18:19:01.509][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-02-02 18:19:01.566][DEBUG] : http://127.0.0.1:80 "GET /plugins/deconz/core/php/jeeDeconz.php?apikey=6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR HTTP/1.1" 200 0
[2020-02-02 18:19:01.573][DEBUG] : Start listening...
[2020-02-02 18:19:01.575][DEBUG] : Socket interface started
[2020-02-02 18:19:01.600][DEBUG] : LoopNetServer Thread started
[2020-02-02 18:19:01.602][INFO] : Local DeconZ found
[2020-02-02 18:19:01.604][INFO] : Launching local DeconZ
[2020-02-02 18:19:01.608][INFO] : Log level deconz deamon debug
[2020-02-02 18:19:01.616][INFO] : Opt deconz deamon ['sudo', 'deCONZ', '--auto-connect=1', '--dbg-error=1', '--http-port=8484', '--ws-port=20877', '--upnp=0', '-platform', 'minimal', '--dbg-aps=2', '--dbg-info=2', '--dbg-zcl=2', '--dbg-zdp=2', '--dbg-http=2']
[2020-02-02 18:19:01.603][DEBUG] : Listening on: [localhost:55088]
[2020-02-02 18:19:01.661][INFO] : Launched DeconZ with pid 20774
[2020-02-02 18:19:01.663][DEBUG] : Start socket thread
[2020-02-02 18:19:04.546][DEBUG] : Client connected to [127.0.0.1:55024]
[2020-02-02 18:19:04.547][DEBUG] : Message read from socket: b'{"apikey":"6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR","cmd":"addgateway","gateways":[{"id":"00212EFFFF042375","name":"Phoscon","internalipaddress":"127.0.0.1","internalport":"8484","websocketport":"20877","apikey":"3546EA2194","manageTimeZone":"0"}]}'
[2020-02-02 18:19:04.559][DEBUG] : Client disconnected from [127.0.0.1:55024]
[2020-02-02 18:19:04.593][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-02-02 18:19:04.595][DEBUG] : Closing All Websockets
[2020-02-02 18:19:05.599][DEBUG] : Add gateway : Phoscon
[2020-02-02 18:19:05.624][DEBUG] : Starting WebSocket for Phoscon on ip 127.0.0.1 and port 20877
[2020-02-02 19:19:14][DEBUG] : 127.0.0.1:8484/api/3546EA2194/sensors type : POST
[2020-02-02 19:19:14][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2020-02-02T18:19:08","status":220,"sunrise":"2020-02-02T06:58:02","sunset":"2020-02-02T16:38:24"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:04:23:75-01"},"10":{"config":{"battery":91,"on":true,"reachable":true,"temperature":1700},"ep":1,"etag":"47179fcaae0ac392f801f3797e468a7e","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Veranda","state":{"lastupdated":"2020-02-02T17:12:16","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:01:98:51-01-0006"},"11":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2500},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Bathroom","state":{"lastupdated":"2020-02-02T17:11:35","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:b5:fd-01-0006"},"12":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2600},"ep":1,"etag":"47179fcaae0ac392f801f3797e468a7e","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Rikyu","state":{"lastupdated":"2020-02-02T17:49:29","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:09:df-01-0006"},"13":{"config":{"battery":100,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion - Living Room","state":{"lastupdated":"2020-02-02T17:53:55","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:01:9c:b3:94-01-0406"},"14":{"config":{"battery":100,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion Sensor","state":{"lastupdated":"2020-02-02T17:32:22","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:02:23:c6:c2-01-0406"},"15":{"config":{"battery":100,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_magnet","name":"Door - Entrance","state":{"lastupdated":"2020-02-02T17:20:56","open":false},"type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:c1:e8:a3-01-0006"},"16":{"config":{"battery":91,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion Sensor (2)","state":{"lastupdated":"2020-02-02T17:22:11","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:01:dc:2f:cc-01-0406"},"17":{"config":{"battery":78,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"lastupdated":"2020-02-02T17:00:14","temperature":2114},"swversion":"20161129","type":"ZHATemperature","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0402"},"18":{"config":{"battery":78,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"humidity":6006,"lastupdated":"2020-02-02T17:00:14"},"swversion":"20161129","type":"ZHAHumidity","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0405"},"19":{"config":{"battery":78,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"lastupdated":"2020-02-02T17:00:14","pressure":957},"swversion":"20161129","type":"ZHAPressure","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0403"},"20":{"config":{"battery":81,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"lastupdated":"2020-02-02T17:46:47","temperature":1299},"swversion":"20161129","type":"ZHATemperature","uniqueid":"00:15:8d:00:03:49:91:ed-01-0402"},"21":{"config":{"battery":81,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"humidity":7340,"lastupdated":"2020-02-02T17:46:47"},"swversion":"20161129","type":"ZHAHumidity","uniqueid":"00:15:8d:00:03:49:91:ed-01-0405"},"22":{"config":{"battery":81,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"lastupdated":"2020-02-02T17:46:47","pressure":956},"swversion":"20161129","type":"ZHAPressure","uniqueid":"00:15:8d:00:03:49:91:ed-01-0403"},"23":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2500},"ep":1,"etag":"47179fcaae0ac392f801f3797e468a7e","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - NEW","state":{"lastupdated":"2020-02-02T17:41:11","open":true},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:ca:0f:82-01-0006"},"24":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2400},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Living Room","state":{"lastupdated":"2020-02-02T17:51:11","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:01:96:b4-01-0006"},"25":{"config":{"battery":95,"on":true,"reachable":true,"temperature":3200},"ep":1,"etag":"47179fcaae0ac392f801f3797e468a7e","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Office","state":{"lastupdated":"2020-02-02T17:40:52","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:b6:07-01-0006"},"26":{"config":{"battery":100,"on":true,"reachable":false},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","mode":1,"modelid":"lumi.sensor_switch","name":"Switch - Radio","state":{"buttonevent":1004,"lastupdated":"2020-01-27T17:28:27"},"type":"ZHASwitch","uniqueid":"00:15:8d:00:01:e5:c6:e2-01-0006"},"6":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2400},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Parents","state":{"lastupdated":"2020-02-02T17:44:33","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:0b:96-01-0006"},"7":{"config":{"battery":71,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_ht","name":"Temp - spa (T5)","state":{"lastupdated":"2020-02-02T17:24:16","temperature":3828},"swversion":"20161026","type":"ZHATemperature","uniqueid":"00:15:8d:00:01:f5:3d:12-01-0402"},"8":{"config":{"battery":71,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_ht","name":"Temp - spa (T5)","state":{"humidity":9285,"lastupdated":"2020-02-02T17:24:16"},"swversion":"20161026","type":"ZHAHumidity","uniqueid":"00:15:8d:00:01:f5:3d:12-01-0405"},"9":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2500},"ep":1,"etag":"2aaf316aace9a6057921c12fc94b67f9","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Guest","state":{"lastupdated":"2020-02-02T17:09:28","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:04:5c:ce-01-0006"}}
[2020-02-02 19:19:18][DEBUG] : 127.0.0.1:8484/api/3546EA2194/lights type : POST
[2020-02-02 19:19:18][DEBUG] : []

J’espère que @choupfamily63 et @Loic et @Minscof qui étaient sur l’ancien fil verront celui-ci.

Mon alarme et mes sécurités ne fonctionnent pas alors je suis vraiment motivé par trouver une solution! Merci pour vos suggestions.

Le seul autre problème que je vois avec deconz c’est un message d’erreur presque quotidien pour les backups :

2020-02-02 02:00:08 deconz [00212EFFFF042375] Error on backup : Echec de la requête HTTP : 127.0.0.1:8484/api/3546EA2194/config/export cURL error : Operation timed out after 2000 milliseconds with 0 bytes received

sanji

2

Bonjour,

Pour venir de rencontrer le même problème avec la même configuration, mais avec seulement certains de mes capteurs (je n’ai à l’heure actuelle que 20 capteurs humidité/température), j’ai quasiment tout essayé (reboot jeedom, relance deconz, synchro phoscon…), et j’avais le même soucis que @sanji.

Maintenant ce message n’a qu’un but d’apport d’informations : elles sont partielles, sans logs et je ne suis pas sûr qu’elles soient directement exploitable par une équipe de support. Je me permet de raconter ce que j’ai fait et qui semble avoir réglé le problème chez moi.

Point à prendre en considération : j’ai été dans l’obligation de modifier l’IP de mon jeedom en milieu de semaine dernière en raison d’une refonte complète de mon réseau et dans mon intervention, je sais que j’ai débranché de manière brutale et impromptue mon hub USB sur lequel est branché ma conbee2.

A partir de ce moment là, l’ensemble de mes sondes xiaomi ne remontaient plus. J’ai redémarré le démon et il me semblent qu’elles ont raccrochées (impossible de dire si l’ensemble a raccroché ni de quelle manière elles avaient déconnecté, je n’ai pas fait de vérification poussée).

Hier après-midi, j’ai du redémarrer mon PI, et depuis ce redémarrage, j’ai rencontré le même souci que @sanji, à savoir que certaines sondes étaient bien à jour en mode brut mais pas remontées convenablement dans jeedom, alors que d’autres fonctionnaient convenablement. J’ai retenté ce matin un redémarrage du démon sans succès. De là j’ai essayé de bidouiller un peut tout (aaaaah, le plus grand plaisir du nioub !:stuck_out_tongue_winking_eye:)-…

ET la seule chose que j’ai réalisé dans l’écran configuration qui a semblé faire quelque chose est une nouvelle récupération de clef API : bizarrement, elle a changé à ce moment là dans le tableau et il semblerait que tout soit rentré dans l’ordre : mes sondes remontent à nouveau correctement.

Bref pas très sur de comprendre ce qui s’est passé, parce que pour moi une clé API est liée au matériel, qui n’as pas changé dans mon cas, mais bon… c’est pour cela aussi que je vous ai collé cette tartine à lire !

Bonne journée à tous.

Seb

3

Bonjour,
Je ne comprends pas trop ce qu’il se passe (je cherche même si je ne suis pas beaucoup intervenu) mais je tiens juste a corriger : la clef api n’est pas liée au matériel et peu changer (et je soupçonne même que le soucis vient de la, la clef api qui change).

On a fait une demande a deconz pour pouvoir en mettre une en dur lors du démarrage du démon, malheureusement nous n’avons pas de retour pour le moment.

4

Merci à vous pour vos réponses, j’avais noté en effet que la clef API change à chaque fois que l’on la récupère…

J’ai essayé de la récupérer (donc de la changer); puis de relancer le démon; puis les dépendances; puis jeedom… mailheureusement aucune amélioration à chaque étape.

Ce que je ne comprends pas, c’est que jeedom reçoit les bonnes informations dans les données brutes, mais ne les interprète pas. Si les données brutes sont reçues, je suppose que ce n’est pas un problème de connexion entre phoscon et jeedom.
Y a-t-il un moyen de traiter les données brutes d’une manière ou d’une autre via un script? Pour au moins vérifier si les capteurs fonctionnent?

Merci encore

5

Dans les logs je ne vois pas de réception d’informations

6

@loic On s’en doute que vous cherchez ! Mea Culpa pour la mauvaise interprétation de la clé API. Je voulais apporter de l’eau au moulin pour montrer que @sanji n’était pas seul dans le souci.

J’ai moi même constaté dans les données brutes des sondes Zigbee des horodatages de dernières communications qui étaient postérieures à la remontée d’information(lastupdate), ainsi que des données à jour dans phoscon qui étaient en inadéquation avec celles dans jeedom (complétement dans les choux), comme si un lien était coupé dans la communication entre les deux pour une quelconque raison…

7

C’est aussi ce que je remarque j’ai l’impression que le websocket entre jeedom et phoscon a un soucis (mais le démon devrait le voir et de relancer) ou alors que phoscon n’envoi pas les update sur le websocket. La seule fois où j’ai vu ça c’était un soucis de fuseau horaire dans phoscon (de mémoire dans le réseau zigbee il y a l’heure de phoscon et une option dans jeedom qui fait qu’il set le fuseau horaire toute les heures)

8

Je ne suis pas programmeur (juste ex IT support). Pour le fuseau horaire, je me dis que cela créerait un décalage de remontée (genre 1 ou 2 heures), mais j’étais personnellement à un encéphalogramme plat (jeedom m’a trahi sur le plat ! :slight_smile: ) depuis hier après-midi, soit une vingtaine d’heure…

image
image780×497 29 KB

9

Non non c’est pas si simple deconz a une heure et un fuseau interne et quand ya des soucis dessus ya juste plus de remontée (je pense c’est du a 2 process qui sont différents et se base pas sur la même heure). Par contre ça n’impact que les applications qui utilisent des websocket donc que la remontée d’information dans jeedom. Et phoscon ou la page des noeuds de jeedom

10

En allant sur Phoscon, j’ai noté que même si le fuseau horaire était enregistré correctement (GMT +1), l’heure indiquée était en retard de 2 heures (18h28 au lieu de 20h28)! J’ai enregistré « Paris » comme fuseau, et l’heure est alors apparue correctement.

Mais même après redémarrage du démon, rallumage de Phoscon, cela n’a pas corrigé le problème…

11

C’était une idée comme ça la j’ai toujours pas de log ni de capture d’écran donc j’essaye de deviner

12

De quoi avez-vous besoin? J’ai mis ce que j’ai trouvé, y compris les log en debug, mais je ne sais pas ce qu’il faut vraiment…

13

A ben si le log a pas bougé malgré le changement d’heure je sais pas d’où ça vient désolé… Deconz remonte pas l’info chez toi (j’ai pas le soucis chez moi si sur les centaines d’installation du plugin). Je pense le mieux serait de demander directement a deconz la

14

Non le log a tout de même bougé… mais je n’y trouve rien de vraiment clair. Surtout avec les heures qui se marchent dessus : 2 heures de différence donc, mais souvent des erreurs d’1 heure dans les logs…).

Voici les logs au moment de la correction de l’heure:

[2020-02-03 17:02:29.797][DEBUG] : Signal 15 caught, exiting...
[2020-02-03 17:02:29.798][DEBUG] : Shutdown
[2020-02-03 17:02:29.799][DEBUG] : Removing PID file /tmp/jeedom/deconz/deamon.pid
[2020-02-03 17:02:30.179][DEBUG] : LoopNetServer Thread stopped
[2020-02-03 17:02:30.308][DEBUG] : Exit 0
[2020-02-03 18:05:11][DEBUG] : 127.0.0.1:8484/api/B513B2AC31/sensors/7 type : POST
[2020-02-03 18:05:12][DEBUG] : 127.0.0.1:8484/api/B513B2AC31/sensors/8 type : POST
[2020-02-03 18:05:16][INFO] : Lancement démon deconz : /usr/bin/python3 /var/www/html/plugins/deconz/resources/deconzd/deconzd.py --loglevel debug --socketport 55088 --callback http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php --apikey 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR --cycle 0 --pid /tmp/jeedom/deconz/deamon.pid
[2020-02-03 17:05:36.153][INFO] : Start deconzd
[2020-02-03 17:05:36.154][INFO] : Log level : debug
[2020-02-03 17:05:36.155][INFO] : Socket port : 55088
[2020-02-03 17:05:36.155][INFO] : Socket host : localhost
[2020-02-03 17:05:36.156][INFO] : PID file : /tmp/jeedom/deconz/deamon.pid
[2020-02-03 17:05:36.157][INFO] : Apikey : 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR
[2020-02-03 17:05:36.157][INFO] : Callback : http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php
[2020-02-03 17:05:36.158][INFO] : Cycle : 0.0
[2020-02-03 17:05:36.158][DEBUG] : Writing PID 2929 to /tmp/jeedom/deconz/deamon.pid
[2020-02-03 17:05:36.159][DEBUG] : Init request module v2.22.0
[2020-02-03 17:05:36.201][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-02-03 17:05:36.304][DEBUG] : http://127.0.0.1:80 "GET /plugins/deconz/core/php/jeeDeconz.php?apikey=6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR HTTP/1.1" 200 0
[2020-02-03 17:05:36.311][DEBUG] : Start listening...
[2020-02-03 17:05:36.315][DEBUG] : Socket interface started
[2020-02-03 17:05:36.317][DEBUG] : LoopNetServer Thread started
[2020-02-03 17:05:36.318][DEBUG] : Listening on: [localhost:55088]
[2020-02-03 17:05:36.320][INFO] : Local DeconZ found
[2020-02-03 17:05:36.321][INFO] : Launching local DeconZ
[2020-02-03 17:05:36.324][INFO] : Log level deconz deamon debug
[2020-02-03 17:05:36.325][INFO] : Opt deconz deamon ['sudo', 'deCONZ', '--auto-connect=1', '--dbg-error=1', '--http-port=8484', '--ws-port=20877', '--upnp=0', '-platform', 'minimal', '--dbg-aps=2', '--dbg-info=2', '--dbg-zcl=2', '--dbg-zdp=2', '--dbg-http=2']
[2020-02-03 17:05:36.337][INFO] : Launched DeconZ with pid 3188
[2020-02-03 17:05:36.339][DEBUG] : Start socket thread
[2020-02-03 17:05:38.543][DEBUG] : Client connected to [127.0.0.1:39168]
[2020-02-03 17:05:38.545][DEBUG] : Message read from socket: b'{"apikey":"6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR","cmd":"addgateway","gateways":[{"id":"00212EFFFF042375","name":"Phoscon","internalipaddress":"127.0.0.1","internalport":"8484","websocketport":"20877","apikey":"B513B2AC31","manageTimeZone":"0"}]}'
[2020-02-03 17:05:38.546][DEBUG] : Client disconnected from [127.0.0.1:39168]
[2020-02-03 17:05:38.563][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-02-03 17:05:38.566][DEBUG] : Closing All Websockets
[2020-02-03 17:05:39.568][DEBUG] : Add gateway : Phoscon
[2020-02-03 17:05:39.570][DEBUG] : Starting WebSocket for Phoscon on ip 127.0.0.1 and port 20877
[2020-02-03 18:05:48][DEBUG] : 127.0.0.1:8484/api/B513B2AC31/sensors type : POST
[2020-02-03 18:05:48][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2020-02-03T17:05:42","status":200,"sunrise":"2020-02-03T06:56:47","sunset":"2020-02-03T16:39:55"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:04:23:75-01"},"10":{"config":{"battery":91,"on":true,"reachable":true,"temperature":1800},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Veranda","state":{"lastupdated":"2020-02-03T16:11:15","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:01:98:51-01-0006"},"11":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2600},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Bathroom","state":{"lastupdated":"2020-02-03T15:52:19","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:b5:fd-01-0006"},"12":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2600},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Rikyu","state":{"lastupdated":"2020-02-03T16:40:52","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:09:df-01-0006"},"13":{"config":{"battery":100,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion - Living Room","state":{"lastupdated":"2020-02-02T22:24:24","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:01:9c:b3:94-01-0406"},"14":{"config":{"battery":100,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion Sensor","state":{"lastupdated":"2020-02-03T06:36:43","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:02:23:c6:c2-01-0406"},"15":{"config":{"battery":100,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet","name":"Door - Entrance","state":{"lastupdated":"2020-02-03T06:52:02","open":false},"type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:c1:e8:a3-01-0006"},"16":{"config":{"battery":91,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion Sensor (2)","state":{"lastupdated":"2020-02-03T06:53:44","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:01:dc:2f:cc-01-0406"},"17":{"config":{"battery":78,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"lastupdated":"2020-02-03T16:31:30","temperature":2124},"swversion":"20161129","type":"ZHATemperature","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0402"},"18":{"config":{"battery":78,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"humidity":5949,"lastupdated":"2020-02-03T16:31:30"},"swversion":"20161129","type":"ZHAHumidity","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0405"},"19":{"config":{"battery":78,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"lastupdated":"2020-02-03T16:31:30","pressure":958},"swversion":"20161129","type":"ZHAPressure","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0403"},"20":{"config":{"battery":81,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"lastupdated":"2020-02-03T16:45:47","temperature":1282},"swversion":"20161129","type":"ZHATemperature","uniqueid":"00:15:8d:00:03:49:91:ed-01-0402"},"21":{"config":{"battery":81,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"humidity":8494,"lastupdated":"2020-02-03T16:45:47"},"swversion":"20161129","type":"ZHAHumidity","uniqueid":"00:15:8d:00:03:49:91:ed-01-0405"},"22":{"config":{"battery":81,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"lastupdated":"2020-02-03T16:45:47","pressure":958},"swversion":"20161129","type":"ZHAPressure","uniqueid":"00:15:8d:00:03:49:91:ed-01-0403"},"23":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2600},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - NEW","state":{"lastupdated":"2020-02-03T16:26:15","open":true},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:ca:0f:82-01-0006"},"24":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2400},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Living Room","state":{"lastupdated":"2020-02-03T16:33:41","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:01:96:b4-01-0006"},"25":{"config":{"battery":95,"on":true,"reachable":true,"temperature":3100},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Office","state":{"lastupdated":"2020-02-03T16:35:57","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:b6:07-01-0006"},"26":{"config":{"battery":100,"on":true,"reachable":false},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","mode":1,"modelid":"lumi.sensor_switch","name":"Switch - Radio","state":{"buttonevent":1004,"lastupdated":"2020-01-27T17:28:27"},"type":"ZHASwitch","uniqueid":"00:15:8d:00:01:e5:c6:e2-01-0006"},"6":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2500},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Parents","state":{"lastupdated":"2020-02-03T16:45:44","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:0b:96-01-0006"},"7":{"config":{"battery":68,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_ht","name":"Temp - spa (T5)","state":{"lastupdated":"2020-02-03T16:34:50","temperature":3835},"swversion":"20161026","type":"ZHATemperature","uniqueid":"00:15:8d:00:01:f5:3d:12-01-0402"},"8":{"config":{"battery":68,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_ht","name":"Temp - spa (T5)","state":{"humidity":9378,"lastupdated":"2020-02-03T16:34:50"},"swversion":"20161026","type":"ZHAHumidity","uniqueid":"00:15:8d:00:01:f5:3d:12-01-0405"},"9":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2500},"ep":1,"etag":"d62681c0b62752eb6d5ed11abab89134","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Guest","state":{"lastupdated":"2020-02-03T16:09:17","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:04:5c:ce-01-0006"}}
[2020-02-03 18:05:49][DEBUG] : 127.0.0.1:8484/api/B513B2AC31/lights type : POST
[2020-02-03 18:05:49][DEBUG] : []
[2020-02-03 18:06:06][DEBUG] : 127.0.0.1:8484/api/B513B2AC31/sensors/7 type : POST
[2020-02-03 18:06:06][DEBUG] : 127.0.0.1:8484/api/B513B2AC31/sensors/8 type : POST
[2020-02-03 18:06:24][DEBUG] : 127.0.0.1:8484/api type : POST
[2020-02-03 18:06:25][DEBUG] : Username for : Phoscon => {"username":"375B79E38E"}
[2020-02-03 18:06:25][DEBUG] : 127.0.0.1:8484/api/375B79E38E/config type : POST
[2020-02-03 18:06:30][DEBUG] : 127.0.0.1:8484/api type : POST
[2020-02-03 18:06:53][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 18:06:53][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 18:06:54][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 18:06:54][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 18:07:04][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 18:07:04][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:24:59][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:24:59][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:30:08][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:30:08][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:30:09][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:30:09][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
Exception in thread deconz_127.0.0.1:
Traceback (most recent call last):
File "/usr/lib/python3.5/threading.py", line 914, in _bootstrap_inner
self.run()
File "/usr/lib/python3.5/threading.py", line 862, in run
self._target(*self._args, **self._kwargs)
File "/var/www/html/plugins/deconz/resources/deconzd/deconzd.py", line 131, in wshandling
globals.WS[str(gatewayInfos['internalipaddress'])] = create_connection("ws://" + str(gatewayInfos['internalipaddress']) + ":" + str(gatewayInfos['websocketport']))
File "/usr/local/lib/python3.5/dist-packages/websocket/_core.py", line 515, in create_connection
websock.connect(url, **options)
File "/usr/local/lib/python3.5/dist-packages/websocket/_core.py", line 223, in connect
options.pop('socket', None))
File "/usr/local/lib/python3.5/dist-packages/websocket/_http.py", line 121, in connect
sock = _open_socket(addrinfo_list, options.sockopt, options.timeout)
File "/usr/local/lib/python3.5/dist-packages/websocket/_http.py", line 201, in _open_socket
raise err
File "/usr/local/lib/python3.5/dist-packages/websocket/_http.py", line 176, in _open_socket
sock.connect(address)
ConnectionRefusedError: [Errno 111] Connection refused
[2020-02-03 19:30:31.338][DEBUG] : Signal 15 caught, exiting...
[2020-02-03 19:30:31.340][DEBUG] : Shutdown
[2020-02-03 19:30:31.341][DEBUG] : Removing PID file /tmp/jeedom/deconz/deamon.pid
[2020-02-03 19:30:31.343][DEBUG] : Client connected to [127.0.0.1:40194]
[2020-02-03 19:30:31.345][DEBUG] : Message read from socket: b'{"apikey":"6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR","cmd":"addgateway","gateways":[{"id":"00212EFFFF042375","name":"Phoscon","internalipaddress":"127.0.0.1","internalport":"8484","websocketport":"20877","apikey":"375B79E38E","manageTimeZone":"0"}]}'
[2020-02-03 19:30:31.346][DEBUG] : Client disconnected from [127.0.0.1:40194]
[2020-02-03 19:30:31.347][DEBUG] : LoopNetServer Thread stopped
[2020-02-03 19:30:31.376][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-02-03 19:30:31.377][DEBUG] : Closing All Websockets
[2020-02-03 19:30:31.482][DEBUG] : Exit 0
[2020-02-03 20:30:39][INFO] : Lancement démon deconz : /usr/bin/python3 /var/www/html/plugins/deconz/resources/deconzd/deconzd.py --loglevel debug --socketport 55088 --callback http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php --apikey 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR --cycle 0 --pid /tmp/jeedom/deconz/deamon.pid
[2020-02-03 19:30:54.387][INFO] : Start deconzd
[2020-02-03 19:30:54.732][INFO] : Log level : debug
[2020-02-03 19:30:54.733][INFO] : Socket port : 55088
[2020-02-03 19:30:54.734][INFO] : Socket host : localhost
[2020-02-03 19:30:54.735][INFO] : PID file : /tmp/jeedom/deconz/deamon.pid
[2020-02-03 19:30:54.736][INFO] : Apikey : 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR
[2020-02-03 19:30:54.737][INFO] : Callback : http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php
[2020-02-03 19:30:54.738][INFO] : Cycle : 0.0
[2020-02-03 19:30:54.739][DEBUG] : Writing PID 22852 to /tmp/jeedom/deconz/deamon.pid
[2020-02-03 19:30:54.773][DEBUG] : Init request module v2.22.0
[2020-02-03 19:30:54.874][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-02-03 19:30:54.902][DEBUG] : http://127.0.0.1:80 "GET /plugins/deconz/core/php/jeeDeconz.php?apikey=6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR HTTP/1.1" 200 0
[2020-02-03 19:30:54.910][DEBUG] : Start listening...
[2020-02-03 19:30:54.913][DEBUG] : Socket interface started
[2020-02-03 19:30:54.915][DEBUG] : LoopNetServer Thread started
[2020-02-03 19:30:54.919][DEBUG] : Listening on: [localhost:55088]
[2020-02-03 19:30:54.918][INFO] : Local DeconZ found
[2020-02-03 19:30:54.921][INFO] : Launching local DeconZ
[2020-02-03 19:30:54.925][INFO] : Log level deconz deamon debug
[2020-02-03 19:30:54.926][INFO] : Opt deconz deamon ['sudo', 'deCONZ', '--auto-connect=1', '--dbg-error=1', '--http-port=8484', '--ws-port=20877', '--upnp=0', '-platform', 'minimal', '--dbg-aps=2', '--dbg-info=2', '--dbg-zcl=2', '--dbg-zdp=2', '--dbg-http=2']
[2020-02-03 19:30:54.943][INFO] : Launched DeconZ with pid 23457
[2020-02-03 19:30:54.946][DEBUG] : Start socket thread
[2020-02-03 19:30:57.387][DEBUG] : Client connected to [127.0.0.1:40634]
[2020-02-03 19:30:57.389][DEBUG] : Message read from socket: b'{"apikey":"6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR","cmd":"addgateway","gateways":[{"id":"00212EFFFF042375","name":"Phoscon","internalipaddress":"127.0.0.1","internalport":"8484","websocketport":"20877","apikey":"375B79E38E","manageTimeZone":"0"}]}'
[2020-02-03 19:30:57.396][DEBUG] : Client disconnected from [127.0.0.1:40634]
[2020-02-03 19:30:57.404][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-02-03 19:30:57.406][DEBUG] : Closing All Websockets
[2020-02-03 19:30:58.408][DEBUG] : Add gateway : Phoscon
[2020-02-03 19:30:58.410][DEBUG] : Starting WebSocket for Phoscon on ip 127.0.0.1 and port 20877
[2020-02-03 20:31:07][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors type : POST
[2020-02-03 20:31:10][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2020-02-03T19:31:09","status":230,"sunrise":"2020-02-03T06:56:47","sunset":"2020-02-03T16:39:55"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:04:23:75-01"},"10":{"config":{"battery":91,"on":true,"reachable":true,"temperature":1800},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Veranda","state":{"lastupdated":"2020-02-03T19:17:25","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:01:98:51-01-0006"},"11":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2600},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Bathroom","state":{"lastupdated":"2020-02-03T19:13:37","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:b5:fd-01-0006"},"12":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2600},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Rikyu","state":{"lastupdated":"2020-02-03T19:07:52","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:09:df-01-0006"},"13":{"config":{"battery":100,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion - Living Room","state":{"lastupdated":"2020-02-03T19:29:13","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:01:9c:b3:94-01-0406"},"14":{"config":{"battery":100,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion Sensor","state":{"lastupdated":"2020-02-03T19:24:52","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:02:23:c6:c2-01-0406"},"15":{"config":{"battery":100,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet","name":"Door - Entrance","state":{"lastupdated":"2020-02-03T19:17:31","open":false},"type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:c1:e8:a3-01-0006"},"16":{"config":{"battery":91,"duration":90,"on":true,"reachable":true,"temperature":0},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_motion","name":"Motion Sensor (2)","state":{"lastupdated":"2020-02-03T19:18:34","presence":false},"type":"ZHAPresence","uniqueid":"00:15:8d:00:01:dc:2f:cc-01-0406"},"17":{"config":{"battery":78,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"lastupdated":"2020-02-03T19:23:27","temperature":2121},"swversion":"20161129","type":"ZHATemperature","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0402"},"18":{"config":{"battery":78,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"humidity":5797,"lastupdated":"2020-02-03T19:23:27"},"swversion":"20161129","type":"ZHAHumidity","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0405"},"19":{"config":{"battery":78,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - X (T1)","state":{"lastupdated":"2020-02-03T19:23:27","pressure":956},"swversion":"20161129","type":"ZHAPressure","uniqueid":"00:15:8d:00:02:2b:69:6c-01-0403"},"20":{"config":{"battery":81,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"lastupdated":"2020-02-03T19:01:55","temperature":1266},"swversion":"20161129","type":"ZHATemperature","uniqueid":"00:15:8d:00:03:49:91:ed-01-0402"},"21":{"config":{"battery":81,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"humidity":8041,"lastupdated":"2020-02-03T19:01:55"},"swversion":"20161129","type":"ZHAHumidity","uniqueid":"00:15:8d:00:03:49:91:ed-01-0405"},"22":{"config":{"battery":81,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.weather","name":"Temp - Wine Cellar (T2)","state":{"lastupdated":"2020-02-03T19:01:55","pressure":956},"swversion":"20161129","type":"ZHAPressure","uniqueid":"00:15:8d:00:03:49:91:ed-01-0403"},"23":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2400},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - NEW","state":{"lastupdated":"2020-02-03T19:14:23","open":true},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:ca:0f:82-01-0006"},"24":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2400},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Living Room","state":{"lastupdated":"2020-02-03T19:09:03","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:01:96:b4-01-0006"},"25":{"config":{"battery":95,"on":true,"reachable":true,"temperature":3200},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Office","state":{"lastupdated":"2020-02-03T19:08:48","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:b6:07-01-0006"},"26":{"config":{"battery":100,"on":true,"reachable":false},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","mode":1,"modelid":"lumi.sensor_switch","name":"Switch - Radio","state":{"buttonevent":1004,"lastupdated":"2020-01-27T17:28:27"},"type":"ZHASwitch","uniqueid":"00:15:8d:00:01:e5:c6:e2-01-0006"},"6":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2500},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Window - Parents","state":{"lastupdated":"2020-02-03T19:07:15","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:01:b7:0b:96-01-0006"},"7":{"config":{"battery":71,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_ht","name":"Temp - spa (T5)","state":{"lastupdated":"2020-02-03T19:12:37","temperature":3810},"swversion":"20161026","type":"ZHATemperature","uniqueid":"00:15:8d:00:01:f5:3d:12-01-0402"},"8":{"config":{"battery":71,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_ht","name":"Temp - spa (T5)","state":{"humidity":9374,"lastupdated":"2020-02-03T19:12:37"},"swversion":"20161026","type":"ZHAHumidity","uniqueid":"00:15:8d:00:01:f5:3d:12-01-0405"},"9":{"config":{"battery":100,"on":true,"reachable":true,"temperature":2500},"ep":1,"etag":"5904148a9ea4a90e90ca499972631e28","manufacturername":"LUMI","modelid":"lumi.sensor_magnet.aq2","name":"Door - Guest","state":{"lastupdated":"2020-02-03T19:13:16","open":false},"swversion":"20161128","type":"ZHAOpenClose","uniqueid":"00:15:8d:00:02:04:5c:ce-01-0006"}}
[2020-02-03 20:31:11][DEBUG] : 127.0.0.1:8484/api/375B79E38E/lights type : POST
[2020-02-03 20:31:11][DEBUG] : []
[2020-02-03 20:36:05][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:36:05][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:36:07][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:36:07][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:38:48][INFO] : Lancement démon deconz : /usr/bin/python3 /var/www/html/plugins/deconz/resources/deconzd/deconzd.py --loglevel debug --socketport 55088 --callback http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php --apikey 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR --cycle 0 --pid /tmp/jeedom/deconz/deamon.pid
[2020-02-03 19:38:58.772][INFO] : Start deconzd
[2020-02-03 19:38:58.773][INFO] : Log level : debug
[2020-02-03 19:38:58.773][INFO] : Socket port : 55088
[2020-02-03 19:38:58.774][INFO] : Socket host : localhost
[2020-02-03 19:38:58.775][INFO] : PID file : /tmp/jeedom/deconz/deamon.pid
[2020-02-03 19:38:58.775][INFO] : Apikey : 6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR
[2020-02-03 19:38:58.776][INFO] : Callback : http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php
[2020-02-03 19:38:58.777][INFO] : Cycle : 0.0
[2020-02-03 19:38:58.777][DEBUG] : Writing PID 2768 to /tmp/jeedom/deconz/deamon.pid
[2020-02-03 19:38:58.779][DEBUG] : Init request module v2.22.0
[2020-02-03 19:38:58.838][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-02-03 19:39:01.476][DEBUG] : http://127.0.0.1:80 "GET /plugins/deconz/core/php/jeeDeconz.php?apikey=6TqO95wEfmJsbRhSsWmbcBUJRCDMDhtR HTTP/1.1" 200 0
[2020-02-03 19:39:01.483][DEBUG] : Start listening...
[2020-02-03 19:39:01.486][DEBUG] : Socket interface started
[2020-02-03 19:39:01.489][DEBUG] : LoopNetServer Thread started
[2020-02-03 19:39:01.490][DEBUG] : Listening on: [localhost:55088]
[2020-02-03 19:39:01.492][INFO] : Local DeconZ found
[2020-02-03 19:39:01.493][INFO] : Launching local DeconZ
[2020-02-03 19:39:01.496][INFO] : Log level deconz deamon debug
[2020-02-03 19:39:01.497][INFO] : Opt deconz deamon ['sudo', 'deCONZ', '--auto-connect=1', '--dbg-error=1', '--http-port=8484', '--ws-port=20877', '--upnp=0', '-platform', 'minimal', '--dbg-aps=2', '--dbg-info=2', '--dbg-zcl=2', '--dbg-zdp=2', '--dbg-http=2']
[2020-02-03 19:39:01.508][INFO] : Launched DeconZ with pid 2966
[2020-02-03 19:39:01.510][DEBUG] : Start socket thread
[2020-02-03 20:40:23][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:40:30][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:42:55][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:42:55][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:43:00][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/7 type : POST
[2020-02-03 20:43:02][DEBUG] : 127.0.0.1:8484/api/375B79E38E/sensors/8 type : POST
[2020-02-03 20:43:36][DEBUG] : 127.0.0.1:8484/api type : POST
[2020-02-03 20:43:36][DEBUG] : Username for : Phoscon => {"username":"4076FDDDB1"}
[2020-02-03 20:43:36][DEBUG] : 127.0.0.1:8484/api/4076FDDDB1/config type : POST
[2020-02-03 20:46:16][DEBUG] : 127.0.0.1:8484/api/4076FDDDB1/sensors/7 type : POST
[2020-02-03 20:46:16][DEBUG] : 127.0.0.1:8484/api/4076FDDDB1/sensors/8 type : POST
15

Ya rien qui est envoyé dans le websocket, malheureusement j’y peux rien et comme dit la seule fois ou j’ai vu ca c’était le fuseau horraire interne a deconz qui était pas bien réglé.

16

Bonsoir,
Avez-vous trouvé le problème ?
J’ai le même genre de soucis depuis plusieurs mois, ma clé conbee II est parfaitement connectée, je vois mes actions de capteurs dans les logs deconzServer, en ouvrant l’équipement sur Jeedom je vois bien la date de mise à jour, MAIS sur le widget rien ne bouge et la date en tooltip qui s’affiche est restée figée.
J’ai bien entendu essayé de redémarrer le plugin, changé la clé API, supprimer et recréer l’équipement, basculer en binaire / numérique, etc.
Merci pour votre aide

Edit : je précise que tout fonctionnait bien ce n’est pas une nouvelle installation. C’est le même comportement pour tous mes équipement Xiamoi (capteur ouverture, présence, bouton poussoir, capteur d’inondation, etc.)

17

En ce qui me concerne, le problème a disparu suite à une énième relance du plugin. Loïc explique que le daemon deconz perd la connexion de type websocket avec jeedom, c’est pour cela qu’on peut encore passer des commandes mais qu’on perd tous les retours d’état.

En partageant, nos différentes expériences autour de ce problème, on se sent moins seul quand il survient et c’est déjà çà…

Tiens nous au courant.

18

Merci pour ton retour.
Est-ce que tu voyais le retour d’état de tes équipements dans les logs quand ca ne marchait pas ?

19

Je ne crois pas, en tout cas pas dans les logs de jeedom, pour les logs de deconz je ne sais plus dire

20

OK, car moi ce qui me surprend c’est que je vois tout passer dans mes logs jeedom sur mes équipements :frowning_face:

Même sur l’équipement je vois la date de dernier évènement.

deconz_03
deconz_03774×447 140 KB

Par contre sur le widget ca garde la date de création de l’équipement et bien entendu aucune mise à jour de visible par le widget (ni dans les scenarios ou autre)

deconz_02