Bonjour,
J’ai le même équipement de 1 mois et je n’avais pas constaté ces limitations.
Il faut dire que mon scénario se limite à 5 minutes maxi d’arrosage que je renouvelle 2 fois dans la nuit (23h & 06h) et ne tient pas compte de la consommation (pour l’instant)
Est-ce du au fait que la commande est crée en 1::1070::0 alors que dans les infos brutes le cluster est 1::1028::0
{
"ieee": "2c:11:65:ff:fe:b3:d0:15",
"nwk": 6391,
"status": 2,
"lqi": "128",
"rssi": "-68",
"last_seen": "1648460045.3962774",
"node_descriptor": "02:40:80:02:10:52:52:00:00:2c:52:00:00",
"endpoints": [
{
"id": 1,
"status": 1,
"device_type": 256,
"profile_id": 260,
"manufacturer": "_TZE200_akjefhj5",
"model": "TS0601",
"output_clusters": [
{
"id": 10,
"name": "Time",
"attributes": []
},
{
"id": 25,
"name": "Ota",
"attributes": []
}
],
"input_clusters": [
{
"id": 0,
"name": "Basic",
"attributes": [
{
"id": 0,
"name": "zcl_version",
"value": 3
},
{
"id": 1,
"name": "app_version",
"value": 85
},
{
"id": 2,
"name": "stack_version",
"value": 0
},
{
"id": 3,
"name": "hw_version",
"value": 1
},
{
"id": 4,
"name": "manufacturer",
"value": "_TZE200_akjefhj5"
},
{
"id": 5,
"name": "model",
"value": "TS0601"
},
{
"id": 6,
"name": "date_code",
"value": ""
},
{
"id": 7,
"name": "power_source",
"value": 3
}
]
},
{
"id": 4,
"name": "Groups",
"attributes": []
},
{
"id": 5,
"name": "Scenes",
"attributes": []
},
{
"id": 61184,
"name": "Tuya Manufacturer Specific",
"attributes": []
},
{
"id": 1028,
"name": "Flow Measurement",
"attributes": [
{
"id": 0,
"name": "measured_value",
"value": 5.204941218676538
}
]
},
{
"id": 6,
"name": "On\/Off",
"attributes": [
{
"id": 0,
"name": "on_off",
"value": 0
}
]
},
{
"id": 1,
"name": "Power Configuration",
"attributes": [
{
"id": 33,
"name": "battery_percentage_remaining",
"value": 75
}
]
},
{
"id": 1086,
"name": "Timer",
"attributes": [
{
"id": 12,
"name": "state",
"value": 2
},
{
"id": 11,
"name": "time_left",
"value": 7
},
{
"id": 15,
"name": "last_valve_open_duration",
"value": 3
}
]
}
]
}
],
"signature": {
"manufacturer": "_TZE200_akjefhj5",
"model": "TS0601",
"node_desc": {
"logical_type": 2,
"complex_descriptor_available": 0,
"user_descriptor_available": 0,
"reserved": 0,
"aps_flags": 0,
"frequency_band": 8,
"mac_capability_flags": 128,
"manufacturer_code": 4098,
"maximum_buffer_size": 82,
"maximum_incoming_transfer_size": 82,
"server_mask": 11264,
"maximum_outgoing_transfer_size": 82,
"descriptor_capability_field": 0
},
"endpoints": {
"1": {
"profile_id": 260,
"device_type": 256,
"input_clusters": [
0,
4,
5,
61184,
1028,
6,
1,
1086
],
"output_clusters": [
10,
25
]
}
}
},
"class": "zgv1"
}
Peut-être faut-il modifier la valeur d’état (State) du Timer présente en 1::1086::12 ?
"id": 1086,
"name": "Timer",
"attributes": [
{
"id": 12,
"name": "state",
"value": 2
Ou modifier la valeur par défaut (time_left = 10) en 1::1086::11 car celle-ci vient se décrémenter en fonction de la durée d’arrosage (last_valve_open_duration) présente en 1::1086::15.
Dans mon exemple (infos brutes jointes) le time_left est passé de 10 à 7 après un arrosage de 3 minutes.
Si @Loic pouvait vérifier l’ID (1::1028 vs 1::1070) pour la conso
et peut-être modifier les commandes ci-dessus (1::1086::11 et 15) en action afin de nous permettre de changer leurs valeurs par défaut.
A votre disposition pour tester le cas échéant