RFXcom perturbé par 4chpro3?

Plugins Protocole domotique
,
1

Bonjour,

Je fonctionne depuis 2 ans avec un Jeedom Smart avec RFXcom, Conbee2, et zwave intégré
Je suis passé à Jeedom 4.1.2 en Janvier, je suis actuellement en 4.1.22.

Depuis un mois environ, j’ai le plugin RFXcom qui plante régulierement. Parfois le daemon redémarre automatiquement, parfois non. Quand je redemarre manuellement c’est reparti pour généralement au moins 24h, parfois plus. J’ai relancé l’installation des dépendances avec succès, mais cela ne change rien au comportement.

Dans les logs je voit bien passer le I/O Erreur 5:

[2021-06-03 16:58:36][DEBUG] : Message: 08200a100000000669
[2021-06-03 16:58:36][DEBUG] : Decode : 08200a100000000669
[2021-06-03 16:58:36][DEBUG] : Test message: 08200a100000000669
[2021-06-03 16:58:36][DEBUG] : PacketType: 0x20
[2021-06-03 16:58:36][DEBUG] : Length: 9
[2021-06-03 16:58:36][DEBUG] : Start decoding packet type 0x20
[2021-06-03 16:58:36][DEBUG] : Subtype = RM174RF,RM175RF no alive packets
[2021-06-03 16:58:36][DEBUG] : Data : {'packetlen': '0x08', 'packettype': '0x20', 'subtype': '0x0A', 'seqnbr': '0x10', 'id1': '0x00', 'id2': '0x00', 'id3': '0x00', 'status': 6, 'battery': 9, 'rssi': 6}
[2021-06-03 16:58:36][DEBUG] : Decoded info : {'packettype': '0x20', 'subtype': '0x0A', 'id': '000000', 'status': 6, 'battery': 9, 'rssi': 6}
[2021-06-03 16:58:36][DEBUG] : unknown device id : 000000
[2021-06-03 18:50:12][ERROR] : Error in read_rfxcom: [Errno 5] Input/output error
[2021-06-03 18:50:12][ERROR] : Exit 1 because this exeption is fatal
[2021-06-03 18:50:12][DEBUG] : Shutdown
[2021-06-03 18:50:12][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2021-06-03 18:50:13][DEBUG] : LoopNetServer Thread stopped
[2021-06-03 18:50:13][DEBUG] : Close serial port
[2021-06-03 18:50:13][DEBUG] : Serial port closed
[2021-06-03 18:50:13][DEBUG] : Exit 0

Depuis un mois j’ai domotisé mon arrosage, en utilisant 2 SonOff 4chPRO3 flashé en ESPeasy (cf. Jardin Arrosage automatique selon humidité et météo) et ils sont positionnés proche du jeedom-smart.

Depuis une semaine j’ai mis en place un script qui vérifie tout les 5min l’état du daemon du plugin RFXCom et m’envoi un SMS si non-ok.
Cela fait 2jrs que je recois un sms vers 20h50
Et je commence l’arrosage aux alentours de 20h30 en ce moment (1h avant coucher soleil)

Sachant que le 4chPRO peut etre piloté en 433Mhz, pensez vous qu’il peut y avoir un lien de cause à effet ?

Merci d’avance pour vos idees et pistes :slight_smile:

Quatsch

2

Je ne pense pas que ton 4chpro3 puisse perturber ton RFXcom, surtout que la partie 433 du 4ch est juste un récepteur.
Mais par contre si tu es passé dernièrement en 4.1.22 , tu devrais regarder si ton RFXcom est bien a jour.
J’ai eu ce problème en passant en V4 sauf que plus rien ne fonctionnait avec le RFXcom. Tu devrais même retrouver les sujets… j’étais pas le seul.

1 « J'aime »
3

Bjr,
Comme d’habitude, veuillez préciser version du RFXCOM et son Firmware !
Log lors du redémarrage du démon !

INFO sur Erreur Errno 5 Input/output error

Doc du Plugin, reprise ci-dessous
J’ai l’erreur [Errno 5] Input/output error

Cette erreur est malheureusement matériel (problème de communication avec le RFXcom). Souvent c’est du à un soucis d’alimentation ou de câble USB, vous pouvez donc essayer en changent le câble USB et/ou en passant par un hub USB alimenté

4

Voici les logs

[2021-06-05 13:27:46][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB3 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 12,13,18,20,21,22,23 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6 --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2021-06-05 11:27:46][INFO] : Start rfxcomd
[2021-06-05 11:27:46][INFO] : Log level : debug
[2021-06-05 11:27:46][INFO] : Socket port : 55000
[2021-06-05 11:27:46][INFO] : Socket host : 127.0.0.1
[2021-06-05 11:27:46][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2021-06-05 11:27:46][INFO] : Device : /dev/ttyUSB3
[2021-06-05 11:27:46][INFO] : Apikey : DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6
[2021-06-05 11:27:46][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2021-06-05 11:27:46][INFO] : Cycle : 0.3
[2021-06-05 11:27:46][INFO] : Serial rate : 38400
[2021-06-05 11:27:46][INFO] : Serial timeout : 9
[2021-06-05 11:27:46][INFO] : Protocol : 12,13,18,20,21,22,23
[2021-06-05 11:27:46][INFO] : Find device : /dev/ttyUSB3
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x02 : Receiver/Transmitter Message
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x1C : Edisio
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2021-06-05 11:27:46][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2021-06-05 11:27:46][DEBUG] : Writing PID 19304 to /tmp/jeedom/rfxcom/deamon.pid
[2021-06-05 11:27:46][DEBUG] : Init request module v2.21.0
[2021-06-05 11:27:46][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-06-05 13:27:46][DEBUG] : null
[2021-06-05 11:27:46][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6 HTTP/1.1" 200 0
[2021-06-05 11:27:46][DEBUG] : Init serial module v3.5
[2021-06-05 11:27:46][DEBUG] : Start listening...
[2021-06-05 11:27:46][DEBUG] : Socket interface started
[2021-06-05 11:27:46][DEBUG] : LoopNetServer Thread started
[2021-06-05 11:27:46][DEBUG] : Listening on: [127.0.0.1:55000]
[2021-06-05 11:27:46][DEBUG] : Open serial port on device: /dev/ttyUSB3, rate 38400, timeout : 9
[2021-06-05 11:27:46][DEBUG] : Open Serialport
[2021-06-05 11:27:47][DEBUG] : flushOutput serial port
[2021-06-05 11:27:47][DEBUG] : flushInput serial port
[2021-06-05 11:27:47][DEBUG] : flushOutput serial port
[2021-06-05 11:27:47][DEBUG] : flushInput serial port
[2021-06-05 11:27:47][DEBUG] : Read Socket Thread Launched
[2021-06-05 11:27:47][DEBUG] : Read Device Thread Launched
[2021-06-05 11:27:48][DEBUG] : Send rfxcomd_reset
[2021-06-05 11:27:48][DEBUG] : Write data to serial port : 0d00000000000000000000000000
[2021-06-05 11:27:48][DEBUG] : Sleep 1 sec
[2021-06-05 11:27:49][DEBUG] : flushInput serial port
[2021-06-05 11:27:49][DEBUG] : Send get status test
[2021-06-05 11:27:49][DEBUG] : Write data to serial port : 0d00000102000000000000000000
[2021-06-05 11:27:49][DEBUG] : Message: 14010001025329000c2f0003001c10604658434f4d
[2021-06-05 11:27:49][DEBUG] : Decode : 14010001025329000c2f0003001c10604658434f4d
[2021-06-05 11:27:49][DEBUG] : Test message: 14010001025329000c2f0003001c10604658434f4d
[2021-06-05 11:27:49][DEBUG] : PacketType: 0x01
[2021-06-05 11:27:49][DEBUG] : Length: 21
[2021-06-05 11:27:49][DEBUG] : Start decoding packet type 0x01
[2021-06-05 11:27:49][DEBUG] : Data : {'packetlen': '0x14', 'packettype': '0x01', 'subtype': '0x00', 'seqnbr': '0x01', 'cmnd': '0x02', 'msg1': '0x53', 'msg2': '0x29', 'msg3': '0x00', 'msg4': '0x0C', 'msg5': '0x2F', 'msg6': '0x00', 'msg7': '0x03', 'msg8': '0x00', 'msg9': 28, 'msg10': '0x10', 'msg11': '0x60', 'msg12': '0x46', 'msg13': '0x58', 'msg14': '0x43', 'msg15': '0x4F', 'msg16': '0x4D'}
[2021-06-05 11:27:49][DEBUG] : Subtype = response on a mode command
[2021-06-05 11:27:49][DEBUG] : Firmware version = 0x29
[2021-06-05 11:27:49][DEBUG] : RFXtrx433 operating at 433.92MHz
[2021-06-05 11:27:49][DEBUG] : Hardware major version = 0x03
[2021-06-05 11:27:49][DEBUG] : Hardware minor version = 0x00
[2021-06-05 11:27:49][DEBUG] : Output power = 10 dBm
[2021-06-05 11:27:49][DEBUG] : Firmware ProXL1
[2021-06-05 11:27:49][DEBUG] : Noise level (only used in special firmware) = 0x60
[2021-06-05 11:27:49][DEBUG] : undec on : 0
[2021-06-05 11:27:49][DEBUG] : Imagintronix,Opus/Alecto2010/Alecto : 0
[2021-06-05 11:27:49][DEBUG] : Byron SX,SelectPlus/Alecto5500 : 0
[2021-06-05 11:27:49][DEBUG] : RSL,Revolt/La Crosse : 0
[2021-06-05 11:27:49][DEBUG] : Lighting4/Davis EU : 0
[2021-06-05 11:27:49][DEBUG] : FineOffset,Viking/Davis US : 0
[2021-06-05 11:27:49][DEBUG] : Rubicson,Alecto,Banggood/Davis AU : 0
[2021-06-05 11:27:49][DEBUG] : AE Blyss : 0
[2021-06-05 11:27:49][DEBUG] : BlindsTx : 0
[2021-06-05 11:27:49][DEBUG] : BlindsT0 : 0
[2021-06-05 11:27:49][DEBUG] : Proguard : 0
[2021-06-05 11:27:49][DEBUG] : Legrand CAD : 0
[2021-06-05 11:27:49][DEBUG] : La Crosse : 1
[2021-06-05 11:27:49][DEBUG] : Hideki,TFA,Cresta,UPM/FS20 : 1
[2021-06-05 11:27:49][DEBUG] : AD LightwaveRF : 0
[2021-06-05 11:27:49][DEBUG] : Mertik/Edisio : 0
[2021-06-05 11:27:49][DEBUG] : Visonic : 0
[2021-06-05 11:27:49][DEBUG] : ATI/cartelectronic/Meiantech,Atlantic : 0
[2021-06-05 11:27:49][DEBUG] : Oregon Scientific/Keeloq : 1
[2021-06-05 11:27:49][DEBUG] : Meiantech,Atlantic/Proguard : 0
[2021-06-05 11:27:49][DEBUG] : HomeEasy EU : 1
[2021-06-05 11:27:49][DEBUG] : AC : 1
[2021-06-05 11:27:49][DEBUG] : ARC : 1
[2021-06-05 11:27:49][DEBUG] : X10 : 1
[2021-06-05 11:27:49][DEBUG] : FunkBus 433.42/Itho CVE RFT : 0
[2021-06-05 11:27:49][DEBUG] : MCZ 434.50/Itho CVE ECO RFT : 0
[2021-06-05 11:27:49][DEBUG] : Honeywell Chime : 0
[2021-06-05 11:27:49][DEBUG] : HomeConfort,Fan : 0
[2021-06-05 11:27:49][DEBUG] : Keeloq : 0
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43275]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"01286EFE"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43275]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43276]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"012DF202"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43276]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43277]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"012DEE9E"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43277]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43278]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"40155F"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43278]
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '01286EFE'}
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43279]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"40155F"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43279]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43280]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"39810C1D"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43280]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43281]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"40155F"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43281]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43282]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"02095A06"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43282]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43283]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"35894F7A"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43283]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43284]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"7898BAF7"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43284]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43285]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"3442A9F1"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43285]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43286]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"74460308"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43286]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43287]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"0235A77A"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43287]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43288]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"0235CD0A"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43288]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43289]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"0235B0DE"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43289]
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '012DF202'}
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43290]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"0235B99A"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43290]
[2021-06-05 11:27:49][DEBUG] : Client connected to [127.0.0.1:43291]
[2021-06-05 11:27:49][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"01D0AB32"}}'
[2021-06-05 11:27:49][DEBUG] : Client disconnected from [127.0.0.1:43291]
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '012DEE9E'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '40155F'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '40155F'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '39810C1D'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '40155F'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '02095A06'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '35894F7A'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '7898BAF7'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '3442A9F1'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '74460308'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '0235A77A'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '0235CD0A'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '0235B0DE'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '0235B99A'}
[2021-06-05 11:27:49][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:49][DEBUG] : Add device : {'id': '01D0AB32'}
[2021-06-05 11:27:50][DEBUG] : msg3: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2021-06-05 11:27:50][DEBUG] : msg4: [0, 0, 0, 0, 1, 1, 0, 0] / 0c
[2021-06-05 11:27:50][DEBUG] : msg5: [0, 0, 1, 0, 1, 1, 1, 1] / 2f
[2021-06-05 11:27:50][DEBUG] : msg6: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2021-06-05 11:27:50][DEBUG] : Command: 0d00000203531C000c2f00000000
[2021-06-05 11:27:50][DEBUG] : Protocol actually activated 000c2f00
[2021-06-05 11:27:50][DEBUG] : Actual Frequency 53
[2021-06-05 11:27:50][DEBUG] : Wanted protocol 000c2f00
[2021-06-05 11:27:50][DEBUG] : Client connected to [127.0.0.1:43292]
[2021-06-05 11:27:50][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"3902DAC7"}}'
[2021-06-05 11:27:50][DEBUG] : Client disconnected from [127.0.0.1:43292]
[2021-06-05 11:27:50][DEBUG] : Client connected to [127.0.0.1:43293]
[2021-06-05 11:27:50][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"0B68B3EE"}}'
[2021-06-05 11:27:50][DEBUG] : Client disconnected from [127.0.0.1:43293]
[2021-06-05 11:27:50][DEBUG] : Client connected to [127.0.0.1:43294]
[2021-06-05 11:27:50][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"673EDF0E"}}'
[2021-06-05 11:27:50][DEBUG] : Client disconnected from [127.0.0.1:43294]
[2021-06-05 13:27:50][INFO] : Démon RFXcom lancé
[2021-06-05 11:27:50][DEBUG] : Client connected to [127.0.0.1:43295]
[2021-06-05 11:27:50][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"570902"}}'
[2021-06-05 11:27:50][DEBUG] : Client disconnected from [127.0.0.1:43295]
[2021-06-05 11:27:50][DEBUG] : Client connected to [127.0.0.1:43296]
[2021-06-05 11:27:50][DEBUG] : Message read from socket: b'{"apikey":"DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6","cmd":"add","device":{"id":"47152249"}}'
[2021-06-05 11:27:50][DEBUG] : Client disconnected from [127.0.0.1:43296]
[2021-06-05 11:27:50][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:50][DEBUG] : Add device : {'id': '3902DAC7'}
[2021-06-05 11:27:50][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:50][DEBUG] : Add device : {'id': '0B68B3EE'}
[2021-06-05 11:27:50][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:50][DEBUG] : Add device : {'id': '673EDF0E'}
[2021-06-05 11:27:50][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:50][DEBUG] : Add device : {'id': '570902'}
[2021-06-05 11:27:50][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-06-05 11:27:50][DEBUG] : Add device : {'id': '47152249'}
5

Version pas à jour du Firmware

1 « J'aime »
6

version 41 donc pas à jour … et tous les protocoles activés :exploding_head:…
Il y a moyen de faire beaucoup mieux

7

Les protocoles activés ne doivent pas posés problèmes …
je test avec le maxi ( tout sauf 0 , 8, 9, 17, 24) …

8

Quand on maitrise le truc, sans doute…
Mais dans un cas comme ici, ça éviterai une charge coté plugin et de récupérer les trames des voisins dont à strictement rien à faire… et des debugs plus legers

9

On va voir après MAJ du « Firmware » si ok…
Mais je penche pour un problème d’USB …

10

Merci pour votre aide, j’ai donc mis à jour en 44, et désactivé les protocoles à priori inutiles:

[2021-06-05 14:00:38][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB2 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 21,22 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6 --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2021-06-05 12:00:39][INFO] : Start rfxcomd
[2021-06-05 12:00:39][INFO] : Log level : debug
[2021-06-05 12:00:39][INFO] : Socket port : 55000
[2021-06-05 12:00:39][INFO] : Socket host : 127.0.0.1
[2021-06-05 12:00:39][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2021-06-05 12:00:39][INFO] : Device : /dev/ttyUSB2
[2021-06-05 12:00:39][INFO] : Apikey : DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6
[2021-06-05 12:00:39][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2021-06-05 12:00:39][INFO] : Cycle : 0.3
[2021-06-05 12:00:39][INFO] : Serial rate : 38400
[2021-06-05 12:00:39][INFO] : Serial timeout : 9
[2021-06-05 12:00:39][INFO] : Protocol : 21,22
[2021-06-05 12:00:39][INFO] : Find device : /dev/ttyUSB2
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x02 : Receiver/Transmitter Message
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x1C : Edisio
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2021-06-05 12:00:39][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2021-06-05 12:00:39][DEBUG] : Writing PID 21267 to /tmp/jeedom/rfxcom/deamon.pid
[2021-06-05 12:00:39][DEBUG] : Init request module v2.21.0
[2021-06-05 12:00:39][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-06-05 14:00:39][DEBUG] : null
[2021-06-05 12:00:39][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=DwQCFdhKqdt2yKikvw4OS3W1RGLOtkl6 HTTP/1.1" 200 0
[2021-06-05 12:00:39][DEBUG] : Init serial module v3.5
[2021-06-05 12:00:39][DEBUG] : Start listening...
[2021-06-05 12:00:39][DEBUG] : Socket interface started
[2021-06-05 12:00:39][DEBUG] : LoopNetServer Thread started
[2021-06-05 12:00:39][DEBUG] : Listening on: [127.0.0.1:55000]
[2021-06-05 12:00:39][DEBUG] : Open serial port on device: /dev/ttyUSB2, rate 38400, timeout : 9
[2021-06-05 12:00:39][DEBUG] : Open Serialport
[2021-06-05 12:00:39][DEBUG] : flushOutput serial port
[2021-06-05 12:00:39][DEBUG] : flushInput serial port
[2021-06-05 12:00:39][DEBUG] : flushOutput serial port
[2021-06-05 12:00:39][DEBUG] : flushInput serial port
[2021-06-05 12:00:39][DEBUG] : Read Socket Thread Launched
[2021-06-05 12:00:39][DEBUG] : Read Device Thread Launched
[2021-06-05 12:00:40][DEBUG] : Send rfxcomd_reset
[2021-06-05 12:00:40][DEBUG] : Write data to serial port : 0d00000000000000000000000000
[2021-06-05 12:00:40][DEBUG] : Sleep 1 sec
[2021-06-05 12:00:41][DEBUG] : flushInput serial port
[2021-06-05 12:00:41][DEBUG] : Send get status test
[2021-06-05 12:00:41][DEBUG] : Write data to serial port : 0d00000102000000000000000000
[2021-06-05 12:00:41][DEBUG] : Message: 1401000102532c000c2f0003001c105f4658434f4d
[2021-06-05 12:00:41][DEBUG] : Decode : 1401000102532c000c2f0003001c105f4658434f4d
[2021-06-05 12:00:41][DEBUG] : Test message: 1401000102532c000c2f0003001c105f4658434f4d
[2021-06-05 12:00:41][DEBUG] : PacketType: 0x01
[2021-06-05 12:00:41][DEBUG] : Length: 21
[2021-06-05 12:00:41][DEBUG] : Start decoding packet type 0x01
[2021-06-05 12:00:41][DEBUG] : Data : {'packetlen': '0x14', 'packettype': '0x01', 'subtype': '0x00', 'seqnbr': '0x01', 'cmnd': '0x02', 'msg1': '0x53', 'msg2': '0x2C', 'msg3': '0x00', 'msg4': '0x0C', 'msg5': '0x2F', 'msg6': '0x00', 'msg7': '0x03', 'msg8': '0x00', 'msg9': 28, 'msg10': '0x10', 'msg11': '0x5F', 'msg12': '0x46', 'msg13': '0x58', 'msg14': '0x43', 'msg15': '0x4F', 'msg16': '0x4D'}
[2021-06-05 12:00:41][DEBUG] : Subtype = response on a mode command
[2021-06-05 12:00:41][DEBUG] : Firmware version = 0x2C
[2021-06-05 12:00:41][DEBUG] : RFXtrx433 operating at 433.92MHz
[2021-06-05 12:00:41][DEBUG] : Hardware major version = 0x03
[2021-06-05 12:00:41][DEBUG] : Hardware minor version = 0x00
[2021-06-05 12:00:41][DEBUG] : Output power = 10 dBm
[2021-06-05 12:00:41][DEBUG] : Firmware ProXL1
[2021-06-05 12:00:41][DEBUG] : Noise level (only used in special firmware) = 0x5F
[2021-06-05 12:00:41][DEBUG] : undec on : 0
[2021-06-05 12:00:41][DEBUG] : Imagintronix,Opus/Alecto2010/Alecto : 0
[2021-06-05 12:00:41][DEBUG] : Byron SX,SelectPlus/Alecto5500 : 0
[2021-06-05 12:00:41][DEBUG] : RSL,Revolt/La Crosse : 0
[2021-06-05 12:00:41][DEBUG] : Lighting4/Davis EU : 0
[2021-06-05 12:00:41][DEBUG] : FineOffset,Viking/Davis US : 0
[2021-06-05 12:00:41][DEBUG] : Rubicson,Alecto,Banggood/Davis AU : 0
[2021-06-05 12:00:41][DEBUG] : AE Blyss : 0
[2021-06-05 12:00:41][DEBUG] : BlindsTx : 0
[2021-06-05 12:00:41][DEBUG] : BlindsT0 : 0
[2021-06-05 12:00:41][DEBUG] : Proguard : 0
[2021-06-05 12:00:41][DEBUG] : Legrand CAD : 0
[2021-06-05 12:00:41][DEBUG] : La Crosse : 1
[2021-06-05 12:00:41][DEBUG] : Hideki,TFA,Cresta,UPM/FS20 : 1
[2021-06-05 12:00:41][DEBUG] : AD LightwaveRF : 0
[2021-06-05 12:00:41][DEBUG] : Mertik/Edisio : 0
[2021-06-05 12:00:41][DEBUG] : Visonic : 0
[2021-06-05 12:00:41][DEBUG] : ATI/cartelectronic/Meiantech,Atlantic : 0
[2021-06-05 12:00:41][DEBUG] : Oregon Scientific/Keeloq : 1
[2021-06-05 12:00:41][DEBUG] : Meiantech,Atlantic/Proguard : 0
[2021-06-05 12:00:41][DEBUG] : HomeEasy EU : 1
[2021-06-05 12:00:41][DEBUG] : AC : 1
[2021-06-05 12:00:41][DEBUG] : ARC : 1
[2021-06-05 12:00:41][DEBUG] : X10 : 1
[2021-06-05 12:00:41][DEBUG] : FunkBus 433.42/Itho CVE RFT : 0
[2021-06-05 12:00:41][DEBUG] : MCZ 434.50/Itho CVE ECO RFT : 0
[2021-06-05 12:00:41][DEBUG] : Honeywell Chime : 0
[2021-06-05 12:00:41][DEBUG] : HomeConfort,Fan : 0
[2021-06-05 12:00:41][DEBUG] : Keeloq : 0
11

Juste pour vous dire que depuis 5jours plus de plantages, je garde l’oeil ouvert, mais garde confiance au fait que ce soit résolu.
Merci pour votre aide !

12

Ce sujet a été automatiquement fermé après 24 heures suivant le dernier commentaire. Aucune réponse n’est permise dorénavant.