Rfxcom hs depuis Maj du 26/11/2020

Plugins Protocole domotique
22

Bonjour. J’ai le même problème RFX com HS depuis mise à jour. Les dépendances ne s’installent pas. Même manuellement elles ne parviennent pas à s’installer.
Voici les logs :
Error: importing module jeedom.jeedom
[2020-11-27 01:20:35][ERROR] : Impossible de lancer le démon RFXcom, vérifiez le log rfxcmd
[2020-11-27 01:25:02][ERROR] : Attention je pense qu’il y a un soucis avec le démon que j’ai relancé plus de 3 fois consecutivement
Error: importing module jeedom.jeedom

Merci beaucoup de votre aide car je suis complètement perdu.

23

Hello la communauté,
Juste un petit message d’information pour confirmer que le dernier update/refonte a aussi causé des dégâts chez moi.
Pour le moment je constate que je n’arrive plus a avoir le retour d’état de mes prises DIO !
=> Obligé d’afficher les deux boutons on et off pour pouvoir utiliser mes (nombreuses) prises
=> du coup je ne peux plus passer par un widget :frowning:

si jamais je trouve une parade je reviendrais poster …

bon week end !

24

Bonjour,
J’ai fait 3 mise à jour du rfxcom celle du 26/11 puis il y en avait une autre le 27 , tout fonctionnait bien. Aujourd’hui 28/11 nouvelle mise à jour cette fois HS avec message Fatal error : module ‹ serial › has no attribute ‹ VERSION ›

log debug :

[2020-11-28 18:30:03][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB0 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 6,12,18,22 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2020-11-28 18:30:04][INFO] : Start rfxcomd
[2020-11-28 18:30:04][INFO] : Log level : debug
[2020-11-28 18:30:04][INFO] : Socket port : 55000
[2020-11-28 18:30:04][INFO] : Socket host : 127.0.0.1
[2020-11-28 18:30:04][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2020-11-28 18:30:04][INFO] : Device : /dev/ttyUSB0
[2020-11-28 18:30:04][INFO] : Apikey : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
[2020-11-28 18:30:04][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2020-11-28 18:30:04][INFO] : Cycle : 0.3
[2020-11-28 18:30:04][INFO] : Serial rate : 38400
[2020-11-28 18:30:04][INFO] : Serial timeout : 9
[2020-11-28 18:30:04][INFO] : Protocol : 6,12,18,22
[2020-11-28 18:30:04][INFO] : Find device : /dev/ttyUSB0
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x1C : Edisio
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x53 : Barometric sensors 
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2020-11-28 18:30:04][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2020-11-28 18:30:04][DEBUG] : Writing PID 7753 to /tmp/jeedom/rfxcom/deamon.pid
[2020-11-28 18:30:04][DEBUG] : Init request module v2.12.4
[2020-11-28 18:30:04][DEBUG] : Starting new HTTP connection (1): 127.0.0.1
[2020-11-28 18:30:04][DEBUG] : null
[2020-11-28 18:30:04][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx HTTP/1.1" 200 0
[2020-11-28 18:30:04][ERROR] : Fatal error : module 'serial' has no attribute 'VERSION'
[2020-11-28 18:30:04][DEBUG] : Traceback (most recent call last):
  File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 394, in <module>
    shared.JEEDOM_SERIAL = jeedom_serial(device=_device,rate=_serial_rate,timeout=_serial_timeout)
  File "/var/www/html/plugins/rfxcom/resources/rfxcomd/jeedom/jeedom.py", line 231, in __init__
    logging.debug('Init serial module v%s' % (str(serial.VERSION),))
AttributeError: module 'serial' has no attribute 'VERSION'

[2020-11-28 18:30:04][DEBUG] : Shutdown
[2020-11-28 18:30:04][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2020-11-28 18:30:04][DEBUG] : Exit 0
[2020-11-28 18:30:34][ERROR] : Impossible de lancer le démon RFXcom, vérifiez le log rfxcmd
25

Pour Info, je ne sais pas si ca va aider, j’avais exactement le même problème.
J’étais en Debian Jessie jusqu’à présent avec le même problème après mise à jour du plugin. Du coup je me suis dit qu’il était temps d’upgrader et je suis passer sur Debian Buster. Et depuis le problème de démon est résolu, par contre j’ai d’autre problèmes avec le plugin :wink: Mais bon, une chose à la fois …

26

Euh question idiote c’est quoi le Debian? Ou est-ce que je peux voir cela?

27

Note: Merci à l’avenir d’utiliser les balises </> pour insérer vos logs pour une meilleurs lisibilité pour tout le monde.

1 « J'aime »
28

C’est l’une des nombreuses distributions tournant sous linux. Fait quelques recherches sur Internet, l’idée est de mettre à jour son système pour passer sur Debian Buster.

29

En gros, comme passer de win 7 a win 10

30

J’étais en STRETCH , sur tes conseils je viens de passer en BUSTER.
Après reboot , toujours le problème , relance de l’install des dépendances puis relance du deamon et maintenant OK pour rfxcom !
Merci pour ton aide
Par contre ça m’a amené d’autres pb qu’il va falloir élucider (ex analyse santé Call to undefined function curl_init() )

31

Il faut nous montrer le log des dépendances : rfx_update.
C’est valable pour tout le monde.

32

10 messages ont été scindés en un nouveau sujet : Problème RFXCOM depuis MAJ du 26/11/20

34

Déjà abordé et la solution a été postée mais bon noyer ce souci dans un autre c’est le meilleur moyen de pas avoir d’aide

2 « J'aime »
35

effectivement :solution ici.
Après j’étais pas à la recherche d’aide je sais me débrouiller, c’était juste pour apporter un autre feedback sur l’update du 26 qui à quand même eu pas mal d’effets de bord. pas forcément posté dans le bon sujet c’est certain :slight_smile:
bon dimanche

44

Bonjour,
Rfxcom planté depuis la dernière mise à jour,
Jeedom en V4 sur smart
Mise à jour plugin
lancement des dépendances
Le demon tient quelques seconde puis plante !
obligation de faire une restauration car le protocole RFXCOM est capital pour moi !
Une solution ?
Merci
Cordialement
Les logs

[2020-11-29 14:38:12][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB0 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 7,18,21,22 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey FWsBOtwLFJMpgIk4PnIfROJ6QkdKWJEAAl4v4RmJP3Anfs2k --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:38:13][INFO] : Start rfxcomd
[2020-11-29 13:38:13][INFO] : Log level : debug
[2020-11-29 13:38:13][INFO] : Socket port : 55000
[2020-11-29 13:38:13][INFO] : Socket host : 127.0.0.1
[2020-11-29 13:38:13][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:38:13][INFO] : Device : /dev/ttyUSB0
[2020-11-29 13:38:13][INFO] : Apikey : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
[2020-11-29 13:38:13][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2020-11-29 13:38:13][INFO] : Cycle : 0.3
[2020-11-29 13:38:13][INFO] : Serial rate : 38400
[2020-11-29 13:38:13][INFO] : Serial timeout : 9
[2020-11-29 13:38:13][INFO] : Protocol : 7,18,21,22
[2020-11-29 13:38:13][INFO] : Find device : /dev/ttyUSB0
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x1C : Edisio
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x53 : Barometric sensors 
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2020-11-29 13:38:13][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2020-11-29 13:38:13][DEBUG] : Writing PID 27719 to /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:38:13][DEBUG] : Init request module v2.21.0
[2020-11-29 13:38:13][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-11-29 14:38:13][DEBUG] : null
[2020-11-29 13:38:13][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx HTTP/1.1" 200 0
[2020-11-29 13:38:13][DEBUG] : Init serial module v3.5
[2020-11-29 13:38:13][DEBUG] : Start listening...
[2020-11-29 13:38:13][DEBUG] : Socket interface started
[2020-11-29 13:38:13][DEBUG] : LoopNetServer Thread started
[2020-11-29 13:38:13][DEBUG] : Open serial port on device: /dev/ttyUSB0, rate 38400, timeout : 9
[2020-11-29 13:38:13][DEBUG] : Listening on: [127.0.0.1:55000]
[2020-11-29 13:38:13][DEBUG] : Open Serialport
[2020-11-29 13:38:13][DEBUG] : flushOutput serial port 
[2020-11-29 13:38:13][DEBUG] : flushInput serial port 
[2020-11-29 13:38:13][DEBUG] : flushOutput serial port 
[2020-11-29 13:38:13][DEBUG] : flushInput serial port 
[2020-11-29 13:38:13][DEBUG] : Read Socket Thread Launched
[2020-11-29 13:38:13][DEBUG] : Read Device Thread Launched
[2020-11-29 13:38:14][DEBUG] : Send rfxcomd_reset
[2020-11-29 13:38:14][DEBUG] : Write data to serial port : 0d00000000000000000000000000
[2020-11-29 13:38:14][DEBUG] : Sleep 1 sec
[2020-11-29 13:38:15][DEBUG] : flushInput serial port 
[2020-11-29 13:38:15][DEBUG] : Send get status test
[2020-11-29 13:38:15][DEBUG] : Write data to serial port : 0d00000102000000000000000000
[2020-11-29 13:38:15][DEBUG] : Message: 0d0100010253f30100260001031c
[2020-11-29 13:38:15][DEBUG] : Decode : 0d0100010253f30100260001031c
[2020-11-29 13:38:15][DEBUG] : Test message: 0d0100010253f30100260001031c
[2020-11-29 13:38:15][DEBUG] : PacketType: 0x01
[2020-11-29 13:38:15][DEBUG] : Length: 14
[2020-11-29 13:38:15][DEBUG] : Start decoding packet type 0x01
[2020-11-29 13:38:15][ERROR] : Error: unrecognizable packet (0d0100010253f30100260001031c) : index out of range
[2020-11-29 13:38:15][DEBUG] : Traceback (most recent call last):
  File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 163, in read_rfxcom
    decodePacket(message)
  File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 48, in decodePacket
    infos = sys.modules['RfxPacket.'+str(packetType)].parse(message);
  File "/var/www/html/plugins/rfxcom/resources/rfxcomd/RfxPacket/0x01.py", line 56, in parse
    'msg10' : jeedom_utils.dec2hex(message[14]),
IndexError: index out of range

[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56935]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"E1"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56935]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56936]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"E12"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56936]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56937]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"E16"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56937]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56938]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"E2"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56938]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56939]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"E3"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56939]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56940]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"E4"}}'
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56940]
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'E1'}
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56941]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"E6"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56941]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56942]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"008FF43B"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56942]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56943]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"13E50A0A"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56943]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56944]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"09D57C14"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56944]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56945]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"7D01"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56945]
[2020-11-29 13:38:16][DEBUG] : Client connected to [127.0.0.1:56946]
[2020-11-29 13:38:16][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"FE02"}}'
[2020-11-29 13:38:16][DEBUG] : Client disconnected from [127.0.0.1:56946]
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'E12'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'E16'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'E2'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'E3'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'E4'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'E6'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': '008FF43B'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': '13E50A0A'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': '09D57C14'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': '7D01'}
[2020-11-29 13:38:16][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:16][DEBUG] : Add device : {'id': 'FE02'}
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56947]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"511CF18E"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56947]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56952]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"4D742CDE"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56952]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56953]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"4D742CDE"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56953]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56954]
[2020-11-29 14:38:17][INFO] : Démon RFXcom lancé
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"7EA6A19A"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56954]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56955]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"2C137A22"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56955]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56956]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"4D742CDE"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56956]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56957]
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '511CF18E'}
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"4D742CDE"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56957]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56958]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"3329755C"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56958]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56959]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"4D742CDE"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56959]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56960]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"014980E2"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56960]
[2020-11-29 13:38:17][DEBUG] : Client connected to [127.0.0.1:56961]
[2020-11-29 13:38:17][DEBUG] : Message read from socket: b'{"apikey":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","cmd":"add","device":{"id":"156D"}}'
[2020-11-29 13:38:17][DEBUG] : Client disconnected from [127.0.0.1:56961]
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '4D742CDE'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '4D742CDE'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '7EA6A19A'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '2C137A22'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '4D742CDE'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '4D742CDE'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '3329755C'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '4D742CDE'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '014980E2'}
[2020-11-29 13:38:17][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-11-29 13:38:17][DEBUG] : Add device : {'id': '156D'}
[2020-11-29 13:38:29][DEBUG] : Message: 0a5202007d01008b400069
[2020-11-29 13:38:29][DEBUG] : Decode : 0a5202007d01008b400069
[2020-11-29 13:38:29][DEBUG] : Test message: 0a5202007d01008b400069
[2020-11-29 13:38:29][DEBUG] : PacketType: 0x52
[2020-11-29 13:38:29][DEBUG] : Length: 11
[2020-11-29 13:38:29][DEBUG] : Start decoding packet type 0x52
[2020-11-29 13:38:29][DEBUG] : Subtype = TH2 is THGR810, THGN800, THGN801
[2020-11-29 13:38:29][DEBUG] : Data : {'humidity': 64, 'id1': '0x7D', 'humidity_status': 0, 'seqnbr': '0x00', 'temperature': 139, 'packetlen': '0x0A', 'packettype': '0x52', 'battery': 100, 'rssi': 6, 'subtype': '0x02', 'id2': '0x01', 'temperaturesign': ''}
[2020-11-29 13:38:29][DEBUG] : Decoded info : {'battery': 100, 'humidity': 64, 'id': '7D01', 'rssi': 6, 'humidity_status': 0, 'subtype': '0x02', 'temperature': '13.9', 'packettype': '0x52'}
[2020-11-29 13:38:29][DEBUG] : Device is known id : 7D01
[2020-11-29 13:38:29][DEBUG] : Send to jeedom : {'devices': {'7D0152': {'battery': 100, 'humidity': 64, 'id': '7D01', 'rssi': 6, 'humidity_status': 0, 'subtype': '0x02', 'temperature': '13.9', 'packettype': '0x52'}}}
[2020-11-29 13:38:29][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-11-29 14:38:29][DEBUG] : {"devices":{"7D0152":{"battery":100,"humidity":64,"id":"7D01","rssi":6,"humidity_status":0,"subtype":"0x02","temperature":"13.9","packettype":"0x52"}}}
[2020-11-29 13:38:29][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx HTTP/1.1" 200 0
[2020-11-29 13:38:41][ERROR] : Timeout waiting status 
[2020-11-29 13:38:41][DEBUG] : Shutdown
[2020-11-29 13:38:41][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:38:42][DEBUG] : LoopNetServer Thread stopped
[2020-11-29 13:38:42][DEBUG] : Close serial port
[2020-11-29 13:38:42][DEBUG] : Serial port closed
[2020-11-29 13:38:42][DEBUG] : Exit 0
45

Hello,
Moi aussi je me suis fait avoir en installant la nouvelle version de RFXcom sur mon stretch. Je viens de ré-installer totalement l’OS pour le passer sur buster. Puis, j’ai recouché mon backup.
Malheureusement, le problème de démon qui s’arrête au bout de quelques secondes reste d’actualité chez moi. Que ce soit avec la version 4.1 stable ou la version beta.

Version de l’application: 2020-11-29 14:30:39

Coté dépendances, tout semble OK :

********************************************************
*             Installation des dépendances             *
********************************************************
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 http://phoscon.de/apt/deconz buster InRelease
Hit:4 https://deb.nodesource.com/node_12.x buster InRelease
Reading package lists...
Skipping serial as it is not installed.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Reading package lists...
Building dependency tree...
Reading state information...
Package 'python3-serial' is not installed, so not removed
The following package was automatically installed and is no longer required:
raspi-gpio
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
python3 is already the newest version (3.7.3-1).
python3-pyudev is already the newest version (0.21.0-1).
python3-requests is already the newest version (2.21.0-1).
python3-pip is already the newest version (18.1-5+rpt1).
The following package was automatically installed and is no longer required:
raspi-gpio
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already up-to-date: pyserial in /usr/local/lib/python3.7/dist-packages (3.5)
********************************************************
*             Installation terminée                    *
********************************************************```

Coté Démon, c’est moins le cas. Je retrouve le meme type de problème que d’autres :

[2020-11-29 14:45:43][ERROR] : Impossible de lancer le démon RFXcom, vérifiez le log rfxcmd
[2020-11-29 14:50:09][ERROR] : Attention je pense qu’il y a un soucis avec le démon que j’ai relancé plus de 3 fois consécutivement
[2020-11-29 14:50:11][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB0 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 12,13,18,20,21,22,23 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey K17Cq0b9NERSO2rvOVLSWafrTAK86L6R --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:50:13][INFO] : Start rfxcomd
[2020-11-29 13:50:13][INFO] : Log level : debug
[2020-11-29 13:50:13][INFO] : Socket port : 55000
[2020-11-29 13:50:13][INFO] : Socket host : 127.0.0.1
[2020-11-29 13:50:13][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:50:13][INFO] : Device : /dev/ttyUSB0
[2020-11-29 13:50:13][INFO] : Apikey : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
[2020-11-29 13:50:13][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2020-11-29 13:50:13][INFO] : Cycle : 0.3
[2020-11-29 13:50:13][INFO] : Serial rate : 38400
[2020-11-29 13:50:13][INFO] : Serial timeout : 9
[2020-11-29 13:50:13][INFO] : Protocol : 12,13,18,20,21,22,23
[2020-11-29 13:50:13][INFO] : Find device : /dev/ttyUSB0
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x1C : Edisio
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2020-11-29 13:50:13][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2020-11-29 13:50:13][DEBUG] : Writing PID 17275 to /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:50:13][DEBUG] : Init request module v2.21.0
[2020-11-29 13:50:13][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-11-29 14:50:13][DEBUG] : null
[2020-11-29 13:50:13][DEBUG] : http://127.0.0.1:80 « GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx HTTP/1.1 » 200 0
[2020-11-29 13:50:13][ERROR] : Fatal error : module ‹ serial › has no attribute ‹ VERSION ›
[2020-11-29 13:50:13][DEBUG] : Traceback (most recent call last):
File « /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py », line 394, in 
shared.JEEDOM_SERIAL = jeedom_serial(device=_device,rate=_serial_rate,timeout=_serial_timeout)
File « /var/www/html/plugins/rfxcom/resources/rfxcomd/jeedom/jeedom.py », line 231, in init
logging.debug(‹ Init serial module v%s › % (str(serial.VERSION),))
AttributeError: module ‹ serial › has no attribute ‹ VERSION ›
[2020-11-29 13:50:13][DEBUG] : Shutdown
[2020-11-29 13:50:13][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2020-11-29 13:50:13][DEBUG] : Exit 0

Je reste à l’écoute et tout ouïe ce dimanche… :wink:
Merci à tous, Bon courage…

46

Bonjour,

Comme pour toute demande un peu plus d’infos complémentaire serait utile!

Quel type de matériel, version d’OS ?
Sans cela tu risque de ne pas avoir beaucoup d’aide.

47

Bien entendu,
Concernant l’OS :

RETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Concernant le hardware : Rpi PI3B
Concernant Jeedom : v4.0.61
Concernant ma gateway USB RFX : RFXtrx433E batch 4215

Bien à toi

48

je me fais une réponse.
il est indispensable de mettre à jour son RFXCOM.
Mes problèmes sont presque tous réglés.
encore une sonde à récupérer.
Merci

49

JP, tu as ces logs là aussi / débug du log rfxcom ? :

50

JMP, peux tu fournir les infos de hardwares + software de ton environnement? La version « stable » ou « beta » de RFXcom que tu utilise?
Je suis encore en train de réinstaller les dépendances et de relancer le démon sans succès… Je cherche à comprendre.
merci à toi,