Le principe pour un bon fonctionnement de community est :
la sur les 2 fils on est déjà complètement à coté de la plaque !
Donc non pas de nouveau fil à rallonge !
Bonjour
Non non pas d’erreur c’est bien une heiman… De toute façon Schneider n’ayant même pas pris la peine de demander à heiman de renommer dans le firmware je peux pas différencier la heiman de Schneider
Merci. C’est vrai qu’elles se ressemblent comme deux gouttes d’eau
Nouvel équipement : Volets roulants module Schneider Electric Wiser CCT5015-0002W
Log
{
"ieee": "00:0d:6f:ff:fe:cb:52:11",
"nwk": 31119,
"status": 2,
"lqi": "231",
"rssi": "-65",
"last_seen": "1617382106.1621628",
"node_descriptor": "01:40:8e:5e:10:52:52:00:00:2c:52:00:00",
"endpoints": [
{
"id": 5,
"status": 1,
"device_type": 514,
"profile_id": 260,
"manufacturer": "Schneider Electric",
"model": "PUCK\/SHUTTER\/1",
"output_clusters": [
{
"id": 25,
"name": "Ota",
"attributes": []
}
],
"input_clusters": [
{
"id": 0,
"name": "Basic",
"attributes": [
{
"id": 0,
"name": "zcl_version",
"value": 3
},
{
"id": 1,
"name": "app_version",
"value": 2
},
{
"id": 2,
"name": "stack_version",
"value": 6
},
{
"id": 3,
"name": "hw_version",
"value": 1
},
{
"id": 4,
"name": "manufacturer",
"value": "Schneider Electric"
},
{
"id": 5,
"name": "model",
"value": "PUCK\/SHUTTER\/1"
},
{
"id": 6,
"name": "date_code",
"value": ""
},
{
"id": 7,
"name": "power_source",
"value": 1
},
{
"id": 16384,
"name": "sw_build_id",
"value": "002.004.018 R"
}
]
},
{
"id": 3,
"name": "Identify",
"attributes": []
},
{
"id": 4,
"name": "Groups",
"attributes": []
},
{
"id": 5,
"name": "Scenes",
"attributes": []
},
{
"id": 258,
"name": "Window Covering",
"attributes": []
},
{
"id": 2821,
"name": "Diagnostic",
"attributes": []
}
]
},
{
"id": 242,
"status": 1,
"device_type": 97,
"profile_id": 41440,
"manufacturer": null,
"model": null,
"output_clusters": [
{
"id": 33,
"name": "GreenPowerProxy",
"attributes": []
}
],
"input_clusters": []
}
],
"signature": {
"manufacturer": "Schneider Electric",
"model": "PUCK\/SHUTTER\/1",
"node_desc": {
"byte1": 1,
"byte2": 64,
"mac_capability_flags": 142,
"manufacturer_code": 4190,
"maximum_buffer_size": 82,
"maximum_incoming_transfer_size": 82,
"server_mask": 11264,
"maximum_outgoing_transfer_size": 82,
"descriptor_capability_field": 0
},
"endpoints": {
"5": {
"profile_id": 260,
"device_type": 514,
"input_clusters": [
0,
3,
4,
5,
258,
2821
],
"output_clusters": [
25
]
},
"242": {
"profile_id": 41440,
"device_type": 97,
"input_clusters": [],
"output_clusters": [
33
]
}
}
},
"class": "zigpy.device"
}
Equipement reconnu mais pas avec exactement la même référence : lumières dimmable module Schneider Electric Wiser CCT5010-0002W
Log
{
"ieee": "90:fd:9f:ff:fe:7f:a3:70",
"nwk": 26895,
"status": 2,
"lqi": "239",
"rssi": "-64",
"last_seen": "1617383914.5459597",
"node_descriptor": "01:40:8e:5e:10:52:52:00:00:2c:52:00:00",
"endpoints": [
{
"id": 3,
"status": 1,
"device_type": 257,
"profile_id": 260,
"manufacturer": "Schneider Electric",
"model": "PUCK\/DIMMER\/1",
"output_clusters": [
{
"id": 25,
"name": "Ota",
"attributes": []
}
],
"input_clusters": [
{
"id": 0,
"name": "Basic",
"attributes": [
{
"id": 0,
"name": "zcl_version",
"value": 3
},
{
"id": 1,
"name": "app_version",
"value": 2
},
{
"id": 2,
"name": "stack_version",
"value": 6
},
{
"id": 3,
"name": "hw_version",
"value": 1
},
{
"id": 4,
"name": "manufacturer",
"value": "Schneider Electric"
},
{
"id": 5,
"name": "model",
"value": "PUCK\/DIMMER\/1"
},
{
"id": 6,
"name": "date_code",
"value": ""
},
{
"id": 7,
"name": "power_source",
"value": 1
},
{
"id": 16384,
"name": "sw_build_id",
"value": "002.004.018 R"
}
]
},
{
"id": 3,
"name": "Identify",
"attributes": []
},
{
"id": 4,
"name": "Groups",
"attributes": []
},
{
"id": 5,
"name": "Scenes",
"attributes": []
},
{
"id": 6,
"name": "On\/Off",
"attributes": [
{
"id": 0,
"name": "on_off",
"value": 0
}
]
},
{
"id": 8,
"name": "Level control",
"attributes": [
{
"id": 0,
"name": "current_level",
"value": 254
}
]
},
{
"id": 769,
"name": "Ballast",
"attributes": []
},
{
"id": 2821,
"name": "Diagnostic",
"attributes": []
}
]
},
{
"id": 242,
"status": 1,
"device_type": 97,
"profile_id": 41440,
"manufacturer": null,
"model": null,
"output_clusters": [
{
"id": 33,
"name": "GreenPowerProxy",
"attributes": []
}
],
"input_clusters": []
}
],
"signature": {
"manufacturer": "Schneider Electric",
"model": "PUCK\/DIMMER\/1",
"node_desc": {
"byte1": 1,
"byte2": 64,
"mac_capability_flags": 142,
"manufacturer_code": 4190,
"maximum_buffer_size": 82,
"maximum_incoming_transfer_size": 82,
"server_mask": 11264,
"maximum_outgoing_transfer_size": 82,
"descriptor_capability_field": 0
},
"endpoints": {
"3": {
"profile_id": 260,
"device_type": 257,
"input_clusters": [
0,
3,
4,
5,
6,
8,
769,
2821
],
"output_clusters": [
25
]
},
"242": {
"profile_id": 41440,
"device_type": 97,
"input_clusters": [],
"output_clusters": [
33
]
}
}
},
"class": "zigpy.device"
}
Nouvel équipement non reconnu : module Switch Schneider Electric Wiser CCT5011-0002W
Log
{
"ieee": "00:0d:6f:ff:fe:8f:c8:b1",
"nwk": 59911,
"status": 2,
"lqi": "167",
"rssi": "-73",
"last_seen": "1617385752.2766984",
"node_descriptor": "01:40:8e:5e:10:52:52:00:00:2c:52:00:00",
"endpoints": [
{
"id": 1,
"status": 1,
"device_type": 256,
"profile_id": 260,
"manufacturer": "Schneider Electric",
"model": "PUCK\/SWITCH\/1",
"output_clusters": [
{
"id": 25,
"name": "Ota",
"attributes": []
}
],
"input_clusters": [
{
"id": 0,
"name": "Basic",
"attributes": [
{
"id": 0,
"name": "zcl_version",
"value": 3
},
{
"id": 1,
"name": "app_version",
"value": 2
},
{
"id": 2,
"name": "stack_version",
"value": 6
},
{
"id": 3,
"name": "hw_version",
"value": 1
},
{
"id": 4,
"name": "manufacturer",
"value": "Schneider Electric"
},
{
"id": 5,
"name": "model",
"value": "PUCK\/SWITCH\/1"
},
{
"id": 6,
"name": "date_code",
"value": ""
},
{
"id": 7,
"name": "power_source",
"value": 1
},
{
"id": 16384,
"name": "sw_build_id",
"value": "002.004.018 R"
}
]
},
{
"id": 3,
"name": "Identify",
"attributes": []
},
{
"id": 4,
"name": "Groups",
"attributes": []
},
{
"id": 5,
"name": "Scenes",
"attributes": []
},
{
"id": 6,
"name": "On\/Off",
"attributes": []
},
{
"id": 2821,
"name": "Diagnostic",
"attributes": []
}
]
},
{
"id": 242,
"status": 1,
"device_type": 97,
"profile_id": 41440,
"manufacturer": null,
"model": null,
"output_clusters": [
{
"id": 33,
"name": "GreenPowerProxy",
"attributes": []
}
],
"input_clusters": []
}
],
"signature": {
"manufacturer": "Schneider Electric",
"model": "PUCK\/SWITCH\/1",
"node_desc": {
"byte1": 1,
"byte2": 64,
"mac_capability_flags": 142,
"manufacturer_code": 4190,
"maximum_buffer_size": 82,
"maximum_incoming_transfer_size": 82,
"server_mask": 11264,
"maximum_outgoing_transfer_size": 82,
"descriptor_capability_field": 0
},
"endpoints": {
"1": {
"profile_id": 260,
"device_type": 256,
"input_clusters": [
0,
3,
4,
5,
6,
2821
],
"output_clusters": [
25
]
},
"242": {
"profile_id": 41440,
"device_type": 97,
"input_clusters": [],
"output_clusters": [
33
]
}
}
},
"class": "zigpy.device"
}
Thermostat schneider modèle CCTFR6400 reconnu mais l’humidité ne remonte pas en valeur
voici les logs
{
"ieee": "68:0a:e2:ff:fe:f0:3d:ec",
"nwk": 4006,
"status": 2,
"lqi": "255",
"rssi": "-61",
"last_seen": "1617387095.1353316",
"node_descriptor": "02:40:80:5e:10:52:52:00:00:00:52:00:00",
"endpoints": [
{
"id": 1,
"status": 1,
"device_type": 770,
"profile_id": 260,
"manufacturer": "Schneider Electric",
"model": "Thermostat",
"output_clusters": [
{
"id": 0,
"name": "Basic",
"attributes": []
},
{
"id": 25,
"name": "Ota",
"attributes": []
},
{
"id": 513,
"name": "Thermostat",
"attributes": []
}
],
"input_clusters": [
{
"id": 0,
"name": "Basic",
"attributes": [
{
"id": 0,
"name": "zcl_version",
"value": 2
},
{
"id": 1,
"name": "app_version",
"value": 0
},
{
"id": 3,
"name": "hw_version",
"value": 1
},
{
"id": 4,
"name": "manufacturer",
"value": "Schneider Electric"
},
{
"id": 5,
"name": "model",
"value": "Thermostat"
},
{
"id": 7,
"name": "power_source",
"value": 3
},
{
"id": 16384,
"name": "sw_build_id",
"value": "bc271cf"
}
]
},
{
"id": 1,
"name": "Power Configuration",
"attributes": []
},
{
"id": 3,
"name": "Identify",
"attributes": []
},
{
"id": 32,
"name": "Poll Control",
"attributes": [
{
"id": 0,
"name": "checkin_interval",
"value": 14400
}
]
},
{
"id": 516,
"name": "Thermostat User Interface Configuration",
"attributes": []
},
{
"id": 1026,
"name": "Temperature Measurement",
"attributes": [
{
"id": 0,
"name": "measured_value",
"value": 2628
}
]
},
{
"id": 1029,
"name": "Relative Humidity Measurement",
"attributes": [
{
"id": 0,
"name": "measured_value",
"value": 3780
}
]
},
{
"id": 2821,
"name": "Diagnostic",
"attributes": [
{
"id": 284,
"name": "last_message_lqi",
"value": 208
},
{
"id": 285,
"name": "last_message_rssi",
"value": -48
}
]
},
{
"id": 65027,
"name": "Manufacturer Specific",
"attributes": []
}
]
}
],
"signature": {
"manufacturer": "Schneider Electric",
"model": "Thermostat",
"node_desc": {
"byte1": 2,
"byte2": 64,
"mac_capability_flags": 128,
"manufacturer_code": 4190,
"maximum_buffer_size": 82,
"maximum_incoming_transfer_size": 82,
"server_mask": 0,
"maximum_outgoing_transfer_size": 82,
"descriptor_capability_field": 0
},
"endpoints": {
"1": {
"profile_id": 260,
"device_type": 770,
"input_clusters": [
0,
1,
3,
32,
516,
1026,
1029,
2821,
65027
],
"output_clusters": [
0,
25,
513
]
}
}
},
"class": "zigpy.device"
}
En modifiant la valeur du LogicalID en 1::1029::0 j’ai bien le retour de la valeur
Merci pour tout çà fonctionne nikel 
Bonjour,
Ca sera disponible dans la beta de demain
Bonjour,
Pour le thermostat ca sera corrigé demain (c’est bien le 38:: qu’il faut passer en 1:: )
Pour CCT5010-0002 W je peux rien y faire il n’y a pas de distinction sur le module lui même entre la version 1 et la version 2…
Bonsoir
Ce plugin est il une alternative au plugin Deconz ?
6€ et il n’y a pas d’accès à une documentation
Oui
Il deviendra le plugin officiel à mon sens.
Ce plugin n’utilise pas d’autre surcouches comme PHOSCON/DECONZ
Mais encore en beta à ce jour
Bonjour,
Comme toujours un plugin en beta n’a jamais de documentation public pour eviter d’avoir trop de monde qui l’utilise.
Bonsoir, je viens de tester la configuration suivante
Rien ne fonctionne avec ce profil et la commande rgb n’est pas crée, ça marche a peut prêt avec le profil de l’e27 mais l’état remonte anormalement lentement.
Qu’en pensez vous ? merci d’avance
Il faut mettre des log correspondant a l’inclusion et les données brut !
C’est officiel va voir sur le market !
Bravo pour le taf:)
J’avais pas vu la version Stable. génial 
Bravo à Loic, aux Dev et Beta-Testeurs 
Mais alors cela c’est fait subitement car y a quelques jours cela ne semblait pas à l’ordre du jour…
J’ai encore les traces d’un tacle reçu la veille du 1er avril 
Nous allons donc en profiter pour revenir à un fonctionnement normal du forum
a savoir :
Le principe pour un bon fonctionnement de community est :
Merci d’ouvrir de nouveau sujets !
