Bonjour,
Je me permets de vous solliciter car après de multiples recherches sur les forums, je n’arrive toujours pas à résoudre mon problème.
J’ai installé le plugin Enocean, avec sa clé USB, Jeedom l’a reconnait bien.
Par contre, les dépendances et Démon sont sur NOK, à priori c’est un souci de version pyhton, mais je n’arrive pas à trouver la commande. Voici une capture d’écran de mes logs :
Merci d’avance pour votre aide !
Salut
Merci de faire un copié collé des logs, en utilisant la balise code pour que le rendu soit propre. Des copies d’écran c’est pas top lisible.
Pages santé de jeedom et du plugin.?
Antoine
Bonjour,
Tu es en debian 11 bullseye ?
akenad 
Salut Akenad,
Je suis en debian jessie !
Salut Tonio,
log Concernant le Plugin :
[2021-12-09 21:15:07][INFO] : Successfully loaded 95 profiles !
[2021-12-09 21:15:07][DEBUG] : Writing PID 17106 to /tmp/jeedom/openenocean/deamon.pid
[2021-12-09 21:15:07][DEBUG] : Init request module v2.4.3
[2021-12-09 21:15:07][INFO] : Starting new HTTP connection (1): 127.0.0.1
[2021-12-09 21:15:07][ERROR] : Callback result as a unknown error: (‹ Connection aborted. ›, error(111, ‹ Connection refused ›)). Please check your network configuration page
[2021-12-09 21:15:07][ERROR] : Network communication issues. Please fixe your Jeedom network configuration.
[2021-12-09 21:15:07][DEBUG] : Shutdown
[2021-12-09 21:15:07][DEBUG] : Removing PID file /tmp/jeedom/openenocean/deamon.pid
[2021-12-09 21:15:07][DEBUG] : Exit 0
[2021-12-09 22:15:35][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 22:16:20][DEBUG] : Lancement de : /var/www/html/core/class/…/…/core/php/jeePlugin.php plugin_id=openenocean function=remove callInstallFunction=1
[2021-12-09 22:17:24][INFO] : Début d’activation du plugin
[2021-12-09 22:17:25][INFO] : Info sur le démon : Array ( [launchable_message] => [launchable] => nok [state] => nok [log] => nok [auto] => 0 )
[2021-12-09 22:17:25][DEBUG] : Lancement de : /var/www/html/core/class/…/…/core/php/jeePlugin.php plugin_id=openenocean function=install callInstallFunction=1
[2021-12-09 21:17:46][ERROR] : Callback result as a unknown error: (‹ Connection aborted. ›, error(111, ‹ Connection refused ›)). Please check your network configuration page
[2021-12-09 21:17:46][ERROR] : Network communication issues. Please fixe your Jeedom network configuration.
[2021-12-09 22:18:14][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 22:18:23][ERROR] : Erreur sur la fonction deamon_start du plugin : Vous devez attendre au moins 45 secondes entre deux lancements du démon. Dernier lancement : 2021-12-09 22:17:42
[2021-12-09 21:18:49][ERROR] : Callback result as a unknown error: (‹ Connection aborted. ›, error(111, ‹ Connection refused ›)). Please check your network configuration page
[2021-12-09 21:18:49][ERROR] : Network communication issues. Please fixe your Jeedom network configuration.
[2021-12-09 22:19:17][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 21:20:07][ERROR] : Callback result as a unknown error: (‹ Connection aborted. ›, error(111, ‹ Connection refused ›)). Please check your network configuration page
[2021-12-09 21:20:07][ERROR] : Network communication issues. Please fixe your Jeedom network configuration.
[2021-12-09 22:20:34][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 21:25:50][ERROR] : Callback result as a unknown error: (‹ Connection aborted. ›, error(111, ‹ Connection refused ›)). Please check your network configuration page
[2021-12-09 21:25:50][ERROR] : Network communication issues. Please fixe your Jeedom network configuration.
[2021-12-09 22:26:17][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 21:28:58][ERROR] : Callback result as a unknown error: (‹ Connection aborted. ›, error(111, ‹ Connection refused ›)). Please check your network configuration page
[2021-12-09 21:28:58][ERROR] : Network communication issues. Please fixe your Jeedom network configuration.
[2021-12-09 22:29:26][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 21:30:07][ERROR] : Callback result as a unknown error: (‹ Connection aborted. ›, error(111, ‹ Connection refused ›)). Please check your network configuration page
[2021-12-09 21:30:07][ERROR] : Network communication issues. Please fixe your Jeedom network configuration.
[2021-12-09 22:30:35][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
sudo: /usr/bin/python: command not found
[2021-12-09 22:35:34][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
sudo: /usr/bin/python: command not found
[2021-12-09 22:40:35][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 22:45:02][ERROR] : Attention je pense qu’il y a un soucis avec le démon que j’ai relancé plus de 3 fois consecutivement
sudo: /usr/bin/python: command not found
[2021-12-09 22:45:34][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
[2021-12-09 22:47:35][ERROR] : Attention je pense qu’il y a un soucis avec le démon que j’ai relancé plus de 3 fois consecutivement
sudo: /usr/bin/python: command not found
[2021-12-09 22:50:02][ERROR] : Attention je pense qu’il y a un soucis avec le démon que j’ai relancé plus de 3 fois consecutivement
sudo: /usr/bin/python: command not found
[2021-12-09 22:50:34][ERROR] : Impossible de lancer le démon openenocean, vérifiez le port
Log concernant le UPDATE :
Reading package lists...
Building dependency tree...
Reading state information...
Package 'python-enum' is not installed, so not removed
The following packages were automatically installed and are no longer required:
gir1.2-glib-2.0 iso-codes libdbus-glib-1-2 libgirepository-1.0-1 libmpdec2
libpython3-stdlib libpython3.4-minimal libpython3.4-stdlib lsb-release
python-apt-common python3-minimal python3.4 python3.4-minimal
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 126 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up python-bs4 (4.3.2-2) ...
/var/lib/dpkg/info/python-bs4.postinst: 6: /var/lib/dpkg/info/python-bs4.postinst: pycompile: not found
dpkg: error processing package python-bs4 (--configure):
subprocess installed post-installation script returned error exit status 127
Errors were encountered while processing:
python-bs4
E: Sub-process /usr/bin/dpkg returned an error code (1)
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
python-dev is already the newest version.
The following packages were automatically installed and are no longer required:
gir1.2-glib-2.0 iso-codes libdbus-glib-1-2 libgirepository-1.0-1 libmpdec2
libpython3-stdlib libpython3.4-minimal libpython3.4-stdlib lsb-release
python-apt-common python3-minimal python3.4 python3.4-minimal
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
python-urllib3
Suggested packages:
python-gobject python-qt4 python-pyside.qtcore python-ndg-httpsclient
python-openssl python-pyasn1 python-socks python-wxgtk3.0 python-wxgtk
python-ntlm
The following packages will be upgraded:
python-pyudev python-requests python-serial python-urllib3
4 upgraded, 0 newly installed, 0 to remove and 122 not upgraded.
1 not fully installed or removed.
Need to get 266 kB of archives.
After this operation, 71.7 kB disk space will be freed.
WARNING: The following packages cannot be authenticated!
python-pyudev python-urllib3 python-requests python-serial
E: There are problems and -y was used without --force-yes
sudo: unable to execute /usr/bin/pip: No such file or directory
sudo: unable to execute /usr/bin/pip: No such file or directory
sudo: unable to execute /usr/bin/pip: No such file or directory
WARNING: apt does not have a stable CLI interface yet. Use with caution in scripts.
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
gir1.2-glib-2.0 iso-codes libdbus-glib-1-2 libgirepository-1.0-1 libmpdec2
libpython3-stdlib libpython3.4-minimal libpython3.4-stdlib lsb-release
python-apt-common python3-minimal python3.4 python3.4-minimal
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
python-bs4*
0 upgraded, 0 newly installed, 1 to remove and 126 not upgraded.
1 not fully installed or removed.
After this operation, 348 kB disk space will be freed.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 48276 files and directories currently installed.)
Removing python-bs4 (4.3.2-2) ...
/var/lib/dpkg/info/python-bs4.prerm: 6: /var/lib/dpkg/info/python-bs4.prerm: pyclean: not found
dpkg: error processing package python-bs4 (--purge):
subprocess installed pre-removal script returned error exit status 127
/var/lib/dpkg/info/python-bs4.postinst: 6: /var/lib/dpkg/info/python-bs4.postinst: pycompile: not found
dpkg: error while cleaning up:
subprocess installed post-installation script returned error exit status 127
Errors were encountered while processing:
python-bs4
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo: unable to execute /usr/bin/pip: No such file or directory
********************************************************
* Installation terminée *
********************************************************
bonjour,
Merci de modifier votre message en utilisant le code </> pour encadrer vos codes ou logs.
tutoriel cliquez ici
Ou vous pouvez envoyer un message privé à @sheldon-bot démarrer tutoriel avancé pour apprendre à utiliser les menus 
C’est pas buster minimum demande pour ce plugin ?