Voici les logs
[2021-01-22 18:10:10][DEBUG] : Signal 15 caught, exiting...
[2021-01-22 18:10:10][DEBUG] : Shutdown
[2021-01-22 18:10:10][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2021-01-22 18:10:10][DEBUG] : LoopNetServer Thread stopped
[2021-01-22 18:10:10][DEBUG] : Close serial port
[2021-01-22 18:10:10][ERROR] : Error in read_rfxcom: [Errno 9] Bad file descriptor
[2021-01-22 18:10:10][DEBUG] : Serial port closed
[2021-01-22 18:10:10][DEBUG] : Exit 0
[2021-01-22 18:11:11][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB2 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 12,13,18,20,21,22,23 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey MVwXZJQ3Gj2cv3683i1pwGArkYah0jIE --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2021-01-22 18:11:11][INFO] : Start rfxcomd
[2021-01-22 18:11:11][INFO] : Log level : debug
[2021-01-22 18:11:11][INFO] : Socket port : 55000
[2021-01-22 18:11:11][INFO] : Socket host : 127.0.0.1
[2021-01-22 18:11:11][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2021-01-22 18:11:11][INFO] : Device : /dev/ttyUSB2
[2021-01-22 18:11:11][INFO] : Apikey : MVwXZJQ3Gj2cv3683i1pwGArkYah0jIE
[2021-01-22 18:11:11][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2021-01-22 18:11:11][INFO] : Cycle : 0.3
[2021-01-22 18:11:11][INFO] : Serial rate : 38400
[2021-01-22 18:11:11][INFO] : Serial timeout : 9
[2021-01-22 18:11:11][INFO] : Protocol : 12,13,18,20,21,22,23
[2021-01-22 18:11:11][INFO] : Find device : /dev/ttyUSB2
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x02 : Receiver/Transmitter Message
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x1C : Edisio
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2021-01-22 18:11:11][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2021-01-22 18:11:11][DEBUG] : Writing PID 25773 to /tmp/jeedom/rfxcom/deamon.pid
[2021-01-22 18:11:11][DEBUG] : Init request module v2.21.0
[2021-01-22 18:11:11][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2021-01-22 18:11:12][DEBUG] : null
[2021-01-22 18:11:12][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=MVwXZJQ3Gj2cv3683i1pwGArkYah0jIE HTTP/1.1" 200 0
[2021-01-22 18:11:12][DEBUG] : Init serial module v3.5
[2021-01-22 18:11:12][DEBUG] : Start listening...
[2021-01-22 18:11:12][DEBUG] : Socket interface started
[2021-01-22 18:11:12][DEBUG] : LoopNetServer Thread started
[2021-01-22 18:11:12][DEBUG] : Open serial port on device: /dev/ttyUSB2, rate 38400, timeout : 9
[2021-01-22 18:11:12][DEBUG] : Open Serialport
[2021-01-22 18:11:12][DEBUG] : Listening on: [127.0.0.1:55000]
[2021-01-22 18:11:12][DEBUG] : flushOutput serial port
[2021-01-22 18:11:12][DEBUG] : flushInput serial port
[2021-01-22 18:11:12][DEBUG] : flushOutput serial port
[2021-01-22 18:11:12][DEBUG] : flushInput serial port
[2021-01-22 18:11:12][DEBUG] : Read Socket Thread Launched
[2021-01-22 18:11:12][DEBUG] : Read Device Thread Launched
[2021-01-22 18:11:13][DEBUG] : Send rfxcomd_reset
[2021-01-22 18:11:13][DEBUG] : Write data to serial port : 0d00000000000000000000000000
[2021-01-22 18:11:13][DEBUG] : Sleep 1 sec
[2021-01-22 18:11:14][DEBUG] : flushInput serial port
[2021-01-22 18:11:14][DEBUG] : Send get status test
[2021-01-22 18:11:14][DEBUG] : Write data to serial port : 0d00000102000000000000000000
[2021-01-22 18:11:14][DEBUG] : Message: 14010001025321000c2f000103ff05630000000000
[2021-01-22 18:11:14][DEBUG] : Decode : 14010001025321000c2f000103ff05630000000000
[2021-01-22 18:11:14][DEBUG] : Test message: 14010001025321000c2f000103ff05630000000000
[2021-01-22 18:11:14][DEBUG] : PacketType: 0x01
[2021-01-22 18:11:14][DEBUG] : Length: 21
[2021-01-22 18:11:14][DEBUG] : Start decoding packet type 0x01
[2021-01-22 18:11:14][DEBUG] : Data : {'packetlen': '0x14', 'packettype': '0x01', 'subtype': '0x00', 'seqnbr': '0x01', 'cmnd': '0x02', 'msg1': '0x53', 'msg2': '0x21', 'msg3': '0x00', 'msg4': '0x0C', 'msg5': '0x2F', 'msg6': '0x00', 'msg7': '0x01', 'msg8': '0x03', 'msg9': 255, 'msg10': '0x05', 'msg11': '0x63', 'msg12': '0x00', 'msg13': '0x00', 'msg14': '0x00', 'msg15': '0x00', 'msg16': '0x00'}
[2021-01-22 18:11:14][DEBUG] : Subtype = response on a mode command
[2021-01-22 18:11:14][DEBUG] : Firmware version = 0x21
[2021-01-22 18:11:14][DEBUG] : RFXtrx433 operating at 433.92MHz
[2021-01-22 18:11:14][DEBUG] : Hardware major version = 0x01
[2021-01-22 18:11:14][DEBUG] : Hardware minor version = 0x03
[2021-01-22 18:11:14][DEBUG] : Output power = 237 dBm
[2021-01-22 18:11:14][DEBUG] : Firmware Pro1
[2021-01-22 18:11:14][DEBUG] : Noise level (only used in special firmware) = 0x63
[2021-01-22 18:11:14][DEBUG] : undec on : 0
[2021-01-22 18:11:14][DEBUG] : Imagintronix,Opus/Alecto2010/Alecto : 0
[2021-01-22 18:11:14][DEBUG] : Byron SX,SelectPlus/Alecto5500 : 0
[2021-01-22 18:11:14][DEBUG] : RSL,Revolt/La Crosse : 0
[2021-01-22 18:11:14][DEBUG] : Lighting4/Davis EU : 0
[2021-01-22 18:11:14][DEBUG] : FineOffset,Viking/Davis US : 0
[2021-01-22 18:11:14][DEBUG] : Rubicson,Alecto,Banggood/Davis AU : 0
[2021-01-22 18:11:14][DEBUG] : AE Blyss : 0
[2021-01-22 18:11:14][DEBUG] : BlindsTx : 0
[2021-01-22 18:11:14][DEBUG] : BlindsT0 : 0
[2021-01-22 18:11:14][DEBUG] : Proguard : 0
[2021-01-22 18:11:14][DEBUG] : Legrand CAD : 0
[2021-01-22 18:11:14][DEBUG] : La Crosse : 1
[2021-01-22 18:11:14][DEBUG] : Hideki,TFA,Cresta,UPM/FS20 : 1
[2021-01-22 18:11:14][DEBUG] : AD LightwaveRF : 0
[2021-01-22 18:11:14][DEBUG] : Mertik/Edisio : 0
[2021-01-22 18:11:14][DEBUG] : Visonic : 0
[2021-01-22 18:11:14][DEBUG] : ATI/cartelectronic/Meiantech,Atlantic : 0
[2021-01-22 18:11:14][DEBUG] : Oregon Scientific/Keeloq : 1
[2021-01-22 18:11:14][DEBUG] : Meiantech,Atlantic/Proguard : 0
[2021-01-22 18:11:14][DEBUG] : HomeEasy EU : 1
[2021-01-22 18:11:14][DEBUG] : AC : 1
[2021-01-22 18:11:14][DEBUG] : ARC : 1
[2021-01-22 18:11:14][DEBUG] : X10 : 1
[2021-01-22 18:11:14][DEBUG] : FunkBus 433.42/Itho CVE RFT : 0
[2021-01-22 18:11:14][DEBUG] : MCZ 434.50/Itho CVE ECO RFT : 0
[2021-01-22 18:11:14][DEBUG] : Honeywell Chime : 0
[2021-01-22 18:11:14][DEBUG] : HomeConfort,Fan : 0
[2021-01-22 18:11:14][DEBUG] : Keeloq : 0
[2021-01-22 18:11:14][DEBUG] : Client connected to [127.0.0.1:55418]
[2021-01-22 18:11:14][DEBUG] : Message read from socket: b'{"apikey":"MVwXZJQ3Gj2cv3683i1pwGArkYah0jIE","cmd":"add","device":{"id":"08C7519E"}}'
[2021-01-22 18:11:14][DEBUG] : Client disconnected from [127.0.0.1:55418]
[2021-01-22 18:11:14][DEBUG] : Client connected to [127.0.0.1:55420]
[2021-01-22 18:11:14][DEBUG] : Message read from socket: b'{"apikey":"MVwXZJQ3Gj2cv3683i1pwGArkYah0jIE","cmd":"add","device":{"id":"0125D39A"}}'
[2021-01-22 18:11:14][DEBUG] : Client disconnected from [127.0.0.1:55420]
[2021-01-22 18:11:14][INFO] : Démon RFXcom lancé
[2021-01-22 18:11:14][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-01-22 18:11:14][DEBUG] : Add device : {'id': '08C7519E'}
[2021-01-22 18:11:14][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2021-01-22 18:11:14][DEBUG] : Add device : {'id': '0125D39A'}
[2021-01-22 18:11:15][DEBUG] : msg3: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2021-01-22 18:11:15][DEBUG] : msg4: [0, 0, 0, 0, 1, 1, 0, 0] / 0c
[2021-01-22 18:11:15][DEBUG] : msg5: [0, 0, 1, 0, 1, 1, 1, 1] / 2f
[2021-01-22 18:11:15][DEBUG] : msg6: [0, 0, 0, 0, 0, 0, 0, 0] / 00
[2021-01-22 18:11:15][DEBUG] : Command: 0d00000203531C000c2f00000000
[2021-01-22 18:11:15][DEBUG] : Protocol actually activated 000c2f00
[2021-01-22 18:11:15][DEBUG] : Actual Frequency 53
[2021-01-22 18:11:15][DEBUG] : Wanted protocol 000c2f00