Daikin BRP069C81

Plugins Confort
,
1

Bonjour,
Je ne suis pas sûr d’être au bon endroit d’où ma question.
Est-ce ce plugin qu’il faut utiliser avec le module Wifi BRP069C81 ?
Après installation, le module semble être trouvé mais je n’ai aucune remontée d’information et des erreurs
Merci pour votre aide

0000|[2023-02-27 18:50:02]DEBUG : [CRON START]===== cron().nb ctrl=1
0001|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest(gbi) starting ...
0002|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest() send request...
0003|[2023-02-27 18:50:02]DEBUG : [olindoteTools::network_sendRequestByCurl()] _return=Array (     [fError] =>      [fData] => ret=OK,type=aircon,subtype=qa,reg=eu,dst=1,ver=1_12_84,rev=7B08C56C,pow=1,err=0,location=0,name=%44%61%69%6b%69%6e%41%50%36%30%37%38%37,icon=0,method=polling,port=30050,id=43a9d264-78e2-4cc2-9aad-73da158b5b9b,lpw_flag=0,adp_kind=4,pv=0,cpv=0,led=1,en_setzone=1,mac=E84F25CDF7DE,ssid=DaikinAP60787,adp_mode=ap_run,en_hol=0,grp_name=,en_grp=0,edid=0000000002724190,sw_id=19002928,pw=,ssid1=FTUBI_DOMO,radio1=-58     [fInfo] => Array         (             [url] => http://192.168.2.221/common/basic_info             [content_type] => text/plain             [http_code] => 200             [header_size] => 85             [request_size] => 69             [filetime] => -1             [ssl_verify_result] => 0             [redirect_count] => 0             [total_time] => 0.200679             [namelookup_time] => 5.2E-5             [connect_time] => 0.004009             [pretransfer_time] => 0.004255             [size_upload] => 0             [size_download] => 409             [speed_download] => 2045             [speed_upload] => 0             [download_content_length] => 409             [upload_content_length] => -1             [starttransfer_time] => 0.200612             [redirect_time] => 0             [redirect_url] =>              [primary_ip] => 192.168.2.221             [certinfo] => Array                 (                 )              [primary_port] => 80             [local_ip] => 192.168.2.51             [local_port] => 38472             [http_version] => 2             [protocol] => 1             [ssl_verifyresult] => 0             [scheme] => HTTP             [appconnect_time_us] => 0             [connect_time_us] => 4009             [namelookup_time_us] => 52             [pretransfer_time_us] => 4255             [redirect_time_us] => 0             [starttransfer_time_us] => 200612             [total_time_us] => 200679             [request_header] => GET /common/basic_info HTTP/1.1 Host: 192.168.2.221 Accept: */*           )  )
0004|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest() request back, analyse it
0005|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest() request is not false, analyse content.
0006|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest(gbi): response is => ret=OK,type=aircon,subtype=qa,reg=eu,dst=1,ver=1_12_84,rev=7B08C56C,pow=1,err=0,location=0,name=%44%61%69%6b%69%6e%41%50%36%30%37%38%37,icon=0,method=polling,port=30050,id=43a9d264-78e2-4cc2-9aad-73da158b5b9b,lpw_flag=0,adp_kind=4,pv=0,cpv=0,led=1,en_setzone=1,mac=E84F25CDF7DE,ssid=DaikinAP60787,adp_mode=ap_run,en_hol=0,grp_name=,en_grp=0,edid=0000000002724190,sw_id=19002928,pw=,ssid1=FTUBI_DOMO,radio1=-58
0007|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] EYE: Active:0 - State:0 - Date:
0008|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] cron()._sSynchroPeriodTemp=1
0009|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] cron()._sSynchroPeriod=1
0010|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] cron()._sSynchroPeriodClimUsed=-1
0011|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] cron(): try start synchro ...
0012|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] synchronize(gsi,gci): starting ...
0013|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] DOCUpdateCmd(gsi): starting ....
0014|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest(gsi) starting ...
0015|[2023-02-27 18:50:02]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest() send request...
0016|[2023-02-27 18:50:03]DEBUG : [olindoteTools::network_sendRequestByCurl()] _return=Array (     [fError] =>      [fData] => Page Not Found /aircon/get_sensor_info     [fInfo] => Array         (             [url] => http://192.168.2.221/aircon/get_sensor_info             [content_type] => text/plain             [http_code] => 404             [header_size] => 72             [request_size] => 74             [filetime] => -1             [ssl_verify_result] => 0             [redirect_count] => 0             [total_time] => 0.197653             [namelookup_time] => 3.5E-5             [connect_time] => 0.003988             [pretransfer_time] => 0.004196             [size_upload] => 0             [size_download] => 39             [speed_download] => 197             [speed_upload] => 0             [download_content_length] => 39             [upload_content_length] => -1             [starttransfer_time] => 0.197615             [redirect_time] => 0             [redirect_url] =>              [primary_ip] => 192.168.2.221             [certinfo] => Array                 (                 )              [primary_port] => 80             [local_ip] => 192.168.2.51             [local_port] => 38476             [http_version] => 2             [protocol] => 1             [ssl_verifyresult] => 0             [scheme] => HTTP             [appconnect_time_us] => 0             [connect_time_us] => 3988             [namelookup_time_us] => 35             [pretransfer_time_us] => 4196             [redirect_time_us] => 0             [starttransfer_time_us] => 197615             [total_time_us] => 197653             [request_header] => GET /aircon/get_sensor_info HTTP/1.1 Host: 192.168.2.221 Accept: */*           )  )
0017|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest() request back, analyse it
0018|[2023-02-27 18:50:03]WARNING : [CRON|Pièce de vie(102)] sendDOCRequest(): ERROR: Le flux suivant n'est pas accéssible (error/timeout):http://192.168.2.221/aircon/get_sensor_info || HTTP_CODE=404 || ERROR=
0019|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] network_setHealth()._healthNetwork=Array (     [0] => {"2023-02-27 18:50:03":"X"}     [1] => {"2023-02-27 18:49:02":"X"}     [2] => {"2023-02-27 18:49:02":"X"}     [3] => {"2023-02-27 18:48:02":"X"}     [4] => {"2023-02-27 18:48:02":"X"}     [5] => {"2023-02-27 18:47:02":"X"}     [6] => {"2023-02-27 18:47:02":"X"}     [7] => {"2023-02-27 18:46:02":"X"}     [8] => {"2023-02-27 18:46:02":"X"}     [9] => {"2023-02-27 18:45:03":"X"}     [10] => {"2023-02-27 18:45:03":"X"}     [11] => {"2023-02-27 18:44:02":"X"}     [12] => {"2023-02-27 18:44:02":"X"}     [13] => {"2023-02-27 18:43:03":"X"}     [14] => {"2023-02-27 18:43:03":"X"} )
0020|[2023-02-27 18:50:03]WARNING : [CRON|Pièce de vie(102)] DOCUpdateCmd(): ERROR: Une erreur s'est produite lors de la récupération des informations de la méthode / controleur: gsi | Pièce de vie
0021|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] DOCUpdateCmd(gci): starting ....
0022|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest(gci) starting ...
0023|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest() send request...
0024|[2023-02-27 18:50:03]DEBUG : [olindoteTools::network_sendRequestByCurl()] _return=Array (     [fError] =>      [fData] => Page Not Found /aircon/get_control_info     [fInfo] => Array         (             [url] => http://192.168.2.221/aircon/get_control_info             [content_type] => text/plain             [http_code] => 404             [header_size] => 72             [request_size] => 75             [filetime] => -1             [ssl_verify_result] => 0             [redirect_count] => 0             [total_time] => 0.195971             [namelookup_time] => 3.7E-5             [connect_time] => 0.00399             [pretransfer_time] => 0.004094             [size_upload] => 0             [size_download] => 40             [speed_download] => 205             [speed_upload] => 0             [download_content_length] => 40             [upload_content_length] => -1             [starttransfer_time] => 0.195942             [redirect_time] => 0             [redirect_url] =>              [primary_ip] => 192.168.2.221             [certinfo] => Array                 (                 )              [primary_port] => 80             [local_ip] => 192.168.2.51             [local_port] => 38478             [http_version] => 2             [protocol] => 1             [ssl_verifyresult] => 0             [scheme] => HTTP             [appconnect_time_us] => 0             [connect_time_us] => 3990             [namelookup_time_us] => 37             [pretransfer_time_us] => 4094             [redirect_time_us] => 0             [starttransfer_time_us] => 195942             [total_time_us] => 195971             [request_header] => GET /aircon/get_control_info HTTP/1.1 Host: 192.168.2.221 Accept: */*           )  )
0025|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] sendDOCRequest() request back, analyse it
0026|[2023-02-27 18:50:03]WARNING : [CRON|Pièce de vie(102)] sendDOCRequest(): ERROR: Le flux suivant n'est pas accéssible (error/timeout):http://192.168.2.221/aircon/get_control_info || HTTP_CODE=404 || ERROR=
0027|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] network_setHealth()._healthNetwork=Array (     [0] => {"2023-02-27 18:50:03":"X"}     [1] => {"2023-02-27 18:50:03":"X"}     [2] => {"2023-02-27 18:49:02":"X"}     [3] => {"2023-02-27 18:49:02":"X"}     [4] => {"2023-02-27 18:48:02":"X"}     [5] => {"2023-02-27 18:48:02":"X"}     [6] => {"2023-02-27 18:47:02":"X"}     [7] => {"2023-02-27 18:47:02":"X"}     [8] => {"2023-02-27 18:46:02":"X"}     [9] => {"2023-02-27 18:46:02":"X"}     [10] => {"2023-02-27 18:45:03":"X"}     [11] => {"2023-02-27 18:45:03":"X"}     [12] => {"2023-02-27 18:44:02":"X"}     [13] => {"2023-02-27 18:44:02":"X"}     [14] => {"2023-02-27 18:43:03":"X"} )
0028|[2023-02-27 18:50:03]WARNING : [CRON|Pièce de vie(102)] DOCUpdateCmd(): ERROR: Une erreur s'est produite lors de la récupération des informations de la méthode / controleur: gci | Pièce de vie
0029|[2023-02-27 18:50:03]DEBUG : [CRON|Pièce de vie(102)] cron(): synchro return true (or doRefresh).
0030|[2023-02-27 18:50:03]DEBUG : [CRON END]=====(0.725)

0000|********************************************************
0001|*    'Daikin Online Ctrl': installation des dépendances    *
0002|********************************************************
0003|.......... olindoteTools class : start
0004|INSTALL:: STARTING....
0005|INSTALL:: END/olindoteTools class is ok.
0006|---------- olindoteTools class : end
0007|=============== Statut ===============
0008|***
0009|ls: cannot access '/var/www/html/data/custom/php/olindote/': No such file or directory
0010|----------
0011|********************************************************
0012|*      'Daikin Online Ctrl': Installation terminée         *
0013|********************************************************
2

Bonsoir,

Quel est le modèle de ta clim ?

3

Le modèle est une clim gainable avec l’unité extérieure SkyAir FBA71A2VEB9 et unité dans les combles ARXM71R
Le module Wifi est fonctionnel car fonctionne avec mon téléphone et l’application ONECTA-Daikin
La version du micrologiciel est 1_12_84

4

Je pense qu’il faut t’orienter vers l’autre plugin, prévu pour les nouvelles clim.

5

Slt, applis onecta donc ya des chances que tu ne sois pas sur le bon plugins mais plutôt sur dailkinrccloud

6

Est-ce celui-ci ?
image

7

Merci, fonctionne nickel avec Daikin Onecta :slight_smile:

8

Cool, pense à sélectionner une solution et bonne utilisation !

9

Ce sujet a été automatiquement fermé après 24 heures suivant le dernier commentaire. Aucune réponse n’est permise dorénavant.