Capteur luminosité Xiaomi - changer la fréquence de rafraichissement

reval512 · Octobre 20, 2020, 9:30

Bonjour,

J’ai installé des détecteurs de luminosité xiaomi. Ils sont bien inclus mais j’aimerai changer la fréquence de rafraichissement (par défaut 10 minutes).

Dans un autre post, il a été dit de changer la valeur de la commande setReportIlluminanceXiaomi.

J’ai naïvement changé la valeur dans la zone txt de la commande avec ceci :
targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=30&MaxInterval=40

Cela devrait donner un taux de rafraichissement entre 30 et 40 secondes ?

Mais cela ne fonctionne pas.

J’ai préféré créer un nouveau sujet pour ne pas fausser l’autre sujet.

Merci

Bonne soirée

sebfar · Octobre 21, 2020, 6:18

Salut tu as une photo de tes capteurs ?

kiwihc16 · Octobre 21, 2020, 1:37

As tu envoyé la commande au device en le réveillant ?
Peux tu le faire et partager les lignes qui apparaissent dans AbeilleParser durant la manip ?

tcharp38 · Octobre 21, 2020, 2:44

@kiwihc16
Je pense qu’il serait bon de raccourcir un peu le temps d’attente entre 2 infos du capteur. Je le trouve un peu trop lent.

kiwihc16 · Octobre 21, 2020, 7:57

J ai mis 10 min pour essayer de préserver la batterie tout en ayant une définition assez intéressante. C est modifiable par l utilisateur. Pas super friendly mais faisable.

reval512 · Octobre 21, 2020, 7:58

Bonjour,

Le modèle du capteur est le « gzcgq01lm »

J’ai essayé de le réveiller et de lancer la commande, voici le log que j’ai eu :

L’appareil concerné est celui avec l’adresse aec8

Dans abeille

> [2020-10-21 21:50:42][DEBUG] : message(topic='Abeille2/aec8/0000-01-0005', payload='lumi.sen_ill.mgl01')
> [2020-10-21 21:50:42][DEBUG] : Update ONLINE Status
> [2020-10-21 21:50:47][DEBUG] : execute ->action<- function with options ->null<-
> [2020-10-21 21:50:47][DEBUG] : topic: CmdAbeille2/aec8/setReport
> [2020-10-21 21:50:47][DEBUG] : request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=30&MaxInterval=40
> [2020-10-21 21:50:47][DEBUG] : topic: CmdAbeille2/aec8/setReport request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=30&MaxInterval=40
> [2020-10-21 21:50:47][DEBUG] : (All) Msg sent: {"message":{"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=30&MaxInterval=40"}}

Dans le parser

> [2020-10-21 21:53:23][debug] Abeille2, Type=8102/Attribut report, SQN=07, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
> [2020-10-21 21:53:27][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=00, PacketType=0009
> [2020-10-21 21:53:27][debug] Abeille1, Type=8009/Network state response, ShortAddr=0000, ExtAddr=00158D0001ECAEA9, PANId=4735, ExtPANId=886521227ccb3472, Channel=11
> [2020-10-21 21:53:27][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=00, PacketType=0009
> [2020-10-21 21:53:27][debug] Abeille2, Type=8009/Network state response, ShortAddr=0000, ExtAddr=00158D00021E13D0, PANId=b6b5, ExtPANId=47a569762f4563b6, Channel=15
> [2020-10-21 21:53:33][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=01, PacketType=0120
> [2020-10-21 21:53:40][debug] Abeille2, Type=8701/Route Discovery Confirm (decoded but Not Processed), MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=00 (ZPS_EVENT_NONE->)
> [2020-10-21 21:53:42][debug] Abeille2, Type=8701/Route Discovery Confirm (decoded but Not Processed), MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=00 (ZPS_EVENT_NONE->)
> [2020-10-21 21:53:56][debug] Abeille2, Type=8102/Attribut report, SQN=09, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
> [2020-10-21 21:54:00][debug] Abeille2, Type=8102/Attribut report, SQN=0b, SrcAddr=aec8, EndPoint=01, ClustID=0400, AttrID=0000, AttrStatus=00, AttrDataType=21, AttrSize=0002, DataByteList=2cc6
> [2020-10-21 21:54:03][debug] Abeille2, Type=8102/Attribut report, SQN=0c, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
> [2020-10-21 21:54:06][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=02, PacketType=0100
> [2020-10-21 21:54:06][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=03, PacketType=0100
> [2020-10-21 21:54:06][debug] Abeille2, Type=8102/Attribut report, SQN=02, SrcAddr=2058, EndPoint=0b, ClustID=0006, AttrID=0000, AttrStatus=00, AttrDataType=10, AttrSize=0001, DataByteList=00
> [2020-10-21 21:54:06][debug] Abeille2, Type=8102/Attribut report, SQN=03, SrcAddr=2058, EndPoint=0b, ClustID=0008, AttrID=0000, AttrStatus=00, AttrDataType=20, AttrSize=0001, DataByteList=fe
> [2020-10-21 21:54:09][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=04, PacketType=0100
> [2020-10-21 21:54:09][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=05, PacketType=0100
> [2020-10-21 21:54:09][debug] Abeille2, Type=8701/Route Discovery Confirm (decoded but Not Processed), MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=00 (ZPS_EVENT_NONE->)
> [2020-10-21 21:54:09][debug] Abeille2, Type=8102/Attribut report, SQN=04, SrcAddr=495e, EndPoint=0b, ClustID=0006, AttrID=0000, AttrStatus=00, AttrDataType=10, AttrSize=0001, DataByteList=01
> [2020-10-21 21:54:09][debug] Abeille2, Type=8102/Attribut report, SQN=05, SrcAddr=495e, EndPoint=0b, ClustID=0008, AttrID=0000, AttrStatus=00, AttrDataType=20, AttrSize=0001, DataByteList=fe
> [2020-10-21 21:54:09][debug] Abeille2, Type=8102/Attribut report, SQN=0d, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
> [2020-10-21 21:54:12][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=06, PacketType=0100
> [2020-10-21 21:54:12][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=07, PacketType=0100
> [2020-10-21 21:54:12][debug] Abeille2, Type=8102/Attribut report, SQN=06, SrcAddr=8ec1, EndPoint=0b, ClustID=0006, AttrID=0000, AttrStatus=00, AttrDataType=10, AttrSize=0001, DataByteList=01
> [2020-10-21 21:54:12][debug] Abeille2, Type=8102/Attribut report, SQN=07, SrcAddr=8ec1, EndPoint=0b, ClustID=0008, AttrID=0000, AttrStatus=00, AttrDataType=20, AttrSize=0001, DataByteList=fe
> [2020-10-21 21:54:15][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=08, PacketType=0100
> [2020-10-21 21:54:15][debug] Abeille2, Type=8102/Attribut report, SQN=08, SrcAddr=5326, EndPoint=0b, ClustID=0006, AttrID=0000, AttrStatus=00, AttrDataType=10, AttrSize=0001, DataByteList=01
> [2020-10-21 21:54:15][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=09, PacketType=0100
> [2020-10-21 21:54:15][debug] Abeille2, Type=8102/Attribut report, SQN=09, SrcAddr=5326, EndPoint=0b, ClustID=0008, AttrID=0000, AttrStatus=00, AttrDataType=20, AttrSize=0001, DataByteList=fe

Pas vraiment certains d’avoir fait ce qui a été demandé.
J’ai appuyé sur le bouton de capteur pour le réveiller (ligne dans le log) et ensuite envoyé la commande depuis la liste des commandes dispos du capteur.

Merci

Bone soirée

kiwihc16 · Octobre 22, 2020, 6:24

D apres le log Abeille tu fais la bonne commande.
Visiblement tu reveilles aussi le device car je vois son nom dans AbeilleParser. Mais je ne vois pas la confirmation de la commande.
Tu devrais voir une message similaire à :

[2020-10-22 08:07:49][debug] Abeille1, Type=8120/Configure Reporting response (decoded but not Processed), SQN=31, SrcAddr=e74e, EndPoint=01, ........

Dans AbeilleParser.
Essayes dans l ordre suivant:

envoies la commande
reveil le device dans la seconde qui suit

reval512 · Octobre 22, 2020, 9:08

Bonjour,

J’ai retenté dans cet ordre, j’ai eu la ligne concernée mais ça ne semble pas fonctionner non plus.

Est-ce que la commande Time-Time correspond à la dernière discussion avec le capteur ?

Voici les logs que j’ai eu (j’ai essayé 2x la manipulation)

Parser

[2020-10-22 10:52:50][debug] Abeille2, Type=8102/Attribut report, SQN=dc, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
[2020-10-22 10:52:51][debug] Abeille2, Type=8120/Configure Reporting response (decoded but not Processed), SQN=2d, SrcAddr=aec8, EndPoint=01, ClusterId=0400, Attribute=0000, Status=87

Abeille

[2020-10-22 10:52:50][DEBUG] : message(topic='Abeille2/aec8/0000-01-0005', payload='lumi.sen_ill.mgl01')
[2020-10-22 10:52:50][DEBUG] : Update ONLINE Status
[2020-10-22 10:52:50][DEBUG] : execute ->action<- function with options ->null<-
[2020-10-22 10:52:50][DEBUG] : topic: CmdAbeille2/aec8/setReport
[2020-10-22 10:52:50][DEBUG] : request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=30&MaxInterval=40
[2020-10-22 10:52:50][DEBUG] : topic: CmdAbeille2/aec8/setReport request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=30&MaxInterval=40
[2020-10-22 10:52:50][DEBUG] : (All) Msg sent: {"message":{"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=30&MaxInterval=40"}}
[2020-10-22 10:52:51][DEBUG] : message(topic='Abeille2/Ruche/Network-Report', payload='2020-10-22 10:52:51 Attribut: 0000 Status (00: Ok, <>0: Error): 87')

Par contre pour la 2e fois j’ai changé les valeurs min/max en 5 et 7 (au lieu de 30 et 40)

Parser

[2020-10-22 11:01:25][debug] Abeille2, Type=8102/Attribut report, SQN=e3, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
[2020-10-22 11:01:25][debug] Abeille2, Type=8120/Configure Reporting response (decoded but not Processed), SQN=9e, SrcAddr=aec8, EndPoint=01, ClusterId=0400, Attribute=0000, Status=87

Abeille

[2020-10-22 11:01:24][DEBUG] : execute ->action<- function with options ->null<-
[2020-10-22 11:01:24][DEBUG] : topic: CmdAbeille2/aec8/setReport
[2020-10-22 11:01:24][DEBUG] : request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=5&MaxInterval=7
[2020-10-22 11:01:24][DEBUG] : topic: CmdAbeille2/aec8/setReport request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=5&MaxInterval=7
[2020-10-22 11:01:24][DEBUG] : (All) Msg sent: {"message":{"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=5&MaxInterval=7"}}
[2020-10-22 11:01:25][DEBUG] : message(topic='Abeille2/aec8/0000-01-0005', payload='lumi.sen_ill.mgl01')
[2020-10-22 11:01:25][DEBUG] : Update ONLINE Status
[2020-10-22 11:01:25][DEBUG] : message(topic='Abeille2/Ruche/Network-Report', payload='2020-10-22 11:01:25 Attribut: 0000 Status (00: Ok, <>0: Error): 87')

Merci

Bonne journée

kiwihc16 · Octobre 22, 2020, 10:55

Status 87 semble indiquer une erreur. Peux tu refaire la meme manip avec les valeurs d origines ?

reval512 · Octobre 22, 2020, 1:54

Voici les logs

Abeille

[2020-10-22 15:53:05][DEBUG] : execute ->action<- function with options ->null<-
[2020-10-22 15:53:05][DEBUG] : topic: CmdAbeille2/aec8/setReport
[2020-10-22 15:53:05][DEBUG] : request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700
[2020-10-22 15:53:05][DEBUG] : topic: CmdAbeille2/aec8/setReport request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700
[2020-10-22 15:53:05][DEBUG] : (All) Msg sent: {"message":{"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700"}}
[2020-10-22 15:53:06][DEBUG] : message(topic='Abeille2/2058/0006-0b-0000', payload='0')
[2020-10-22 15:53:06][DEBUG] : message(topic='Abeille2/Ruche/Network-Report', payload='2020-10-22 15:53:06 Attribut: 0000 Status (00: Ok, <>0: Error): 00')
[2020-10-22 15:53:07][DEBUG] : message(topic='Abeille2/aec8/0000-01-0005', payload='lumi.sen_ill.mgl01')

Parser

[2020-10-22 15:53:06][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=ab, PacketType=0100
[2020-10-22 15:53:06][debug] Abeille2, Type=8000/Status, Status=14-(ZigBee Error Code unknown), SQN=00, PacketType=0100
[2020-10-22 15:53:06][debug] Abeille2, Type=8102/Attribut report, SQN=ab, SrcAddr=2058, EndPoint=0b, ClustID=0006, AttrID=0000, AttrStatus=00, AttrDataType=10, AttrSize=0001, DataByteList=00
[2020-10-22 15:53:06][debug] Abeille2, Type=8120/Configure Reporting response (decoded but not Processed), SQN=aa, SrcAddr=aec8, EndPoint=01, ClusterId=0400, Attribute=0000, Status=00
[2020-10-22 15:53:06][debug] Abeille2, Type=8102/Attribut report, SQN=78, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01

kiwihc16 · Octobre 22, 2020, 2:29

Le status est a 0 ça veut dire que le capteur bien accepté la demande.

kiwihc16 · Octobre 22, 2020, 2:29

Peux faire une commande qui fonctionne et une commande qui ne fonctionne pas et partager le log abeilleCmd.

reval512 · Octobre 22, 2020, 8:56

voici les logs avec les valeurs d’origines

Abeille

[2020-10-22 22:43:13][DEBUG] : execute ->action<- function with options ->null<-
[2020-10-22 22:43:13][DEBUG] : topic: CmdAbeille2/aec8/setReport
[2020-10-22 22:43:13][DEBUG] : request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700
[2020-10-22 22:43:13][DEBUG] : topic: CmdAbeille2/aec8/setReport request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700
[2020-10-22 22:43:13][DEBUG] : (All) Msg sent: {"message":{"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700"}}
[2020-10-22 22:43:14][DEBUG] : message(topic='Abeille2/aec8/0000-01-0005', payload='lumi.sen_ill.mgl01')
[2020-10-22 22:43:14][DEBUG] : Update ONLINE Status

Parser

[2020-10-22 22:43:12][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=66, PacketType=0100
[2020-10-22 22:43:12][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=67, PacketType=0100
[2020-10-22 22:43:12][debug] Abeille2, Type=8102/Attribut report, SQN=66, SrcAddr=8ec1, EndPoint=0b, ClustID=0006, AttrID=0000, AttrStatus=00, AttrDataType=10, AttrSize=0001, DataByteList=00
[2020-10-22 22:43:12][debug] Abeille2, Type=8102/Attribut report, SQN=67, SrcAddr=8ec1, EndPoint=0b, ClustID=0008, AttrID=0000, AttrStatus=00, AttrDataType=20, AttrSize=0001, DataByteList=33
[2020-10-22 22:43:13][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=68, PacketType=0120
[2020-10-22 22:43:14][debug] Abeille2, Type=8102/Attribut report, SQN=d4, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
[2020-10-22 22:43:14][debug] Abeille2, Type=8120/Configure Reporting response (decoded but not Processed), SQN=68, SrcAddr=aec8, EndPoint=01, ClusterId=0400, Attribute=0000, Status=00
[2020-10-22 22:43:15][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=69, PacketType=0100
[2020-10-22 22:43:15][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=6a, PacketType=0100
[2020-10-22 22:43:15][debug] Abeille2, Type=8102/Attribut report, SQN=69, SrcAddr=5326, EndPoint=0b, ClustID=0006, AttrID=0000, AttrStatus=00, AttrDataType=10, AttrSize=0001, DataByteList=00
[2020-10-22 22:43:15][debug] Abeille2, Type=8102/Attribut report, SQN=6a, SrcAddr=5326, EndPoint=0b, ClustID=0008, AttrID=0000, AttrStatus=00, AttrDataType=20, AttrSize=0001, DataByteList=33

cmd

[2020-10-22 22:43:12][debug] ----------
[2020-10-22 22:43:12][info ] procmsg fct - message: {"topic":"CmdAbeille2\/8ec1\/ReadAttributeRequest","payload":"EP=0B&clusterId=0006&attributeId=0000","priority":4}
[2020-10-22 22:43:12][debug] AbeilleCmd: Msg received: "EP=0B&clusterId=0006&attributeId=0000" from NE
[2020-10-22 22:43:12][debug] AbeilleCmd: Msg analysed: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"8ec1","clusterId":"0006","attributeId":"0000","EP":"0B","Proprio":"0000"} from NE
[2020-10-22 22:43:12][debug] processCmd fct - begin processCmd function, Command: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"8ec1","clusterId":"0006","attributeId":"0000","EP":"0B","Proprio":"0000"}
[2020-10-22 22:43:12][debug] sendCmd fct - dest: "Abeille2" cmd: "0100" priority: 4
[2020-10-22 22:43:12][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-10-22 22:43:12][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0100-000e-028ec1010B000600000000010000
[2020-10-22 22:43:12][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille2/8ec1/ReadAttributeRequest -> EP=0B&clusterId=0008&attributeId=0000
[2020-10-22 22:43:12][debug] ----------
[2020-10-22 22:43:12][info ] procmsg fct - message: {"topic":"CmdAbeille2\/8ec1\/ReadAttributeRequest","payload":"EP=0B&clusterId=0008&attributeId=0000","priority":4}
[2020-10-22 22:43:12][debug] AbeilleCmd: Msg received: "EP=0B&clusterId=0008&attributeId=0000" from NE
[2020-10-22 22:43:12][debug] AbeilleCmd: Msg analysed: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"8ec1","clusterId":"0008","attributeId":"0000","EP":"0B","Proprio":"0000"} from NE
[2020-10-22 22:43:12][debug] processCmd fct - begin processCmd function, Command: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"8ec1","clusterId":"0008","attributeId":"0000","EP":"0B","Proprio":"0000"}
[2020-10-22 22:43:12][debug] sendCmd fct - dest: "Abeille2" cmd: "0100" priority: 4
[2020-10-22 22:43:12][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-10-22 22:43:12][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0100-000e-028ec1010B000800000000010000
[2020-10-22 22:43:13][debug] Message pulled from queue queueKeyAbeilleToCmd: CmdAbeille2/aec8/setReport -> targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700
[2020-10-22 22:43:13][debug] ----------
[2020-10-22 22:43:13][info ] procmsg fct - message: {"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=600&MaxInterval=700","priority":1}
[2020-10-22 22:43:13][debug] processCmd fct - begin processCmd function, Command: {"setReport":"1","priority":1,"dest":"Abeille2","address":"aec8","targetEndpoint":"01","ClusterId":"0400","AttributeType":"21","AttributeId":"0000","MinInterval":"0258","MaxInterval":"02bc"}
[2020-10-22 22:43:13][debug] command setReport
[2020-10-22 22:43:13][debug] sendCmd fct - dest: "Abeille2" cmd: "0120" priority: 1
[2020-10-22 22:43:13][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-10-22 22:43:13][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0120-0017-02aec801010400000000000100210000025802bc000000
[2020-10-22 22:43:15][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille2/5326/ReadAttributeRequest -> EP=0B&clusterId=0006&attributeId=0000
[2020-10-22 22:43:15][debug] ----------
[2020-10-22 22:43:15][info ] procmsg fct - message: {"topic":"CmdAbeille2\/5326\/ReadAttributeRequest","payload":"EP=0B&clusterId=0006&attributeId=0000","priority":4}
[2020-10-22 22:43:15][debug] AbeilleCmd: Msg received: "EP=0B&clusterId=0006&attributeId=0000" from NE
[2020-10-22 22:43:15][debug] AbeilleCmd: Msg analysed: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"5326","clusterId":"0006","attributeId":"0000","EP":"0B","Proprio":"0000"} from NE
[2020-10-22 22:43:15][debug] processCmd fct - begin processCmd function, Command: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"5326","clusterId":"0006","attributeId":"0000","EP":"0B","Proprio":"0000"}
[2020-10-22 22:43:15][debug] sendCmd fct - dest: "Abeille2" cmd: "0100" priority: 4
[2020-10-22 22:43:15][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-10-22 22:43:15][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0100-000e-025326010B000600000000010000
[2020-10-22 22:43:15][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille2/5326/ReadAttributeRequest -> EP=0B&clusterId=0008&attributeId=0000
[2020-10-22 22:43:15][debug] ----------
[2020-10-22 22:43:15][info ] procmsg fct - message: {"topic":"CmdAbeille2\/5326\/ReadAttributeRequest","payload":"EP=0B&clusterId=0008&attributeId=0000","priority":4}
[2020-10-22 22:43:15][debug] AbeilleCmd: Msg received: "EP=0B&clusterId=0008&attributeId=0000" from NE
[2020-10-22 22:43:15][debug] AbeilleCmd: Msg analysed: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"5326","clusterId":"0008","attributeId":"0000","EP":"0B","Proprio":"0000"} from NE
[2020-10-22 22:43:15][debug] processCmd fct - begin processCmd function, Command: {"ReadAttributeRequest":"1","priority":4,"dest":"Abeille2","address":"5326","clusterId":"0008","attributeId":"0000","EP":"0B","Proprio":"0000"}
[2020-10-22 22:43:15][debug] sendCmd fct - dest: "Abeille2" cmd: "0100" priority: 4
[2020-10-22 22:43:15][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-10-22 22:43:15][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0100-000e-025326010B000800000000010000
[2020-10-22 22:43:18][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille2/54aa/ReadAttributeRequest -> EP=0B&clusterId=0006&attributeId=0000
[2020-10-22 22:43:18][debug] ----------

Voici les logs pour les valeurs à 6 et 7

Abeille

[2020-10-22 22:50:02][DEBUG] : execute ->action<- function with options ->null<-
[2020-10-22 22:50:02][DEBUG] : topic: CmdAbeille2/aec8/setReport
[2020-10-22 22:50:02][DEBUG] : request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=6&MaxInterval=7
[2020-10-22 22:50:02][DEBUG] : topic: CmdAbeille2/aec8/setReport request: targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=6&MaxInterval=7
[2020-10-22 22:50:02][DEBUG] : (All) Msg sent: {"message":{"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=6&MaxInterval=7"}}

Parser

[2020-10-22 22:49:46][debug] Abeille2, Type=8102/Attribut report, SQN=d6, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
[2020-10-22 22:50:02][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=be, PacketType=0120
[2020-10-22 22:50:03][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=bf, PacketType=0100
[2020-10-22 22:50:03][debug] Abeille2, Type=8102/Attribut report, SQN=bf, SrcAddr=89ab, EndPoint=0b, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0006, DataByteList=LWB006
[2020-10-22 22:50:03][debug] Abeille2, Type=8102/Attribut report, SQN=d8, SrcAddr=aec8, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
[2020-10-22 22:50:04][debug] Abeille2, Type=8120/Configure Reporting response (decoded but not Processed), SQN=be, SrcAddr=aec8, EndPoint=01, ClusterId=0400, Attribute=0000, Status=87
[2020-10-22 22:50:07][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=c0, PacketType=0100
[2020-10-22 22:50:07][debug] Abeille2, Type=8000/Status, Status=00-(Success), SQN=c1, PacketType=0100

cmd

[2020-10-22 22:50:02][debug] Message pulled from queue queueKeyAbeilleToCmd: CmdAbeille2/aec8/setReport -> targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=6&MaxInterval=7
[2020-10-22 22:50:02][debug] ----------
[2020-10-22 22:50:02][info ] procmsg fct - message: {"topic":"CmdAbeille2\/aec8\/setReport","payload":"targetEndpoint=01&ClusterId=0400&AttributeId=0000&AttributeType=21&MinInterval=6&MaxInterval=7","priority":1}
[2020-10-22 22:50:02][debug] processCmd fct - begin processCmd function, Command: {"setReport":"1","priority":1,"dest":"Abeille2","address":"aec8","targetEndpoint":"01","ClusterId":"0400","AttributeType":"21","AttributeId":"0000","MinInterval":"0006","MaxInterval":"0007"}
[2020-10-22 22:50:02][debug] command setReport
[2020-10-22 22:50:02][debug] sendCmd fct - dest: "Abeille2" cmd: "0120" priority: 1
[2020-10-22 22:50:02][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-10-22 22:50:02][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0120-0017-02aec80101040000000000010021000000060007000000

Voilà j’espère qu’il y a ce qu’il faut.

Merci

Bonne soirée

kiwihc16 · Octobre 25, 2020, 8:01

Il faut que je teste sur mon systeme.