Ah si effectivement, celle qui est grise tout à droite « lampe parentale », n’est plus alimentée 
Concernant l’amélioration du maillage, je suis dans une petite maison avec des cloisons en placo, et rien n’est isolé à plus de 10 mètres, ça me parait court non ?
Je vais la supprimer de jeedom dans cas. Le maillage va-t-il se refaire tout seul ?
Vous pensez que ça peut être le problème avec le capteur de luminosité ? (il n’a jamais remonté de valeur de luminosité, même quand la « lampe parentale » était branchée)
Concernant ton capteur, je te suggere de faire un essai en le reincluant à « proximité » immediate de ta zigate. Ca doit enlever tout pb de routage.
Note que ca n’enlevera pas des soucis de perturbations que tu peux avoir et qui impactent peut etre plusieurs capteurs.
L’adresse courte est 111c dans ton cas (attention la reinclusion va la changer à nouveau).
Juste apres l’ inclusion tu peux regarder AbeilleParser en filtrant sur sa nouvelle adresse courte. Tu dois voir de l’activite venant de ce capteur
C’est ce que j’ai fait la dernière fois déjà, les logs que j’ai mis au début de ce post sont liés à cette inclusion proche de la zigate.
Je vais supprimer la lampe qui n’est plus alimentée, et re tenter la démarche pour voir ce que ça dit, sait-on jamais 
Merci
Re,
Pour en revenir à ton capteur Xiaomi GZCGQ01LM il est à la norme Zigbee 3 et je suis pas certain que la clé Zigate supporte cette norme, c’est une question à poser sur le forum de chez Zigate
Justement, si j’ai bien compris cette équipement est bien supporté par zigate, et marqué comme compatible avec Abeille. De plus, plusieurs personnes sur ce forum on bien des remontées d’infos de luminosité ;(
D’ailleurs, j’avais initialiement posé ma question sur un autre thread, mais le dev d’abeille m’a demandé de créer un nouveau sujet :
Salut eZaz,
Je suppose que tu as bien le capteur dans abeille.
Peux tu confirmer ?
Si oui dans les commandes tu dois avoir une commande bind et une commande setReport (je ne peux vérifier le nom exact car je suis sur mon téléphone pour répondre. )
Réveilles ton capteur en appuyant sur le bouton et envoies la commande bind puis setReport. Tu devrais avoir les lux au bout de 10 minutes.
Salut,
oui l’équipement est bien dans abeille (en timeout). J’ai effectué la manipulation mais celà n’a rien changé malheureusement…
pourtant quand je clique sur les commandes, j’ai bien « Action effectuée avec succès », après je ne sais pas si cela veut dire que l’équipement a reçu la commande ou non…
Donc j’ai remis la zigate en inclusion, pressé à nouveau 10sec sur le bouton du capteur. Abeille réagit en me disant qu’il connait déjà l’équipement, etc…
Je viens de voir que maintenant, quand je fais un setReport, j’ai ça dans AbeilleParser :
[2020-10-13 13:54:37][debug] Abeille1, Type=8702/APS Data Confirm Fail, Status=d4 (ZPS_NWK_ENUM_FRAME_IS_BUFFERED->Unicast frame does not have a route available but it is buffered for automatic resend. / https://github.com/fairecasoimeme/ZiGate/issues/207), SrcEndpoint=01, DestEndpoint=01, DestMode=02, DestAddr=e572, SQN=4e
je viens de réaliser quand je fais un « short-adress » :
j’ai comme réponse ça :
or c’est son ancienne adresse (avant que je refasse l’inclusion), sa nouvelle étant :
à moins que je ne me trompe ? son nom n’a rien à voir avec sa short adress ?
Lors de la création la short adress est utilisée.
Normalement si la short address change alors elle est mise à jour dans abeille et si le nom contient l ancienne short address elle est aussi mise à jour.
Mais il se peut qu nouvel équipement soit re créer si toutes les informations n ´ avait pas été récupérées sur le premier équipement. Dans ce cas il y a un ancien équipement dans abeille qui peux être effacer et le nouveau gardé.
En manipulant l équipement physique et en regardant les messages qui remonte dans le log AbeilleParser dans ce cas on peut identifier l’adresse actuellement utilisé par l’équipe physique
Merci de ta réponse,
Je ne vois pas d’ancien équipement ou de doublon…
Qu’est ce que je peux faire pour mon capteur alors tu penses ? je le supprime à nouveau et je réinclus ?
J’ai l’impression d’avoir tout essayé ;(
J’ai supprimé l’équipement, et refais une inclusion. Voici le abeille parser :
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE Start
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE cmd: BindToZigateIlluminance
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE cmd: setReportIlluminanceXiaomi
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE cmd: BindToZigateIlluminance
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE cmd: setReportIlluminanceXiaomi
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:29:59][debug] Type=fct; ===> Configure NE End
[2020-10-14 14:29:59][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=14, PacketType=0100
[2020-10-14 14:29:59][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0045
[2020-10-14 14:29:59][debug] Abeille1, Type=8102/Attribut report, SQN=11, SrcAddr=3bff, EndPoint=01, ClustID=0000, AttrID=0010, AttrStatus=86, AttrDataType=ff, AttrSize=0000, DataByteList=
[2020-10-14 14:30:00][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=d2, PacketType=0045
[2020-10-14 14:30:00][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-10-14 14:30:01][debug] Type=fct; processActionQueue, action: {"when":1602678600,"what":"configureNE","addr":"Abeille1\/3bff"}
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE Start
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE cmd: BindToZigateIlluminance
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE cmd: setReportIlluminanceXiaomi
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE cmd: BindToZigateIlluminance
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE cmd: setReportIlluminanceXiaomi
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:01][debug] Type=fct; ===> Configure NE End
[2020-10-14 14:30:01][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-10-14 14:30:02][debug] Type=fct; processActionQueue, action: {"when":1602678601,"what":"getNE","addr":"Abeille1\/3bff"}
[2020-10-14 14:30:02][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-10-14 14:30:03][debug] Type=fct; processActionQueue, action: {"when":1602678602,"what":"configureNE","addr":"Abeille1\/3bff"}
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE Start
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE cmd: BindToZigateIlluminance
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE cmd: setReportIlluminanceXiaomi
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE cmd: BindToZigateIlluminance
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE cmd: setReportIlluminanceXiaomi
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-10-14 14:30:03][debug] Type=fct; ===> Configure NE End
[2020-10-14 14:30:03][debug] Abeille1, Type=8102/Attribut report, SQN=12, SrcAddr=3bff, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
[2020-10-14 14:30:04][debug] Type=fct; processActionQueue, action: {"when":1602678603,"what":"getNE","addr":"Abeille1\/3bff"}
[2020-10-14 14:30:04][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=d3, PacketType=0043
[2020-10-14 14:30:04][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=15, PacketType=0100
[2020-10-14 14:30:05][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=16, PacketType=0100
[2020-10-14 14:30:05][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=17, PacketType=0100
[2020-10-14 14:30:06][debug] Type=fct; processActionQueue, action: {"when":1602678605,"what":"getNE","addr":"Abeille1\/3bff"}
[2020-10-14 14:30:06][debug] Abeille1, Type=8102/Attribut report, SQN=16, SrcAddr=3bff, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01
[2020-10-14 14:30:06][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=18, PacketType=0100
[2020-10-14 14:30:06][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=d4, PacketType=0043
[2020-10-14 14:30:06][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=20, PacketType=0530
[2020-10-14 14:30:06][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=d5, PacketType=0043
[2020-10-14 14:30:06][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=19, PacketType=0120
[EDIT]
On dirait que ça marche cette fois ! Mais je n’ai pas compris pourquoi…
[EDIT 2]
Cette fois j’ai fait différemment :
Peut-etre que le fait de ne passer la zigate en inclusion qu’après le premier reset à joué ?
En tout cas mainternant j’ai une rémontée alors que jusque là (malgré beaucoup de suppression/réinclusion du capteur) je n’avais rien
Bonne nouvelle.
Bonjour,
Hélas le soucis est revenu…
le capteur est resté sur 1 Lux plusieurs jours.
J’ai essayé plusieurs fois de le supprimer puis de le réinclure, mais à chaque fois c’est pareil : l’inclusion marche, le capteur répond une fois, puis plus rien…
J’en ai commandé un deuxième pour voir si c’est lui qui déconne, on verra…
Dommage car il a marché nickel pendant 3 mois et d’un coup, retour à la case départ 
J’ai remarqué que la luminosité n’est pas remontée, mais quand j’appuie une fois sur le bouton du capteur, le timestamp se met bien à jour
Salut.
Si le timestamp change alors c’est qu’un message a été reçu du periph.
Peux tu donner la trace AbeilleParser juste apres l’appui sur le bouton ?
Voici la ligne qui apparait dans AbeillePerser.log:
[2021-01-08 13:26:35][debug] Abeille1, Type=8102/Attribut report, SQN=00, Addr=9306, EP=01, ClustId=0000, AttrId=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012, DataByteList=lumi.sen_ill.mgl01, [Modelisation]
Et dans les logs de l’objet (dans la conf abeille) :
[2021-01-08 13:24:58][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-TimeStamp] valeur : 1610108698
[2021-01-08 13:24:58][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-Time] valeur : 2021-01-08 13:24:58
[2021-01-08 13:25:01][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-TimeStamp] valeur : 1610108701
[2021-01-08 13:25:01][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-Time] valeur : 2021-01-08 13:25:01
[2021-01-08 13:25:05][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-TimeStamp] valeur : 1610108705
[2021-01-08 13:25:05][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-Time] valeur : 2021-01-08 13:25:05
[2021-01-08 13:26:35][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Link Quality] valeur : 126
[2021-01-08 13:26:35][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-TimeStamp] valeur : 1610108795
[2021-01-08 13:26:35][INFO] : Evènement sur la commande [Maison][Abeille1-9306][Time-Time] valeur : 2021-01-08 13:26:35
j’espère que c’est bien cela que tu me demandais ?
En fait le timestamp évolue bien tout seul (sans que j’appuie sur le bouton du capteur j’entend)
Donc c’est vraiment la luminosité qui ne remonte pas
Cette ligne apparait pendant l’inclusion non ?
En dehors de l’inclusion je vois ce genre de trace avec mon capteur, donc une info toutes les 10mins sans aucune action sur le capteur.
Est ce que c’était le cas apres inclusion pour toi ?
[2021-01-08 17:04:29][debug] Abeille1, Type=8102/Attribut report, SQN=00, Addr=8AE6, EP=01, ClustId=0400, AttrId=0000, AttrStatus=00, AttrDataType=21, AttrSize=0002
[2021-01-08 17:14:49][debug] Abeille1, Type=8102/Attribut report, SQN=17, Addr=8AE6, EP=01, ClustId=0400, AttrId=0000, AttrStatus=00, AttrDataType=21, AttrSize=0002
[2021-01-08 17:24:44][debug] Abeille1, Type=8102/Attribut report, SQN=18, Addr=8AE6, EP=01, ClustId=0400, AttrId=0000, AttrStatus=00, AttrDataType=21, AttrSize=0002
Merci de ta réponse. Oui effectivement, j’avais tout comme toi celle ligne régulièrement. Je parle au passé car maintenant je n’a plus rien du tout, et le capteur ne répond plus…
Piles neuves ?