Bonjour,
@limad44: Je viens de mettre à jour le plugin naenergy suite à la toute dernière maj.
Pas mal d’anomalies constatées :
Merci de prendre en compte. Je peux te fournir des logs si tu le souhaites.
J’ajoute que je suis en Jeedom 4.1.16
Le log au cas ou avec trois opérations successives :
[2020-12-02 09:43:03][DEBUG] : execute Action : refresh sur: Thermostat séjour
[2020-12-02 09:43:03][DEBUG] : getClient start
[2020-12-02 09:43:03][DEBUG] : getDataRoom _Homestatus {"id":"5c484cb1f1c1e00a008b4f58","modules":[{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":50},{"id":"04:00:00:11:6a:fe","anticipating":false,"battery_level":3863,"firmware_revision":72,"rf_strength":58,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"rooms":[{"id":"1186812440","anticipating":false,"open_window":false,"reachable":true,"therm_measured_temperature":20.4,"therm_setpoint_temperature":20.5,"therm_setpoint_mode":"schedule","therm_setpoint_start_time":1606898571,"therm_setpoint_end_time":0}]}
[2020-12-02 09:43:04][DEBUG] : *********************** eqlogiq 1 Thermostat séjour ***********************
[2020-12-02 09:43:04][DEBUG] : getDataRoom datahome_modetech: schedule
[2020-12-02 09:43:04][DEBUG] : getDataRoom NAPlug_infos: {"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":50,"firmware":210,"connected":1}
[2020-12-02 09:43:04][DEBUG] : getDataRoom relai-wifi_strength: 50
[2020-12-02 09:43:04][DEBUG] : getDataRoom relai-rf: rf_status=>low rf_strength=>109 set to: 84
[2020-12-02 09:43:04][DEBUG] : getDataRoom * Thermostat séjour * Variation consigne en 10min: 13.5°
[2020-12-02 09:43:04][DEBUG] : getDataRoom ***** home_modetech: schedule
[2020-12-02 09:43:04][DEBUG] : getDataRoom ***** room_modetech: schedule
[2020-12-02 09:43:04][DEBUG] : getDataRoom ***** statustr: Allumé - Confort Jusqu'à 02-12-2020 16:00
[2020-12-02 09:43:04][DEBUG] : getDataRoom temperature_outdoor 6.7
[2020-12-02 09:43:04][INFO] : postSave started *********Thermostat séjour-
[2020-12-02 09:43:04][DEBUG] : *********** fin eqlogiq 1 Thermostat séjour **********
[2020-12-02 09:43:04][DEBUG] : *
[2020-12-02 09:43:04][DEBUG] : setting home-cmd... (Confort Ruisseau - Home|5c484cb1f1c1e00a008b4f58 )
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) home_modetech set: to schedule
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) datahome_modetech set: to schedule
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) listplanning set: to 5c484cb1f1c1e00a008b4f59|Standard;5c49da379daf380c008b7f4e|A la maison;5dd2f7e841a1131b3a0d131d|Travaux
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) nowplanning set: to A la maison
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) nowplanid set: to 5c49da379daf380c008b7f4e
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) boiler_anticipating set: to 0
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) boiler_status set: to 1
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) wifi_strength set: to 50
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) home_rf set: to 84
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) setpointmode_endtime set: to 02-12-2020 16:00
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) hg_temp set: to 7
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) away_temp set: to 12
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) eqmodules set: to [{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":50,"firmware":210,"connected":1,"rfpower":"low"}]
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) thermPriority Undefined cmd
[2020-12-02 09:43:04][DEBUG] : home-cmd (Confort Ruisseau) temperature_outdoor set: to 6.7
[2020-12-02 09:43:04][DEBUG] : *
[2020-12-02 09:43:04][DEBUG] : getDataRoom global: {"5c484cb1f1c1e00a008b4f58":{"SyncTime":"02-12-2020 09:43","1186812440|5c484cb1f1c1e00a008b4f58":{"eqname":"Thermostat s\u00e9jour","modules":[{"id":"04:00:00:11:6a:fe","name":"Thermostat","last_seen":1606898568,"room":"1186812440","anticipating":false,"battery_level":3863,"firmware_revision":72,"rf_strength":58,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"listprofil":"Confort;20.5|Nuit;17|Confort+;20.5|\u00c9co;16","nowprofil_temp":"20.5","nowprofil":"Confort","nextprofil_temp":"20.5","nextprofil":"Confort+-20.5","profil_endtime":"02-12-2020 16:00","nextprofil_delay":376,"nextprofil_tendance":0,"SyncTime":"02-12-2020 09:43","temperature":20.4,"varTempIn":0,"consigne":20.5,"varCons":13.5,"open_window":0,"room_anticipating":0,"powerRequest":true,"actif":1,"room_modetech":"schedule","setpointmode_starttime":"02-12-2020 09:42","setpointmode_endtime":"02-12-2020 16:00","statustr":"Allum\u00e9 - Confort Jusqu'\u00e0 02-12-2020 16:00","mode_str":"Schedule Jusqu'\u00e0 02-12-2020 16:00","eqmodules":"[{\"id\":\"04:00:00:11:6a:fe\",\"name\":\"Thermostat\",\"last_seen\":1606898568,\"room\":\"1186812440\",\"anticipating\":false,\"battery_level\":3863,\"firmware_revision\":72,\"rf_strength\":58,\"boiler_status\":true,\"type\":\"NATherm1\",\"boiler_valve_comfort_boost\":false,\"reachable\":true,\"bridge\":\"70:ee:50:11:cd:2c\",\"battery_state\":\"high\",\"rfpower\":\"full\",\"battery_percent\":58}]","batterie":58,"room_rf":"full"},"Home|5c484cb1f1c1e00a008b4f58":{"home_name":"Confort Ruisseau","spm_duaration":null,"datahome_modetech":"schedule","thermPriority":"eco","temperature_outdoor":6.7,"modules":{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":50,"firmware":210,"connected":1},"wifi_strength":50,"home_rf":84,"home_rfstatus":"low","eqmodules":"[{\"id\":\"70:ee:50:11:cd:2c\",\"type\":\"NAPlug\",\"firmware_revision\":210,\"plug_connected_boiler\":1,\"rf_strength\":109,\"wifi_strength\":50,\"firmware\":210,\"connected\":1,\"rfpower\":\"low\"}]","modules_bridged":[{"id":"04:00:00:11:6a:fe","name":"Thermostat","last_seen":1606898568,"room":"1186812440","anticipating":false,"battery_level":3863,"firmware_revision":72,"rf_strength":58,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"boiler_status":1,"boiler_anticipating":0,"therm_comfortboost":0,"listplanning":"5c484cb1f1c1e00a008b4f59|Standard;5c49da379daf380c008b7f4e|A la maison;5dd2f7e841a1131b3a0d131d|Travaux","nowplanning":"A la maison","nowplanid":"5c49da379daf380c008b7f4e","away_temp":12,"hg_temp":7,"plan_type":"therm","rooms_anticipating":{"1186812440":0},"rooms_powerRequest":{"1186812440":1},"home_modetech":"schedule","home_modetech_date":"02-12-2020 09:42","setpointmode_endtime":"02-12-2020 16:00"}}}
[2020-12-02 09:43:04][DEBUG] : execute Fin cmd-Action : refresh
[2020-12-02 09:43:14][DEBUG] : execute Action : setmode sur: Confort Ruisseau
[2020-12-02 09:43:14][DEBUG] : changeHomeTherm action: away- endtime: - sur: Confort Ruisseau
[2020-12-02 09:43:14][DEBUG] : getClient start
[2020-12-02 09:43:15][DEBUG] : changeHomeTherm action: set-away Result: "ok"
[2020-12-02 09:43:15][DEBUG] : execute Fin cmd-Action : setmode
[2020-12-02 09:43:15][DEBUG] : triggerEvent start : {"naEnergie_id":"Home|5c484cb1f1c1e00a008b4f58","event_id":"2727","value":"Home|5c484cb1f1c1e00a008b4f58 ** Mode set to away","datetime":"2020-12-02 09:43:15","listener_id":"1"}
[2020-12-02 09:43:18][DEBUG] : triggerEvent Msg : Confort Ruisseau[Mode set to away]
[2020-12-02 09:43:18][DEBUG] : getDataRoom Eq to sync: 1186812440|5c484cb1f1c1e00a008b4f58
[2020-12-02 09:43:18][DEBUG] : getClient start
[2020-12-02 09:43:20][DEBUG] : getDataRoom _Homestatus {"id":"5c484cb1f1c1e00a008b4f58","modules":[{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":55},{"id":"04:00:00:11:6a:fe","anticipating":false,"battery_level":3865,"firmware_revision":72,"rf_strength":59,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"rooms":[{"id":"1186812440","anticipating":false,"open_window":false,"reachable":true,"therm_measured_temperature":20.4,"therm_setpoint_temperature":20.5,"therm_setpoint_mode":"schedule","therm_setpoint_start_time":1606898595,"therm_setpoint_end_time":0}]}
[2020-12-02 09:43:20][DEBUG] : *********************** eqlogiq 1 Thermostat séjour ***********************
[2020-12-02 09:43:20][DEBUG] : getDataRoom datahome_modetech: schedule
[2020-12-02 09:43:20][DEBUG] : getDataRoom NAPlug_infos: {"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":51,"firmware":210,"connected":1}
[2020-12-02 09:43:20][DEBUG] : getDataRoom relai-wifi_strength: 51
[2020-12-02 09:43:20][DEBUG] : getDataRoom relai-rf: rf_status=>low rf_strength=>109 set to: 84
[2020-12-02 09:43:20][DEBUG] : getDataRoom * Thermostat séjour * Variation consigne en 10min: 0°
[2020-12-02 09:43:20][DEBUG] : getDataRoom ***** home_modetech: schedule
[2020-12-02 09:43:20][DEBUG] : getDataRoom ***** room_modetech: schedule
[2020-12-02 09:43:20][DEBUG] : getDataRoom ***** statustr: Allumé - Confort Jusqu'à 02-12-2020 16:00
[2020-12-02 09:43:20][DEBUG] : getDataRoom temperature_outdoor 6.7
[2020-12-02 09:43:20][INFO] : postSave started *********Thermostat séjour-
[2020-12-02 09:43:20][DEBUG] : *********** fin eqlogiq 1 Thermostat séjour **********
[2020-12-02 09:43:20][DEBUG] : *
[2020-12-02 09:43:20][DEBUG] : setting home-cmd... (Confort Ruisseau - Home|5c484cb1f1c1e00a008b4f58 )
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) home_modetech set: to schedule
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) datahome_modetech set: to schedule
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) listplanning set: to 5c484cb1f1c1e00a008b4f59|Standard;5c49da379daf380c008b7f4e|A la maison;5dd2f7e841a1131b3a0d131d|Travaux
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) nowplanning set: to A la maison
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) nowplanid set: to 5c49da379daf380c008b7f4e
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) boiler_anticipating set: to 0
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) boiler_status set: to 1
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) wifi_strength set: to 51
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) home_rf set: to 84
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) setpointmode_endtime set: to 02-12-2020 16:00
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) hg_temp set: to 7
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) away_temp set: to 12
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) eqmodules set: to [{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":51,"firmware":210,"connected":1,"rfpower":"low"}]
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) thermPriority Undefined cmd
[2020-12-02 09:43:20][DEBUG] : home-cmd (Confort Ruisseau) temperature_outdoor set: to 6.7
[2020-12-02 09:43:20][DEBUG] : *
[2020-12-02 09:43:20][DEBUG] : getDataRoom global: {"5c484cb1f1c1e00a008b4f58":{"SyncTime":"02-12-2020 09:43","1186812440|5c484cb1f1c1e00a008b4f58":{"eqname":"Thermostat s\u00e9jour","modules":[{"id":"04:00:00:11:6a:fe","name":"Thermostat","last_seen":1606898589,"room":"1186812440","anticipating":false,"battery_level":3865,"firmware_revision":72,"rf_strength":59,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"listprofil":"Confort;20.5|Nuit;17|Confort+;20.5|\u00c9co;16","nowprofil_temp":"20.5","nowprofil":"Confort","nextprofil_temp":"20.5","nextprofil":"Confort+-20.5","profil_endtime":"02-12-2020 16:00","nextprofil_delay":376,"nextprofil_tendance":0,"SyncTime":"02-12-2020 09:43","temperature":20.4,"varTempIn":0,"consigne":20.5,"varCons":0,"open_window":0,"room_anticipating":0,"powerRequest":true,"actif":1,"room_modetech":"schedule","setpointmode_starttime":"02-12-2020 09:43","setpointmode_endtime":"02-12-2020 16:00","statustr":"Allum\u00e9 - Confort Jusqu'\u00e0 02-12-2020 16:00","mode_str":"Schedule Jusqu'\u00e0 02-12-2020 16:00","eqmodules":"[{\"id\":\"04:00:00:11:6a:fe\",\"name\":\"Thermostat\",\"last_seen\":1606898589,\"room\":\"1186812440\",\"anticipating\":false,\"battery_level\":3865,\"firmware_revision\":72,\"rf_strength\":59,\"boiler_status\":true,\"type\":\"NATherm1\",\"boiler_valve_comfort_boost\":false,\"reachable\":true,\"bridge\":\"70:ee:50:11:cd:2c\",\"battery_state\":\"high\",\"rfpower\":\"full\",\"battery_percent\":58}]","batterie":58,"room_rf":"full"},"Home|5c484cb1f1c1e00a008b4f58":{"home_name":"Confort Ruisseau","spm_duaration":null,"datahome_modetech":"schedule","thermPriority":"eco","temperature_outdoor":6.7,"modules":{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":51,"firmware":210,"connected":1},"wifi_strength":51,"home_rf":84,"home_rfstatus":"low","eqmodules":"[{\"id\":\"70:ee:50:11:cd:2c\",\"type\":\"NAPlug\",\"firmware_revision\":210,\"plug_connected_boiler\":1,\"rf_strength\":109,\"wifi_strength\":51,\"firmware\":210,\"connected\":1,\"rfpower\":\"low\"}]","modules_bridged":[{"id":"04:00:00:11:6a:fe","name":"Thermostat","last_seen":1606898589,"room":"1186812440","anticipating":false,"battery_level":3865,"firmware_revision":72,"rf_strength":59,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"boiler_status":1,"boiler_anticipating":0,"therm_comfortboost":0,"listplanning":"5c484cb1f1c1e00a008b4f59|Standard;5c49da379daf380c008b7f4e|A la maison;5dd2f7e841a1131b3a0d131d|Travaux","nowplanning":"A la maison","nowplanid":"5c49da379daf380c008b7f4e","away_temp":12,"hg_temp":7,"plan_type":"therm","rooms_anticipating":{"1186812440":0},"rooms_powerRequest":{"1186812440":1},"home_modetech":"schedule","home_modetech_date":"01-01-1970 01:00","setpointmode_endtime":"02-12-2020 16:00"}}}
[2020-12-02 09:43:34][DEBUG] : execute Action : setmode sur: Confort Ruisseau
[2020-12-02 09:43:34][DEBUG] : changeHomeTherm action: hg- endtime: - sur: Confort Ruisseau
[2020-12-02 09:43:34][DEBUG] : getClient start
[2020-12-02 09:43:35][DEBUG] : changeHomeTherm action: set-hg Result: "ok"
[2020-12-02 09:43:35][DEBUG] : execute Fin cmd-Action : setmode
[2020-12-02 09:43:35][DEBUG] : triggerEvent start : {"naEnergie_id":"Home|5c484cb1f1c1e00a008b4f58","event_id":"2727","value":"Home|5c484cb1f1c1e00a008b4f58 ** Mode set to hg","datetime":"2020-12-02 09:43:35","listener_id":"1"}
[2020-12-02 09:43:38][DEBUG] : triggerEvent Msg : Confort Ruisseau[Mode set to hg]
[2020-12-02 09:43:38][DEBUG] : getDataRoom Eq to sync: 1186812440|5c484cb1f1c1e00a008b4f58
[2020-12-02 09:43:38][DEBUG] : getClient start
[2020-12-02 09:43:39][DEBUG] : getDataRoom _Homestatus {"id":"5c484cb1f1c1e00a008b4f58","modules":[{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":54},{"id":"04:00:00:11:6a:fe","anticipating":false,"battery_level":3863,"firmware_revision":72,"rf_strength":59,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"rooms":[{"id":"1186812440","anticipating":false,"open_window":false,"reachable":true,"therm_measured_temperature":20.4,"therm_setpoint_temperature":20.5,"therm_setpoint_mode":"schedule","therm_setpoint_start_time":1606898615,"therm_setpoint_end_time":0}]}
[2020-12-02 09:43:39][DEBUG] : *********************** eqlogiq 1 Thermostat séjour ***********************
[2020-12-02 09:43:39][DEBUG] : getDataRoom datahome_modetech: schedule
[2020-12-02 09:43:39][DEBUG] : getDataRoom NAPlug_infos: {"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":50,"firmware":210,"connected":1}
[2020-12-02 09:43:39][DEBUG] : getDataRoom relai-wifi_strength: 50
[2020-12-02 09:43:39][DEBUG] : getDataRoom relai-rf: rf_status=>low rf_strength=>109 set to: 84
[2020-12-02 09:43:39][DEBUG] : getDataRoom * Thermostat séjour * Variation consigne en 10min: 0°
[2020-12-02 09:43:39][DEBUG] : getDataRoom ***** home_modetech: schedule
[2020-12-02 09:43:39][DEBUG] : getDataRoom ***** room_modetech: schedule
[2020-12-02 09:43:39][DEBUG] : getDataRoom ***** statustr: Allumé - Confort Jusqu'à 02-12-2020 16:00
[2020-12-02 09:43:39][DEBUG] : getDataRoom temperature_outdoor 6.7
[2020-12-02 09:43:39][INFO] : postSave started *********Thermostat séjour-
[2020-12-02 09:43:39][DEBUG] : *********** fin eqlogiq 1 Thermostat séjour **********
[2020-12-02 09:43:39][DEBUG] : *
[2020-12-02 09:43:39][DEBUG] : setting home-cmd... (Confort Ruisseau - Home|5c484cb1f1c1e00a008b4f58 )
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) home_modetech set: to schedule
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) datahome_modetech set: to schedule
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) listplanning set: to 5c484cb1f1c1e00a008b4f59|Standard;5c49da379daf380c008b7f4e|A la maison;5dd2f7e841a1131b3a0d131d|Travaux
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) nowplanning set: to A la maison
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) nowplanid set: to 5c49da379daf380c008b7f4e
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) boiler_anticipating set: to 0
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) boiler_status set: to 1
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) wifi_strength set: to 50
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) home_rf set: to 84
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) setpointmode_endtime set: to 02-12-2020 16:00
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) hg_temp set: to 7
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) away_temp set: to 12
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) eqmodules set: to [{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":50,"firmware":210,"connected":1,"rfpower":"low"}]
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) thermPriority Undefined cmd
[2020-12-02 09:43:39][DEBUG] : home-cmd (Confort Ruisseau) temperature_outdoor set: to 6.7
[2020-12-02 09:43:39][DEBUG] : *
[2020-12-02 09:43:39][DEBUG] : getDataRoom global: {"5c484cb1f1c1e00a008b4f58":{"SyncTime":"02-12-2020 09:43","1186812440|5c484cb1f1c1e00a008b4f58":{"eqname":"Thermostat s\u00e9jour","modules":[{"id":"04:00:00:11:6a:fe","name":"Thermostat","last_seen":1606898611,"room":"1186812440","anticipating":false,"battery_level":3863,"firmware_revision":72,"rf_strength":59,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"listprofil":"Confort;20.5|Nuit;17|Confort+;20.5|\u00c9co;16","nowprofil_temp":"20.5","nowprofil":"Confort","nextprofil_temp":"20.5","nextprofil":"Confort+-20.5","profil_endtime":"02-12-2020 16:00","nextprofil_delay":376,"nextprofil_tendance":0,"SyncTime":"02-12-2020 09:43","temperature":20.4,"varTempIn":0,"consigne":20.5,"varCons":0,"open_window":0,"room_anticipating":0,"powerRequest":true,"actif":1,"room_modetech":"schedule","setpointmode_starttime":"02-12-2020 09:43","setpointmode_endtime":"02-12-2020 16:00","statustr":"Allum\u00e9 - Confort Jusqu'\u00e0 02-12-2020 16:00","mode_str":"Schedule Jusqu'\u00e0 02-12-2020 16:00","eqmodules":"[{\"id\":\"04:00:00:11:6a:fe\",\"name\":\"Thermostat\",\"last_seen\":1606898611,\"room\":\"1186812440\",\"anticipating\":false,\"battery_level\":3863,\"firmware_revision\":72,\"rf_strength\":59,\"boiler_status\":true,\"type\":\"NATherm1\",\"boiler_valve_comfort_boost\":false,\"reachable\":true,\"bridge\":\"70:ee:50:11:cd:2c\",\"battery_state\":\"high\",\"rfpower\":\"full\",\"battery_percent\":58}]","batterie":58,"room_rf":"full"},"Home|5c484cb1f1c1e00a008b4f58":{"home_name":"Confort Ruisseau","spm_duaration":null,"datahome_modetech":"schedule","thermPriority":"eco","temperature_outdoor":6.7,"modules":{"id":"70:ee:50:11:cd:2c","type":"NAPlug","firmware_revision":210,"plug_connected_boiler":1,"rf_strength":109,"wifi_strength":50,"firmware":210,"connected":1},"wifi_strength":50,"home_rf":84,"home_rfstatus":"low","eqmodules":"[{\"id\":\"70:ee:50:11:cd:2c\",\"type\":\"NAPlug\",\"firmware_revision\":210,\"plug_connected_boiler\":1,\"rf_strength\":109,\"wifi_strength\":50,\"firmware\":210,\"connected\":1,\"rfpower\":\"low\"}]","modules_bridged":[{"id":"04:00:00:11:6a:fe","name":"Thermostat","last_seen":1606898611,"room":"1186812440","anticipating":false,"battery_level":3863,"firmware_revision":72,"rf_strength":59,"boiler_status":true,"type":"NATherm1","boiler_valve_comfort_boost":false,"reachable":true,"bridge":"70:ee:50:11:cd:2c","battery_state":"high"}],"boiler_status":1,"boiler_anticipating":0,"therm_comfortboost":0,"listplanning":"5c484cb1f1c1e00a008b4f59|Standard;5c49da379daf380c008b7f4e|A la maison;5dd2f7e841a1131b3a0d131d|Travaux","nowplanning":"A la maison","nowplanid":"5c49da379daf380c008b7f4e","away_temp":12,"hg_temp":7,"plan_type":"therm","rooms_anticipating":{"1186812440":0},"rooms_powerRequest":{"1186812440":1},"home_modetech":"schedule","home_modetech_date":"01-01-1970 01:00","setpointmode_endtime":"02-12-2020 16:00"}}}
Euh je ne reproduits aucune de ces anomalies !
Tu utilises la tuile fournis dans le plugin ?
On clique sur le bouton rouge « off »
Les logs montrent que les actions s’exécutent correctement, mais le serveur a du retard à les appliquer, il ya pourtant un temps de pause entre la réponse ‹ ok › et la synchronisation.
J’utilise la tuile fournie pas le plugin en effet.
Le log a l’air d’indiquer en effet que les opérations hg et absence on bien fonctionné (« ok ») en même temps le statut est resté en confort comme indiqué. As tu testé en v4 ?
J’ai fait un getHomeStatus et un SetThermMode depuis Netatmo Connect | Energy API Documentation. Je me suis mis en absence, hg ou schedule en param du setthermode et ça roule…
Pour le refresh :
Oui v4.
Essaye depuis le plugin de modifierle mode et regarde en suite sur l’app Web ou sur le site c’est la commande s’exécute
J’ai retester plusieurs fois aujourd’hui mais je viens de reproduire. C’est bien un problème de retard de l’api.
Après quelques secondes un refrech et tt est bon
Donc pas la faute du plugin
Je ne doute pas que ça marche bien chez toi.
J’ai refait un test en cliquant sur absence. Après 15 mn je suis toujours en mode schedule. La version précédente ne me posait ce type de problème.
Je suis en V4.1.16 plus précisément.
Les changements opéres entre les deux versions ne peuvent pas justifier un tel dysfonctionnement.
As tu essayé ctr-F5 ou un autre navigateur ?
J’ai demandé des retours sur le fil principal du plugin.
D’ailleurs il vaut mieux que tu postes des difficultés sur ce fil c’est plus facile d’avoir des réponses.
Oui j’ai totalement vidé le cache du navigateur (command-shift-R sur mac/chrome).
J’ai également essayé sur firefox et safari et malheureusement ça n’est pas mieux.
Donne moi le lien sur ton post pour demander des retours, je me rallierai à une discussion plus générale s’il en était.
Désolé pour toi, en plus je suis en déplacement je peux pas faire grand chose de mon téléphone.
Peut-être si @mich0111 passe par là, il pourra nous dire
Bonsoir,
Je viens de tomber sur ton message.
Désolé je n’ai pas trop le temps en ce moment beaucoup de travaux en cours, je ne me connecte que rarement.
Je ne me vois pas demander à mon épouse de jouer avec les commandes du chauffage.
Les températures devenant frisquettes, je vais me faire renvoyer dans mes buts.
Tant qu’il fait froid, je ne prends pas le risque de jouer avec le Netatmo.
Si ça peut attendre quelques jours, le redoux est annoncé, je me ferais un plaisir de faire les tests de mon côté.
Bonne fin de soirée
Bonjour @mich0111,
Je ne suis pas au pièce. De toute façon je m’absente pas avant le 15/12, confinement oblige 
Merci de te proposer en tous cas, on en reparle…
A bientôt
En attendant d’avoir plus de retour et d’investigation pour comprendre le problème, je ne suis pas bloqué, la web app de netatmo marche bien de toute façon 
On en reparle quand tu seras à nouveau dispo…
Bonjour,
je viens d’installer la MAJ, je peux aider si besoin en montrant mes logs (il faudra juste me dire sur quelle action).
Je n’ai aucun problème à l’heure actuelle.
Je suis en v4.1.16
Version PHP 7.3.19-1~deb10u1
Version: OS Linux raspberrypi 5.4.72-v7l+ #1356 SMP Thu Oct 22 13:57:51 BST 2020 armv7l GNU/Linux [10.6]
Bonjour,
Pas de souci donc en cliquant sur « absence » ou « hg » ?