{\rtf1\ansi\ansicpg1252\cocoartf2639
\cocoatextscaling0\cocoaplatform0{\fonttbl\f0\fnil\fcharset0 Menlo-Bold;\f1\fnil\fcharset0 Menlo-Regular;}
{\colortbl;\red255\green255\blue255;\red57\green192\blue38;\red0\green0\blue0;\red86\green32\blue244;
\red170\green171\blue37;\red202\green51\blue35;}
{\*\expandedcolortbl;;\cssrgb\c25706\c77963\c19557;\csgray\c0;\cssrgb\c41681\c25958\c96648;
\cssrgb\c72331\c71682\c18599;\cssrgb\c83899\c28663\c18026;}
\paperw11900\paperh16840\margl1440\margr1440\vieww11520\viewh8400\viewkind0
\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\pardirnatural\partightenfactor0

\f0\b\fs22 \cf2 \CocoaLigature0 pi@rspi4
\f1\b0 \cf3 :
\f0\b \cf4 ~ $
\f1\b0 \cf3  dmesg\
\cf2 [    0.000000] \cf3 Booting Linux on physical CPU 0x0000000000 [0x410fd083]\
\cf2 [    0.000000] \cf3 Linux version 6.1.21-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023\
\cf2 [    0.000000] \cf5 random\cf3 : crng init done\
\cf2 [    0.000000] \cf5 Machine model\cf3 : Raspberry Pi 4 Model B Rev 1.5\
\cf2 [    0.000000] \cf5 efi\cf3 : UEFI not found.\
\cf2 [    0.000000] \cf5 Reserved memory\cf3 : created CMA memory pool at 0x000000000ec00000, size 512 MiB\
\cf2 [    0.000000] \cf5 OF\cf3 : reserved mem: initialized node linux,cma, compatible id shared-dma-pool\
\cf2 [    0.000000] \cf3 Zone ranges:\
\cf2 [    0.000000] \cf3   DMA      [mem 0x0000000000000000-0x000000003fffffff]\
\cf2 [    0.000000] \cf3   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]\
\cf2 [    0.000000] \cf3   Normal   empty\
\cf2 [    0.000000] \cf3 Movable zone start for each node\
\cf2 [    0.000000] \cf3 Early memory node ranges\
\cf2 [    0.000000] \cf5   node   0\cf3 : [mem 0x0000000000000000-0x000000003b2fffff]\
\cf2 [    0.000000] \cf5   node   0\cf3 : [mem 0x0000000040000000-0x00000000fbffffff]\
\cf2 [    0.000000] \cf3 Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]\
\cf2 [    0.000000] \cf5 On node 0, zone DMA32\cf3 : 19712 pages in unavailable ranges\
\cf2 [    0.000000] \cf5 On node 0, zone DMA32\cf3 : 16384 pages in unavailable ranges\
\cf2 [    0.000000] \cf5 percpu\cf3 : Embedded 29 pages/cpu s78504 r8192 d32088 u118784\
\cf2 [    0.000000] \cf5 pcpu-alloc\cf3 : s78504 r8192 d32088 u118784 alloc=29*4096\
\cf2 [    0.000000] \cf5 pcpu-alloc\cf3 : [0] 0 [0] 1 [0] 2 [0] 3 \
\cf2 [    0.000000] \cf3 Detected PIPT I-cache on CPU0\
\cf2 [    0.000000] \cf5 CPU features\cf3 : detected: Spectre-v2\
\cf2 [    0.000000] \cf5 CPU features\cf3 : detected: Spectre-v3a\
\cf2 [    0.000000] \cf5 CPU features\cf3 : detected: Spectre-v4\
\cf2 [    0.000000] \cf5 CPU features\cf3 : detected: Spectre-BHB\
\cf2 [    0.000000] \cf5 CPU features\cf3 : kernel page table isolation forced ON by KASLR\
\cf2 [    0.000000] \cf5 CPU features\cf3 : detected: Kernel page table isolation (KPTI)\
\cf2 [    0.000000] \cf5 CPU features\cf3 : detected: ARM erratum 1742098\
\cf2 [    0.000000] \cf5 CPU features\cf3 : detected: ARM errata 1165522, 1319367, or 1530923\
\cf2 [    0.000000] \cf5 alternatives\cf3 : applying boot alternatives\
\cf2 [    0.000000] \cf5 Built 1 zonelists, mobility grouping on.  Total pages\cf3 : 996660\
\cf2 [    0.000000] \cf5 Kernel command line\cf3 : coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:6D:A3:C7 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=2b336bd4-02 rootfstype=ext4 fsck.repair=yes rootwait\
\cf2 [    0.000000] \cf5 Dentry cache hash table entries\cf3 : 524288 (order: 10, 4194304 bytes, linear)\
\cf2 [    0.000000] \cf5 Inode-cache hash table entries\cf3 : 262144 (order: 9, 2097152 bytes, linear)\
\cf2 [    0.000000] \cf5 mem auto-init\cf3 : stack:off, heap alloc:off, heap free:off\
\cf2 [    0.000000] \cf5 software IO TLB\cf3 : area num 4.\
\cf2 [    0.000000] \cf5 software IO TLB\cf3 : mapped [mem 0x0000000037300000-0x000000003b300000] (64MB)\
\cf2 [    0.000000] \cf5 Memory\cf3 : 3355924K/4049920K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 169708K reserved, 524288K cma-reserved)\
\cf2 [    0.000000] \cf5 SLUB\cf3 : HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1\
\cf2 [    0.000000] \cf5 ftrace\cf3 : allocating 39744 entries in 156 pages\
\cf2 [    0.000000] \cf5 ftrace\cf3 : allocated 156 pages with 4 groups\
\cf2 [    0.000000] \cf3 trace event string verifier disabled\
\cf2 [    0.000000] \cf5 rcu\cf3 : Preemptible hierarchical RCU implementation.\
\cf2 [    0.000000] \cf5 rcu\cf3 : 	RCU event tracing is enabled.\
\cf2 [    0.000000] \cf5 rcu\cf3 : 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.\
\cf2 [    0.000000] \cf3 	Trampoline variant of Tasks RCU enabled.\
\cf2 [    0.000000] \cf3 	Rude variant of Tasks RCU enabled.\
\cf2 [    0.000000] \cf3 	Tracing variant of Tasks RCU enabled.\
\cf2 [    0.000000] \cf5 rcu\cf3 : RCU calculated value of scheduler-enlistment delay is 25 jiffies.\
\cf2 [    0.000000] \cf5 rcu\cf3 : Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4\
\cf2 [    0.000000] \cf5 NR_IRQS\cf3 : 64, nr_irqs: 64, preallocated irqs: 0\
\cf2 [    0.000000] \cf5 Root IRQ handler\cf3 : gic_handle_irq\
\cf2 [    0.000000] \cf5 GIC\cf3 : Using split EOI/Deactivate mode\
\cf2 [    0.000000] \cf5 rcu\cf3 : srcu_init: Setting srcu_struct sizes based on contention.\
\cf2 [    0.000000] \cf5 arch_timer\cf3 : cp15 timer(s) running at 54.00MHz (phys).\
\cf2 [    0.000000] \cf5 clocksource\cf3 : arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns\
\cf2 [    0.000001] \cf5 sched_clock\cf3 : 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns\
\cf2 [    0.000310] \cf5 Console\cf3 : colour dummy device 80x25\
\cf2 [    0.000907] \cf5 printk\cf3 : console [tty1] enabled\
\cf2 [    0.000976] \cf3 Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)\
\cf2 [    0.001017] \cf5 pid_max\cf3 : default: 32768 minimum: 301\
\cf2 [    0.001160] \cf5 LSM\cf3 : Security Framework initializing\
\cf2 [    0.001389] \cf5 Mount-cache hash table entries\cf3 : 8192 (order: 4, 65536 bytes, linear)\
\cf2 [    0.001476] \cf5 Mountpoint-cache hash table entries\cf3 : 8192 (order: 4, 65536 bytes, linear)\
\cf2 [    0.002780] \cf5 cgroup\cf3 : Disabling memory control group subsystem\
\cf2 [    0.005051] \cf5 cblist_init_generic\cf3 : Setting adjustable number of callback queues.\
\cf2 [    0.005088] \cf5 cblist_init_generic\cf3 : Setting shift to 2 and lim to 1.\
\cf2 [    0.005282] \cf5 cblist_init_generic\cf3 : Setting shift to 2 and lim to 1.\
\cf2 [    0.005475] \cf5 cblist_init_generic\cf3 : Setting shift to 2 and lim to 1.\
\cf2 [    0.005940] \cf5 rcu\cf3 : Hierarchical SRCU implementation.\
\cf2 [    0.005965] \cf5 rcu\cf3 : 	Max phase no-delay instances is 1000.\
\cf2 [    0.007288] \cf3 EFI services will not be available.\
\cf2 [    0.007835] \cf5 smp\cf3 : Bringing up secondary CPUs ...\
\cf2 [    0.009002] \cf3 Detected PIPT I-cache on CPU1\
\cf2 [    0.009162] \cf5 CPU1\cf3 : Booted secondary processor 0x0000000001 [0x410fd083]\
\cf2 [    0.010322] \cf3 Detected PIPT I-cache on CPU2\
\cf2 [    0.010445] \cf5 CPU2\cf3 : Booted secondary processor 0x0000000002 [0x410fd083]\
\cf2 [    0.011570] \cf3 Detected PIPT I-cache on CPU3\
\cf2 [    0.011698] \cf5 CPU3\cf3 : Booted secondary processor 0x0000000003 [0x410fd083]\
\cf2 [    0.011845] \cf5 smp\cf3 : Brought up 1 node, 4 CPUs\
\cf2 [    0.011981] \cf5 SMP\cf3 : Total of 4 processors activated.\
\cf2 [    0.012003] \cf5 CPU features\cf3 : detected: 32-bit EL0 Support\
\cf2 [    0.012021] \cf5 CPU features\cf3 : detected: 32-bit EL1 Support\
\cf2 [    0.012042] \cf5 CPU features\cf3 : detected: CRC32 instructions\
\cf2 [    0.012187] \cf5 CPU\cf3 : All CPU(s) started at EL2\
\cf2 [    0.012222] \cf5 alternatives\cf3 : applying system-wide alternatives\
\cf2 [    0.014094] \cf5 devtmpfs\cf3 : initialized\
\cf2 [    0.026044] \cf3 Enabled cp15_barrier support\
\cf2 [    0.026112] \cf3 Enabled setend support\
\cf2 [    0.026350] \cf5 clocksource\cf3 : jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns\
\cf2 [    0.026402] \cf5 futex hash table entries\cf3 : 1024 (order: 4, 65536 bytes, linear)\
\cf2 [    0.040181] \cf5 pinctrl core\cf3 : initialized pinctrl subsystem\
\cf2 [    0.041096] \cf3 DMI not present or invalid.\
\cf2 [    0.041797] \cf5 NET\cf3 : Registered PF_NETLINK/PF_ROUTE protocol family\
\cf2 [    0.045340] \cf5 DMA\cf3 : preallocated 1024 KiB GFP_KERNEL pool for atomic allocations\
\cf2 [    0.045661] \cf5 DMA\cf3 : preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations\
\cf2 [    0.046618] \cf5 DMA\cf3 : preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations\
\cf2 [    0.046731] \cf5 audit\cf3 : initializing netlink subsys (disabled)\
\cf2 [    0.047013] \cf5 audit\cf3 : type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1\
\cf2 [    0.047630] \cf5 thermal_sys\cf3 : Registered thermal governor 'step_wise'\
\cf2 [    0.047723] \cf5 cpuidle\cf3 : using governor menu\
\cf2 [    0.048123] \cf5 hw-breakpoint\cf3 : found 6 breakpoint and 4 watchpoint registers.\
\cf2 [    0.048363] \cf3 ASID allocator initialised with 32768 entries\
\cf2 [    0.048540] \cf5 Serial\cf3 : AMBA PL011 UART driver\
\cf2 [    0.061948] \cf5 bcm2835-mbox fe00b880.mailbox\cf3 : mailbox enabled\
\cf2 [    0.084319] \cf5 raspberrypi-firmware soc:firmware\cf3 : Attached to firmware from 2023-03-17T10:50:39, variant start\
\cf2 [    0.088333] \cf5 raspberrypi-firmware soc:firmware\cf3 : Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54\
\cf2 [    0.104255] \cf3 KASLR enabled\
\cf2 [    0.138549] \cf5 bcm2835-dma fe007000.dma\cf3 : DMA legacy API manager, dmachans=0x1\
\cf2 [    0.144302] \cf3 SCSI subsystem initialized\
\cf2 [    0.144584] \cf5 usbcore\cf3 : registered new interface driver usbfs\
\cf2 [    0.144658] \cf5 usbcore\cf3 : registered new interface driver hub\
\cf2 [    0.144737] \cf5 usbcore\cf3 : registered new device driver usb\
\cf2 [    0.145129] \cf5 usb_phy_generic phy
\f0\b \cf3 : supply vcc not found, using dummy regulator
\f1\b0 \
\cf2 [    0.145357] \cf5 usb_phy_generic phy
\f0\b \cf3 : dummy supplies not allowed for exclusive requests
\f1\b0 \
\cf2 [    0.145724] \cf5 pps_core\cf3 : LinuxPPS API ver. 1 registered\
\cf2 [    0.145749] \cf5 pps_core\cf3 : Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>\
\cf2 [    0.145790] \cf3 PTP clock support registered\
\cf2 [    0.146955] \cf5 vgaarb\cf3 : loaded\
\cf2 [    0.147695] \cf5 clocksource\cf3 : Switched to clocksource arch_sys_counter\
\cf2 [    0.148463] \cf5 VFS\cf3 : Disk quotas dquot_6.6.0\
\cf2 [    0.148563] \cf5 VFS\cf3 : Dquot-cache hash table entries: 512 (order 0, 4096 bytes)\
\cf2 [    0.148757] \cf5 FS-Cache\cf3 : Loaded\
\cf2 [    0.148960] \cf5 CacheFiles\cf3 : Loaded\
\cf2 [    0.159845] \cf5 NET\cf3 : Registered PF_INET protocol family\
\cf2 [    0.160509] \cf5 IP idents hash table entries\cf3 : 65536 (order: 7, 524288 bytes, linear)\
\cf2 [    0.165235] \cf5 tcp_listen_portaddr_hash hash table entries\cf3 : 2048 (order: 3, 32768 bytes, linear)\
\cf2 [    0.165318] \cf5 Table-perturb hash table entries\cf3 : 65536 (order: 6, 262144 bytes, linear)\
\cf2 [    0.165464] \cf5 TCP established hash table entries\cf3 : 32768 (order: 6, 262144 bytes, linear)\
\cf2 [    0.165736] \cf5 TCP bind hash table entries\cf3 : 32768 (order: 8, 1048576 bytes, linear)\
\cf2 [    0.166783] \cf5 TCP\cf3 : Hash tables configured (established 32768 bind 32768)\
\cf2 [    0.167069] \cf5 UDP hash table entries\cf3 : 2048 (order: 4, 65536 bytes, linear)\
\cf2 [    0.167185] \cf5 UDP-Lite hash table entries\cf3 : 2048 (order: 4, 65536 bytes, linear)\
\cf2 [    0.167530] \cf5 NET\cf3 : Registered PF_UNIX/PF_LOCAL protocol family\
\cf2 [    0.168468] \cf5 RPC\cf3 : Registered named UNIX socket transport module.\
\cf2 [    0.168503] \cf5 RPC\cf3 : Registered udp transport module.\
\cf2 [    0.168523] \cf5 RPC\cf3 : Registered tcp transport module.\
\cf2 [    0.168542] \cf5 RPC\cf3 : Registered tcp NFSv4.1 backchannel transport module.\
\cf2 [    0.168576] \cf5 PCI\cf3 : CLS 0 bytes, default 64\
\cf2 [    0.171133] \cf5 hw perfevents\cf3 : enabled with armv8_cortex_a72 PMU driver, 7 counters available\
\cf2 [    0.171545] \cf5 kvm [1]\cf3 : IPA Size Limit: 44 bits\
\cf2 [    0.172939] \cf5 kvm [1]\cf3 : vgic interrupt IRQ9\
\cf2 [    0.173192] \cf5 kvm [1]\cf3 : Hyp mode initialized successfully\
\cf2 [    1.312830] \cf3 Initialise system trusted keyrings\
\cf2 [    1.313325] \cf5 workingset\cf3 : timestamp_bits=46 max_order=20 bucket_order=0\
\cf2 [    1.320968] \cf5 zbud\cf3 : loaded\
\cf2 [    1.323984] \cf5 NFS\cf3 : Registering the id_resolver key type\
\cf2 [    1.324044] \cf3 Key type id_resolver registered\
\cf2 [    1.324065] \cf3 Key type id_legacy registered\
\cf2 [    1.324187] \cf5 nfs4filelayout_init\cf3 : NFSv4 File Layout Driver Registering...\
\cf2 [    1.324215] \cf5 nfs4flexfilelayout_init\cf3 : NFSv4 Flexfile Layout Driver Registering...\
\cf2 [    1.325668] \cf3 Key type asymmetric registered\
\cf2 [    1.325701] \cf3 Asymmetric key parser 'x509' registered\
\cf2 [    1.325805] \cf3 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)\
\cf2 [    1.326097] \cf3 io scheduler mq-deadline registered\
\cf2 [    1.326125] \cf3 io scheduler kyber registered\
\cf2 [    1.328057] \cf5 irq_brcmstb_l2\cf3 : registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 27)\
\cf2 [    1.336634] \cf5 brcm-pcie fd500000.pcie\cf3 : host bridge /scb/pcie@7d500000 ranges:\
\cf2 [    1.336700] \cf5 brcm-pcie fd500000.pcie\cf3 :   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]\
\cf2 [    1.336805] \cf5 brcm-pcie fd500000.pcie\cf3 :      MEM 0x0600000000..0x063fffffff -> 0x00c0000000\
\cf2 [    1.336905] \cf5 brcm-pcie fd500000.pcie\cf3 :   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000\
\cf2 [    1.337941] \cf5 brcm-pcie fd500000.pcie\cf3 : PCI host bridge to bus 0000:00\
\cf2 [    1.337975] \cf5 pci_bus 0000:00\cf3 : root bus resource [bus 00-ff]\
\cf2 [    1.338003] \cf5 pci_bus 0000:00\cf3 : root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])\
\cf2 [    1.338093] \cf5 pci 0000:00:00.0\cf3 : [14e4:2711] type 01 class 0x060400\
\cf2 [    1.338363] \cf5 pci 0000:00:00.0\cf3 : PME# supported from D0 D3hot\
\cf2 [    1.342228] \cf5 pci 0000:00:00.0\cf3 : bridge configuration invalid ([bus 00-00]), reconfiguring\
\cf2 [    1.342505] \cf5 pci_bus 0000:01
\f0\b \cf3 : supply vpcie3v3 not found, using dummy regulator
\f1\b0 \
\cf2 [    1.342709] \cf5 pci_bus 0000:01
\f0\b \cf3 : supply vpcie3v3aux not found, using dummy regulator
\f1\b0 \
\cf2 [    1.342848] \cf5 pci_bus 0000:01
\f0\b \cf3 : supply vpcie12v not found, using dummy regulator
\f1\b0 \
\cf2 [    1.405789] \cf5 brcm-pcie fd500000.pcie\cf3 : link up, 5.0 GT/s PCIe x1 (SSC)\
\cf2 [    1.405896] \cf5 pci 0000:01:00.0\cf3 : [1106:3483] type 00 class 0x0c0330\
\cf2 [    1.405979] \cf5 pci 0000:01:00.0\cf3 : reg 0x10: [mem 0x00000000-0x00000fff 64bit]\
\cf2 [    1.406265] \cf5 pci 0000:01:00.0\cf3 : PME# supported from D0 D3hot\
\cf2 [    1.406801] \cf5 pci_bus 0000:01\cf3 : busn_res: [bus 01-ff] end is updated to 01\
\cf2 [    1.406858] \cf5 pci 0000:00:00.0\cf3 : BAR 8: assigned [mem 0x600000000-0x6000fffff]\
\cf2 [    1.406894] \cf5 pci 0000:01:00.0\cf3 : BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]\
\cf2 [    1.406951] \cf5 pci 0000:00:00.0\cf3 : PCI bridge to [bus 01]\
\cf2 [    1.406982] \cf5 pci 0000:00:00.0\cf3 :   bridge window [mem 0x600000000-0x6000fffff]\
\cf2 [    1.420275] \cf5 iproc-rng200 fe104000.rng\cf3 : hwrng registered\
\cf2 [    1.420875] \cf5 vc-mem\cf3 : phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)\
\cf2 [    1.422459] \cf5 gpiomem-bcm2835 fe200000.gpiomem\cf3 : Initialised: Registers at 0xfe200000\
\cf2 [    1.435654] \cf5 brd\cf3 : module loaded\
\cf2 [    1.444623] \cf5 loop\cf3 : module loaded\
\cf2 [    1.445477] \cf3 Loading iSCSI transport class v2.0-870.\
\cf2 [    1.450864] \cf5 bcmgenet fd580000.ethernet\cf3 : GENET 5.0 EPHY: 0x0000\
\cf2 [    1.511856] \cf5 unimac-mdio unimac-mdio.-19\cf3 : Broadcom UniMAC MDIO bus\
\cf2 [    1.513043] \cf5 usbcore\cf3 : registered new interface driver r8152\
\cf2 [    1.513143] \cf5 usbcore\cf3 : registered new interface driver lan78xx\
\cf2 [    1.513214] \cf5 usbcore\cf3 : registered new interface driver smsc95xx\
\cf2 [    1.560729] \cf5 pci 0000:00:00.0\cf3 : enabling device (0000 -> 0002)\
\cf2 [    1.560932] \cf5 xhci_hcd 0000:01:00.0\cf3 : xHCI Host Controller\
\cf2 [    1.560977] \cf5 xhci_hcd 0000:01:00.0\cf3 : new USB bus registered, assigned bus number 1\
\cf2 [    1.561732] \cf5 xhci_hcd 0000:01:00.0\cf3 : hcc params 0x002841eb hci version 0x100 quirks 0x0000e40000000890\
\cf2 [    1.562815] \cf5 xhci_hcd 0000:01:00.0\cf3 : xHCI Host Controller\
\cf2 [    1.562850] \cf5 xhci_hcd 0000:01:00.0\cf3 : new USB bus registered, assigned bus number 2\
\cf2 [    1.562885] \cf5 xhci_hcd 0000:01:00.0\cf3 : Host supports USB 3.0 SuperSpeed\
\cf2 [    1.563300] \cf5 usb usb1\cf3 : New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01\
\cf2 [    1.563336] \cf5 usb usb1\cf3 : New USB device strings: Mfr=3, Product=2, SerialNumber=1\
\cf2 [    1.563363] \cf5 usb usb1\cf3 : Product: xHCI Host Controller\
\cf2 [    1.563385] \cf5 usb usb1\cf3 : Manufacturer: Linux 6.1.21-v8+ xhci-hcd\
\cf2 [    1.563407] \cf5 usb usb1\cf3 : SerialNumber: 0000:01:00.0\
\cf2 [    1.564204] \cf5 hub 1-0:1.0\cf3 : USB hub found\
\cf2 [    1.564285] \cf5 hub 1-0:1.0\cf3 : 1 port detected\
\cf2 [    1.565261] \cf5 usb usb2\cf3 : New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01\
\cf2 [    1.565297] \cf5 usb usb2\cf3 : New USB device strings: Mfr=3, Product=2, SerialNumber=1\
\cf2 [    1.565324] \cf5 usb usb2\cf3 : Product: xHCI Host Controller\
\cf2 [    1.565346] \cf5 usb usb2\cf3 : Manufacturer: Linux 6.1.21-v8+ xhci-hcd\
\cf2 [    1.565368] \cf5 usb usb2\cf3 : SerialNumber: 0000:01:00.0\
\cf2 [    1.566050] \cf5 hub 2-0:1.0\cf3 : USB hub found\
\cf2 [    1.566157] \cf5 hub 2-0:1.0\cf3 : 4 ports detected\
\cf2 [    1.567973] \cf5 dwc_otg\cf3 : version 3.00a 10-AUG-2012 (platform bus)\
\cf2 [    1.568318] \cf5 dwc_otg\cf3 : FIQ enabled\
\cf2 [    1.568329] \cf5 dwc_otg\cf3 : NAK holdoff enabled\
\cf2 [    1.568339] \cf5 dwc_otg\cf3 : FIQ split-transaction FSM enabled\
\cf2 [    1.568358] \cf3 Module dwc_common_port init\
\cf2 [    1.568933] \cf5 usbcore\cf3 : registered new interface driver uas\
\cf2 [    1.569067] \cf5 usbcore\cf3 : registered new interface driver usb-storage\
\cf2 [    1.569319] \cf5 mousedev\cf3 : PS/2 mouse device common for all mice\
\cf2 [    1.575975] \cf5 sdhci\cf3 : Secure Digital Host Controller Interface driver\
\cf2 [    1.576016] \cf5 sdhci\cf3 : Copyright(c) Pierre Ossman\
\cf2 [    1.576696] \cf5 sdhci-pltfm\cf3 : SDHCI platform and OF driver helper\
\cf2 [    1.580363] \cf5 ledtrig-cpu\cf3 : registered to indicate activity on CPUs\
\cf2 [    1.580765] \cf5 hid\cf3 : raw HID events driver (C) Jiri Kosina\
\cf2 [    1.580994] \cf5 usbcore\cf3 : registered new interface driver usbhid\
\cf2 [    1.581019] \cf5 usbhid\cf3 : USB HID core driver\
\cf2 [    1.590097] \cf5 NET\cf3 : Registered PF_PACKET protocol family\
\cf2 [    1.590270] \cf3 Key type dns_resolver registered\
\cf2 [    1.591647] \cf3 registered taskstats version 1\
\cf2 [    1.591796] \cf3 Loading compiled-in X.509 certificates\
\cf2 [    1.592728] \cf3 Key type .fscrypt registered\
\cf2 [    1.592756] \cf3 Key type fscrypt-provisioning registered\
\cf2 [    1.608517] \cf5 uart-pl011 fe201000.serial\cf3 : there is not valid maps for state default\
\cf2 [    1.609277] \cf5 uart-pl011 fe201000.serial\cf3 : cts_event_workaround enabled\
\cf2 [    1.609472] \cf5 fe201000.serial\cf3 : ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2\
\cf2 [    1.618709] \cf5 bcm2835-wdt bcm2835-wdt\cf3 : Broadcom BCM2835 watchdog timer\
\cf2 [    1.619185] \cf5 bcm2835-power bcm2835-power\cf3 : Broadcom BCM2835 power domains driver\
\cf2 [    1.620624] \cf5 mmc-bcm2835 fe300000.mmcnr\cf3 : mmc_debug:0 mmc_debug2:0\
\cf2 [    1.620660] \cf5 mmc-bcm2835 fe300000.mmcnr\cf3 : DMA channel allocated\
\cf2 [    1.654798] \cf5 mmc1\cf6 : Controller never released inhibit bit(s).\cf3 \
\cf2 [    1.659504] \cf3 of_cfs_init\
\cf2 [    1.659650] \cf5 of_cfs_init\cf3 : OK\
\cf2 [    1.693872] \cf5 mmc0\cf3 : SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA\
\cf2 [    1.694399] \cf3 Waiting for root device PARTUUID=2b336bd4-02...\
\cf2 [    1.744463] \cf5 mmc1\cf3 : new high speed SDIO card at address 0001\
\cf2 [    1.819729] \cf5 usb 1-1\cf3 : new high-speed USB device number 2 using xhci_hcd\
\cf2 [    1.970340] \cf5 usb 1-1\cf3 : New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21\
\cf2 [    1.970379] \cf5 usb 1-1\cf3 : New USB device strings: Mfr=0, Product=1, SerialNumber=0\
\cf2 [    1.970406] \cf5 usb 1-1\cf3 : Product: USB2.0 Hub\
\cf2 [    1.972286] \cf5 hub 1-1:1.0\cf3 : USB hub found\
\cf2 [    1.972588] \cf5 hub 1-1:1.0\cf3 : 4 ports detected\
\cf2 [    2.267728] \cf5 usb 1-1.3\cf3 : new high-speed USB device number 3 using xhci_hcd\
\cf2 [    2.368281] \cf5 usb 1-1.3\cf3 : New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11\
\cf2 [    2.368318] \cf5 usb 1-1.3\cf3 : New USB device strings: Mfr=0, Product=1, SerialNumber=0\
\cf2 [    2.368347] \cf5 usb 1-1.3\cf3 : Product: USB 2.0 Hub\
\cf2 [    2.369883] \cf5 hub 1-1.3:1.0\cf3 : USB hub found\
\cf2 [    2.370014] \cf5 hub 1-1.3:1.0\cf3 : 4 ports detected\
\cf2 [    2.451715] \cf5 usb 1-1.4\cf3 : new high-speed USB device number 4 using xhci_hcd\
\cf2 [    2.598386] \cf5 usb 1-1.4\cf3 : New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00\
\cf2 [    2.598423] \cf5 usb 1-1.4\cf3 : New USB device strings: Mfr=2, Product=3, SerialNumber=1\
\cf2 [    2.598451] \cf5 usb 1-1.4\cf3 : Product: ASM1153E\
\cf2 [    2.598473] \cf5 usb 1-1.4\cf3 : Manufacturer: Inateck\
\cf2 [    2.598494] \cf5 usb 1-1.4\cf3 : SerialNumber: 123456789716\
\cf2 [    2.604818] \cf5 scsi host0\cf3 : uas\
\cf2 [    2.606628] \cf5 scsi 0:0:0:0\cf3 : Direct-Access     Inateck  ASM1153E         0    PQ: 0 ANSI: 6\
\cf2 [    2.611256] \cf5 sd 0:0:0:0\cf3 : [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)\
\cf2 [    2.611781] \cf5 sd 0:0:0:0\cf3 : [sda] Write Protect is off\
\cf2 [    2.611813] \cf5 sd 0:0:0:0\cf3 : [sda] Mode Sense: 43 00 00 00\
\cf2 [    2.612492] \cf5 sd 0:0:0:0\cf3 : [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA\
\cf2 [    2.612749] \cf5 sd 0:0:0:0\cf3 : [sda] Preferred minimum I/O size 512 bytes\
\cf2 [    2.612779] \cf5 sd 0:0:0:0\cf3 : [sda] Optimal transfer size 33553920 bytes\
\cf2 [    2.617545] \cf5  sda\cf3 : sda1 sda2\
\cf2 [    2.618121] \cf5 sd 0:0:0:0\cf3 : [sda] Attached SCSI disk\
\cf2 [    2.629926] \cf5 EXT4-fs (sda2)\cf3 : mounted filesystem with ordered data mode. Quota mode: none.\
\cf2 [    2.630041] \cf5 VFS\cf3 : Mounted root (ext4 filesystem) readonly on device 8:2.\
\cf2 [    2.633624] \cf5 devtmpfs\cf3 : mounted\
\cf2 [    2.642812] \cf5 Freeing unused kernel memory\cf3 : 4160K\
\cf2 [    2.643053] \cf3 Run /sbin/init as init process\
\cf2 [    2.643075] \cf3   with arguments:\
\cf2 [    2.643084] \cf3     /sbin/init\
\cf2 [    2.643094] \cf3   with environment:\
\cf2 [    2.643103] \cf3     HOME=/\
\cf2 [    2.643112] \cf3     TERM=linux\
\cf2 [    2.795742] \cf5 usb 1-1.3.1\cf3 : new full-speed USB device number 5 using xhci_hcd\
\cf2 [    3.023805] \cf5 usb 1-1.3.1\cf3 : New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00\
\cf2 [    3.023865] \cf5 usb 1-1.3.1\cf3 : New USB device strings: Mfr=1, Product=2, SerialNumber=3\
\cf2 [    3.023895] \cf5 usb 1-1.3.1\cf3 : Product: ConBee II\
\cf2 [    3.023918] \cf5 usb 1-1.3.1\cf3 : Manufacturer: dresden elektronik ingenieurtechnik GmbH\
\cf2 [    3.023944] \cf5 usb 1-1.3.1\cf3 : SerialNumber: DE2685684\
\cf2 [    3.227819] \cf5 usb 1-1.3.2\cf3 : new full-speed USB device number 6 using xhci_hcd\
\cf2 [    3.239445] \cf5 systemd[1]\cf3 : System time before build time, advancing clock.\
\cf2 [    3.464228] \cf5 usb 1-1.3.2\cf3 : New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00\
\cf2 [    3.464293] \cf5 usb 1-1.3.2\cf3 : New USB device strings: Mfr=1, Product=2, SerialNumber=3\
\cf2 [    3.464324] \cf5 usb 1-1.3.2\cf3 : Product: RFXtrx433XL\
\cf2 [    3.464348] \cf5 usb 1-1.3.2\cf3 : Manufacturer: RFXCOM\
\cf2 [    3.464370] \cf5 usb 1-1.3.2\cf3 : SerialNumber: DO3M9W1S\
\cf2 [    3.475637] \cf5 NET\cf3 : Registered PF_INET6 protocol family\
\cf2 [    3.477563] \cf3 Segment Routing with IPv6\
\cf2 [    3.477632] \cf3 In-situ OAM (IOAM) with IPv6\
\cf2 [    3.542101] \cf5 systemd[1]\cf3 : systemd 247.3-7+rpi1+deb11u7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)\
\cf2 [    3.543203] \cf5 systemd[1]\cf3 : Detected architecture arm64.\
\cf2 [    3.551355] \cf5 systemd[1]\cf3 : Set hostname to <rspi4>.\
\cf2 [    3.651797] \cf5 usb 1-1.3.3\cf3 : new full-speed USB device number 7 using xhci_hcd\
\cf2 [    3.878056] \cf5 usb 1-1.3.3\cf3 : New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00\
\cf2 [    3.878122] \cf5 usb 1-1.3.3\cf3 : New USB device strings: Mfr=1, Product=2, SerialNumber=3\
\cf2 [    3.878153] \cf5 usb 1-1.3.3\cf3 : Product: Zooz_ZST10_700_Z-Wave_Stick\
\cf2 [    3.878178] \cf5 usb 1-1.3.3\cf3 : Manufacturer: Silicon Labs\
\cf2 [    3.878200] \cf5 usb 1-1.3.3\cf3 : SerialNumber: 2631028bcc60ec118484447625bfaa52\
\cf2 [    4.625741] \cf5 systemd[1]\cf3 : Queued start job for default target Multi-User System.\
\cf2 [    4.699254] \cf5 systemd[1]\cf3 : Created slice system-getty.slice.\
\cf2 [    4.702167] \cf5 systemd[1]\cf3 : Created slice system-modprobe.slice.\
\cf2 [    4.704595] \cf5 systemd[1]\cf3 : Created slice system-systemd\\x2dfsck.slice.\
\cf2 [    4.706678] \cf5 systemd[1]\cf3 : Created slice User and Session Slice.\
\cf2 [    4.707617] \cf5 systemd[1]\cf3 : Started Dispatch Password Requests to Console Directory Watch.\
\cf2 [    4.708537] \cf5 systemd[1]\cf3 : Started Forward Password Requests to Wall Directory Watch.\
\cf2 [    4.710235] \cf5 systemd[1]\cf3 : Set up automount Arbitrary Executable File Formats File System Automount Point.\
\cf2 [    4.710920] \cf5 systemd[1]\cf3 : Reached target Local Encrypted Volumes.\
\cf2 [    4.711665] \cf5 systemd[1]\cf3 : Reached target Paths.\
\cf2 [    4.712341] \cf5 systemd[1]\cf3 : Reached target Slices.\
\cf2 [    4.712859] \cf5 systemd[1]\cf3 : Reached target Swap.\
\cf2 [    4.714482] \cf5 systemd[1]\cf3 : Listening on Syslog Socket.\
\cf2 [    4.715756] \cf5 systemd[1]\cf3 : Listening on fsck to fsckd communication Socket.\
\cf2 [    4.716556] \cf5 systemd[1]\cf3 : Listening on initctl Compatibility Named Pipe.\
\cf2 [    4.720178] \cf5 systemd[1]\cf3 : Listening on Journal Audit Socket.\
\cf2 [    4.721548] \cf5 systemd[1]\cf3 : Listening on Journal Socket (/dev/log).\
\cf2 [    4.723191] \cf5 systemd[1]\cf3 : Listening on Journal Socket.\
\cf2 [    4.724876] \cf5 systemd[1]\cf3 : Listening on udev Control Socket.\
\cf2 [    4.726122] \cf5 systemd[1]\cf3 : Listening on udev Kernel Socket.\
\cf2 [    4.727561] \cf5 systemd[1]\cf3 : Condition check resulted in Huge Pages File System being skipped.\
\cf2 [    4.760272] \cf5 systemd[1]\cf3 : Mounting POSIX Message Queue File System...\
\cf2 [    4.766733] \cf5 systemd[1]\cf3 : Mounting RPC Pipe File System...\
\cf2 [    4.773936] \cf5 systemd[1]\cf3 : Mounting Kernel Debug File System...\
\cf2 [    4.780811] \cf5 systemd[1]\cf3 : Mounting Kernel Trace File System...\
\cf2 [    4.782214] \cf5 systemd[1]\cf3 : Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.\
\cf2 [    4.789768] \cf5 systemd[1]\cf3 : Starting Restore / save the current clock...\
\cf2 [    4.796665] \cf5 systemd[1]\cf3 : Starting Set the console keyboard layout...\
\cf2 [    4.804527] \cf5 systemd[1]\cf3 : Starting Create list of static device nodes for the current kernel...\
\cf2 [    4.812214] \cf5 systemd[1]\cf3 : Starting Load Kernel Module configfs...\
\cf2 [    4.818739] \cf5 systemd[1]\cf3 : Starting Load Kernel Module drm...\
\cf2 [    4.825508] \cf5 systemd[1]\cf3 : Starting Load Kernel Module fuse...\
\cf2 [    4.831324] \cf5 systemd[1]\cf3 : Condition check resulted in Set Up Additional Binary Formats being skipped.\
\cf2 [    4.837808] \cf5 systemd[1]\cf3 : Starting File System Check on Root Device...\
\cf2 [    4.850586] \cf5 systemd[1]\cf3 : Starting Journal Service...\
\cf2 [    4.867033] \cf5 systemd[1]\cf3 : Starting Load Kernel Modules...\
\cf2 [    4.874371] \cf5 systemd[1]\cf3 : Starting Coldplug All udev Devices...\
\cf2 [    4.890100] \cf5 systemd[1]\cf3 : Mounted POSIX Message Queue File System.\
\cf2 [    4.891427] \cf5 systemd[1]\cf3 : Mounted RPC Pipe File System.\
\cf2 [    4.895902] \cf5 systemd[1]\cf3 : Mounted Kernel Debug File System.\
\cf2 [    4.897115] \cf5 systemd[1]\cf3 : Mounted Kernel Trace File System.\
\cf2 [    4.900045] \cf5 systemd[1]\cf3 : Finished Restore / save the current clock.\
\cf2 [    4.903909] \cf5 systemd[1]\cf3 : Finished Create list of static device nodes for the current kernel.\
\cf2 [    4.906644] \cf5 systemd[1]\cf3 : modprobe@configfs.service: Succeeded.\
\cf2 [    4.908496] \cf5 systemd[1]\cf3 : Finished Load Kernel Module configfs.\
\cf2 [    4.921258] \cf5 systemd[1]\cf3 : Mounting Kernel Configuration File System...\
\cf2 [    4.933054] \cf5 systemd[1]\cf3 : Started File System Check Daemon to report status.\
\cf2 [    4.941646] \cf5 systemd[1]\cf3 : Mounted Kernel Configuration File System.\
\cf2 [    4.948100] \cf5 fuse\cf3 : init (API version 7.37)\
\cf2 [    4.948647] \cf5 systemd[1]\cf3 : Finished Load Kernel Modules.\
\cf2 [    4.956045] \cf5 systemd[1]\cf3 : Starting Apply Kernel Variables...\
\cf2 [    4.959099] \cf5 systemd[1]\cf3 : modprobe@fuse.service: Succeeded.\
\cf2 [    4.960973] \cf5 systemd[1]\cf3 : Finished Load Kernel Module fuse.\
\cf2 [    4.969684] \cf5 systemd[1]\cf3 : Mounting FUSE Control File System...\
\cf2 [    4.988911] \cf5 systemd[1]\cf3 : Mounted FUSE Control File System.\
\cf2 [    5.039639] \cf5 systemd[1]\cf3 : modprobe@drm.service: Succeeded.\
\cf2 [    5.041388] \cf5 systemd[1]\cf3 : Finished Load Kernel Module drm.\
\cf2 [    5.058152] \cf5 systemd[1]\cf3 : Finished Apply Kernel Variables.\
\cf2 [    5.195990] \cf5 systemd[1]\cf3 : Finished File System Check on Root Device.\
\cf2 [    5.203297] \cf5 systemd[1]\cf3 : Starting Remount Root and Kernel File Systems...\
\cf2 [    5.264032] \cf5 systemd[1]\cf3 : Started Journal Service.\
\cf2 [    5.382710] \cf5 EXT4-fs (sda2)\cf3 : re-mounted. Quota mode: none.\
\cf2 [    5.483519] \cf5 systemd-journald[146]\cf3 : Received client request to flush runtime journal.\
\cf2 [    6.419169] \cf5 usb 1-1.3.1\cf3 : USB disconnect, device number 5\
\cf2 [    6.763769] \cf5 usb 1-1.3.1\cf3 : new full-speed USB device number 8 using xhci_hcd\
\cf2 [    6.991606] \cf5 usb 1-1.3.1\cf3 : New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00\
\cf2 [    6.991642] \cf5 usb 1-1.3.1\cf3 : New USB device strings: Mfr=1, Product=2, SerialNumber=3\
\cf2 [    6.991659] \cf5 usb 1-1.3.1\cf3 : Product: ConBee II\
\cf2 [    6.991707] \cf5 usb 1-1.3.1\cf3 : Manufacturer: dresden elektronik ingenieurtechnik GmbH\
\cf2 [    6.991721] \cf5 usb 1-1.3.1\cf3 : SerialNumber: DE2685684\
\cf2 [    8.794862] \cf5 mc\cf3 : Linux media interface: v0.10\
\cf2 [    8.951324] \cf5 videodev\cf3 : Linux video capture interface: v2.00\
\cf2 [    8.954332] \cf5 vc_sm_cma
\f0\b \cf3 : module is from the staging directory, the quality is unknown, you have been warned.
\f1\b0 \
\cf2 [    8.963104] \cf5 bcm2835_vc_sm_cma_probe\cf3 : Videocore shared memory driver\
\cf2 [    8.963142] \cf5 [vc_sm_connected_init]\cf3 : start\
\cf2 [    9.037646] \cf5 brcmstb-i2c fef04500.i2c\cf3 :  @97500hz registered in polling mode\
\cf2 [    9.071574] \cf5 [vc_sm_connected_init]\cf3 : installed successfully\
\cf2 [    9.073247] \cf5 brcmstb-i2c fef09500.i2c\cf3 :  @97500hz registered in polling mode\
\cf2 [    9.114035] \cf5 snd_bcm2835
\f0\b \cf3 : module is from the staging directory, the quality is unknown, you have been warned.
\f1\b0 \
\cf2 [    9.129933] \cf5 bcm2835_mmal_vchiq
\f0\b \cf3 : module is from the staging directory, the quality is unknown, you have been warned.
\f1\b0 \
\cf2 [    9.155599] \cf5 bcm2835_v4l2
\f0\b \cf3 : module is from the staging directory, the quality is unknown, you have been warned.
\f1\b0 \
\cf2 [    9.157997] \cf5 bcm2835_audio bcm2835_audio\cf3 : card created with 8 channels\
\cf2 [    9.200762] \cf5 bcm2835_isp
\f0\b \cf3 : module is from the staging directory, the quality is unknown, you have been warned.
\f1\b0 \
\cf2 [    9.221186] \cf5 rpivid_hevc
\f0\b \cf3 : module is from the staging directory, the quality is unknown, you have been warned.
\f1\b0 \
\cf2 [    9.224455] \cf5 bcm2835_codec
\f0\b \cf3 : module is from the staging directory, the quality is unknown, you have been warned.
\f1\b0 \
\cf2 [    9.233479] \cf5 bcm2835-codec bcm2835-codec\cf3 : Device registered as /dev/video10\
\cf2 [    9.233563] \cf5 bcm2835-codec bcm2835-codec\cf3 : Loaded V4L2 decode\
\cf2 [    9.237771] \cf5 rpivid feb10000.codec\cf3 : Device registered as /dev/video19\
\cf2 [    9.260528] \cf5 bcm2835-codec bcm2835-codec\cf3 : Device registered as /dev/video11\
\cf2 [    9.260593] \cf5 bcm2835-codec bcm2835-codec\cf3 : Loaded V4L2 encode\
\cf2 [    9.277431] \cf5 bcm2835-codec bcm2835-codec\cf3 : Device registered as /dev/video12\
\cf2 [    9.277492] \cf5 bcm2835-codec bcm2835-codec\cf3 : Loaded V4L2 isp\
\cf2 [    9.312310] \cf5 bcm2835-codec bcm2835-codec\cf3 : Device registered as /dev/video18\
\cf2 [    9.312371] \cf5 bcm2835-codec bcm2835-codec\cf3 : Loaded V4L2 image_fx\
\cf2 [    9.326133] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node output[0] registered as /dev/video13\
\cf2 [    9.346527] \cf5 bcm2835-codec bcm2835-codec\cf3 : Device registered as /dev/video31\
\cf2 [    9.346602] \cf5 bcm2835-codec bcm2835-codec\cf3 : Loaded V4L2 encode_image\
\cf2 [    9.363898] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node capture[0] registered as /dev/video14\
\cf2 [    9.379338] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node capture[1] registered as /dev/video15\
\cf2 [    9.400954] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node stats[2] registered as /dev/video16\
\cf2 [    9.401007] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register output node 0 with media controller\
\cf2 [    9.401058] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register capture node 1 with media controller\
\cf2 [    9.401077] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register capture node 2 with media controller\
\cf2 [    9.401095] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register capture node 3 with media controller\
\cf2 [    9.405640] \cf3 [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0\
\cf2 [    9.581384] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node output[0] registered as /dev/video20\
\cf2 [    9.639465] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node capture[0] registered as /dev/video21\
\cf2 [    9.640787] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node capture[1] registered as /dev/video22\
\cf2 [    9.682626] \cf5 bcm2835-isp bcm2835-isp\cf3 : Device node stats[2] registered as /dev/video23\
\cf2 [    9.682678] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register output node 0 with media controller\
\cf2 [    9.682702] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register capture node 1 with media controller\
\cf2 [    9.682721] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register capture node 2 with media controller\
\cf2 [    9.682757] \cf5 bcm2835-isp bcm2835-isp\cf3 : Register capture node 3 with media controller\
\cf2 [    9.693927] \cf5 bcm2835-isp bcm2835-isp\cf3 : Loaded V4L2 bcm2835-isp\
\cf2 [    9.734366] \cf5 cfg80211\cf3 : Loading compiled-in X.509 certificates for regulatory database\
\cf2 [    9.788235] \cf5 cfg80211\cf3 : Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\
\cf2 [    9.797119] \cf5 cfg80211\cf3 : loaded regulatory.db is malformed or signature is missing/invalid\
\cf2 [   10.052078] \cf5 brcmfmac\cf3 : F1 signature read @0x18000000=0x15264345\
\cf2 [   10.063961] \cf5 brcmfmac\cf3 : brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6\
\cf2 [   10.114110] \cf5 usbcore\cf3 : registered new interface driver brcmfmac\
\cf2 [   10.171891] \cf5 usbcore\cf3 : registered new interface driver usbserial_generic\
\cf2 [   10.172042] \cf5 usbserial\cf3 : USB Serial support registered for generic\
\cf2 [   10.222297] \cf5 usbcore\cf3 : registered new interface driver cp210x\
\cf2 [   10.222471] \cf5 usbserial\cf3 : USB Serial support registered for cp210x\
\cf2 [   10.222695] \cf5 cp210x 1-1.3.3:1.0\cf3 : cp210x converter detected\
\cf2 [   10.226358] \cf5 sd 0:0:0:0\cf3 : Attached scsi generic sg0 type 0\
\cf2 [   10.245994] \cf5 cdc_acm 1-1.3.1:1.0\cf3 : ttyACM0: USB ACM device\
\cf2 [   10.246277] \cf5 usbcore\cf3 : registered new interface driver cdc_acm\
\cf2 [   10.246293] \cf5 cdc_acm\cf3 : USB Abstract Control Model driver for USB modems and ISDN adapters\
\cf2 [   10.261825] \cf5 usb 1-1.3.3\cf3 : cp210x converter now attached to ttyUSB0\
\cf2 [   10.266070] \cf5 usbcore\cf3 : registered new interface driver ftdi_sio\
\cf2 [   10.298148] \cf5 usbserial\cf3 : USB Serial support registered for FTDI USB Serial Device\
\cf2 [   10.308773] \cf5 ftdi_sio 1-1.3.2:1.0\cf3 : FTDI USB Serial Device converter detected\
\cf2 [   10.336358] \cf5 brcmfmac\cf3 : brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov  1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60\
\cf2 [   10.353528] \cf5 usb 1-1.3.2\cf3 : Detected FT-X\
\cf2 [   10.391162] \cf5 usb 1-1.3.2\cf3 : FTDI USB Serial Device converter now attached to ttyUSB1\
\cf2 [   10.527802] \cf5 vc4-drm gpu\cf3 : bound fe400000.hvs (ops vc4_hvs_ops [vc4])\
\cf2 [   10.634902] \cf3 Registered IR keymap rc-cec\
\cf2 [   10.794203] \cf5 rc rc0\cf3 : vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0\
\cf2 [   10.866326] \cf5 input\cf3 : vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0\
\cf2 [   10.972453] \cf5 vc4-drm gpu\cf3 : bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])\
\cf2 [   11.004571] \cf3 Registered IR keymap rc-cec\
\cf2 [   11.004799] \cf5 rc rc1\cf3 : vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1\
\cf2 [   11.005036] \cf5 input\cf3 : vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1\
\cf2 [   11.008800] \cf5 vc4-drm gpu\cf3 : bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])\
\cf2 [   11.009422] \cf5 vc4-drm gpu\cf3 : bound fe004000.txp (ops vc4_txp_ops [vc4])\
\cf2 [   11.009871] \cf5 vc4-drm gpu\cf3 : bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])\
\cf2 [   11.010311] \cf5 vc4-drm gpu\cf3 : bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])\
\cf2 [   11.010738] \cf5 vc4-drm gpu\cf3 : bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])\
\cf2 [   11.011035] \cf5 vc4-drm gpu\cf3 : bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])\
\cf2 [   11.011437] \cf5 vc4-drm gpu\cf3 : bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])\
\cf2 [   11.024385] \cf3 [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1\
\cf2 [   11.025189] \cf5 vc4-drm gpu\cf3 : [drm] Cannot find any crtc or sizes\
\cf2 [   17.069502] \cf5 8021q\cf3 : 802.1Q VLAN Support v1.8\
\cf2 [   17.114901] \cf5 uart-pl011 fe201000.serial\cf3 : no DMA platform data\
\cf2 [   17.471506] \cf5 brcmfmac\cf3 : brcmf_cfg80211_set_power_mgmt: power save enabled\
\cf2 [   18.680790] \cf3 Adding 1048572k swap on /var/swap.  Priority:-2 extents:15 across:2088960k FS\
\cf2 [   18.788532] \cf5 bcmgenet fd580000.ethernet\cf3 : configuring instance for external RGMII (RX delay)\
\cf2 [   18.789535] \cf5 bcmgenet fd580000.ethernet eth0\cf3 : Link is Down\
\cf2 [   22.879875] \cf5 bcmgenet fd580000.ethernet eth0\cf3 : Link is Up - 1Gbps/Full - flow control rx/tx\
\cf2 [   22.879915] \cf5 IPv6\cf3 : ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready\
\cf2 [   25.350446] \cf5 ICMPv6
\f0\b \cf3 : process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
\f1\b0 \
\cf2 [   26.633700] \cf5 Bluetooth\cf3 : Core ver 2.22\
\cf2 [   26.633792] \cf5 NET\cf3 : Registered PF_BLUETOOTH protocol family\
\cf2 [   26.633797] \cf5 Bluetooth\cf3 : HCI device and connection manager initialized\
\cf2 [   26.633814] \cf5 Bluetooth\cf3 : HCI socket layer initialized\
\cf2 [   26.633822] \cf5 Bluetooth\cf3 : L2CAP socket layer initialized\
\cf2 [   26.633835] \cf5 Bluetooth\cf3 : SCO socket layer initialized\
\cf2 [   26.642652] \cf5 Bluetooth\cf3 : HCI UART driver ver 2.3\
\cf2 [   26.642674] \cf5 Bluetooth\cf3 : HCI UART protocol H4 registered\
\cf2 [   26.642734] \cf5 Bluetooth\cf3 : HCI UART protocol Three-wire (H5) registered\
\cf2 [   26.642905] \cf5 Bluetooth\cf3 : HCI UART protocol Broadcom registered\
\cf2 [   26.854095] \cf5 Bluetooth\cf3 : BNEP (Ethernet Emulation) ver 1.3\
\cf2 [   26.854114] \cf5 Bluetooth\cf3 : BNEP filters: protocol multicast\
\cf2 [   26.854129] \cf5 Bluetooth\cf3 : BNEP socket layer initialized\
\cf2 [   26.859336] \cf5 Bluetooth\cf3 : MGMT ver 1.22\
\cf2 [   26.871297] \cf5 NET\cf3 : Registered PF_ALG protocol family\
\cf2 [   32.956595] \cf3 Initializing XFRM netlink socket\
\cf2 [   32.984566] \cf5 bridge\cf3 : filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.\

\f0\b \cf2 pi@rspi4
\f1\b0 \cf3 :
\f0\b \cf4 ~ $
\f1\b0 \cf3  dmesg | grep -i usb\
[    0.144584] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver 
\f0\b \cf6 usb
\f1\b0 \cf3 fs\
[    0.144658] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver hub\
[    0.144737] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new device driver 
\f0\b \cf6 usb
\f1\b0 \cf3 \
[    0.145129] 
\f0\b \cf6 usb
\f1\b0 \cf3 _phy_generic phy: supply vcc not found, using dummy regulator\
[    0.145357] 
\f0\b \cf6 usb
\f1\b0 \cf3 _phy_generic phy: dummy supplies not allowed for exclusive requests\
[    1.513043] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver r8152\
[    1.513143] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver lan78xx\
[    1.513214] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver smsc95xx\
[    1.560977] xhci_hcd 0000:01:00.0: new 
\f0\b \cf6 USB
\f1\b0 \cf3  bus registered, assigned bus number 1\
[    1.562850] xhci_hcd 0000:01:00.0: new 
\f0\b \cf6 USB
\f1\b0 \cf3  bus registered, assigned bus number 2\
[    1.562885] xhci_hcd 0000:01:00.0: Host supports 
\f0\b \cf6 USB
\f1\b0 \cf3  3.0 SuperSpeed\
[    1.563300] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01\
[    1.563336] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=3, Product=2, SerialNumber=1\
[    1.563363] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 1: Product: xHCI Host Controller\
[    1.563385] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 1: Manufacturer: Linux 6.1.21-v8+ xhci-hcd\
[    1.563407] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 1: SerialNumber: 0000:01:00.0\
[    1.564204] hub 1-0:1.0: 
\f0\b \cf6 USB
\f1\b0 \cf3  hub found\
[    1.565261] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 2: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01\
[    1.565297] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 2: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=3, Product=2, SerialNumber=1\
[    1.565324] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 2: Product: xHCI Host Controller\
[    1.565346] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 2: Manufacturer: Linux 6.1.21-v8+ xhci-hcd\
[    1.565368] 
\f0\b \cf6 usb
\f1\b0 \cf3  
\f0\b \cf6 usb
\f1\b0 \cf3 2: SerialNumber: 0000:01:00.0\
[    1.566050] hub 2-0:1.0: 
\f0\b \cf6 USB
\f1\b0 \cf3  hub found\
[    1.568933] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver uas\
[    1.569067] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver 
\f0\b \cf6 usb
\f1\b0 \cf3 -storage\
[    1.580994] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver 
\f0\b \cf6 usb
\f1\b0 \cf3 hid\
[    1.581019] 
\f0\b \cf6 usb
\f1\b0 \cf3 hid: 
\f0\b \cf6 USB
\f1\b0 \cf3  HID core driver\
[    1.819729] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1: new high-speed 
\f0\b \cf6 USB
\f1\b0 \cf3  device number 2 using xhci_hcd\
[    1.970340] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21\
[    1.970379] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=0, Product=1, SerialNumber=0\
[    1.970406] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1: Product: 
\f0\b \cf6 USB
\f1\b0 \cf3 2.0 Hub\
[    1.972286] hub 1-1:1.0: 
\f0\b \cf6 USB
\f1\b0 \cf3  hub found\
[    2.267728] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3: new high-speed 
\f0\b \cf6 USB
\f1\b0 \cf3  device number 3 using xhci_hcd\
[    2.368281] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11\
[    2.368318] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=0, Product=1, SerialNumber=0\
[    2.368347] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3: Product: 
\f0\b \cf6 USB
\f1\b0 \cf3  2.0 Hub\
[    2.369883] hub 1-1.3:1.0: 
\f0\b \cf6 USB
\f1\b0 \cf3  hub found\
[    2.451715] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.4: new high-speed 
\f0\b \cf6 USB
\f1\b0 \cf3  device number 4 using xhci_hcd\
[    2.598386] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.4: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00\
[    2.598423] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.4: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=2, Product=3, SerialNumber=1\
[    2.598451] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.4: Product: ASM1153E\
[    2.598473] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.4: Manufacturer: Inateck\
[    2.598494] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.4: SerialNumber: 123456789716\
[    2.795742] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: new full-speed 
\f0\b \cf6 USB
\f1\b0 \cf3  device number 5 using xhci_hcd\
[    3.023805] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00\
[    3.023865] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=1, Product=2, SerialNumber=3\
[    3.023895] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: Product: ConBee II\
[    3.023918] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: Manufacturer: dresden elektronik ingenieurtechnik GmbH\
[    3.023944] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: SerialNumber: DE2685684\
[    3.227819] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: new full-speed 
\f0\b \cf6 USB
\f1\b0 \cf3  device number 6 using xhci_hcd\
[    3.464228] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=0403, idProduct=6015, bcdDevice=10.00\
[    3.464293] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=1, Product=2, SerialNumber=3\
[    3.464324] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: Product: RFXtrx433XL\
[    3.464348] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: Manufacturer: RFXCOM\
[    3.464370] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: SerialNumber: DO3M9W1S\
[    3.651797] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.3: new full-speed 
\f0\b \cf6 USB
\f1\b0 \cf3  device number 7 using xhci_hcd\
[    3.878056] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.3: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00\
[    3.878122] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.3: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=1, Product=2, SerialNumber=3\
[    3.878153] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.3: Product: Zooz_ZST10_700_Z-Wave_Stick\
[    3.878178] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.3: Manufacturer: Silicon Labs\
[    3.878200] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.3: SerialNumber: 2631028bcc60ec118484447625bfaa52\
[    6.419169] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: 
\f0\b \cf6 USB
\f1\b0 \cf3  disconnect, device number 5\
[    6.763769] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: new full-speed 
\f0\b \cf6 USB
\f1\b0 \cf3  device number 8 using xhci_hcd\
[    6.991606] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00\
[    6.991642] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: New 
\f0\b \cf6 USB
\f1\b0 \cf3  device strings: Mfr=1, Product=2, SerialNumber=3\
[    6.991659] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: Product: ConBee II\
[    6.991707] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: Manufacturer: dresden elektronik ingenieurtechnik GmbH\
[    6.991721] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.1: SerialNumber: DE2685684\
[   10.114110] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver brcmfmac\
[   10.171891] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver 
\f0\b \cf6 usb
\f1\b0 \cf3 serial_generic\
[   10.172042] 
\f0\b \cf6 usb
\f1\b0 \cf3 serial: 
\f0\b \cf6 USB
\f1\b0 \cf3  Serial support registered for generic\
[   10.222297] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver cp210x\
[   10.222471] 
\f0\b \cf6 usb
\f1\b0 \cf3 serial: 
\f0\b \cf6 USB
\f1\b0 \cf3  Serial support registered for cp210x\
[   10.245994] cdc_acm 1-1.3.1:1.0: ttyACM0: 
\f0\b \cf6 USB
\f1\b0 \cf3  ACM device\
[   10.246277] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver cdc_acm\
[   10.246293] cdc_acm: 
\f0\b \cf6 USB
\f1\b0 \cf3  Abstract Control Model driver for 
\f0\b \cf6 USB
\f1\b0 \cf3  modems and ISDN adapters\
[   10.261825] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.3: cp210x converter now attached to tty
\f0\b \cf6 USB
\f1\b0 \cf3 0\
[   10.266070] 
\f0\b \cf6 usb
\f1\b0 \cf3 core: registered new interface driver ftdi_sio\
[   10.298148] 
\f0\b \cf6 usb
\f1\b0 \cf3 serial: 
\f0\b \cf6 USB
\f1\b0 \cf3  Serial support registered for FTDI 
\f0\b \cf6 USB
\f1\b0 \cf3  Serial Device\
[   10.308773] ftdi_sio 1-1.3.2:1.0: FTDI 
\f0\b \cf6 USB
\f1\b0 \cf3  Serial Device converter detected\
[   10.353528] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: Detected FT-X\
[   10.391162] 
\f0\b \cf6 usb
\f1\b0 \cf3  1-1.3.2: FTDI 
\f0\b \cf6 USB
\f1\b0 \cf3  Serial Device converter now attached to tty
\f0\b \cf6 USB
\f1\b0 \cf3 1\

\f0\b \cf2 pi@rspi4
\f1\b0 \cf3 :
\f0\b \cf4 ~ $
\f1\b0 \cf3  lsblk\
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT\
sda      8:0    0 59.6G  0 disk \
\uc0\u9500 \u9472 sda1   8:1    0  256M  0 part /boot\
\uc0\u9492 \u9472 sda2   8:2    0 59.4G  0 part /\

\f0\b \cf2 pi@rspi4
\f1\b0 \cf3 :
\f0\b \cf4 ~ $
\f1\b0 \cf3  dmesg | grep -i error}