***************************************************************************************************** * Installation des dépendance * ***************************************************************************************************** Reading package lists... Building dependency tree... Reading state information... autoconf is already the newest version (2.69-11). autoconf set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... automake is already the newest version (1:1.16.1-4). automake set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... autopoint is already the newest version (0.19.8.1-9). autopoint set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.6). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. The following packages will be REMOVED: pkg-config The following NEW packages will be installed: pkgconf 0 upgraded, 1 newly installed, 1 to remove and 36 not upgraded. Need to get 65.6 kB of archives. After this operation, 117 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main arm64 pkgconf arm64 1.6.0-1 [65.6 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 65.6 kB in 0s (527 kB/s) dpkg: pkg-config: dependency problems, but removing anyway as you requested: php7.3-dev depends on pkg-config. libglib2.0-dev:arm64 depends on pkg-config. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 69767 files and directories currently installed.) Removing pkg-config (0.29-6) ... Selecting previously unselected package pkgconf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 69751 files and directories currently installed.) Preparing to unpack .../pkgconf_1.6.0-1_arm64.deb ... Adding 'diversion of /usr/bin/pkg-config to /usr/bin/pkg-config.real by pkgconf' Adding 'diversion of /usr/share/aclocal/pkg.m4 to /usr/share/aclocal/pkg.real.m4 by pkgconf' Adding 'diversion of /usr/share/man/man1/pkg-config.1.gz to /usr/share/man/man1/pkg-config.real.1.gz by pkgconf' Adding 'diversion of /usr/share/pkg-config-crosswrapper to /usr/share/pkg-config-crosswrapper.real by pkgconf' Unpacking pkgconf (1.6.0-1) ... Setting up pkgconf (1.6.0-1) ... Processing triggers for man-db (2.8.5-2) ... Reading package lists... Building dependency tree... Reading state information... libtool is already the newest version (2.4.6-9). libtool set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. The following NEW packages will be installed: libzip-dev 0 upgraded, 1 newly installed, 0 to remove and 36 not upgraded. Need to get 158 kB of archives. After this operation, 301 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main arm64 libzip-dev arm64 1.5.1-4 [158 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 158 kB in 0s (2232 kB/s) Selecting previously unselected package libzip-dev:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 69784 files and directories currently installed.) Preparing to unpack .../libzip-dev_1.5.1-4_arm64.deb ... Unpacking libzip-dev:arm64 (1.5.1-4) ... Setting up libzip-dev:arm64 (1.5.1-4) ... Processing triggers for man-db (2.8.5-2) ... Reading package lists... Building dependency tree... Reading state information... libjpeg-dev is already the newest version (1:1.5.2-2+deb10u1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... Package libjpeg8-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: libjpeg62-turbo-dev:armhf libjpeg62-turbo-dev E: Package 'libjpeg8-dev' has no installation candidate Reading package lists... Building dependency tree... Reading state information... libjpeg62-turbo-dev is already the newest version (1:1.5.2-2+deb10u1). libjpeg62-turbo-dev set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... git is already the newest version (1:2.20.1-2+deb10u3). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. The following additional packages will be installed: libavcodec-dev libavutil-dev libswresample-dev The following NEW packages will be installed: libavcodec-dev libavformat-dev libavutil-dev libswresample-dev 0 upgraded, 4 newly installed, 0 to remove and 36 not upgraded. Need to get 6646 kB of archives. After this operation, 24.6 MB of additional disk space will be used. Get:1 http://archive.raspberrypi.org/debian buster/main arm64 libavutil-dev arm64 7:4.1.6-1~deb10u1+rpt1 [357 kB] Get:2 http://archive.raspberrypi.org/debian buster/main arm64 libswresample-dev arm64 7:4.1.6-1~deb10u1+rpt1 [108 kB] Get:3 http://archive.raspberrypi.org/debian buster/main arm64 libavcodec-dev arm64 7:4.1.6-1~deb10u1+rpt1 [4989 kB] Get:4 http://archive.raspberrypi.org/debian buster/main arm64 libavformat-dev arm64 7:4.1.6-1~deb10u1+rpt1 [1191 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 6646 kB in 0s (16.6 MB/s) Selecting previously unselected package libavutil-dev:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 69910 files and directories currently installed.) Preparing to unpack .../libavutil-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libavutil-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Selecting previously unselected package libswresample-dev:arm64. Preparing to unpack .../libswresample-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libswresample-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Selecting previously unselected package libavcodec-dev:arm64. Preparing to unpack .../libavcodec-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libavcodec-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Selecting previously unselected package libavformat-dev:arm64. Preparing to unpack .../libavformat-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libavformat-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libavutil-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libswresample-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libavcodec-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libavformat-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Reading package lists... Building dependency tree... Reading state information... libavcodec-dev is already the newest version (7:4.1.6-1~deb10u1+rpt1). libavcodec-dev set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... libavutil-dev is already the newest version (7:4.1.6-1~deb10u1+rpt1). libavutil-dev set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. The following NEW packages will be installed: libswscale-dev 0 upgraded, 1 newly installed, 0 to remove and 36 not upgraded. Need to get 197 kB of archives. After this operation, 792 kB of additional disk space will be used. Get:1 http://archive.raspberrypi.org/debian buster/main arm64 libswscale-dev arm64 7:4.1.6-1~deb10u1+rpt1 [197 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 197 kB in 0s (1431 kB/s) Selecting previously unselected package libswscale-dev:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 70047 files and directories currently installed.) Preparing to unpack .../libswscale-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libswscale-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libswscale-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. The following additional packages will be installed: libavfilter-dev libpostproc-dev The following NEW packages will be installed: libavdevice-dev libavfilter-dev libpostproc-dev 0 upgraded, 3 newly installed, 0 to remove and 36 not upgraded. Need to get 1350 kB of archives. After this operation, 5791 kB of additional disk space will be used. Get:1 http://archive.raspberrypi.org/debian buster/main arm64 libpostproc-dev arm64 7:4.1.6-1~deb10u1+rpt1 [85.3 kB] Get:2 http://archive.raspberrypi.org/debian buster/main arm64 libavfilter-dev arm64 7:4.1.6-1~deb10u1+rpt1 [1129 kB] Get:3 http://archive.raspberrypi.org/debian buster/main arm64 libavdevice-dev arm64 7:4.1.6-1~deb10u1+rpt1 [136 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 1350 kB in 0s (3400 kB/s) Selecting previously unselected package libpostproc-dev:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 70057 files and directories currently installed.) Preparing to unpack .../libpostproc-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libpostproc-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Selecting previously unselected package libavfilter-dev:arm64. Preparing to unpack .../libavfilter-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libavfilter-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Selecting previously unselected package libavdevice-dev:arm64. Preparing to unpack .../libavdevice-dev_7%3a4.1.6-1~deb10u1+rpt1_arm64.deb ... Unpacking libavdevice-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libpostproc-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libavfilter-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Setting up libavdevice-dev:arm64 (7:4.1.6-1~deb10u1+rpt1) ... Reading package lists... Building dependency tree... Reading state information... gettext is already the newest version (0.19.8.1-9). gettext set to manually installed. The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. The following NEW packages will be installed: libwebp-dev 0 upgraded, 1 newly installed, 0 to remove and 36 not upgraded. Need to get 313 kB of archives. After this operation, 819 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main arm64 libwebp-dev arm64 0.6.1-2 [313 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 313 kB in 0s (1281 kB/s) Selecting previously unselected package libwebp-dev:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 70089 files and directories currently installed.) Preparing to unpack .../libwebp-dev_0.6.1-2_arm64.deb ... Unpacking libwebp-dev:arm64 (0.6.1-2) ... Setting up libwebp-dev:arm64 (0.6.1-2) ... Reading package lists... Building dependency tree... Reading state information... The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. The following additional packages will be installed: libgcrypt20-dev libgmp-dev libgmpxx4ldbl libgnutls-openssl27 libgnutls28-dev libgnutlsxx28 libgpg-error-dev libidn2-dev libmicrohttpd12 libp11-kit-dev libtasn1-6-dev libtasn1-doc nettle-dev Suggested packages: libgcrypt20-doc gmp-doc libgmp10-doc libmpfr-dev gnutls-bin gnutls-doc The following NEW packages will be installed: libgcrypt20-dev libgmp-dev libgmpxx4ldbl libgnutls-openssl27 libgnutls28-dev libgnutlsxx28 libgpg-error-dev libidn2-dev libmicrohttpd-dev libmicrohttpd12 libp11-kit-dev libtasn1-6-dev libtasn1-doc nettle-dev 0 upgraded, 14 newly installed, 0 to remove and 36 not upgraded. Need to get 4887 kB of archives. After this operation, 14.9 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main arm64 libgpg-error-dev arm64 1.35-1 [124 kB] Get:2 http://deb.debian.org/debian buster/main arm64 libgcrypt20-dev arm64 1.8.4-5 [545 kB] Get:3 http://deb.debian.org/debian buster/main arm64 libgmpxx4ldbl arm64 2:6.1.2+dfsg-4 [22.6 kB] Get:4 http://deb.debian.org/debian buster/main arm64 libgmp-dev arm64 2:6.1.2+dfsg-4 [608 kB] Get:5 http://deb.debian.org/debian buster/main arm64 libgnutls-openssl27 arm64 3.6.7-4+deb10u6 [317 kB] Get:6 http://deb.debian.org/debian buster/main arm64 libgnutlsxx28 arm64 3.6.7-4+deb10u6 [12.9 kB] Get:7 http://deb.debian.org/debian buster/main arm64 libidn2-dev arm64 2.0.5-1+deb10u1 [79.0 kB] Get:8 http://deb.debian.org/debian buster/main arm64 libp11-kit-dev arm64 0.23.15-2+deb10u1 [196 kB] Get:9 http://deb.debian.org/debian buster/main arm64 libtasn1-6-dev arm64 4.13-3 [100 kB] Get:10 http://deb.debian.org/debian buster/main arm64 nettle-dev arm64 3.4.1-1 [1091 kB] Get:11 http://deb.debian.org/debian buster/main arm64 libgnutls28-dev arm64 3.6.7-4+deb10u6 [1123 kB] Get:12 http://deb.debian.org/debian buster/main arm64 libmicrohttpd12 arm64 0.9.62-1 [91.5 kB] Get:13 http://deb.debian.org/debian buster/main arm64 libmicrohttpd-dev arm64 0.9.62-1 [260 kB] Get:14 http://deb.debian.org/debian buster/main arm64 libtasn1-doc all 4.13-3 [317 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 4887 kB in 1s (8089 kB/s) Selecting previously unselected package libgpg-error-dev. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 70113 files and directories currently installed.) Preparing to unpack .../00-libgpg-error-dev_1.35-1_arm64.deb ... Unpacking libgpg-error-dev (1.35-1) ... Selecting previously unselected package libgcrypt20-dev. Preparing to unpack .../01-libgcrypt20-dev_1.8.4-5_arm64.deb ... Unpacking libgcrypt20-dev (1.8.4-5) ... Selecting previously unselected package libgmpxx4ldbl:arm64. Preparing to unpack .../02-libgmpxx4ldbl_2%3a6.1.2+dfsg-4_arm64.deb ... Unpacking libgmpxx4ldbl:arm64 (2:6.1.2+dfsg-4) ... Selecting previously unselected package libgmp-dev:arm64. Preparing to unpack .../03-libgmp-dev_2%3a6.1.2+dfsg-4_arm64.deb ... Unpacking libgmp-dev:arm64 (2:6.1.2+dfsg-4) ... Selecting previously unselected package libgnutls-openssl27:arm64. Preparing to unpack .../04-libgnutls-openssl27_3.6.7-4+deb10u6_arm64.deb ... Unpacking libgnutls-openssl27:arm64 (3.6.7-4+deb10u6) ... Selecting previously unselected package libgnutlsxx28:arm64. Preparing to unpack .../05-libgnutlsxx28_3.6.7-4+deb10u6_arm64.deb ... Unpacking libgnutlsxx28:arm64 (3.6.7-4+deb10u6) ... Selecting previously unselected package libidn2-dev:arm64. Preparing to unpack .../06-libidn2-dev_2.0.5-1+deb10u1_arm64.deb ... Unpacking libidn2-dev:arm64 (2.0.5-1+deb10u1) ... Selecting previously unselected package libp11-kit-dev:arm64. Preparing to unpack .../07-libp11-kit-dev_0.23.15-2+deb10u1_arm64.deb ... Unpacking libp11-kit-dev:arm64 (0.23.15-2+deb10u1) ... Selecting previously unselected package libtasn1-6-dev:arm64. Preparing to unpack .../08-libtasn1-6-dev_4.13-3_arm64.deb ... Unpacking libtasn1-6-dev:arm64 (4.13-3) ... Selecting previously unselected package nettle-dev:arm64. Preparing to unpack .../09-nettle-dev_3.4.1-1_arm64.deb ... Unpacking nettle-dev:arm64 (3.4.1-1) ... Selecting previously unselected package libgnutls28-dev:arm64. Preparing to unpack .../10-libgnutls28-dev_3.6.7-4+deb10u6_arm64.deb ... Unpacking libgnutls28-dev:arm64 (3.6.7-4+deb10u6) ... Selecting previously unselected package libmicrohttpd12. Preparing to unpack .../11-libmicrohttpd12_0.9.62-1_arm64.deb ... Unpacking libmicrohttpd12 (0.9.62-1) ... Selecting previously unselected package libmicrohttpd-dev. Preparing to unpack .../12-libmicrohttpd-dev_0.9.62-1_arm64.deb ... Unpacking libmicrohttpd-dev (0.9.62-1) ... Selecting previously unselected package libtasn1-doc. Preparing to unpack .../13-libtasn1-doc_4.13-3_all.deb ... Unpacking libtasn1-doc (4.13-3) ... Setting up libgnutls-openssl27:arm64 (3.6.7-4+deb10u6) ... Setting up libtasn1-doc (4.13-3) ... Setting up libmicrohttpd12 (0.9.62-1) ... Setting up libgmpxx4ldbl:arm64 (2:6.1.2+dfsg-4) ... Setting up libgpg-error-dev (1.35-1) ... Setting up libgnutlsxx28:arm64 (3.6.7-4+deb10u6) ... Setting up libidn2-dev:arm64 (2.0.5-1+deb10u1) ... Setting up libtasn1-6-dev:arm64 (4.13-3) ... Setting up libp11-kit-dev:arm64 (0.23.15-2+deb10u1) ... Setting up libgmp-dev:arm64 (2:6.1.2+dfsg-4) ... Setting up nettle-dev:arm64 (3.4.1-1) ... Setting up libgcrypt20-dev (1.8.4-5) ... Setting up libgnutls28-dev:arm64 (3.6.7-4+deb10u6) ... Setting up libmicrohttpd-dev (0.9.62-1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10) ... Reading package lists... Building dependency tree... Reading state information... libwebp-dev is already the newest version (0.6.1-2). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... gettext is already the newest version (0.19.8.1-9). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... libmicrohttpd-dev is already the newest version (0.9.62-1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. ***************************************************************************************************** * Installation de FFMPEG * ***************************************************************************************************** Reading package lists... Building dependency tree... Reading state information... libavformat-dev is already the newest version (7:4.1.6-1~deb10u1+rpt1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... libavcodec-dev is already the newest version (7:4.1.6-1~deb10u1+rpt1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... libavutil-dev is already the newest version (7:4.1.6-1~deb10u1+rpt1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... libswscale-dev is already the newest version (7:4.1.6-1~deb10u1+rpt1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... libavdevice-dev is already the newest version (7:4.1.6-1~deb10u1+rpt1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. Reading package lists... Building dependency tree... Reading state information... ffmpeg is already the newest version (7:4.1.6-1~deb10u1+rpt1). The following package was automatically installed and is no longer required: raspi-gpio Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded. ***************************************************************************************************** * Compilation de motion: * ***************************************************************************************************** Cloning into 'motion'... Switched to a new branch '4.3' Branch '4.3' set up to track remote branch '4.3' from 'origin'. autoreconf: Entering directory `.' autoreconf: running: autopoint --force Copying file ABOUT-NLS Copying file config.rpath Creating directory m4 Copying file m4/codeset.m4 Copying file m4/extern-inline.m4 Copying file m4/fcntl-o.m4 Copying file m4/gettext.m4 Copying file m4/glibc2.m4 Copying file m4/glibc21.m4 Copying file m4/iconv.m4 Copying file m4/intdiv0.m4 Copying file m4/intl.m4 Copying file m4/intldir.m4 Copying file m4/intlmacosx.m4 Copying file m4/intmax.m4 Copying file m4/inttypes-pri.m4 Copying file m4/inttypes_h.m4 Copying file m4/lcmessage.m4 Copying file m4/lib-ld.m4 Copying file m4/lib-link.m4 Copying file m4/lib-prefix.m4 Copying file m4/lock.m4 Copying file m4/longlong.m4 Copying file m4/nls.m4 Copying file m4/po.m4 Copying file m4/printf-posix.m4 Copying file m4/progtest.m4 Copying file m4/size_max.m4 Copying file m4/stdint_h.m4 Copying file m4/threadlib.m4 Copying file m4/uintmax_t.m4 Copying file m4/visibility.m4 Copying file m4/wchar_t.m4 Copying file m4/wint_t.m4 Copying file m4/xsize.m4 Copying file po/Makefile.in.in Copying file po/Makevars.template Copying file po/Rules-quot Copying file po/boldquot.sed Copying file po/en@boldquot.header Copying file po/en@quot.header Copying file po/insert-header.sin Copying file po/quot.sed Copying file po/remove-potcdate.sin autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: configure.ac: not using Libtool autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:4: installing './compile' configure.ac:9: installing './config.guess' configure.ac:9: installing './config.sub' configure.ac:2: installing './install-sh' configure.ac:2: installing './missing' src/Makefile.am: installing './depcomp' autoreconf: Leaving directory `.' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether to enable maintainer-specific portions of Makefiles... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking build system type... aarch64-unknown-linux-gnu checking host system type... aarch64-unknown-linux-gnu checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking for stdlib.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/wait.h usability... yes checking sys/wait.h presence... yes checking for sys/wait.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/mman.h usability... yes checking sys/mman.h presence... yes checking for sys/mman.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking assert.h usability... yes checking assert.h presence... yes checking for assert.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking regex.h usability... yes checking regex.h presence... yes checking for regex.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking for ctype.h... (cached) yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for pkg-config... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking setjmp.h usability... yes checking setjmp.h presence... yes checking for setjmp.h... yes checking jerror.h usability... yes checking jerror.h presence... yes checking for jerror.h... yes checking jpeglib.h usability... yes checking jpeglib.h presence... yes checking for jpeglib.h... yes checking jpg libraries... yes checking microhttpd.h usability... yes checking microhttpd.h presence... yes checking for microhttpd.h... yes checking libmicrohttpd libraries... yes checking pthread_np.h usability... no checking pthread_np.h presence... no checking for pthread_np.h... no checking for pthread_setname_np... yes checking for pthread_getname_np... yes checking for XSI strerror_r... no checking dev/bktr/ioctl_meteor.h usability... no checking dev/bktr/ioctl_meteor.h presence... no checking for dev/bktr/ioctl_meteor.h... no checking dev/bktr/ioctl_bt848.h usability... no checking dev/bktr/ioctl_bt848.h presence... no checking for dev/bktr/ioctl_bt848.h... no checking dev/ic/bt8xx.h usability... no checking dev/ic/bt8xx.h presence... no checking for dev/ic/bt8xx.h... no checking linux/videodev2.h usability... yes checking linux/videodev2.h presence... yes checking for linux/videodev2.h... yes checking for webp... yes checking MMAL pkg-config path... .:/opt/vc/lib/pkgconfig checking for MMAL... yes checking FFmpeg pkg-config path... checking for FFmpeg... yes checking MariaDB pkg-config path... checking for MariaDB... no checking MySQL pkg-config path... checking for MySQL... no checking PostgreSQL pkg-config path... checking for PostgreSQL... no checking sqlite3.h usability... no checking sqlite3.h presence... no checking for sqlite3.h... no checking for kill... /usr/bin/kill checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating man/Makefile config.status: creating data/camera1-dist.conf config.status: creating data/camera2-dist.conf config.status: creating data/camera3-dist.conf config.status: creating data/camera4-dist.conf config.status: creating data/motion-dist.conf config.status: creating data/motion.service config.status: creating config.h config.status: executing depfiles commands config.status: executing po-directories commands config.status: creating po/POTFILES config.status: creating po/Makefile ************************** Configure status motion 4.3.2 ************************** CFLAGS: -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 LIBS: -pthread -L/usr/lib/aarch64-linux-gnu -ljpeg -L/usr/lib/aarch64-linux-gnu -lmicrohttpd -L/usr/lib/aarch64-linux-gnu -lwebpmux -lwebp -L/usr/lib/aarch64-linux-gnu -lmmal -lmmal_core -lmmal_util -lmmal_vc_client -lbcm_host -lvcsm -lvcos -lvchostif -L/usr/lib/aarch64-linux-gnu -lavutil -lavformat -lavcodec -lswscale -lavdevice LDFLAGS: OS : linux-gnu pthread_np : no pthread_setname_np : yes pthread_getname_np : yes XSI error : no webp support : yes V4L2 support : yes BKTR support : no MMAL support : yes FFmpeg support : yes libavformat version : 58.20.100 SQLite3 support : no MYSQL support : no PostgreSQL support : no MariaDB support : no Install prefix: /usr/local make all-recursive make[1]: Entering directory '/usr/local/src/motion' Making all in src make[2]: Entering directory '/usr/local/src/motion/src' depbase=`echo motion.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT motion.o -MD -MP -MF $depbase.Tpo -c -o motion.o motion.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo logger.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT logger.o -MD -MP -MF $depbase.Tpo -c -o logger.o logger.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo conf.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT conf.o -MD -MP -MF $depbase.Tpo -c -o conf.o conf.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo draw.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT draw.o -MD -MP -MF $depbase.Tpo -c -o draw.o draw.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo jpegutils.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT jpegutils.o -MD -MP -MF $depbase.Tpo -c -o jpegutils.o jpegutils.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo video_loopback.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT video_loopback.o -MD -MP -MF $depbase.Tpo -c -o video_loopback.o video_loopback.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo video_v4l2.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT video_v4l2.o -MD -MP -MF $depbase.Tpo -c -o video_v4l2.o video_v4l2.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo video_common.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT video_common.o -MD -MP -MF $depbase.Tpo -c -o video_common.o video_common.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo video_bktr.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT video_bktr.o -MD -MP -MF $depbase.Tpo -c -o video_bktr.o video_bktr.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo netcam.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT netcam.o -MD -MP -MF $depbase.Tpo -c -o netcam.o netcam.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo netcam_http.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT netcam_http.o -MD -MP -MF $depbase.Tpo -c -o netcam_http.o netcam_http.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo netcam_ftp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT netcam_ftp.o -MD -MP -MF $depbase.Tpo -c -o netcam_ftp.o netcam_ftp.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo netcam_jpeg.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT netcam_jpeg.o -MD -MP -MF $depbase.Tpo -c -o netcam_jpeg.o netcam_jpeg.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo netcam_wget.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT netcam_wget.o -MD -MP -MF $depbase.Tpo -c -o netcam_wget.o netcam_wget.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo netcam_rtsp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT netcam_rtsp.o -MD -MP -MF $depbase.Tpo -c -o netcam_rtsp.o netcam_rtsp.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo track.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT track.o -MD -MP -MF $depbase.Tpo -c -o track.o track.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo alg.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT alg.o -MD -MP -MF $depbase.Tpo -c -o alg.o alg.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo event.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT event.o -MD -MP -MF $depbase.Tpo -c -o event.o event.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo picture.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT picture.o -MD -MP -MF $depbase.Tpo -c -o picture.o picture.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo rotate.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT rotate.o -MD -MP -MF $depbase.Tpo -c -o rotate.o rotate.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo translate.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT translate.o -MD -MP -MF $depbase.Tpo -c -o translate.o translate.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo md5.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT md5.o -MD -MP -MF $depbase.Tpo -c -o md5.o md5.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo stream.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT stream.o -MD -MP -MF $depbase.Tpo -c -o stream.o stream.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo ffmpeg.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT ffmpeg.o -MD -MP -MF $depbase.Tpo -c -o ffmpeg.o ffmpeg.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo webu.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT webu.o -MD -MP -MF $depbase.Tpo -c -o webu.o webu.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo webu_html.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT webu_html.o -MD -MP -MF $depbase.Tpo -c -o webu_html.o webu_html.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo webu_stream.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT webu_stream.o -MD -MP -MF $depbase.Tpo -c -o webu_stream.o webu_stream.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo webu_text.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT webu_text.o -MD -MP -MF $depbase.Tpo -c -o webu_text.o webu_text.c &&\ mv -f $depbase.Tpo $depbase.Po depbase=`echo mmalcam.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT mmalcam.o -MD -MP -MF $depbase.Tpo -c -o mmalcam.o mmalcam.c &&\ mv -f $depbase.Tpo $depbase.Po mmalcam.c:21:10: fatal error: interface/mmal/mmal.h: No such file or directory #include "interface/mmal/mmal.h" ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[2]: *** [Makefile:471: mmalcam.o] Error 1 make[2]: Leaving directory '/usr/local/src/motion/src' make[1]: *** [Makefile:553: all-recursive] Error 1 make[1]: Leaving directory '/usr/local/src/motion' make: *** [Makefile:397: all] Error 2 Making install in src make[1]: Entering directory '/usr/local/src/motion/src' depbase=`echo mmalcam.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ gcc -DHAVE_CONFIG_H -I. -I.. -Dsysconfdir=\"/usr/local/etc/motion\" -DLOCALEDIR=\"/usr/local/share/locale\" -D_THREAD_SAFE -I/usr/include/p11-kit-1 -Irasppicam -I/usr/include/aarch64-linux-gnu -g -O2 -MT mmalcam.o -MD -MP -MF $depbase.Tpo -c -o mmalcam.o mmalcam.c &&\ mv -f $depbase.Tpo $depbase.Po mmalcam.c:21:10: fatal error: interface/mmal/mmal.h: No such file or directory #include "interface/mmal/mmal.h" ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[1]: *** [Makefile:471: mmalcam.o] Error 1 make[1]: Leaving directory '/usr/local/src/motion/src' make: *** [Makefile:553: install-recursive] Error 1 usermod: group 'motion' does not exist ***************************************************************************************************** * Installation de motion terminé * *****************************************************************************************************