******************************************************** * Installation deconz * ******************************************************** Hit:1 http://phoscon.de/apt/deconz buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:4 https://deb.nodesource.com/node_12.x buster InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... libqt5serialport5 is already the newest version (5.11.3-2). libqt5websockets5 is already the newest version (5.11.3-5). The following packages were automatically installed and are no longer required: python-bcrypt python-blinker python-fasteners python-jwt python-lockfile python-monotonic python-nacl python-oauthlib python-paramiko python-pexpect python-ptyprocess python-pyasn1 rpi-eeprom-images wiringpi Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up nginx-full (1.14.2-2+deb10u3) ... Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details. invoke-rc.d: initscript nginx, action "start" failed. * nginx.service - A high performance web server and a reverse proxy server Loaded: loaded (]8;;file://raspberrypi/lib/systemd/system/nginx.service/lib/systemd/system/nginx.service]8;;; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Mon 2020-10-26 20:23:35 GMT; 47ms ago Docs: ]8;;man:nginx(8)man:nginx(8)]8;; Process: 28620 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 28621 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=1/FAILURE) Oct 26 20:23:33 raspberrypi nginx[28621]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:33 raspberrypi nginx[28621]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:34 raspberrypi nginx[28621]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:34 raspberrypi nginx[28621]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:34 raspberrypi nginx[28621]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:34 raspberrypi nginx[28621]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:35 raspberrypi nginx[28621]: nginx: [emerg] still could not bind() Oct 26 20:23:35 raspberrypi systemd[1]: nginx.service: Control process exited, code=exited, status=1/FAILURE Oct 26 20:23:35 raspberrypi systemd[1]: nginx.service: Failed with result 'exit-code'. Oct 26 20:23:35 raspberrypi systemd[1]: Failed to start A high performance web server and a reverse proxy server. dpkg: error processing package nginx-full (--configure): installed nginx-full package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of nginx: nginx depends on nginx-full (<< 1.14.2-2+deb10u3.1~) | nginx-light (<< 1.14.2-2+deb10u3.1~) | nginx-extras (<< 1.14.2-2+deb10u3.1~); however: Package nginx-full is not configured yet. Package nginx-light is not installed. Package nginx-extras is not installed. nginx depends on nginx-full (>= 1.14.2-2+deb10u3) | nginx-light (>= 1.14.2-2+deb10u3) | nginx-extras (>= 1.14.2-2+deb10u3); however: Package nginx-full is not configured yet. Package nginx-light is not installed. Package nginx-extras is not installed. dpkg: error processing package nginx (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: nginx-full nginx E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Building dependency tree... Reading state information... sqlite3 is already the newest version (3.27.2-3). The following packages were automatically installed and are no longer required: python-bcrypt python-blinker python-fasteners python-jwt python-lockfile python-monotonic python-nacl python-oauthlib python-paramiko python-pexpect python-ptyprocess python-pyasn1 rpi-eeprom-images wiringpi Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up nginx-full (1.14.2-2+deb10u3) ... Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details. invoke-rc.d: initscript nginx, action "start" failed. * nginx.service - A high performance web server and a reverse proxy server Loaded: loaded (]8;;file://raspberrypi/lib/systemd/system/nginx.service/lib/systemd/system/nginx.service]8;;; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Mon 2020-10-26 20:23:42 GMT; 46ms ago Docs: ]8;;man:nginx(8)man:nginx(8)]8;; Process: 28819 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 28820 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=1/FAILURE) Oct 26 20:23:40 raspberrypi nginx[28820]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:40 raspberrypi nginx[28820]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:41 raspberrypi nginx[28820]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:41 raspberrypi nginx[28820]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:41 raspberrypi nginx[28820]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:41 raspberrypi nginx[28820]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:42 raspberrypi nginx[28820]: nginx: [emerg] still could not bind() Oct 26 20:23:42 raspberrypi systemd[1]: nginx.service: Control process exited, code=exited, status=1/FAILURE Oct 26 20:23:42 raspberrypi systemd[1]: nginx.service: Failed with result 'exit-code'. Oct 26 20:23:42 raspberrypi systemd[1]: Failed to start A high performance web server and a reverse proxy server. dpkg: error processing package nginx-full (--configure): installed nginx-full package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of nginx: nginx depends on nginx-full (<< 1.14.2-2+deb10u3.1~) | nginx-light (<< 1.14.2-2+deb10u3.1~) | nginx-extras (<< 1.14.2-2+deb10u3.1~); however: Package nginx-full is not configured yet. Package nginx-light is not installed. Package nginx-extras is not installed. nginx depends on nginx-full (>= 1.14.2-2+deb10u3) | nginx-light (>= 1.14.2-2+deb10u3) | nginx-extras (>= 1.14.2-2+deb10u3); however: Package nginx-full is not configured yet. Package nginx-light is not installed. Package nginx-extras is not installed. dpkg: error processing package nginx (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: nginx-full nginx E: Sub-process /usr/bin/dpkg returned an error code (1) It's armv7l, RPI Adding user root to group dialout --2020-10-26 20:23:44-- http://phoscon.de/apt/deconz.pub.key Resolving phoscon.de (phoscon.de)... 144.76.96.194 Connecting to phoscon.de (phoscon.de)|144.76.96.194|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1692 (1.7K) [application/octet-stream] Saving to: 'STDOUT' 0K . 100% 51.4M=0s 2020-10-26 20:23:44 (51.4 MB/s) - written to stdout [1692/1692] Warning: apt-key output should not be parsed (stdout is not a terminal) OK Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://phoscon.de/apt/deconz buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_12.x buster InRelease Reading package lists... WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... deconz is already the newest version (2.05.84-raspbian-buster-stable). The following packages were automatically installed and are no longer required: python-bcrypt python-blinker python-fasteners python-jwt python-lockfile python-monotonic python-nacl python-oauthlib python-paramiko python-pexpect python-ptyprocess python-pyasn1 rpi-eeprom-images wiringpi Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up nginx-full (1.14.2-2+deb10u3) ... Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details. invoke-rc.d: initscript nginx, action "start" failed. * nginx.service - A high performance web server and a reverse proxy server Loaded: loaded (]8;;file://raspberrypi/lib/systemd/system/nginx.service/lib/systemd/system/nginx.service]8;;; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Mon 2020-10-26 20:23:55 GMT; 20ms ago Docs: ]8;;man:nginx(8)man:nginx(8)]8;; Process: 29518 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 29519 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=1/FAILURE) Oct 26 20:23:54 raspberrypi nginx[29519]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:54 raspberrypi nginx[29519]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:54 raspberrypi nginx[29519]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:54 raspberrypi nginx[29519]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:55 raspberrypi nginx[29519]: nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) Oct 26 20:23:55 raspberrypi nginx[29519]: nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) Oct 26 20:23:55 raspberrypi nginx[29519]: nginx: [emerg] still could not bind() Oct 26 20:23:55 raspberrypi systemd[1]: nginx.service: Control process exited, code=exited, status=1/FAILURE Oct 26 20:23:55 raspberrypi systemd[1]: nginx.service: Failed with result 'exit-code'. Oct 26 20:23:55 raspberrypi systemd[1]: Failed to start A high performance web server and a reverse proxy server. dpkg: error processing package nginx-full (--configure): installed nginx-full package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of nginx: nginx depends on nginx-full (<< 1.14.2-2+deb10u3.1~) | nginx-light (<< 1.14.2-2+deb10u3.1~) | nginx-extras (<< 1.14.2-2+deb10u3.1~); however: Package nginx-full is not configured yet. Package nginx-light is not installed. Package nginx-extras is not installed. nginx depends on nginx-full (>= 1.14.2-2+deb10u3) | nginx-light (>= 1.14.2-2+deb10u3) | nginx-extras (>= 1.14.2-2+deb10u3); however: Package nginx-full is not configured yet. Package nginx-light is not installed. Package nginx-extras is not installed. dpkg: error processing package nginx (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: nginx-full nginx E: Sub-process /usr/bin/dpkg returned an error code (1) ******************************************************** * Installation terminée * ********************************************************