Production solaire 99.77 W   PF 0.90
Export/Import(-) -16.90 W   PF 0.16
Voltage 242.64V
Switch
100 W
Timer Timer
Weekly schedule Weekly schedule
internet img Internet & Security
Safety Safety
Actions Actions
Device info Settings

Timers

Auto OFF

Auto ON

Weekly schedule

Schedule timer

Shelly device can turn automatically on/off at given time. This feature works only if you have connection to the Internet and Shelly was able to synchronize the time.

Internet & Security

WiFi mode - Client

WiFi Client Backup

WiFi Client AP Roaming


RSSI signal strength value below which the device will periodically scan for better access point:

WiFi mode - Access Point

RESTRICT LOGIN

SNTP Server

Server:

Advanced - Developer Settings

CoIoT peer:

Enter mcast for multicast or ip:port for unicast.

Restart required when CoIoT peer is changed!

WARNING: If you enable MQTT - actions via Cloud connection will be disabled!

Username:

Password:

Server:

Custom MQTT prefix:

Max QoS

Cloud

Connecting your Shelly to its cloud allows you to control it remotely, receive notifications and updates about your devices.

WARNING: If you disable the device cloud support, you will lose connection to your device from outside its local network!

Safety

Channel 1 max power protection

Configure the switch to turn off when power consumption reach (W):

Channel 2 max power protection

Configure the switch to turn off when power consumption reach (W):

Actions

Output switched ON url

Url to be hit when the output is switched ON

Ðœore than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Output switched OFF url

Url to be hit when the output is switched OFF

Ðœore than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Channel 1 over power

Url to be hit:

Ðœore than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Channel 1 under power

Url to be hit:

Ðœore than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Channel 2 over power

Url to be hit:

Ðœore than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Channel 2 under power

Url to be hit:

Ðœore than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Settings

POWER ON DEFAULT MODE

Current transformer type

Channel 1:
Channel 2:

LED LIGHT CONTROL

Firmware Update

Current version: 20230913-114150/v1.14.0-gcb84623
You have latest version on your device!

Time zone and Geo-location

Timezone Settings

Daylight saving time:

Approximate geo-location

Device name

Name:

Channel 1 name

Name:

Channel 2 name

Name:

Set date/time

Time and date manual setting:
:

ERASE ENERGY DATA

Erase saved energy measurements data on this device.

Factory reset

Resetting your Shelly will bring it to its factory settings, it will disconnect from your WiFi network and all associated users, including you, will be removed from this device.

WARNING: Factory resetting of this device will remove it from your account and you will have to add it as it is new one (while you are in the range of your device) before you can control it again! WARNING: Factory resetting of this device will erase all saved data!

Device reboot

Reboot your Shelly device.

Device discoverable

Eco mode

Device Info

Do not activate logging without reason. It will slow down the device and cause aging of the flash memory.