{
  "AA": {
    "Type": "Alarm - Panel Substitution",
    "Description": "An attempt to substitute an alternate alarm panel for a secure panel has been made"
  },
  "AB": {
    "Type": "Abort",
    "Description": "An event message was not sent due to User action"
  },
  "AN": {
    "Type": "Analog Restoral",
    "Description": "An analog fire sensor has been restored to normal operation"
  },
  "AR": {
    "Type": "AC Restoral",
    "Description": "AC power has been restored"
  },
  "AS": {
    "Type": "Analog Service",
    "Description": "An analog fire sensor needs to be cleaned or calibrated"
  },
  "AT": {
    "Type": "AC Trouble",
    "Description": "AC power has been failed"
  },
  "BA": {
    "Type": "Burglary Alarm",
    "Description": "Burglary zone has been violated while armed"
  },
  "BB": {
    "Type": "Burglary Bypass",
    "Description": "Burglary zone has been bypassed"
  },
  "BC": {
    "Type": "Burglary Cancel",
    "Description": "Alarm has been cancelled by authorized user"
  },
  "BD": {
    "Type": "Swinger Trouble",
    "Description": "A non-fire zone has been violated after a Swinger Shutdown on the zone"
  },
  "BE": {
    "Type": "Swinger Trouble Restore",
    "Description": "A non-fire zone restores to normal from a Swinger Trouble state"
  },
  "BG": {
    "Type": "Unverified Event - Burglary",
    "Description": "A point assigned to a Cross Point group has gone into alarm but the Cross Point remained normal"
  },
  "BH": {
    "Type": "Burglary Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "BJ": {
    "Type": "Burglary Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "BM": {
    "Type": "Burglary Alarm - Cross Point",
    "Description": "Burglary alarm w/cross point also in alarm - alarm verified"
  },
  "BR": {
    "Type": "Burglary Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "BS": {
    "Type": "Burglary Supervisory",
    "Description": "Unsafe intrusion detection system condition"
  },
  "BT": {
    "Type": "Burglary Trouble",
    "Description": "Burglary zone disabled by fault"
  },
  "BU": {
    "Type": "Burglary Unbypass",
    "Description": "Zone bypass has been removed"
  },
  "BV": {
    "Type": "Burglary Verified",
    "Description": "A burglary alarm has occurred and been verified within programmed conditions. (zone or point not sent)"
  },
  "BX": {
    "Type": "Burglary Test",
    "Description": "Burglary zone activated during testing"
  },
  "BZ": {
    "Type": "Missing Supervision",
    "Description": "A non-fire Supervisory point has gone missing"
  },
  "CA": {
    "Type": "Automatic Closing",
    "Description": "System armed automatically"
  },
  "CD": {
    "Type": "Closing Delinquent",
    "Description": "The system has not been armed for a programmed amount of time"
  },
  "CE": {
    "Type": "Closing Extend",
    "Description": "Extend closing time"
  },
  "CF": {
    "Type": "Forced Closing",
    "Description": "System armed, some zones not ready"
  },
  "CG": {
    "Type": "Close Area",
    "Description": "System has been partially armed"
  },
  "CI": {
    "Type": "Fail to Close",
    "Description": "An area has not been armed at the end of the closing window"
  },
  "CJ": {
    "Type": "Late Close",
    "Description": "An area was armed after the closing window"
  },
  "CK": {
    "Type": "Early Close",
    "Description": "An area was armed before the closing window"
  },
  "CL": {
    "Type": "Closing Report",
    "Description": "System armed, normal"
  },
  "CM": {
    "Type": "Missing Alarm - Recent Closing",
    "Description": "A point has gone missing within 2 minutes of closing"
  },
  "CO": {
    "Type": "Command Sent",
    "Description": "A command has been sent to an expansion/peripheral device"
  },
  "CP": {
    "Type": "Automatic Closing",
    "Description": "System armed automatically"
  },
  "CQ": {
    "Type": "Remote Closing",
    "Description": "The system was armed from a remote location"
  },
  "CR": {
    "Type": "Recent Closing",
    "Description": "An alarm occurred within five minutes after the system was closed"
  },
  "CS": {
    "Type": "Closing Keyswitch",
    "Description": "Account has been armed by keyswitch"
  },
  "CT": {
    "Type": "Late to Open",
    "Description": "System was not disarmed on time"
  },
  "CW": {
    "Type": "Was Force Armed",
    "Description": "Header for a force armed session, forced point msgs may follow"
  },
  "CX": {
    "Type": "Custom Function Executed",
    "Description": "The panel has executed a preprogrammed set of instructions"
  },
  "CZ": {
    "Type": "Point Closing",
    "Description": "A point, as opposed to a whole area or account, has closed"
  },
  "DA": {
    "Type": "Card Assigned",
    "Description": "An access ID has been added to the controller"
  },
  "DB": {
    "Type": "Card Deleted",
    "Description": "An access ID has been deleted from the controller"
  },
  "DC": {
    "Type": "Access Closed",
    "Description": "Access to all users prohibited"
  },
  "DD": {
    "Type": "Access Denied",
    "Description": "Access denied, unknown code"
  },
  "DE": {
    "Type": "Request to Enter",
    "Description": "An access point was opened via a Request to Enter device"
  },
  "DF": {
    "Type": "Door Forced",
    "Description": "Door opened without access request"
  },
  "DG": {
    "Type": "Access Granted",
    "Description": "Door access granted"
  },
  "DH": {
    "Type": "Door Left Open - Restoral",
    "Description": "An access point in a Door Left Open state has restored"
  },
  "DI": {
    "Type": "Access Denied - Passback",
    "Description": "Access denied because credential has not exited area before attempting to re-enter same area"
  },
  "DJ": {
    "Type": "Door Forced - Trouble",
    "Description": "An access point has been forced open in an unarmed area"
  },
  "DK": {
    "Type": "Access Lockout",
    "Description": "Access denied, known code"
  },
  "DL": {
    "Type": "Door Left Open - Alarm",
    "Description": "An open access point when open time expired in an armed area"
  },
  "DM": {
    "Type": "Door Left Open - Trouble",
    "Description": "An open access point when open time expired in an unarmed area"
  },
  "DN": {
    "Type": "Door Left Open (non-alarm, non-trouble)",
    "Description": "An access point was open when the door cycle time expired"
  },
  "DO": {
    "Type": "Access Open",
    "Description": "Access to authorized users allowed"
  },
  "DP": {
    "Type": "Access Denied - Unauthorized Time",
    "Description": "An access request was denied because the request is occurring outside the user's authorized time window(s)"
  },
  "DQ": {
    "Type": "Access Denied - Unauthorized Arming State",
    "Description": "An access request was denied because the user was not authorized in this area when the area was armed"
  },
  "DR": {
    "Type": "Door Restoral",
    "Description": "Access alarm/trouble condition eliminated"
  },
  "DS": {
    "Type": "Door Station",
    "Description": "Identifies door for next report"
  },
  "DT": {
    "Type": "Access Trouble",
    "Description": "Access system trouble"
  },
  "DU": {
    "Type": "Dealer ID",
    "Description": "Dealer ID number"
  },
  "DV": {
    "Type": "Access Denied - Unauthorized Entry Level",
    "Description": "An access request was denied because the user is not authorized in this area"
  },
  "DW": {
    "Type": "Access Denied - Interlock",
    "Description": "An access request was denied because the doors associated Interlock point is open"
  },
  "DX": {
    "Type": "Request to Exit",
    "Description": "An access point was opened via a Request to Exit device"
  },
  "DY": {
    "Type": "Door Locked",
    "Description": "The door's lock has been engaged"
  },
  "DZ": {
    "Type": "Access Denied - Door Secured",
    "Description": "An access request was denied because the door has been placed in an Access Closed state"
  },
  "EA": {
    "Type": "Exit Alarm",
    "Description": "An exit zone remained violated at the end of the exit delay period"
  },
  "EE": {
    "Type": "Exit Error",
    "Description": "An exit zone remained violated at the end of the exit delay period"
  },
  "EJ": {
    "Type": "Expansion Tamper Restore",
    "Description": "Expansion device tamper restoral"
  },
  "EM": {
    "Type": "Expansion Device Missing",
    "Description": "Expansion device missing"
  },
  "EN": {
    "Type": "Expansion Missing Restore",
    "Description": "Expansion device communications re-established"
  },
  "ER": {
    "Type": "Expansion Restoral",
    "Description": "Expansion device trouble eliminated"
  },
  "ES": {
    "Type": "Expansion Device Tamper",
    "Description": "Expansion device enclosure tamper"
  },
  "ET": {
    "Type": "Expansion Trouble",
    "Description": "Expansion device trouble"
  },
  "EX": {
    "Type": "External Device Condition",
    "Description": "A specific reportable condition is detected on an external device"
  },
  "EZ": {
    "Type": "Missing Alarm - Exit Error",
    "Description": "A point remained missing at the end of the exit delay period"
  },
  "FA": {
    "Type": "Fire Alarm",
    "Description": "Fire condition detected"
  },
  "FB": {
    "Type": "Fire Bypass",
    "Description": "Zone has been bypassed"
  },
  "FC": {
    "Type": "Fire Cancel",
    "Description": "A Fire Alarm has been cancelled by an authorized person"
  },
  "FG": {
    "Type": "Unverified Event - Fire",
    "Description": "A point assigned to a Cross Point group has gone into alarm but the Cross Point remained normal"
  },
  "FH": {
    "Type": "Fire Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "FI": {
    "Type": "Fire Test Begin",
    "Description": "The transmitter area's fire test has begun"
  },
  "FJ": {
    "Type": "Fire Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "FK": {
    "Type": "Fire Test End",
    "Description": "The transmitter area's fire test has ended"
  },
  "FL": {
    "Type": "Fire Alarm Silenced",
    "Description": "The fire panel's sounder was silenced by command"
  },
  "FM": {
    "Type": "Fire Alarm - Cross Point",
    "Description": "Fire Alarm with Cross Point also in alarm verifying the Fire Alarm"
  },
  "FQ": {
    "Type": "Fire Supervisory Trouble Restore",
    "Description": "A fire supervisory zone that was in trouble condition has now restored to normal"
  },
  "FR": {
    "Type": "Fire Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "FS": {
    "Type": "Fire Supervisory",
    "Description": "Unsafe fire detection system condition"
  },
  "FT": {
    "Type": "Fire Trouble",
    "Description": "Zone disabled by fault"
  },
  "FU": {
    "Type": "Fire Unbypass",
    "Description": "Bypass has been removed"
  },
  "FV": {
    "Type": "Fire Supervision Restore",
    "Description": "A fire supervision zone that was in alarm has restored to normal"
  },
  "FW": {
    "Type": "Fire Supervisory Trouble",
    "Description": "A fire supervisory zone is now in a trouble condition"
  },
  "FX": {
    "Type": "Fire Test",
    "Description": "Fire zone activated during test"
  },
  "FY": {
    "Type": "Missing Fire Trouble",
    "Description": "A fire point is now logically missing"
  },
  "FZ": {
    "Type": "Missing Fire Supervision",
    "Description": "A Fire Supervisory point has gone missing"
  },
  "GA": {
    "Type": "Gas Alarm",
    "Description": "Gas alarm condition detected"
  },
  "GB": {
    "Type": "Gas Bypass",
    "Description": "Zone has been bypassed"
  },
  "GH": {
    "Type": "Gas Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "GJ": {
    "Type": "Gas Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "GR": {
    "Type": "Gas Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "GS": {
    "Type": "Gas Supervisory",
    "Description": "Unsafe gas detection system condition"
  },
  "GT": {
    "Type": "Gas Trouble",
    "Description": "Zone disabled by fault"
  },
  "GU": {
    "Type": "Gas Unbypass",
    "Description": "Bypass has been removed"
  },
  "GX": {
    "Type": "Gas Test",
    "Description": "Zone activated during test"
  },
  "HA": {
    "Type": "Holdup Alarm",
    "Description": "Silent alarm, user under duress"
  },
  "HB": {
    "Type": "Holdup Bypass",
    "Description": "Zone has been bypassed"
  },
  "HH": {
    "Type": "Holdup Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "HJ": {
    "Type": "Holdup Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "HR": {
    "Type": "Holdup Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "HS": {
    "Type": "Holdup Supervisory",
    "Description": "Unsafe holdup system condition"
  },
  "HT": {
    "Type": "Holdup Trouble",
    "Description": "Zone disabled by fault"
  },
  "HU": {
    "Type": "Holdup Unbypass",
    "Description": "Bypass has been removed"
  },
  "IA": {
    "Type": "Equipment Failure Condition",
    "Description": "A specific, reportable condition is detected on a device"
  },
  "IR": {
    "Type": "Equipment Fail - Restoral",
    "Description": "The equipment condition has been restored to normal"
  },
  "JA": {
    "Type": "User Code Tamper",
    "Description": "Too many unsuccessful attempts have been made to enter a user ID"
  },
  "JD": {
    "Type": "Date Changed",
    "Description": "The date was changed in the transmitter/receiver"
  },
  "JH": {
    "Type": "Holiday Changed",
    "Description": "The transmitter's holiday schedule has been changed"
  },
  "JK": {
    "Type": "Latchkey Alert",
    "Description": "A designated user passcode has not been entered during a scheduled time window"
  },
  "JL": {
    "Type": "Log Threshold",
    "Description": "The transmitter's log memory has reached its threshold level"
  },
  "JO": {
    "Type": "Log Overflow",
    "Description": "The transmitter's log memory has overflowed"
  },
  "JP": {
    "Type": "User On Premises",
    "Description": "A designated user passcode has been used to gain access to the premises."
  },
  "JR": {
    "Type": "Schedule Executed",
    "Description": "An automatic scheduled event was executed"
  },
  "JS": {
    "Type": "Schedule Changed",
    "Description": "An automatic schedule was changed"
  },
  "JT": {
    "Type": "Time Changed",
    "Description": "The time was changed in the transmitter/receiver"
  },
  "JV": {
    "Type": "User Code Changed",
    "Description": "A user's code has been changed"
  },
  "JX": {
    "Type": "User Code Deleted",
    "Description": "A user's code has been removed"
  },
  "JY": {
    "Type": "User Code Added",
    "Description": "A user's code has been added"
  },
  "JZ": {
    "Type": "User Level Set",
    "Description": "A user's authority level has been set"
  },
  "KA": {
    "Type": "Heat Alarm",
    "Description": "High temperature detected on premise"
  },
  "KB": {
    "Type": "Heat Bypass",
    "Description": "Zone has been bypassed"
  },
  "KH": {
    "Type": "Heat Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "KJ": {
    "Type": "Heat Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "KR": {
    "Type": "Heat Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "KS": {
    "Type": "Heat Supervisory",
    "Description": "Unsafe heat detection system condition"
  },
  "KT": {
    "Type": "Heat Trouble",
    "Description": "Zone disabled by fault"
  },
  "KU": {
    "Type": "Heat Unbypass",
    "Description": "Bypass has been removed"
  },
  "LB": {
    "Type": "Local Program",
    "Description": "Begin local programming"
  },
  "LD": {
    "Type": "Local Program Denied",
    "Description": "Access code incorrect"
  },
  "LE": {
    "Type": "Listen-in Ended",
    "Description": "The listen-in session has been terminated"
  },
  "LF": {
    "Type": "Listen-in Begin",
    "Description": "The listen-in session with the RECEIVER has begun"
  },
  "LR": {
    "Type": "Phone Line Restoral",
    "Description": "Phone line restored to service"
  },
  "LS": {
    "Type": "Local Program Success",
    "Description": "Local programming successful"
  },
  "LT": {
    "Type": "Phone Line Trouble",
    "Description": "Phone line trouble report"
  },
  "LU": {
    "Type": "Local Program Fail",
    "Description": "Local programming unsuccessful"
  },
  "LX": {
    "Type": "Local Programming Ended",
    "Description": "A local programming session has been terminated"
  },
  "MA": {
    "Type": "Medical Alarm",
    "Description": "Emergency assistance request"
  },
  "MB": {
    "Type": "Medical Bypass",
    "Description": "Zone has been bypassed"
  },
  "MH": {
    "Type": "Medical Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "MI": {
    "Type": "Message",
    "Description": "A canned message is being sent"
  },
  "MJ": {
    "Type": "Medical Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "MR": {
    "Type": "Medical Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "MS": {
    "Type": "Medical Supervisory",
    "Description": "Unsafe system condition exists"
  },
  "MT": {
    "Type": "Medical Trouble",
    "Description": "Zone disabled by fault"
  },
  "MU": {
    "Type": "Medical Unbypass",
    "Description": "Bypass has been removed"
  },
  "NA": {
    "Type": "No Activity",
    "Description": "There has been no zone activity for a programmed amount of time"
  },
  "NC": {
    "Type": "Network Condition",
    "Description": "A communications network has a specific reportable condition"
  },
  "NF": {
    "Type": "Forced Perimeter Arm",
    "Description": "Some zones/points not ready"
  },
  "NL": {
    "Type": "Perimeter Armed",
    "Description": "An area has been perimeter armed"
  },
  "NM": {
    "Type": "Perimeter Armed, User Defined",
    "Description": "A user defined area has been perimeter armed"
  },
  "NR": {
    "Type": "Network Restoral",
    "Description": "A communications network has returned to normal operation"
  },
  "NS": {
    "Type": "Activity Resumed",
    "Description": "A zone has detected activity after an alert"
  },
  "NT": {
    "Type": "Network Failure",
    "Description": "A communications network has failed"
  },
  "OA": {
    "Type": "Automatic Opening",
    "Description": "System has disarmed automatically"
  },
  "OC": {
    "Type": "Cancel Report",
    "Description": "Untyped zone cancel"
  },
  "OG": {
    "Type": "Open Area",
    "Description": "System has been partially disarmed"
  },
  "OH": {
    "Type": "Early to Open from Alarm",
    "Description": "An area in alarm was disarmed before the opening window"
  },
  "OI": {
    "Type": "Fail to Open",
    "Description": "An area has not been armed at the end of the opening window"
  },
  "OJ": {
    "Type": "Late Open",
    "Description": "An area was disarmed after the opening window"
  },
  "OK": {
    "Type": "Early Open",
    "Description": "An area was disarmed before the opening window"
  },
  "OL": {
    "Type": "Late to Open from Alarm",
    "Description": "An area in alarm was disarmed after the opening window"
  },
  "OP": {
    "Type": "Opening Report",
    "Description": "Account was disarmed"
  },
  "OQ": {
    "Type": "Remote Opening",
    "Description": "The system was disarmed from a remote location"
  },
  "OR": {
    "Type": "Disarm From Alarm",
    "Description": "Account in alarm was reset/disarmed"
  },
  "OS": {
    "Type": "Opening Keyswitch",
    "Description": "Account has been disarmed by keyswitch"
  },
  "OT": {
    "Type": "Late To Close",
    "Description": "System was not armed on time"
  },
  "OU": {
    "Type": "Output State - Trouble",
    "Description": "An output on a peripheral device or NAC is not functioning"
  },
  "OV": {
    "Type": "Output State - Restore",
    "Description": "An output on a peripheral device or NAC is back to normal operation"
  },
  "OZ": {
    "Type": "Point Opening",
    "Description": "A point, rather than a full area or account, disarmed"
  },
  "PA": {
    "Type": "Panic Alarm",
    "Description": "Emergency assistance request, manually activated"
  },
  "PB": {
    "Type": "Panic Bypass",
    "Description": "Panic zone has been bypassed"
  },
  "PH": {
    "Type": "Panic Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "PJ": {
    "Type": "Panic Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "PR": {
    "Type": "Panic Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "PS": {
    "Type": "Panic Supervisory",
    "Description": "Unsafe system condition exists"
  },
  "PT": {
    "Type": "Panic Trouble",
    "Description": "Zone disabled by fault"
  },
  "PU": {
    "Type": "Panic Unbypass",
    "Description": "Panic zone bypass has been removed"
  },
  "QA": {
    "Type": "Emergency Alarm",
    "Description": "Emergency assistance request"
  },
  "QB": {
    "Type": "Emergency Bypass",
    "Description": "Zone has been bypassed"
  },
  "QH": {
    "Type": "Emergency Alarm Restore",
    "Description": "Alarm condition has been eliminated"
  },
  "QJ": {
    "Type": "Emergency Trouble Restore",
    "Description": "Trouble condition has been eliminated"
  },
  "QR": {
    "Type": "Emergency Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "QS": {
    "Type": "Emergency Supervisory",
    "Description": "Unsafe system condition exists"
  },
  "QT": {
    "Type": "Emergency Trouble",
    "Description": "Zone disabled by fault"
  },
  "QU": {
    "Type": "Emergency Unbypass",
    "Description": "Bypass has been removed"
  },
  "RA": {
    "Type": "Remote Programmer Call Failed",
    "Description": "Transmitter failed to communicate with the remote programmer"
  },
  "RB": {
    "Type": "Remote Program Begin",
    "Description": "Remote programming session initiated"
  },
  "RC": {
    "Type": "Relay Close",
    "Description": "A relay has energized"
  },
  "RD": {
    "Type": "Remote Program Denied",
    "Description": "Access passcode incorrect"
  },
  "RN": {
    "Type": "Remote Reset",
    "Description": "A TRANSMITTER was reset via a remote programmer"
  },
  "RO": {
    "Type": "Relay Open",
    "Description": "A relay has de-energized"
  },
  "RP": {
    "Type": "Automatic Test",
    "Description": "Automatic communication test report"
  },
  "RR": {
    "Type": "Power Up",
    "Description": "System lost power, is now restored"
  },
  "RS": {
    "Type": "Remote Program Success",
    "Description": "Remote programming successful"
  },
  "RT": {
    "Type": "Data Lost",
    "Description": "Dialer data lost, transmission error"
  },
  "RU": {
    "Type": "Remote Program Fail",
    "Description": "Remote programming unsuccessful"
  },
  "RX": {
    "Type": "Manual Test",
    "Description": "Manual communication test report"
  },
  "RY": {
    "Type": "Test Off Normal",
    "Description": "Test signal(s) indicates abnormal condition(s) exist"
  },
  "SA": {
    "Type": "Sprinkler Alarm",
    "Description": "Sprinkler flow condition exists"
  },
  "SB": {
    "Type": "Sprinkler Bypass",
    "Description": "Sprinkler zone has been bypassed"
  },
  "SC": {
    "Type": "Change of State",
    "Description": "An expansion/peripheral device is reporting a new condition or state change"
  },
  "SH": {
    "Type": "Sprinkler Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "SJ": {
    "Type": "Sprinkler Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "SR": {
    "Type": "Sprinkler Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "SS": {
    "Type": "Sprinkler Supervisory",
    "Description": "Unsafe sprinkler system condition"
  },
  "ST": {
    "Type": "Sprinkler Trouble",
    "Description": "Zone disabled by fault"
  },
  "SU": {
    "Type": "Sprinkler Unbypass",
    "Description": "Sprinkler zone bypass has been removed"
  },
  "TA": {
    "Type": "Tamper Alarm",
    "Description": "Alarm equipment enclosure opened"
  },
  "TB": {
    "Type": "Tamper Bypass",
    "Description": "Tamper detection has been bypassed"
  },
  "TC": {
    "Type": "All Points Tested",
    "Description": "All point tested"
  },
  "TE": {
    "Type": "Test End",
    "Description": "Communicator restored to operation"
  },
  "TH": {
    "Type": "Tamper Alarm Restore",
    "Description": "An Expansion Device's tamper switch restores to normal from an Alarm state"
  },
  "TJ": {
    "Type": "Tamper Trouble Restore",
    "Description": "An Expansion Device's tamper switch restores to normal from a Trouble state"
  },
  "TP": {
    "Type": "Walk Test Point",
    "Description": "This point was tested during a Walk Test"
  },
  "TR": {
    "Type": "Tamper Restoral",
    "Description": "Alarm equipment enclosure has been closed"
  },
  "TS": {
    "Type": "Test Start",
    "Description": "Communicator taken out of operation"
  },
  "TT": {
    "Type": "Tamper Trouble",
    "Description": "Equipment enclosure opened in disarmed state"
  },
  "TU": {
    "Type": "Tamper Unbypass",
    "Description": "Tamper detection bypass has been removed"
  },
  "TW": {
    "Type": "Area Watch Start",
    "Description": "Area watch feature has been activated"
  },
  "TX": {
    "Type": "Test Report",
    "Description": "An unspecified (manual or automatic) communicator test"
  },
  "TZ": {
    "Type": "Area Watch End",
    "Description": "Area watch feature has been deactivated"
  },
  "UA": {
    "Type": "Untyped Zone Alarm",
    "Description": "Alarm condition from zone of unknown type"
  },
  "UB": {
    "Type": "Untyped Zone Bypass",
    "Description": "Zone of unknown type has been bypassed"
  },
  "UG": {
    "Type": "Unverified Event - Untyped",
    "Description": "A point assigned to a Cross Point group has gone into alarm but the Cross Point remained normal"
  },
  "UH": {
    "Type": "Untyped Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "UJ": {
    "Type": "Untyped Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "UR": {
    "Type": "Untyped Zone Restoral",
    "Description": "Alarm/trouble condition eliminated from zone of unknown type"
  },
  "US": {
    "Type": "Untyped Zone Supervisory",
    "Description": "Unsafe condition from zone of unknown type"
  },
  "UT": {
    "Type": "Untyped Zone Trouble",
    "Description": "Trouble condition from zone of unknown type"
  },
  "UU": {
    "Type": "Untyped Zone Unbypass",
    "Description": "Bypass on zone of unknown type has been removed"
  },
  "UX": {
    "Type": "Undefined",
    "Description": "An undefined alarm condition has occurred"
  },
  "UY": {
    "Type": "Untyped Missing Trouble",
    "Description": "A point or device which was not armed is now logically missing"
  },
  "UZ": {
    "Type": "Untyped Missing Alarm",
    "Description": "A point or device which was armed is now logically missing"
  },
  "VI": {
    "Type": "Printer Paper In",
    "Description": "TRANSMITTER or RECEIVER paper in"
  },
  "VO": {
    "Type": "Printer Paper Out",
    "Description": "TRANSMITTER or RECEIVER paper out"
  },
  "VR": {
    "Type": "Printer Restore",
    "Description": "TRANSMITTER or RECEIVER trouble restored"
  },
  "VT": {
    "Type": "Printer Trouble",
    "Description": "TRANSMITTER or RECEIVER trouble"
  },
  "VX": {
    "Type": "Printer Test",
    "Description": "TRANSMITTER or RECEIVER test"
  },
  "VY": {
    "Type": "Printer Online",
    "Description": "RECEIVER'S printer is now online"
  },
  "VZ": {
    "Type": "Printer Offline",
    "Description": "RECEIVER'S printer is now offline"
  },
  "WA": {
    "Type": "Water Alarm",
    "Description": "Water detected at protected premises"
  },
  "WB": {
    "Type": "Water Bypass",
    "Description": "Water detection has been bypassed"
  },
  "WH": {
    "Type": "Water Alarm Restore",
    "Description": "Water alarm condition eliminated"
  },
  "WJ": {
    "Type": "Water Trouble Restore",
    "Description": "Water trouble condition eliminated"
  },
  "WR": {
    "Type": "Water Restoral",
    "Description": "Water alarm/trouble condition has been eliminated"
  },
  "WS": {
    "Type": "Water Supervisory",
    "Description": "Water unsafe water detection system condition"
  },
  "WT": {
    "Type": "Water Trouble",
    "Description": "Water zone disabled by fault"
  },
  "WU": {
    "Type": "Water Unbypass",
    "Description": "Water detection bypass has been removed"
  },
  "XA": {
    "Type": "Extra Account Report",
    "Description": "CS RECEIVER has received an event from a non-existent account"
  },
  "XE": {
    "Type": "Extra Point",
    "Description": "Panel has sensed an extra point not specified for this site"
  },
  "XF": {
    "Type": "Extra RF Point",
    "Description": "Panel has sensed an extra RF point not specified for this site"
  },
  "XH": {
    "Type": "RF Interference Restoral",
    "Description": "A radio device is no longer detecting RF Interference"
  },
  "XI": {
    "Type": "Sensor Reset",
    "Description": "A user has reset a sensor"
  },
  "XJ": {
    "Type": "RF Receiver Tamper Restoral",
    "Description": "A Tamper condition at a premises RF Receiver has been restored"
  },
  "XL": {
    "Type": "Low Received Signal Strength",
    "Description": "The RF signal strength of a reported event is below minimum level"
  },
  "XM": {
    "Type": "Missing Alarm - Cross Point",
    "Description": "Missing Alarm verified by Cross Point in Alarm (or missing)"
  },
  "XQ": {
    "Type": "RF Interference",
    "Description": "A radio device is detecting RF Interference"
  },
  "XR": {
    "Type": "Transmitter Battery Restoral",
    "Description": "Low battery has been corrected"
  },
  "XS": {
    "Type": "RF Receiver Tamper",
    "Description": "A Tamper condition at a premises receiver is detected"
  },
  "XT": {
    "Type": "Transmitter Battery Trouble",
    "Description": "Low battery in wireless transmitter"
  },
  "XW": {
    "Type": "Forced Point",
    "Description": "A point was forced out of the system at arm time"
  },
  "XX": {
    "Type": "Fail to Test",
    "Description": "A specific test from a panel was not received"
  },
  "YA": {
    "Type": "Bell Fault",
    "Description": "A trouble condition has been detected on a Local Bell, Siren, or Annunciator"
  },
  "YB": {
    "Type": "Busy Seconds",
    "Description": "Percent of time receiver's line card is on-line"
  },
  "YC": {
    "Type": "Communications Fail",
    "Description": "RECEIVER and TRANSMITTER"
  },
  "YD": {
    "Type": "Receiver Line Card Trouble",
    "Description": "A line card identified by the passed address is in trouble"
  },
  "YE": {
    "Type": "Receiver Line Card Restored",
    "Description": "A line card identified by the passed address is restored"
  },
  "YF": {
    "Type": "Parameter Checksum Fail",
    "Description": "System data corrupted"
  },
  "YG": {
    "Type": "Parameter Changed",
    "Description": "A TRANSMITTER'S parameters have been changed"
  },
  "YH": {
    "Type": "Bell Restored",
    "Description": "A trouble condition has been restored on a Local Bell, Siren, or Annunciator"
  },
  "YI": {
    "Type": "Overcurrent Trouble",
    "Description": "An Expansion Device has detected an overcurrent condition"
  },
  "YJ": {
    "Type": "Overcurrent Restore",
    "Description": "An Expansion Device has restored from an overcurrent condition"
  },
  "YK": {
    "Type": "Communications Restoral",
    "Description": "TRANSMITTER has resumed communication with a RECEIVER"
  },
  "YM": {
    "Type": "System Battery Missing",
    "Description": "TRANSMITTER/RECEIVER battery is missing"
  },
  "YN": {
    "Type": "Invalid Report",
    "Description": "TRANSMITTER has sent a packet with invalid data"
  },
  "YO": {
    "Type": "Unknown Message",
    "Description": "An unknown message was received from automation or the printer"
  },
  "YP": {
    "Type": "Power Supply Trouble",
    "Description": "TRANSMITTER/RECEIVER has a problem with the power supply"
  },
  "YQ": {
    "Type": "Power Supply Restored",
    "Description": "TRANSMITTER'S/RECEIVER'S power supply has been restored"
  },
  "YR": {
    "Type": "System Battery Restoral",
    "Description": "Low battery has been corrected"
  },
  "YS": {
    "Type": "Communications Trouble",
    "Description": "RECEIVER and TRANSMITTER"
  },
  "YT": {
    "Type": "System Battery Trouble",
    "Description": "Low battery in control/communicator"
  },
  "YU": {
    "Type": "Diagnostic Error",
    "Description": "An expansion/peripheral device is reporting a diagnostic error"
  },
  "YW": {
    "Type": "Watchdog Reset",
    "Description": "The TRANSMITTER created an internal reset"
  },
  "YX": {
    "Type": "Service Required",
    "Description": "A TRANSMITTER/RECEIVER needs service"
  },
  "YY": {
    "Type": "Status Report",
    "Description": "This is a header for an account status report transmission"
  },
  "YZ": {
    "Type": "Service Completed",
    "Description": "Required TRANSMITTER / RECEIVER service completed"
  },
  "ZA": {
    "Type": "Freeze Alarm",
    "Description": "Low temperature detected at premises"
  },
  "ZB": {
    "Type": "Freeze Bypass",
    "Description": "Low temperature detection has been bypassed"
  },
  "ZH": {
    "Type": "Freeze Alarm Restore",
    "Description": "Alarm condition eliminated"
  },
  "ZJ": {
    "Type": "Freeze Trouble Restore",
    "Description": "Trouble condition eliminated"
  },
  "ZR": {
    "Type": "Freeze Restoral",
    "Description": "Alarm/trouble condition has been eliminated"
  },
  "ZS": {
    "Type": "Freeze Supervisory",
    "Description": "Unsafe freeze detection system condition"
  },
  "ZT": {
    "Type": "Freeze Trouble",
    "Description": "Zone disabled by fault"
  },
  "ZU": {
    "Type": "Freeze Unbypass",
    "Description": "Low temperature detection bypass removed"
  }
}