[ 0.000000] Linux version 6.5.11-7-pve (build@proxmox) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC PMX 6.5.11-7 (2023-12-05T09:44Z) () [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.11-7-pve root=/dev/mapper/pve-root ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007263ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000072640000-0x000000007573ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000075740000-0x0000000075814fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000075815000-0x00000000758d4fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000758d5000-0x0000000075f65fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000075f66000-0x0000000075ffefff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000075fff000-0x0000000075ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000076000000-0x0000000079ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007aa00000-0x000000007abfffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x00000000803fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fbfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.8 by American Megatrends [ 0.000000] efi: ACPI=0x75814000 ACPI 2.0=0x75814014 TPMFinalLog=0x75882000 SMBIOS=0x75d92000 SMBIOS 3.0=0x75d91000 MEMATTR=0x6f4c4018 ESRT=0x6f4c8a18 MOKvar=0x75d96000 [ 0.000000] efi: Remove mem72: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved [ 0.000000] efi: Not removing mem73: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem74: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem75: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem77: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem78: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.5.0 present. [ 0.000000] DMI: Default string Default string/Default string, BIOS 5.26 10/11/2023 [ 0.000000] tsc: Detected 800.000 MHz processor [ 0.000000] tsc: Detected 806.400 MHz TSC [ 0.000217] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000220] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000228] last_pfn = 0x47fc00 max_arch_pfn = 0x400000000 [ 0.000232] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs [ 0.000234] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000347] last_pfn = 0x76000 max_arch_pfn = 0x400000000 [ 0.011497] esrt: Reserving ESRT space from 0x000000006f4c8a18 to 0x000000006f4c8b68. [ 0.011502] e820: update [mem 0x6f4c8000-0x6f4c8fff] usable ==> reserved [ 0.011519] Using GB pages for direct mapping [ 0.011520] Incomplete global flushes, disabling PCID [ 0.011760] secureboot: Secure boot disabled [ 0.011760] RAMDISK: [mem 0x30c87000-0x3463afff] [ 0.011763] ACPI: Early table checksum verification disabled [ 0.011767] ACPI: RSDP 0x0000000075814014 000024 (v02 ALASKA) [ 0.011770] ACPI: XSDT 0x0000000075813728 000104 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011776] ACPI: FACP 0x0000000075812000 000114 (v06 ALASKA A M I 01072009 AMI 01000013) [ 0.011781] ACPI: DSDT 0x000000007579A000 077878 (v02 ALASKA A M I 01072009 INTL 20200717) [ 0.011784] ACPI: FACS 0x00000000758D4000 000040 [ 0.011786] ACPI: FIDT 0x0000000075799000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.011788] ACPI: MSDM 0x0000000075798000 000055 (v03 ALASKA A M I 01072009 AMI 01000013) [ 0.011791] ACPI: SSDT 0x0000000075797000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [ 0.011793] ACPI: SSDT 0x0000000075791000 005D0B (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [ 0.011796] ACPI: SSDT 0x000000007578E000 002A45 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [ 0.011798] ACPI: SSDT 0x000000007578A000 0033D3 (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [ 0.011800] ACPI: HPET 0x0000000075789000 000038 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011803] ACPI: APIC 0x0000000075788000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013) [ 0.011805] ACPI: MCFG 0x0000000075787000 00003C (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011807] ACPI: SSDT 0x0000000075785000 001FFD (v02 ALASKA Ther_Rvp 00001000 INTL 20200717) [ 0.011809] ACPI: UEFI 0x0000000075869000 000048 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011811] ACPI: PSDS 0x0000000075784000 000052 (v01 INTEL EDK2 00000005 INTL 0100000D) [ 0.011814] ACPI: NHLT 0x0000000075783000 00002D (v00 ALASKA A M I 01072009 AMI 01000013) [ 0.011816] ACPI: LPIT 0x0000000075782000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011819] ACPI: SSDT 0x000000007577E000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717) [ 0.011821] ACPI: SSDT 0x000000007577B000 002357 (v02 ALASKA TbtTypeC 00000000 INTL 20200717) [ 0.011823] ACPI: DBGP 0x000000007577A000 000034 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011825] ACPI: DBG2 0x0000000075779000 000054 (v00 ALASKA A M I 01072009 AMI 01000013) [ 0.011828] ACPI: DMAR 0x0000000075778000 000088 (v02 INTEL EDK2 00000002 01000013) [ 0.011830] ACPI: FPDT 0x0000000075777000 000044 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.011832] ACPI: SSDT 0x0000000075776000 00073A (v02 INTEL xh_adl_N 00000000 INTL 20200717) [ 0.011834] ACPI: SSDT 0x0000000075772000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717) [ 0.011836] ACPI: SSDT 0x000000007576E000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [ 0.011839] ACPI: SSDT 0x000000007576D000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717) [ 0.011841] ACPI: TPM2 0x000000007576C000 00004C (v04 ALASKA A M I 00000001 AMI 00000000) [ 0.011843] ACPI: PHAT 0x000000007576B000 000671 (v01 ALASKA A M I 00000005 MSFT 0100000D) [ 0.011845] ACPI: WSMT 0x0000000075781000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.011847] ACPI: Reserving FACP table memory at [mem 0x75812000-0x75812113] [ 0.011848] ACPI: Reserving DSDT table memory at [mem 0x7579a000-0x75811877] [ 0.011849] ACPI: Reserving FACS table memory at [mem 0x758d4000-0x758d403f] [ 0.011850] ACPI: Reserving FIDT table memory at [mem 0x75799000-0x7579909b] [ 0.011850] ACPI: Reserving MSDM table memory at [mem 0x75798000-0x75798054] [ 0.011851] ACPI: Reserving SSDT table memory at [mem 0x75797000-0x7579738b] [ 0.011852] ACPI: Reserving SSDT table memory at [mem 0x75791000-0x75796d0a] [ 0.011852] ACPI: Reserving SSDT table memory at [mem 0x7578e000-0x75790a44] [ 0.011853] ACPI: Reserving SSDT table memory at [mem 0x7578a000-0x7578d3d2] [ 0.011854] ACPI: Reserving HPET table memory at [mem 0x75789000-0x75789037] [ 0.011854] ACPI: Reserving APIC table memory at [mem 0x75788000-0x757881db] [ 0.011855] ACPI: Reserving MCFG table memory at [mem 0x75787000-0x7578703b] [ 0.011856] ACPI: Reserving SSDT table memory at [mem 0x75785000-0x75786ffc] [ 0.011856] ACPI: Reserving UEFI table memory at [mem 0x75869000-0x75869047] [ 0.011857] ACPI: Reserving PSDS table memory at [mem 0x75784000-0x75784051] [ 0.011857] ACPI: Reserving NHLT table memory at [mem 0x75783000-0x7578302c] [ 0.011858] ACPI: Reserving LPIT table memory at [mem 0x75782000-0x757820cb] [ 0.011859] ACPI: Reserving SSDT table memory at [mem 0x7577e000-0x75780a82] [ 0.011859] ACPI: Reserving SSDT table memory at [mem 0x7577b000-0x7577d356] [ 0.011860] ACPI: Reserving DBGP table memory at [mem 0x7577a000-0x7577a033] [ 0.011861] ACPI: Reserving DBG2 table memory at [mem 0x75779000-0x75779053] [ 0.011861] ACPI: Reserving DMAR table memory at [mem 0x75778000-0x75778087] [ 0.011862] ACPI: Reserving FPDT table memory at [mem 0x75777000-0x75777043] [ 0.011862] ACPI: Reserving SSDT table memory at [mem 0x75776000-0x75776739] [ 0.011863] ACPI: Reserving SSDT table memory at [mem 0x75772000-0x75775ae9] [ 0.011864] ACPI: Reserving SSDT table memory at [mem 0x7576e000-0x757719d9] [ 0.011864] ACPI: Reserving SSDT table memory at [mem 0x7576d000-0x7576d143] [ 0.011865] ACPI: Reserving TPM2 table memory at [mem 0x7576c000-0x7576c04b] [ 0.011866] ACPI: Reserving PHAT table memory at [mem 0x7576b000-0x7576b670] [ 0.011866] ACPI: Reserving WSMT table memory at [mem 0x75781000-0x75781027] [ 0.012004] No NUMA configuration found [ 0.012005] Faking a node at [mem 0x0000000000000000-0x000000047fbfffff] [ 0.012011] NODE_DATA(0) allocated [mem 0x47fbd5000-0x47fbfffff] [ 0.012193] Zone ranges: [ 0.012194] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.012196] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.012197] Normal [mem 0x0000000100000000-0x000000047fbfffff] [ 0.012198] Device empty [ 0.012199] Movable zone start for each node [ 0.012200] Early memory node ranges [ 0.012201] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.012202] node 0: [mem 0x000000000009f000-0x000000000009ffff] [ 0.012203] node 0: [mem 0x0000000000100000-0x000000007263ffff] [ 0.012204] node 0: [mem 0x0000000075fff000-0x0000000075ffffff] [ 0.012205] node 0: [mem 0x0000000100000000-0x000000047fbfffff] [ 0.012206] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fbfffff] [ 0.012211] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012213] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012254] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.016119] On node 0, zone DMA32: 14783 pages in unavailable ranges [ 0.046078] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.046090] On node 0, zone Normal: 1024 pages in unavailable ranges [ 0.046112] Reserving Intel graphics memory at [mem 0x7c800000-0x803fffff] [ 0.046352] ACPI: PM-Timer IO Port: 0x1808 [ 0.046361] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.046362] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.046363] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.046364] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.046364] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.046365] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.046366] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.046366] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.046367] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.046367] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.046368] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.046368] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.046369] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.046370] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.046370] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.046371] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.046372] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.046372] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.046373] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.046373] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.046374] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.046375] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.046375] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.046376] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.046412] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.046415] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.046417] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.046420] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.046422] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.046425] TSC deadline timer available [ 0.046426] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.046441] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.046443] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.046444] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.046446] PM: hibernation: Registered nosave memory: [mem 0x6f4c8000-0x6f4c8fff] [ 0.046447] PM: hibernation: Registered nosave memory: [mem 0x72640000-0x7573ffff] [ 0.046448] PM: hibernation: Registered nosave memory: [mem 0x75740000-0x75814fff] [ 0.046448] PM: hibernation: Registered nosave memory: [mem 0x75815000-0x758d4fff] [ 0.046449] PM: hibernation: Registered nosave memory: [mem 0x758d5000-0x75f65fff] [ 0.046449] PM: hibernation: Registered nosave memory: [mem 0x75f66000-0x75ffefff] [ 0.046450] PM: hibernation: Registered nosave memory: [mem 0x76000000-0x79ffffff] [ 0.046451] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7a9fffff] [ 0.046452] PM: hibernation: Registered nosave memory: [mem 0x7aa00000-0x7abfffff] [ 0.046452] PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7affffff] [ 0.046453] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x803fffff] [ 0.046453] PM: hibernation: Registered nosave memory: [mem 0x80400000-0xfdffffff] [ 0.046454] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.046454] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.046455] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.046455] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.046456] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.046457] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff] [ 0.046457] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.046458] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff] [ 0.046458] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.046459] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.046460] [mem 0x80400000-0xfdffffff] available for PCI devices [ 0.046462] Booting paravirtualized kernel on bare hardware [ 0.046464] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.046471] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.046817] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288 [ 0.046823] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152 [ 0.046826] pcpu-alloc: [0] 0 1 2 3 [ 0.046845] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.11-7-pve root=/dev/mapper/pve-root ro quiet [ 0.046886] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.5.11-7-pve", will be passed to user space. [ 0.046905] random: crng init done [ 0.049024] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.050111] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.050160] Fallback order for Node 0: 0 [ 0.050164] Built 1 zonelists, mobility grouping on. Total pages: 4072631 [ 0.050165] Policy zone: Normal [ 0.050172] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.050182] software IO TLB: area num 4. [ 0.105046] Memory: 15973044K/16549756K available (20480K kernel code, 3583K rwdata, 12756K rodata, 4624K init, 18244K bss, 576452K reserved, 0K cma-reserved) [ 0.105235] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.105264] ftrace: allocating 52819 entries in 207 pages [ 0.108710] ftrace: allocated 207 pages with 6 groups [ 0.109187] Dynamic Preempt: voluntary [ 0.109215] rcu: Preemptible hierarchical RCU implementation. [ 0.109216] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.109217] Trampoline variant of Tasks RCU enabled. [ 0.109218] Rude variant of Tasks RCU enabled. [ 0.109218] Tracing variant of Tasks RCU enabled. [ 0.109219] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.109220] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.111590] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.111884] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.112089] Console: colour dummy device 80x25 [ 0.112091] printk: console [tty0] enabled [ 0.112132] ACPI: Core revision 20230331 [ 0.112552] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.112553] APIC: Switch to symmetric I/O mode setup [ 0.112555] DMAR: Host address width 39 [ 0.112556] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.112562] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.112565] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.112569] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da [ 0.112571] DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff [ 0.112573] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.112574] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.112575] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.114301] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.114303] x2apic enabled [ 0.114322] Switched APIC routing to cluster x2apic. [ 0.118989] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns [ 0.118998] Calibrating delay loop (skipped), value calculated using timer frequency.. 1612.80 BogoMIPS (lpj=3225600) [ 0.119027] CPU0: Thermal monitoring enabled (TM1) [ 0.119028] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.119097] process: using mwait in idle threads [ 0.119100] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.119101] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.119104] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.119105] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.119106] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.119108] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.119109] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.119115] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.119116] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.119117] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.119118] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.119119] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.119120] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 0.119121] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. [ 0.122993] Freeing SMP alternatives memory: 44K [ 0.122993] pid_max: default: 32768 minimum: 301 [ 0.122993] LSM: initializing lsm=lockdown,capability,yama,apparmor,integrity [ 0.122993] Yama: becoming mindful. [ 0.122993] AppArmor: AppArmor initialized [ 0.122993] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.122993] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.122993] smpboot: CPU0: Intel(R) N100 (family: 0x6, model: 0xbe, stepping: 0x0) [ 0.122993] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.122993] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.122993] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.122993] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, PEBS-via-PT, AnyThread deprecated, Gracemont events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.122993] ... version: 5 [ 0.122993] ... bit width: 48 [ 0.122993] ... generic registers: 6 [ 0.122993] ... value mask: 0000ffffffffffff [ 0.122993] ... max period: 00007fffffffffff [ 0.122993] ... fixed-purpose events: 3 [ 0.122993] ... event mask: 000000070000003f [ 0.122993] signal: max sigframe size: 3632 [ 0.122993] Estimated ratio of average max frequency by base frequency (times 1024): 3712 [ 0.122993] rcu: Hierarchical SRCU implementation. [ 0.122993] rcu: Max phase no-delay instances is 1000. [ 0.122993] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.122993] smp: Bringing up secondary CPUs ... [ 0.122993] smpboot: x86: Booting SMP configuration: [ 0.122993] .... node #0, CPUs: #1 #2 #3 [ 0.122993] smp: Brought up 1 node, 4 CPUs [ 0.122993] smpboot: Max logical packages: 1 [ 0.122993] smpboot: Total of 4 processors activated (6451.20 BogoMIPS) [ 0.122993] devtmpfs: initialized [ 0.122993] x86/mm: Memory block size: 128MB [ 0.123049] ACPI: PM: Registering ACPI NVS region [mem 0x75815000-0x758d4fff] (786432 bytes) [ 0.123087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.123096] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.123162] pinctrl core: initialized pinctrl subsystem [ 0.123376] PM: RTC time: 18:42:12, date: 2024-01-03 [ 0.123839] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.124139] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.124386] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.124647] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.124663] audit: initializing netlink subsys (disabled) [ 0.124681] audit: type=2000 audit(1704307332.004:1): state=initialized audit_enabled=0 res=1 [ 0.124681] thermal_sys: Registered thermal governor 'fair_share' [ 0.124681] thermal_sys: Registered thermal governor 'bang_bang' [ 0.124681] thermal_sys: Registered thermal governor 'step_wise' [ 0.124681] thermal_sys: Registered thermal governor 'user_space' [ 0.124681] thermal_sys: Registered thermal governor 'power_allocator' [ 0.124681] EISA bus registered [ 0.124681] cpuidle: using governor ladder [ 0.124681] cpuidle: using governor menu [ 0.124681] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.124681] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.124681] PCI: not using MMCONFIG [ 0.124681] PCI: Using configuration type 1 for base access [ 0.124681] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.124681] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.124681] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.124681] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.124681] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.124681] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.124681] ACPI: Added _OSI(Module Device) [ 0.124681] ACPI: Added _OSI(Processor Device) [ 0.124681] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.124681] ACPI: Added _OSI(Processor Aggregator Device) [ 0.208924] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20230331/dswload2-162) [ 0.208936] fbcon: Taking over console [ 0.208944] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230331/psobject-220) [ 0.208949] ACPI: Skipping parse of AML opcode: Scope (0x0010) [ 0.208953] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20230331/dswload2-162) [ 0.208958] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230331/psobject-220) [ 0.208961] ACPI: Skipping parse of AML opcode: Scope (0x0010) [ 0.211211] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.221041] ACPI: Dynamic OEM Table Load: [ 0.221041] ACPI: SSDT 0xFFFF8B35C0FC5A00 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [ 0.223644] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.228443] ACPI: Dynamic OEM Table Load: [ 0.228450] ACPI: SSDT 0xFFFF8B35C1006000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [ 0.229517] ACPI: Dynamic OEM Table Load: [ 0.229521] ACPI: SSDT 0xFFFF8B35C0FC9E00 0001A3 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [ 0.230628] ACPI: Dynamic OEM Table Load: [ 0.230633] ACPI: SSDT 0xFFFF8B35C0DF8800 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717) [ 0.232133] ACPI: Dynamic OEM Table Load: [ 0.232142] ACPI: SSDT 0xFFFF8B35C0DEA000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [ 0.234068] ACPI: Dynamic OEM Table Load: [ 0.234074] ACPI: SSDT 0xFFFF8B35C1312000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717) [ 0.235709] ACPI: Dynamic OEM Table Load: [ 0.235716] ACPI: SSDT 0xFFFF8B35C1316000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [ 0.237401] ACPI: Dynamic OEM Table Load: [ 0.237407] ACPI: SSDT 0xFFFF8B35C0DF6000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [ 0.241319] ACPI: Interpreter enabled [ 0.241374] ACPI: PM: (supports S0 S3 S4 S5) [ 0.241375] ACPI: Using IOAPIC for interrupt routing [ 0.242742] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.244644] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource [ 0.244654] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.244655] PCI: Ignoring E820 reservations for host bridge windows [ 0.246212] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.260202] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 0.260213] No Local Variables are initialized for Method [_PLD] [ 0.260214] No Arguments are initialized for method [_PLD] [ 0.260216] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 0.260248] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 0.260255] No Local Variables are initialized for Method [_PLD] [ 0.260256] No Arguments are initialized for method [_PLD] [ 0.260257] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 0.268911] ACPI: \_SB_.PC00.CNVW.WRST: New power resource [ 0.283402] ACPI: \_TZ_.FN00: New power resource [ 0.283472] ACPI: \_TZ_.FN01: New power resource [ 0.283538] ACPI: \_TZ_.FN02: New power resource [ 0.283609] ACPI: \_TZ_.FN03: New power resource [ 0.283674] ACPI: \_TZ_.FN04: New power resource [ 0.284289] ACPI: \PIN_: New power resource [ 0.284620] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.284627] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.286447] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.287901] PCI host bridge to bus 0000:00 [ 0.287903] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.287905] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.287907] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.287909] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.287910] pci_bus 0000:00: root bus resource [mem 0x80400000-0xbfffffff window] [ 0.287912] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.287913] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.287947] pci 0000:00:00.0: [8086:461c] type 00 class 0x060000 [ 0.288088] pci 0000:00:02.0: [8086:46d1] type 00 class 0x030000 [ 0.288096] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit] [ 0.288102] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.288107] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.288121] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.288124] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.288150] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] [ 0.288152] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.288157] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] [ 0.288158] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.288383] pci 0000:00:14.0: [8086:54ed] type 00 class 0x0c0330 [ 0.288405] pci 0000:00:14.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit] [ 0.288490] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.290626] pci 0000:00:14.2: [8086:54ef] type 00 class 0x050000 [ 0.290647] pci 0000:00:14.2: reg 0x10: [mem 0x6001114000-0x6001117fff 64bit] [ 0.290660] pci 0000:00:14.2: reg 0x18: [mem 0x600111b000-0x600111bfff 64bit] [ 0.290789] pci 0000:00:16.0: [8086:54e0] type 00 class 0x078000 [ 0.290813] pci 0000:00:16.0: reg 0x10: [mem 0x600111a000-0x600111afff 64bit] [ 0.290900] pci 0000:00:16.0: PME# supported from D3hot [ 0.291496] pci 0000:00:17.0: [8086:54d3] type 00 class 0x010601 [ 0.291514] pci 0000:00:17.0: reg 0x10: [mem 0x80600000-0x80601fff] [ 0.291523] pci 0000:00:17.0: reg 0x14: [mem 0x80603000-0x806030ff] [ 0.291532] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097] [ 0.291541] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083] [ 0.291550] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] [ 0.291560] pci 0000:00:17.0: reg 0x24: [mem 0x80602000-0x806027ff] [ 0.291608] pci 0000:00:17.0: PME# supported from D3hot [ 0.292021] pci 0000:00:1a.0: [8086:54c4] type 00 class 0x080501 [ 0.292048] pci 0000:00:1a.0: reg 0x10: [mem 0x6001119000-0x6001119fff 64bit] [ 0.292425] pci 0000:00:1c.0: [8086:54be] type 01 class 0x060400 [ 0.292526] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.292561] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.293278] pci 0000:00:1d.0: [8086:54b0] type 01 class 0x060400 [ 0.293377] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.293412] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.294136] pci 0000:00:1f.0: [8086:5481] type 00 class 0x060100 [ 0.294622] pci 0000:00:1f.3: [8086:54c8] type 00 class 0x040300 [ 0.294663] pci 0000:00:1f.3: reg 0x10: [mem 0x6001110000-0x6001113fff 64bit] [ 0.294717] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit] [ 0.294822] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.294918] pci 0000:00:1f.4: [8086:54a3] type 00 class 0x0c0500 [ 0.294940] pci 0000:00:1f.4: reg 0x10: [mem 0x6001118000-0x60011180ff 64bit] [ 0.294961] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.295227] pci 0000:00:1f.5: [8086:54a4] type 00 class 0x0c8000 [ 0.295246] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.295427] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.295450] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.295481] pci 0000:01:00.0: reg 0x18: [mem 0x80504000-0x80504fff 64bit] [ 0.295500] pci 0000:01:00.0: reg 0x20: [mem 0x80500000-0x80503fff 64bit] [ 0.295620] pci 0000:01:00.0: supports D1 D2 [ 0.295621] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.295827] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.295831] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.295834] pci 0000:00:1c.0: bridge window [mem 0x80500000-0x805fffff] [ 0.295909] pci 0000:02:00.0: [10ec:c821] type 00 class 0x028000 [ 0.295931] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.295959] pci 0000:02:00.0: reg 0x18: [mem 0x80400000-0x8040ffff 64bit] [ 0.296106] pci 0000:02:00.0: supports D1 D2 [ 0.296107] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.296372] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.296375] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.296378] pci 0000:00:1d.0: bridge window [mem 0x80400000-0x804fffff] [ 0.299466] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.299578] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.299688] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.299797] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.299905] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.300014] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.300123] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.300234] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.311012] iommu: Default domain type: Translated [ 0.311012] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.311144] SCSI subsystem initialized [ 0.311149] libata version 3.00 loaded. [ 0.311149] ACPI: bus type USB registered [ 0.311149] usbcore: registered new interface driver usbfs [ 0.311149] usbcore: registered new interface driver hub [ 0.311149] usbcore: registered new device driver usb [ 0.311149] pps_core: LinuxPPS API ver. 1 registered [ 0.311149] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.311149] PTP clock support registered [ 0.311149] EDAC MC: Ver: 3.0.0 [ 0.311149] efivars: Registered efivars operations [ 0.311237] NetLabel: Initializing [ 0.311239] NetLabel: domain hash size = 128 [ 0.311239] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.311257] NetLabel: unlabeled traffic allowed by default [ 0.311271] mctp: management component transport protocol core [ 0.311271] NET: Registered PF_MCTP protocol family [ 0.311271] PCI: Using ACPI for IRQ routing [ 0.333687] PCI: pci_cache_line_size set to 64 bytes [ 0.333736] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.333776] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.333779] e820: reserve RAM buffer [mem 0x6f4c8000-0x6fffffff] [ 0.333780] e820: reserve RAM buffer [mem 0x72640000-0x73ffffff] [ 0.333781] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff] [ 0.333782] e820: reserve RAM buffer [mem 0x47fc00000-0x47fffffff] [ 0.334998] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.335000] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.335001] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.335004] vgaarb: loaded [ 0.335063] clocksource: Switched to clocksource tsc-early [ 0.343667] VFS: Disk quotas dquot_6.6.0 [ 0.343683] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.343804] AppArmor: AppArmor Filesystem Enabled [ 0.343855] pnp: PnP ACPI init [ 0.344138] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.344141] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.344274] system 00:01: [io 0x1854-0x1857] has been reserved [ 0.346880] pnp 00:02: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.346902] system 00:02: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.346904] system 00:02: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.346905] system 00:02: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.346907] system 00:02: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.346908] system 00:02: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.346910] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.346911] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.347864] system 00:03: [io 0x2000-0x20fe] has been reserved [ 0.348806] pnp: PnP ACPI: found 5 devices [ 0.354339] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.354393] NET: Registered PF_INET protocol family [ 0.354661] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.357552] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.357593] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.357732] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.358142] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.358254] TCP: Hash tables configured (established 131072 bind 65536) [ 0.358356] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.358412] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.358459] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.358508] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.358520] NET: Registered PF_XDP protocol family [ 0.358527] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.358539] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] [ 0.358545] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit] [ 0.358548] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80604000-0x80604fff] [ 0.358562] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.358565] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.358569] pci 0000:00:1c.0: bridge window [mem 0x80500000-0x805fffff] [ 0.358576] pci 0000:00:1d.0: PCI bridge to [bus 02] [ 0.358578] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] [ 0.358582] pci 0000:00:1d.0: bridge window [mem 0x80400000-0x804fffff] [ 0.358589] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.358590] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.358592] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.358593] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window] [ 0.358594] pci_bus 0000:00: resource 8 [mem 0x80400000-0xbfffffff window] [ 0.358595] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window] [ 0.358597] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.358598] pci_bus 0000:01: resource 1 [mem 0x80500000-0x805fffff] [ 0.358599] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.358600] pci_bus 0000:02: resource 1 [mem 0x80400000-0x804fffff] [ 0.359172] PCI: CLS 64 bytes, default 64 [ 0.359191] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.359192] software IO TLB: mapped [mem 0x0000000067a9b000-0x000000006ba9b000] (64MB) [ 0.359220] Trying to unpack rootfs image as initramfs... [ 0.359393] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xb9fb05486c, max_idle_ns: 440795231721 ns [ 0.359450] clocksource: Switched to clocksource tsc [ 0.359508] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.360106] Initialise system trusted keyrings [ 0.360115] Key type blacklist registered [ 0.360170] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.360182] zbud: loaded [ 0.360354] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.360424] fuse: init (API version 7.38) [ 0.360527] integrity: Platform Keyring initialized [ 0.360533] integrity: Machine keyring initialized [ 0.367959] Key type asymmetric registered [ 0.367964] Asymmetric key parser 'x509' registered [ 0.368001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.368070] io scheduler mq-deadline registered [ 0.368578] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.368647] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 0.368914] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123 [ 0.368974] pcieport 0000:00:1d.0: AER: enabled with IRQ 123 [ 0.369059] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.369522] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.369545] ACPI: button: Sleep Button [SLPB] [ 0.369572] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.369586] ACPI: button: Power Button [PWRB] [ 0.369612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.369658] ACPI: button: Power Button [PWRF] [ 0.370984] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.ITE8.GETT], AE_NOT_FOUND (20230331/psargs-330) [ 0.370997] No Local Variables are initialized for Method [_TMP] [ 0.370999] No Arguments are initialized for method [_TMP] [ 0.371001] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 0.371105] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.LPCB.ITE8.GETT], AE_NOT_FOUND (20230331/psargs-330) [ 0.371112] No Local Variables are initialized for Method [_TMP] [ 0.371113] No Arguments are initialized for method [_TMP] [ 0.371114] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 0.371320] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.373035] hpet_acpi_add: no address or irqs in _CRS [ 0.373062] Linux agpgart interface v0.103 [ 0.381297] loop: module loaded [ 0.381630] tun: Universal TUN/TAP device driver, 1.6 [ 0.381663] PPP generic driver version 2.4.2 [ 0.381735] i8042: PNP: No PS/2 controller found. [ 0.381774] mousedev: PS/2 mouse device common for all mice [ 0.381886] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.382820] rtc_cmos rtc_cmos: registered as rtc0 [ 0.383021] rtc_cmos rtc_cmos: setting system clock to 2024-01-03T18:42:12 UTC (1704307332) [ 0.383059] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 0.383078] i2c_dev: i2c /dev entries driver [ 0.383354] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.383368] device-mapper: uevent: version 1.0.3 [ 0.383408] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.383426] platform eisa.0: Probing EISA bus 0 [ 0.383428] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.383429] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.383430] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.383431] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.383432] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.383433] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.383434] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.383435] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.383436] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.383436] platform eisa.0: EISA: Detected 0 cards [ 0.383439] intel_pstate: Intel P-state driver initializing [ 0.383677] intel_pstate: HWP enabled [ 0.383719] ledtrig-cpu: registered to indicate activity on CPUs [ 0.383899] intel_pmc_core INT33A1:00: initialized [ 0.383994] drop_monitor: Initializing network drop monitor service [ 0.396369] NET: Registered PF_INET6 protocol family [ 0.686489] Freeing initrd memory: 59088K [ 0.692633] Segment Routing with IPv6 [ 0.692653] In-situ OAM (IOAM) with IPv6 [ 0.692685] NET: Registered PF_PACKET protocol family [ 0.692697] Bridge firewalling registered [ 0.692757] Key type dns_resolver registered [ 0.693180] microcode: Microcode Update Driver: v2.2. [ 0.693252] resctrl: L2 allocation detected [ 0.693257] IPI shorthand broadcast: enabled [ 0.694396] sched_clock: Marking stable (686305467, 6936015)->(711469134, -18227652) [ 0.694516] registered taskstats version 1 [ 0.694628] Loading compiled-in X.509 certificates [ 0.695204] Loaded X.509 cert 'Build time autogenerated kernel key: 5f62c01e151a6e5c897562915c74e8abeac20e1f' [ 0.696704] Key type .fscrypt registered [ 0.696705] Key type fscrypt-provisioning registered [ 0.696839] Key type trusted registered [ 0.699705] Key type encrypted registered [ 0.699709] AppArmor: AppArmor sha1 policy hashing enabled [ 0.700473] Loading compiled-in module X.509 certificates [ 0.701022] Loaded X.509 cert 'Build time autogenerated kernel key: 5f62c01e151a6e5c897562915c74e8abeac20e1f' [ 0.701024] ima: Allocated hash algorithm: sha1 [ 0.735513] ima: No architecture policies found [ 0.735522] evm: Initialising EVM extended attributes: [ 0.735522] evm: security.selinux [ 0.735524] evm: security.SMACK64 [ 0.735524] evm: security.SMACK64EXEC [ 0.735525] evm: security.SMACK64TRANSMUTE [ 0.735525] evm: security.SMACK64MMAP [ 0.735526] evm: security.apparmor [ 0.735526] evm: security.ima [ 0.735526] evm: security.capability [ 0.735527] evm: HMAC attrs: 0x1 [ 0.735783] PM: Magic number: 8:786:745 [ 0.739069] RAS: Correctable Errors collector initialized. [ 0.739120] clk: Disabling unused clocks [ 0.740053] Freeing unused decrypted memory: 2036K [ 0.740639] Freeing unused kernel image (initmem) memory: 4624K [ 0.759137] Write protecting the kernel read-only data: 34816k [ 0.759726] Freeing unused kernel image (rodata/data gap) memory: 1580K [ 0.770142] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.770148] Run /init as init process [ 0.770149] with arguments: [ 0.770151] /init [ 0.770152] with environment: [ 0.770153] HOME=/ [ 0.770153] TERM=linux [ 0.770154] BOOT_IMAGE=/boot/vmlinuz-6.5.11-7-pve [ 0.901293] ahci 0000:00:17.0: version 3.0 [ 0.901635] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.901641] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 0.903166] sdhci: Secure Digital Host Controller Interface driver [ 0.903169] sdhci: Copyright(c) Pierre Ossman [ 0.903565] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 0.903751] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.903799] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.904048] scsi host0: ahci [ 0.904548] scsi host1: ahci [ 0.904605] ata1: SATA max UDMA/133 abar m2048@0x80602000 port 0x80602100 irq 124 [ 0.904609] ata2: SATA max UDMA/133 abar m2048@0x80602000 port 0x80602180 irq 124 [ 0.914878] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 0.915456] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 0.933083] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 68:1d:ef:38:44:e6, XID 541, IRQ 125 [ 0.933090] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.215639] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.215661] ata1: SATA link down (SStatus 4 SControl 300) [ 1.220032] ata2.00: ATA-11: CYX-SSD-S1000, SN09787, max UDMA/133 [ 1.220145] ata2.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.223182] ata2.00: configured for UDMA/133 [ 1.223399] scsi 1:0:0:0: Direct-Access ATA CYX-SSD-S1000 787 PQ: 0 ANSI: 5 [ 1.223865] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.223923] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.223940] sd 1:0:0:0: [sda] Write Protect is off [ 1.223943] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.224000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.224077] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.225297] sda: sda1 sda2 sda3 [ 1.225397] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.227903] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.227912] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.228516] sdhci-pci 0000:00:1a.0: SDHCI controller found [8086:54c4] (rev 0) [ 1.228982] mmc0: CQHCI version 5.10 [ 1.229105] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810 [ 1.229216] mmc0: SDHCI controller on PCI [0000:00:1a.0] using ADMA 64-bit [ 1.229410] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.229414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.229417] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.229461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.229463] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.229465] usb usb1: Product: xHCI Host Controller [ 1.229466] usb usb1: Manufacturer: Linux 6.5.11-7-pve xhci-hcd [ 1.229467] usb usb1: SerialNumber: 0000:00:14.0 [ 1.229589] hub 1-0:1.0: USB hub found [ 1.229614] hub 1-0:1.0: 12 ports detected [ 1.229640] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 1.229655] No Local Variables are initialized for Method [_PLD] [ 1.229657] No Arguments are initialized for method [_PLD] [ 1.229659] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 1.229682] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 1.229689] No Local Variables are initialized for Method [_PLD] [ 1.229690] No Arguments are initialized for method [_PLD] [ 1.229692] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 1.229718] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 1.229724] No Local Variables are initialized for Method [_PLD] [ 1.229726] No Arguments are initialized for method [_PLD] [ 1.229727] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 1.229742] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 1.229748] No Local Variables are initialized for Method [_PLD] [ 1.229750] No Arguments are initialized for method [_PLD] [ 1.229751] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 1.231092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.231095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.231097] usb usb2: Product: xHCI Host Controller [ 1.231098] usb usb2: Manufacturer: Linux 6.5.11-7-pve xhci-hcd [ 1.231099] usb usb2: SerialNumber: 0000:00:14.0 [ 1.231232] hub 2-0:1.0: USB hub found [ 1.231248] hub 2-0:1.0: 4 ports detected [ 1.255119] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.410507] mmc0: Failed to initialize a non-removable card [ 1.491020] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 1.890937] raid6: avx2x4 gen() 24183 MB/s [ 1.958938] raid6: avx2x2 gen() 26079 MB/s [ 2.026937] raid6: avx2x1 gen() 21472 MB/s [ 2.026938] raid6: using algorithm avx2x2 gen() 26079 MB/s [ 2.094937] raid6: .... xor() 14864 MB/s, rmw enabled [ 2.094938] raid6: using avx2x2 recovery algorithm [ 2.095961] xor: automatically using best checksumming function avx [ 2.173652] Btrfs loaded, zoned=yes, fsverity=yes [ 2.231739] EXT4-fs (dm-1): mounted filesystem 2d7a84bb-8f67-46d2-91a2-5964fde80b24 ro with ordered data mode. Quota mode: none. [ 2.352989] systemd[1]: Inserted module 'autofs4' [ 2.383567] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 2.383573] systemd[1]: Detected architecture x86-64. [ 2.386637] systemd[1]: Hostname set to . [ 2.560048] systemd[1]: Queued start job for default target graphical.target. [ 2.576923] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 2.577330] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 2.577648] systemd[1]: Created slice system-postfix.slice - Slice /system/postfix. [ 2.577963] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 2.578220] systemd[1]: Created slice user.slice - User and Session Slice. [ 2.578281] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 2.578324] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 2.578473] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 2.578510] systemd[1]: Reached target ceph-fuse.target - ceph target allowing to start/stop all ceph-fuse@.service instances at once. [ 2.578524] systemd[1]: Reached target ceph.target - ceph target allowing to start/stop all ceph*@.service instances at once. [ 2.578538] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 2.578560] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 2.578588] systemd[1]: Reached target paths.target - Path Units. [ 2.578617] systemd[1]: Reached target slices.target - Slice Units. [ 2.578639] systemd[1]: Reached target time-set.target - System Time Set. [ 2.578667] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 2.578739] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 2.578841] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 2.581643] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. [ 2.581778] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 2.581842] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 2.582042] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 2.582152] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 2.582261] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 2.582600] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 2.582684] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 2.583420] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 2.584124] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 2.584902] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 2.585698] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 2.585762] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 2.586957] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 2.587746] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 2.588526] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 2.589410] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 2.590207] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 2.591139] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 2.592104] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 2.592954] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 2.593800] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 2.593998] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 2.595488] systemd[1]: Starting systemd-journald.service - Journal Service... [ 2.595871] pstore: Using crash dump compression: deflate [ 2.597495] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 2.598379] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 2.599271] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 2.600564] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 2.600657] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 2.600728] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 2.600793] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 2.601018] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 2.601334] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 2.601533] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 2.601633] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 2.601836] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 2.601932] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 2.602130] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 2.602229] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 2.602424] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 2.602523] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 2.602798] pstore: Registered efi_pstore as persistent store backend [ 2.603496] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 2.604315] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 2.604397] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 2.604772] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 2.604916] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 2.605528] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 2.609316] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 2.609479] EXT4-fs (dm-1): re-mounted 2d7a84bb-8f67-46d2-91a2-5964fde80b24 r/w. Quota mode: none. [ 2.610415] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 2.610516] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.610550] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.611516] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 2.612409] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 2.627754] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ 2.627873] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.629181] ACPI: bus type drm_connector registered [ 2.632755] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 2.632894] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 2.642765] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.645255] spl: loading out-of-tree module taints kernel. [ 2.667850] systemd-journald[321]: Received client request to flush runtime journal. [ 2.697550] zfs: module license 'CDDL' taints kernel. [ 2.697557] Disabling lock debugging due to kernel taint [ 2.697582] zfs: module license taints kernel. [ 3.466891] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 3.468623] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.524647] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 3.525597] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.525926] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 3.526102] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 3.526271] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.529254] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.529271] cfg80211: failed to load regulatory.db [ 3.529615] spi-nor spi0.0: spi-nor-generic (16384 Kbytes) [ 3.549736] Creating 1 MTD partitions on "0000:00:1f.5": [ 3.549750] 0x000000000000-0x000001000000 : "BIOS" [ 3.598054] Adding 8388604k swap on /dev/mapper/pve-swap. Priority:-2 extents:1 across:8388604k SSFS [ 3.866707] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 3.866719] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.866720] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.873360] cryptd: max_cpu_qlen set to 1000 [ 3.953650] rtw_8821ce 0000:02:00.0: enabling device (0000 -> 0003) [ 3.957656] AVX2 version of gcm_enc/dec engaged. [ 3.959517] AES CTR mode by8 optimization enabled [ 3.971671] rtw_8821ce 0000:02:00.0: Firmware version 24.11.0, H2C version 12 [ 4.035217] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.162136] rtw_8821ce 0000:02:00.0 wlp2s0: renamed from wlan0 [ 4.809514] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.809601] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 4.810076] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.817300] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20) [ 4.828931] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.13.1 [ 4.828941] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [ 4.837821] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [ 4.838576] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [ 4.838581] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [ 4.838899] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [ 4.840372] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 4.936497] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 4.937890] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.938788] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 4.939547] intel_tcc_cooling: TCC Offset locked [ 4.939872] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.986335] ZFS: Loaded module v2.2.2-pve1, ZFS pool version 5000, ZFS filesystem version 5 [ 5.022577] intel_rapl_msr: PL4 support detected. [ 5.022619] intel_rapl_common: Found RAPL domain package [ 5.022622] intel_rapl_common: Found RAPL domain core [ 5.022623] intel_rapl_common: Found RAPL domain uncore [ 5.794633] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 5.830728] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 [ 5.830777] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 [ 5.830814] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 5.830849] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 6.649524] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 6.747052] usb 1-1: unable to read config index 0 descriptor/all [ 6.747063] usb 1-1: can't read configurations, error -110 [ 6.882943] usb 1-1: new full-speed USB device number 3 using xhci_hcd [ 7.502956] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 12.119274] usb 1-1: unable to read config index 0 descriptor/all [ 12.119283] usb 1-1: can't read configurations, error -110 [ 12.119436] usb usb1-port1: attempt power cycle [ 12.531130] usb 1-1: new full-speed USB device number 4 using xhci_hcd [ 17.751230] usb 1-1: unable to read config index 0 descriptor/all [ 17.751239] usb 1-1: can't read configurations, error -110 [ 17.879133] usb 1-1: new full-speed USB device number 5 using xhci_hcd [ 23.127230] usb 1-1: unable to read config index 0 descriptor/all [ 23.127239] usb 1-1: can't read configurations, error -110 [ 23.127351] usb usb1-port1: unable to enumerate USB device [ 23.255132] usb 1-2: new full-speed USB device number 6 using xhci_hcd [ 23.415144] usb 1-2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=82.41 [ 23.415149] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 23.415201] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 23.415215] No Local Variables are initialized for Method [_PLD] [ 23.415216] No Arguments are initialized for method [_PLD] [ 23.415218] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 23.416755] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 23.416764] No Local Variables are initialized for Method [_PLD] [ 23.416766] No Arguments are initialized for method [_PLD] [ 23.416768] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 23.416817] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 23.416824] No Local Variables are initialized for Method [_PLD] [ 23.416825] No Arguments are initialized for method [_PLD] [ 23.416826] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 23.543143] usb 1-3: new full-speed USB device number 7 using xhci_hcd [ 23.692440] usb 1-3: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00 [ 23.692447] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 23.819129] usb 1-4: new high-speed USB device number 8 using xhci_hcd [ 23.968729] usb 1-4: New USB device found, idVendor=12d1, idProduct=1442, bcdDevice= 1.02 [ 23.968735] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 23.968736] usb 1-4: Product: HUAWEI_MOBILE [ 23.968737] usb 1-4: Manufacturer: HUAWEI_MOBILE [ 24.099134] usb 1-5: new full-speed USB device number 9 using xhci_hcd [ 24.248446] usb 1-5: New USB device found, idVendor=0bda, idProduct=c821, bcdDevice= 1.10 [ 24.248452] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 24.248453] usb 1-5: Product: Bluetooth Radio [ 24.248454] usb 1-5: Manufacturer: Realtek [ 24.248455] usb 1-5: SerialNumber: 00e04c000001 [ 24.375131] usb 1-6: new full-speed USB device number 10 using xhci_hcd [ 24.524934] usb 1-6: New USB device found, idVendor=0573, idProduct=1573, bcdDevice=80.07 [ 24.524939] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 24.524941] usb 1-6: Product: USB Audio and HID [ 24.524942] usb 1-6: Manufacturer: CSCTEK [ 24.524943] usb 1-6: SerialNumber: A34004801402 [ 24.535815] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [ 24.535959] usbcore: registered new interface driver cdc_acm [ 24.535961] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 24.536595] usb-storage 1-4:1.1: USB Mass Storage device detected [ 24.538292] scsi host2: usb-storage 1-4:1.1 [ 24.538415] usbcore: registered new interface driver usb-storage [ 24.539678] usbcore: registered new interface driver usbserial_generic [ 24.539690] usbserial: USB Serial support registered for generic [ 24.541398] mc: Linux media interface: v0.10 [ 24.541634] usbcore: registered new interface driver uas [ 24.548197] hid: raw HID events driver (C) Jiri Kosina [ 24.549537] usbcore: registered new interface driver option [ 24.549553] usbserial: USB Serial support registered for GSM modem (1-port) [ 24.549593] option 1-4:1.0: GSM modem (1-port) converter detected [ 24.549700] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 24.551356] usbhid 1-6:1.3: couldn't find an input interrupt endpoint [ 24.551375] usbcore: registered new interface driver usbhid [ 24.551376] usbhid: USB HID core driver [ 24.585034] Bluetooth: Core ver 2.22 [ 24.585057] NET: Registered PF_BLUETOOTH protocol family [ 24.585059] Bluetooth: HCI device and connection manager initialized [ 24.585064] Bluetooth: HCI socket layer initialized [ 24.585066] Bluetooth: L2CAP socket layer initialized [ 24.585070] Bluetooth: SCO socket layer initialized [ 24.599083] usbcore: registered new interface driver btusb [ 24.599394] Bluetooth: hci0: unexpected event for opcode 0x0000 [ 24.600313] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=2031 [ 24.600317] Bluetooth: hci0: LMP ver=6 subver=2031; manufacturer=10 [ 24.601277] Bluetooth: hci1: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 [ 24.602300] Bluetooth: hci1: RTL: rom_version status=0 version=1 [ 24.602304] Bluetooth: hci1: RTL: loading rtl_bt/rtl8821c_fw.bin [ 24.602910] usb 1-6: Warning! Unlikely big volume range (=511), cval->res is probably wrong. [ 24.602913] usb 1-6: [5] FU [Mic Capture Volume] ch = 1, val = -8192/-1/16 [ 24.604079] Bluetooth: hci1: RTL: loading rtl_bt/rtl8821c_config.bin [ 24.604303] Bluetooth: hci1: RTL: cfg_sz 10, total sz 34926 [ 24.604996] usb 1-6: Warning! Unlikely big volume range (=896), cval->res is probably wrong. [ 24.604998] usb 1-6: [6] FU [PCM Playback Volume] ch = 2, val = -16384/-2048/16 [ 24.605136] usbcore: registered new interface driver snd-usb-audio [ 24.710619] audit: type=1400 audit(1704307356.819:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=572 comm="apparmor_parser" [ 24.710627] audit: type=1400 audit(1704307356.819:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=572 comm="apparmor_parser" [ 24.711437] audit: type=1400 audit(1704307356.823:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=570 comm="apparmor_parser" [ 24.713681] audit: type=1400 audit(1704307356.823:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=581 comm="apparmor_parser" [ 24.718175] audit: type=1400 audit(1704307356.827:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=571 comm="apparmor_parser" [ 24.718182] audit: type=1400 audit(1704307356.827:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=571 comm="apparmor_parser" [ 24.718185] audit: type=1400 audit(1704307356.827:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=571 comm="apparmor_parser" [ 24.718187] audit: type=1400 audit(1704307356.827:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=571 comm="apparmor_parser" [ 24.718601] audit: type=1400 audit(1704307356.827:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=582 comm="apparmor_parser" [ 24.718606] audit: type=1400 audit(1704307356.827:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=582 comm="apparmor_parser" [ 24.750528] RPC: Registered named UNIX socket transport module. [ 24.750533] RPC: Registered udp transport module. [ 24.750533] RPC: Registered tcp transport module. [ 24.750534] RPC: Registered tcp-with-tls transport module. [ 24.750535] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 24.760303] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 24.760307] softdog: soft_reboot_cmd= soft_active_on_boot=0 [ 25.071341] Bluetooth: hci1: RTL: fw version 0x75b8f098 [ 25.458545] vmbr0: port 1(enp1s0) entered blocking state [ 25.458551] vmbr0: port 1(enp1s0) entered disabled state [ 25.458569] r8169 0000:01:00.0 enp1s0: entered allmulticast mode [ 25.458619] r8169 0000:01:00.0 enp1s0: entered promiscuous mode [ 25.491173] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [ 25.559953] scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage 2.3M PQ: 0 ANSI: 2 [ 25.560586] sr 2:0:0:0: Power-on or device reset occurred [ 25.561301] sr 2:0:0:0: [sr0] scsi-1 drive [ 25.561304] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 25.562916] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 25.562980] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 25.580094] sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 25.580101] sr 2:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current] [ 25.580103] sr 2:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error [ 25.580105] sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 0d fc 00 00 02 00 [ 25.580107] critical medium error, dev sr0, sector 14320 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 25.584964] sr 2:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [ 25.584967] sr 2:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current] [ 25.584968] sr 2:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error [ 25.584970] sr 2:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 0d fa 00 00 02 00 [ 25.584971] critical medium error, dev sr0, sector 14312 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 25.687298] r8169 0000:01:00.0 enp1s0: Link is Down [ 25.690147] vmbr0: port 1(enp1s0) entered blocking state [ 25.690153] vmbr0: port 1(enp1s0) entered forwarding state [ 26.487017] vmbr0: port 1(enp1s0) entered disabled state [ 28.067927] bpfilter: Loaded bpfilter_umh pid 921 [ 28.068128] Started bpfilter [ 28.866545] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx [ 28.866569] vmbr0: port 1(enp1s0) entered blocking state [ 28.866573] vmbr0: port 1(enp1s0) entered forwarding state [ 31.507955] kvm[968]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 32.314870] tap101i0: entered promiscuous mode [ 32.356140] vmbr0: port 2(fwpr101p0) entered blocking state [ 32.356146] vmbr0: port 2(fwpr101p0) entered disabled state [ 32.356165] fwpr101p0: entered allmulticast mode [ 32.356202] fwpr101p0: entered promiscuous mode [ 32.356229] vmbr0: port 2(fwpr101p0) entered blocking state [ 32.356231] vmbr0: port 2(fwpr101p0) entered forwarding state [ 32.363492] fwbr101i0: port 1(fwln101i0) entered blocking state [ 32.363497] fwbr101i0: port 1(fwln101i0) entered disabled state [ 32.363515] fwln101i0: entered allmulticast mode [ 32.363551] fwln101i0: entered promiscuous mode [ 32.363582] fwbr101i0: port 1(fwln101i0) entered blocking state [ 32.363584] fwbr101i0: port 1(fwln101i0) entered forwarding state [ 32.370899] fwbr101i0: port 2(tap101i0) entered blocking state [ 32.370921] fwbr101i0: port 2(tap101i0) entered disabled state [ 32.370943] tap101i0: entered allmulticast mode [ 32.371014] fwbr101i0: port 2(tap101i0) entered blocking state [ 32.371018] fwbr101i0: port 2(tap101i0) entered forwarding state [ 32.445135] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 32.445151] option 1-4:1.0: device disconnected [ 32.786277] x86/split lock detection: #AC: CPU 1/KVM/1024 took a split_lock trap at address: 0xbfebd050 [ 39.323077] FS-Cache: Loaded [ 39.523696] NFS: Registering the id_resolver key type [ 39.523709] Key type id_resolver registered [ 39.523709] Key type id_legacy registered [ 44.735446] usb 1-4: reset high-speed USB device number 8 using xhci_hcd [ 45.291445] usb 1-3: reset full-speed USB device number 7 using xhci_hcd [ 45.843395] usb 1-2: reset full-speed USB device number 6 using xhci_hcd [ 518.152675] usb 1-1: new full-speed USB device number 11 using xhci_hcd [ 518.301997] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 518.302003] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 518.302004] usb 1-1: Product: ConBee II [ 518.302005] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 518.302006] usb 1-1: SerialNumber: DE2227330 [ 518.302063] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 518.302075] No Local Variables are initialized for Method [_PLD] [ 518.302077] No Arguments are initialized for method [_PLD] [ 518.302078] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 518.303732] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 518.303746] No Local Variables are initialized for Method [_PLD] [ 518.303747] No Arguments are initialized for method [_PLD] [ 518.303749] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 518.303949] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 518.303981] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 518.303989] No Local Variables are initialized for Method [_PLD] [ 518.303991] No Arguments are initialized for method [_PLD] [ 518.303992] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 521.669683] usb 1-1: USB disconnect, device number 11 [ 522.024480] usb 1-1: new full-speed USB device number 12 using xhci_hcd [ 523.012907] usb 1-3: reset full-speed USB device number 7 using xhci_hcd [ 523.161975] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [ 523.288889] usb 1-2: reset full-speed USB device number 6 using xhci_hcd [ 523.448198] Bluetooth: hci0: urb 000000000716113c failed to resubmit (2) [ 525.476627] Bluetooth: hci0: command 0x1001 tx timeout [ 527.204736] usb 1-1: unable to read config index 0 descriptor/all [ 527.204745] usb 1-1: can't read configurations, error -110 [ 527.332620] usb 1-1: new full-speed USB device number 13 using xhci_hcd [ 532.580686] usb 1-1: unable to read config index 0 descriptor/all [ 532.580695] usb 1-1: can't read configurations, error -110 [ 532.580760] usb usb1-port1: attempt power cycle [ 532.992582] usb 1-1: new full-speed USB device number 14 using xhci_hcd [ 533.604568] Bluetooth: hci0: CSR: Local version failed (-110) [ 534.032729] usb 1-3: reset full-speed USB device number 7 using xhci_hcd [ 534.729002] usb 1-2: reset full-speed USB device number 6 using xhci_hcd [ 537.320180] usb 1-1: unable to read config index 0 descriptor/all [ 537.320192] usb 1-1: can't read configurations, error -71 [ 537.656352] usb 1-1: new full-speed USB device number 15 using xhci_hcd [ 537.677955] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 537.677962] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 537.677964] usb 1-1: Product: ConBee II [ 537.677965] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 537.677967] usb 1-1: SerialNumber: DE2227330 [ 537.678031] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 537.678047] No Local Variables are initialized for Method [_PLD] [ 537.678049] No Arguments are initialized for method [_PLD] [ 537.678051] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 537.679636] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 537.679649] No Local Variables are initialized for Method [_PLD] [ 537.679650] No Arguments are initialized for method [_PLD] [ 537.679652] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 537.679851] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 537.679887] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 537.679895] No Local Variables are initialized for Method [_PLD] [ 537.679897] No Arguments are initialized for method [_PLD] [ 537.679898] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 539.876612] usb 1-1: reset full-speed USB device number 15 using xhci_hcd [ 541.139994] usb 1-1: USB disconnect, device number 15 [ 541.488340] usb 1-1: new full-speed USB device number 16 using xhci_hcd [ 541.764742] usb 1-3: reset full-speed USB device number 7 using xhci_hcd [ 541.913599] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [ 542.040695] usb 1-2: reset full-speed USB device number 6 using xhci_hcd [ 542.191661] Bluetooth: hci0: urb 000000000cff1a3d failed to resubmit (2) [ 544.196484] Bluetooth: hci0: command 0x1001 tx timeout [ 546.660582] usb 1-1: unable to read config index 0 descriptor/all [ 546.660591] usb 1-1: can't read configurations, error -110 [ 546.788459] usb 1-1: new full-speed USB device number 17 using xhci_hcd [ 552.036542] usb 1-1: unable to read config index 0 descriptor/all [ 552.036550] usb 1-1: can't read configurations, error -110 [ 552.036665] usb usb1-port1: attempt power cycle [ 552.292424] Bluetooth: hci0: CSR: Local version failed (-110) [ 552.448261] usb 1-1: new full-speed USB device number 18 using xhci_hcd [ 552.712713] usb 1-3: reset full-speed USB device number 7 using xhci_hcd [ 553.420716] usb 1-2: reset full-speed USB device number 6 using xhci_hcd [ 556.802466] usb 1-1: unable to read config index 0 descriptor/all [ 556.802476] usb 1-1: can't read configurations, error -71 [ 557.136397] usb 1-1: new full-speed USB device number 19 using xhci_hcd [ 557.158071] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 557.158076] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 557.158078] usb 1-1: Product: ConBee II [ 557.158079] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 557.158080] usb 1-1: SerialNumber: DE2227330 [ 557.158134] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 557.158147] No Local Variables are initialized for Method [_PLD] [ 557.158148] No Arguments are initialized for method [_PLD] [ 557.158150] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 557.164425] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 557.164440] No Local Variables are initialized for Method [_PLD] [ 557.164441] No Arguments are initialized for method [_PLD] [ 557.164443] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 557.164645] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 557.164678] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 557.164686] No Local Variables are initialized for Method [_PLD] [ 557.164687] No Arguments are initialized for method [_PLD] [ 557.164688] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 558.564431] usb 1-1: reset full-speed USB device number 19 using xhci_hcd [ 560.624866] usb 1-1: USB disconnect, device number 19 [ 560.972373] usb 1-1: new full-speed USB device number 20 using xhci_hcd [ 562.428337] usb 1-3: reset full-speed USB device number 7 using xhci_hcd [ 562.588971] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [ 562.724339] usb 1-2: reset full-speed USB device number 6 using xhci_hcd [ 564.900320] Bluetooth: hci0: command 0x1001 tx timeout [ 566.372256] usb 1-1: unable to read config index 0 descriptor/all [ 566.372266] usb 1-1: can't read configurations, error -110 [ 566.500308] usb 1-1: new full-speed USB device number 21 using xhci_hcd [ 566.649993] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 566.649999] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 566.650000] usb 1-1: Product: ConBee II [ 566.650002] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 566.650003] usb 1-1: SerialNumber: DE2227330 [ 566.650059] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 566.650072] No Local Variables are initialized for Method [_PLD] [ 566.650073] No Arguments are initialized for method [_PLD] [ 566.650075] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 566.651616] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 566.651627] No Local Variables are initialized for Method [_PLD] [ 566.651628] No Arguments are initialized for method [_PLD] [ 566.651630] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 566.651866] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 566.651899] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330) [ 566.651907] No Local Variables are initialized for Method [_PLD] [ 566.651908] No Arguments are initialized for method [_PLD] [ 566.651910] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 573.028244] Bluetooth: hci0: CSR: Local version failed (-110) [ 573.448320] usb 1-3: reset full-speed USB device number 7 using xhci_hcd [ 574.148323] usb 1-2: reset full-speed USB device number 6 using xhci_hcd [ 575.296299] usb 1-1: reset full-speed USB device number 21 using xhci_hcd