Off: No heating, only frost protection.
Heat: Room temperature will be kept at the configured setpoint.
Heat Eco: Energy save heating mode. Room temperature will be lowered to the configured eco setpoint in order to save energy.
Full Power: Full power heating. This mode is left automatically after 5 minutes.
Manufacturer Specific: Direct valve control mode. The valve opening percentage can be controlled using the switch multilevel command class.
Allows rotating the LCD contents by 180 degrees.
Default: Normal
0: No Timeout, LCD always on.
5-30: Timeout after 5-30s.
Default: 0 (LCD always on)
Default: Backlight enabled
Default: Send once a day
0: Don't send temperature automatically.
1-50: Report temperature at 0.1-5.0°C temperature difference.
Default: 5 (Delta = 0.5°C)
0: Don't send Valve opening percentage automatically.
1-100: Report valve opening percentage at a delta of 1-100%.
Default: 0
Default: Medium sensibility
206-255: -5.0 to -0.1°C.
0-50: 0°C-5°C.
128: External Temperature Sensor.
Default: 0 (0.0°C Offset)