[  650.701443] usb 1-1: Product: ConBee II
[  650.701444] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  650.701445] usb 1-1: SerialNumber: DE2227330
[  650.701498] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  650.701512] No Local Variables are initialized for Method [_PLD]

[  650.701514] No Arguments are initialized for method [_PLD]

[  650.701515] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  650.703128] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  650.703139] No Local Variables are initialized for Method [_PLD]

[  650.703140] No Arguments are initialized for method [_PLD]

[  650.703141] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  650.703418] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[  650.703459] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  650.703472] No Local Variables are initialized for Method [_PLD]

[  650.703473] No Arguments are initialized for method [_PLD]

[  650.703475] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  651.547277] Bluetooth: hci1: CSR: Local version failed (-110)
[  652.567648] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[  653.819672] usb 1-1: reset full-speed USB device number 80 using xhci_hcd
[  957.057301] usb 1-1: USB disconnect, device number 80
[  957.365377] usb 1-1: new full-speed USB device number 81 using xhci_hcd
[  957.515232] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  957.515238] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  957.515239] usb 1-1: Product: ConBee II
[  957.515240] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  957.515241] usb 1-1: SerialNumber: DE2227330
[  957.515293] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  957.515307] No Local Variables are initialized for Method [_PLD]

[  957.515309] No Arguments are initialized for method [_PLD]

[  957.515310] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  957.516940] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  957.516949] No Local Variables are initialized for Method [_PLD]

[  957.516950] No Arguments are initialized for method [_PLD]

[  957.516952] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  957.517167] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[  957.517219] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  957.517232] No Local Variables are initialized for Method [_PLD]

[  957.517233] No Arguments are initialized for method [_PLD]

[  957.517235] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  960.871429] usb 1-1: USB disconnect, device number 81
[  961.249365] usb 1-1: new full-speed USB device number 82 using xhci_hcd
[  961.399432] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  961.399438] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  961.399439] usb 1-1: Product: ConBee II
[  961.399440] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  961.399441] usb 1-1: SerialNumber: DE2227330
[  961.399493] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  961.399507] No Local Variables are initialized for Method [_PLD]

[  961.399508] No Arguments are initialized for method [_PLD]

[  961.399510] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  961.401124] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  961.401133] No Local Variables are initialized for Method [_PLD]

[  961.401134] No Arguments are initialized for method [_PLD]

[  961.401136] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[  961.401417] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[  961.401470] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[  961.401483] No Local Variables are initialized for Method [_PLD]

[  961.401484] No Arguments are initialized for method [_PLD]

[  961.401486] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1854.454542] usb 1-1: USB disconnect, device number 82
[ 1854.767961] usb 1-1: new full-speed USB device number 83 using xhci_hcd
[ 1854.917988] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1854.917994] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1854.917995] usb 1-1: Product: ConBee II
[ 1854.917996] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1854.917998] usb 1-1: SerialNumber: DE2227330
[ 1854.918050] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1854.918065] No Local Variables are initialized for Method [_PLD]

[ 1854.918066] No Arguments are initialized for method [_PLD]

[ 1854.918068] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1854.919671] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1854.919679] No Local Variables are initialized for Method [_PLD]

[ 1854.919680] No Arguments are initialized for method [_PLD]

[ 1854.919682] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1854.919904] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1854.919941] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1854.919949] No Local Variables are initialized for Method [_PLD]

[ 1854.919950] No Arguments are initialized for method [_PLD]

[ 1854.919952] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1858.274106] usb 1-1: USB disconnect, device number 83
[ 1858.651811] usb 1-1: new full-speed USB device number 84 using xhci_hcd
[ 1859.780403] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1859.929623] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1860.060375] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1860.219554] Bluetooth: hci1: urb 000000002957d1b2 failed to resubmit (2)
[ 1862.227914] Bluetooth: hci1: command 0x1001 tx timeout
[ 1863.956014] usb 1-1: unable to read config index 0 descriptor/all
[ 1863.956023] usb 1-1: can't read configurations, error -110
[ 1864.083886] usb 1-1: new full-speed USB device number 85 using xhci_hcd
[ 1869.331948] usb 1-1: unable to read config index 0 descriptor/all
[ 1869.331957] usb 1-1: can't read configurations, error -110
[ 1869.332028] usb usb1-port1: attempt power cycle
[ 1869.743866] usb 1-1: new full-speed USB device number 86 using xhci_hcd
[ 1870.355839] Bluetooth: hci1: CSR: Local version failed (-110)
[ 1870.776315] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1871.348338] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1873.962050] usb 1-1: unable to read config index 0 descriptor/all
[ 1873.962059] usb 1-1: can't read configurations, error -71
[ 1874.299704] usb 1-1: new full-speed USB device number 87 using xhci_hcd
[ 1874.321801] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1874.321807] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1874.321808] usb 1-1: Product: ConBee II
[ 1874.321809] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1874.321810] usb 1-1: SerialNumber: DE2227330
[ 1874.321864] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1874.321877] No Local Variables are initialized for Method [_PLD]

[ 1874.321879] No Arguments are initialized for method [_PLD]

[ 1874.321880] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1874.323562] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1874.323574] No Local Variables are initialized for Method [_PLD]

[ 1874.323576] No Arguments are initialized for method [_PLD]

[ 1874.323577] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1874.323790] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1874.323832] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1874.323841] No Local Variables are initialized for Method [_PLD]

[ 1874.323843] No Arguments are initialized for method [_PLD]

[ 1874.323844] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1877.777998] usb 1-1: USB disconnect, device number 87
[ 1878.127589] usb 1-1: new full-speed USB device number 88 using xhci_hcd
[ 1878.487781] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1878.636409] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1878.763782] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1880.947772] Bluetooth: hci1: command 0x1001 tx timeout
[ 1883.411859] usb 1-1: unable to read config index 0 descriptor/all
[ 1883.411869] usb 1-1: can't read configurations, error -110
[ 1883.539741] usb 1-1: new full-speed USB device number 89 using xhci_hcd
[ 1888.787798] usb 1-1: unable to read config index 0 descriptor/all
[ 1888.787807] usb 1-1: can't read configurations, error -110
[ 1888.787874] usb usb1-port1: attempt power cycle
[ 1889.043700] Bluetooth: hci1: CSR: Local version failed (-110)
[ 1889.199597] usb 1-1: new full-speed USB device number 90 using xhci_hcd
[ 1893.479146] usb 1-1: unable to read config index 0 descriptor/all
[ 1893.479155] usb 1-1: can't read configurations, error -71
[ 1893.811673] usb 1-1: new full-speed USB device number 91 using xhci_hcd
[ 1893.833528] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1893.833533] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1893.833534] usb 1-1: Product: ConBee II
[ 1893.833536] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1893.833537] usb 1-1: SerialNumber: DE2227330
[ 1893.833589] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1893.833602] No Local Variables are initialized for Method [_PLD]

[ 1893.833603] No Arguments are initialized for method [_PLD]

[ 1893.833605] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1893.839960] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1893.839975] No Local Variables are initialized for Method [_PLD]

[ 1893.839976] No Arguments are initialized for method [_PLD]

[ 1893.839978] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1893.840226] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1893.840256] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1893.840264] No Local Variables are initialized for Method [_PLD]

[ 1893.840265] No Arguments are initialized for method [_PLD]

[ 1893.840267] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1897.292300] usb 1-1: USB disconnect, device number 91
[ 1897.639657] usb 1-1: new full-speed USB device number 92 using xhci_hcd
[ 1899.176102] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1899.325416] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1899.452052] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1899.611003] Bluetooth: hci1: urb 00000000b1f5177a failed to resubmit (2)
[ 1901.619617] Bluetooth: hci1: command 0x1001 tx timeout
[ 1902.867712] usb 1-1: unable to read config index 0 descriptor/all
[ 1902.867722] usb 1-1: can't read configurations, error -110
[ 1902.995412] usb 1-1: new full-speed USB device number 93 using xhci_hcd
[ 1908.243698] usb 1-1: unable to read config index 0 descriptor/all
[ 1908.243707] usb 1-1: can't read configurations, error -110
[ 1908.243769] usb usb1-port1: attempt power cycle
[ 1908.655569] usb 1-1: new full-speed USB device number 94 using xhci_hcd
[ 1909.779565] Bluetooth: hci1: CSR: Local version failed (-110)
[ 1913.002553] usb 1-1: unable to read config index 0 descriptor/all
[ 1913.002562] usb 1-1: can't read configurations, error -71
[ 1913.335550] usb 1-1: new full-speed USB device number 95 using xhci_hcd
[ 1913.357528] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1913.357534] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1913.357536] usb 1-1: Product: ConBee II
[ 1913.357537] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1913.357538] usb 1-1: SerialNumber: DE2227330
[ 1913.357591] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1913.357604] No Local Variables are initialized for Method [_PLD]

[ 1913.357606] No Arguments are initialized for method [_PLD]

[ 1913.357607] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1913.363904] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1913.363919] No Local Variables are initialized for Method [_PLD]

[ 1913.363920] No Arguments are initialized for method [_PLD]

[ 1913.363922] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1913.364134] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1913.364165] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1913.364172] No Local Variables are initialized for Method [_PLD]

[ 1913.364174] No Arguments are initialized for method [_PLD]

[ 1913.364175] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1916.815299] usb 1-1: USB disconnect, device number 95
[ 1917.195380] usb 1-1: new full-speed USB device number 96 using xhci_hcd
[ 1917.907975] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1918.057136] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1918.183977] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1920.371521] Bluetooth: hci1: command 0x1001 tx timeout
[ 1922.579597] usb 1-1: unable to read config index 0 descriptor/all
[ 1922.579606] usb 1-1: can't read configurations, error -110
[ 1922.707483] usb 1-1: new full-speed USB device number 97 using xhci_hcd
[ 1927.955558] usb 1-1: unable to read config index 0 descriptor/all
[ 1927.955567] usb 1-1: can't read configurations, error -110
[ 1927.955681] usb usb1-port1: attempt power cycle
[ 1928.371267] usb 1-1: new full-speed USB device number 98 using xhci_hcd
[ 1928.471267] Bluetooth: hci1: CSR: Local version failed (-110)
[ 1932.531765] usb 1-1: unable to read config index 0 descriptor/all
[ 1932.531774] usb 1-1: can't read configurations, error -71
[ 1932.867472] usb 1-1: new full-speed USB device number 99 using xhci_hcd
[ 1932.889061] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1932.889066] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1932.889067] usb 1-1: Product: ConBee II
[ 1932.889069] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1932.889070] usb 1-1: SerialNumber: DE2227330
[ 1932.889119] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1932.889132] No Local Variables are initialized for Method [_PLD]

[ 1932.889134] No Arguments are initialized for method [_PLD]

[ 1932.889135] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1932.890730] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1932.890740] No Local Variables are initialized for Method [_PLD]

[ 1932.890741] No Arguments are initialized for method [_PLD]

[ 1932.890743] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1932.890969] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1932.891006] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1932.891017] No Local Variables are initialized for Method [_PLD]

[ 1932.891019] No Arguments are initialized for method [_PLD]

[ 1932.891020] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1936.345859] usb 1-1: USB disconnect, device number 99
[ 1936.599893] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1936.748976] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1936.875427] usb 1-1: new full-speed USB device number 100 using xhci_hcd
[ 1937.151906] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1939.315433] Bluetooth: hci1: command 0x1001 tx timeout
[ 1942.035486] usb 1-1: unable to read config index 0 descriptor/all
[ 1942.035495] usb 1-1: can't read configurations, error -110
[ 1942.163379] usb 1-1: new full-speed USB device number 101 using xhci_hcd
[ 1947.411355] Bluetooth: hci1: CSR: Local version failed (-110)
[ 1947.411483] usb 1-1: unable to read config index 0 descriptor/all
[ 1947.411488] usb 1-1: can't read configurations, error -110
[ 1947.411559] usb usb1-port1: attempt power cycle
[ 1947.823357] usb 1-1: new full-speed USB device number 102 using xhci_hcd
[ 1952.066715] usb 1-1: unable to read config index 0 descriptor/all
[ 1952.066724] usb 1-1: can't read configurations, error -71
[ 1952.399332] usb 1-1: new full-speed USB device number 103 using xhci_hcd
[ 1952.421418] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1952.421424] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1952.421425] usb 1-1: Product: ConBee II
[ 1952.421426] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1952.421428] usb 1-1: SerialNumber: DE2227330
[ 1952.421480] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1952.421494] No Local Variables are initialized for Method [_PLD]

[ 1952.421495] No Arguments are initialized for method [_PLD]

[ 1952.421497] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1952.423047] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1952.423059] No Local Variables are initialized for Method [_PLD]

[ 1952.423060] No Arguments are initialized for method [_PLD]

[ 1952.423062] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1952.423259] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1952.423312] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1952.423325] No Local Variables are initialized for Method [_PLD]

[ 1952.423327] No Arguments are initialized for method [_PLD]

[ 1952.423328] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1955.879556] usb 1-1: USB disconnect, device number 103
[ 1956.227302] usb 1-1: new full-speed USB device number 104 using xhci_hcd
[ 1957.543769] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1957.693044] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1957.819779] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1959.987301] Bluetooth: hci1: command 0x1001 tx timeout
[ 1961.491367] usb 1-1: unable to read config index 0 descriptor/all
[ 1961.491377] usb 1-1: can't read configurations, error -110
[ 1961.619279] usb 1-1: new full-speed USB device number 105 using xhci_hcd
[ 1966.867354] usb 1-1: unable to read config index 0 descriptor/all
[ 1966.867363] usb 1-1: can't read configurations, error -110
[ 1966.867482] usb usb1-port1: attempt power cycle
[ 1967.279243] usb 1-1: new full-speed USB device number 106 using xhci_hcd
[ 1968.147239] Bluetooth: hci1: CSR: Local version failed (-110)
[ 1971.604439] usb 1-1: unable to read config index 0 descriptor/all
[ 1971.604449] usb 1-1: can't read configurations, error -71
[ 1971.939230] usb 1-1: new full-speed USB device number 107 using xhci_hcd
[ 1971.960763] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1971.960768] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1971.960770] usb 1-1: Product: ConBee II
[ 1971.960771] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1971.960772] usb 1-1: SerialNumber: DE2227330
[ 1971.960837] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1971.960851] No Local Variables are initialized for Method [_PLD]

[ 1971.960853] No Arguments are initialized for method [_PLD]

[ 1971.960855] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1971.962967] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1971.962984] No Local Variables are initialized for Method [_PLD]

[ 1971.962985] No Arguments are initialized for method [_PLD]

[ 1971.962987] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1971.963223] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1971.963267] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1971.963278] No Local Variables are initialized for Method [_PLD]

[ 1971.963279] No Arguments are initialized for method [_PLD]

[ 1971.963281] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1975.414683] usb 1-1: USB disconnect, device number 107
[ 1975.767043] usb 1-1: new full-speed USB device number 108 using xhci_hcd
[ 1976.275416] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1976.424751] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1976.551669] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1978.738979] Bluetooth: hci1: command 0x1001 tx timeout
[ 1980.947255] usb 1-1: unable to read config index 0 descriptor/all
[ 1980.947264] usb 1-1: can't read configurations, error -110
[ 1981.075150] usb 1-1: new full-speed USB device number 109 using xhci_hcd
[ 1986.323261] usb 1-1: unable to read config index 0 descriptor/all
[ 1986.323270] usb 1-1: can't read configurations, error -110
[ 1986.323387] usb usb1-port1: attempt power cycle
[ 1986.735132] usb 1-1: new full-speed USB device number 110 using xhci_hcd
[ 1986.835127] Bluetooth: hci1: CSR: Local version failed (-110)
[ 1987.855643] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1991.142850] usb 1-1: unable to read config index 0 descriptor/all
[ 1991.142859] usb 1-1: can't read configurations, error -71
[ 1991.483108] usb 1-1: new full-speed USB device number 111 using xhci_hcd
[ 1991.504949] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 1991.504954] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1991.504956] usb 1-1: Product: ConBee II
[ 1991.504957] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 1991.504958] usb 1-1: SerialNumber: DE2227330
[ 1991.505011] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1991.505024] No Local Variables are initialized for Method [_PLD]

[ 1991.505025] No Arguments are initialized for method [_PLD]

[ 1991.505027] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1991.506615] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1991.506626] No Local Variables are initialized for Method [_PLD]

[ 1991.506627] No Arguments are initialized for method [_PLD]

[ 1991.506629] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1991.506852] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 1991.506882] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 1991.506889] No Local Variables are initialized for Method [_PLD]

[ 1991.506891] No Arguments are initialized for method [_PLD]

[ 1991.506892] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 1993.107377] usb 1-1: reset full-speed USB device number 111 using xhci_hcd
[ 1994.956899] usb 1-1: USB disconnect, device number 111
[ 1995.339084] usb 1-1: new full-speed USB device number 112 using xhci_hcd
[ 1996.967556] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 1997.116828] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 1997.243504] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 1999.411076] Bluetooth: hci1: command 0x1001 tx timeout
[ 2000.659176] usb 1-1: unable to read config index 0 descriptor/all
[ 2000.659184] usb 1-1: can't read configurations, error -110
[ 2000.787045] usb 1-1: new full-speed USB device number 113 using xhci_hcd
[ 2006.035119] usb 1-1: unable to read config index 0 descriptor/all
[ 2006.035128] usb 1-1: can't read configurations, error -110
[ 2006.035249] usb usb1-port1: attempt power cycle
[ 2006.447012] usb 1-1: new full-speed USB device number 114 using xhci_hcd
[ 2007.571051] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2007.995481] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2008.571252] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2010.688850] usb 1-1: unable to read config index 0 descriptor/all
[ 2010.688859] usb 1-1: can't read configurations, error -71
[ 2011.022985] usb 1-1: new full-speed USB device number 115 using xhci_hcd
[ 2011.044545] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2011.044551] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2011.044552] usb 1-1: Product: ConBee II
[ 2011.044554] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2011.044555] usb 1-1: SerialNumber: DE2227330
[ 2011.044607] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2011.044620] No Local Variables are initialized for Method [_PLD]

[ 2011.044621] No Arguments are initialized for method [_PLD]

[ 2011.044623] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2011.046268] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2011.046280] No Local Variables are initialized for Method [_PLD]

[ 2011.046282] No Arguments are initialized for method [_PLD]

[ 2011.046284] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2011.046489] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2011.046522] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2011.046530] No Local Variables are initialized for Method [_PLD]

[ 2011.046532] No Arguments are initialized for method [_PLD]

[ 2011.046533] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2014.501693] usb 1-1: USB disconnect, device number 115
[ 2014.882979] usb 1-1: new full-speed USB device number 116 using xhci_hcd
[ 2015.699453] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2015.848642] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2015.975448] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2018.162941] Bluetooth: hci1: command 0x1001 tx timeout
[ 2020.115051] usb 1-1: unable to read config index 0 descriptor/all
[ 2020.115060] usb 1-1: can't read configurations, error -110
[ 2020.242931] usb 1-1: new full-speed USB device number 117 using xhci_hcd
[ 2025.491015] usb 1-1: unable to read config index 0 descriptor/all
[ 2025.491024] usb 1-1: can't read configurations, error -110
[ 2025.491150] usb usb1-port1: attempt power cycle
[ 2025.902807] usb 1-1: new full-speed USB device number 118 using xhci_hcd
[ 2026.258937] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2030.235444] usb 1-1: unable to read config index 0 descriptor/all
[ 2030.235455] usb 1-1: can't read configurations, error -71
[ 2030.570694] usb 1-1: new full-speed USB device number 119 using xhci_hcd
[ 2030.592231] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2030.592235] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2030.592236] usb 1-1: Product: ConBee II
[ 2030.592238] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2030.592239] usb 1-1: SerialNumber: DE2227330
[ 2030.592300] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2030.592316] No Local Variables are initialized for Method [_PLD]

[ 2030.592318] No Arguments are initialized for method [_PLD]

[ 2030.592320] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2030.593938] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2030.593950] No Local Variables are initialized for Method [_PLD]

[ 2030.593952] No Arguments are initialized for method [_PLD]

[ 2030.593953] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2030.594152] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2030.594185] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2030.594193] No Local Variables are initialized for Method [_PLD]

[ 2030.594194] No Arguments are initialized for method [_PLD]

[ 2030.594196] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2034.047420] usb 1-1: USB disconnect, device number 119
[ 2034.387335] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2034.536354] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2034.662866] usb 1-1: new full-speed USB device number 120 using xhci_hcd
[ 2034.939334] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2037.106830] Bluetooth: hci1: command 0x1001 tx timeout
[ 2039.826784] usb 1-1: unable to read config index 0 descriptor/all
[ 2039.826794] usb 1-1: can't read configurations, error -110
[ 2039.954830] usb 1-1: new full-speed USB device number 121 using xhci_hcd
[ 2045.202800] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2045.203423] usb 1-1: unable to read config index 0 descriptor/all
[ 2045.203433] usb 1-1: can't read configurations, error -110
[ 2045.203509] usb usb1-port1: attempt power cycle
[ 2045.614650] usb 1-1: new full-speed USB device number 122 using xhci_hcd
[ 2049.783270] usb 1-1: unable to read config index 0 descriptor/all
[ 2049.783280] usb 1-1: can't read configurations, error -71
[ 2050.118761] usb 1-1: new full-speed USB device number 123 using xhci_hcd
[ 2050.140802] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2050.140808] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2050.140809] usb 1-1: Product: ConBee II
[ 2050.140810] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2050.140811] usb 1-1: SerialNumber: DE2227330
[ 2050.140863] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2050.140877] No Local Variables are initialized for Method [_PLD]

[ 2050.140878] No Arguments are initialized for method [_PLD]

[ 2050.140880] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2050.142442] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2050.142453] No Local Variables are initialized for Method [_PLD]

[ 2050.142455] No Arguments are initialized for method [_PLD]

[ 2050.142456] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2050.142698] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2050.142737] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2050.142750] No Local Variables are initialized for Method [_PLD]

[ 2050.142752] No Arguments are initialized for method [_PLD]

[ 2050.142753] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2053.598036] usb 1-1: USB disconnect, device number 123
[ 2053.946552] usb 1-1: new full-speed USB device number 124 using xhci_hcd
[ 2055.338742] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2055.487364] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2055.614740] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2057.778713] Bluetooth: hci1: command 0x1001 tx timeout
[ 2059.282822] usb 1-1: unable to read config index 0 descriptor/all
[ 2059.282832] usb 1-1: can't read configurations, error -110
[ 2059.410714] usb 1-1: new full-speed USB device number 125 using xhci_hcd
[ 2064.658799] usb 1-1: unable to read config index 0 descriptor/all
[ 2064.658808] usb 1-1: can't read configurations, error -110
[ 2064.658873] usb usb1-port1: attempt power cycle
[ 2065.070628] usb 1-1: new full-speed USB device number 126 using xhci_hcd
[ 2065.938681] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2069.335734] usb 1-1: unable to read config index 0 descriptor/all
[ 2069.335744] usb 1-1: can't read configurations, error -71
[ 2069.670647] usb 1-1: new full-speed USB device number 127 using xhci_hcd
[ 2069.692628] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2069.692634] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2069.692635] usb 1-1: Product: ConBee II
[ 2069.692636] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2069.692637] usb 1-1: SerialNumber: DE2227330
[ 2069.692688] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2069.692704] No Local Variables are initialized for Method [_PLD]

[ 2069.692705] No Arguments are initialized for method [_PLD]

[ 2069.692707] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2069.694425] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2069.694436] No Local Variables are initialized for Method [_PLD]

[ 2069.694437] No Arguments are initialized for method [_PLD]

[ 2069.694438] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2069.694684] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2069.694731] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2069.694741] No Local Variables are initialized for Method [_PLD]

[ 2069.694743] No Arguments are initialized for method [_PLD]

[ 2069.694744] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2073.149255] usb 1-1: USB disconnect, device number 127
[ 2073.526636] usb 1-1: new full-speed USB device number 4 using xhci_hcd
[ 2074.067084] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2074.216478] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2074.343096] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2074.502210] Bluetooth: hci1: urb 00000000a6e3b669 failed to resubmit (2)
[ 2076.530603] Bluetooth: hci1: command 0x1001 tx timeout
[ 2078.738705] usb 1-1: unable to read config index 0 descriptor/all
[ 2078.738715] usb 1-1: can't read configurations, error -110
[ 2078.866590] usb 1-1: new full-speed USB device number 6 using xhci_hcd
[ 2084.114674] usb 1-1: unable to read config index 0 descriptor/all
[ 2084.114684] usb 1-1: can't read configurations, error -110
[ 2084.114754] usb usb1-port1: attempt power cycle
[ 2084.526560] usb 1-1: new full-speed USB device number 7 using xhci_hcd
[ 2084.626567] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2088.889430] usb 1-1: unable to read config index 0 descriptor/all
[ 2088.889440] usb 1-1: can't read configurations, error -71
[ 2089.222441] usb 1-1: new full-speed USB device number 8 using xhci_hcd
[ 2089.244307] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2089.244312] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2089.244313] usb 1-1: Product: ConBee II
[ 2089.244314] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2089.244315] usb 1-1: SerialNumber: DE2227330
[ 2089.244367] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2089.244381] No Local Variables are initialized for Method [_PLD]

[ 2089.244382] No Arguments are initialized for method [_PLD]

[ 2089.244384] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2089.246112] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2089.246125] No Local Variables are initialized for Method [_PLD]

[ 2089.246126] No Arguments are initialized for method [_PLD]

[ 2089.246128] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2089.246324] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2089.246377] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2089.246388] No Local Variables are initialized for Method [_PLD]

[ 2089.246389] No Arguments are initialized for method [_PLD]

[ 2089.246391] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2092.701906] usb 1-1: USB disconnect, device number 8
[ 2093.046514] usb 1-1: new full-speed USB device number 9 using xhci_hcd
[ 2094.754919] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2094.904285] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2095.030978] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2095.190114] Bluetooth: hci1: urb 00000000a957126c failed to resubmit (2)
[ 2097.202493] Bluetooth: hci1: command 0x1001 tx timeout
[ 2098.450595] usb 1-1: unable to read config index 0 descriptor/all
[ 2098.450605] usb 1-1: can't read configurations, error -110
[ 2098.578505] usb 1-1: new full-speed USB device number 10 using xhci_hcd
[ 2103.826555] usb 1-1: unable to read config index 0 descriptor/all
[ 2103.826564] usb 1-1: can't read configurations, error -110
[ 2103.826634] usb usb1-port1: attempt power cycle
[ 2104.238387] usb 1-1: new full-speed USB device number 11 using xhci_hcd
[ 2105.362256] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2108.444286] usb 1-1: unable to read config index 0 descriptor/all
[ 2108.444295] usb 1-1: can't read configurations, error -71
[ 2108.778437] usb 1-1: new full-speed USB device number 12 using xhci_hcd
[ 2108.799988] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2108.799993] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2108.799994] usb 1-1: Product: ConBee II
[ 2108.799995] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2108.799996] usb 1-1: SerialNumber: DE2227330
[ 2108.800048] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2108.800062] No Local Variables are initialized for Method [_PLD]

[ 2108.800063] No Arguments are initialized for method [_PLD]

[ 2108.800065] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2108.801721] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2108.801735] No Local Variables are initialized for Method [_PLD]

[ 2108.801736] No Arguments are initialized for method [_PLD]

[ 2108.801738] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2108.801952] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2108.801987] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2108.801995] No Local Variables are initialized for Method [_PLD]

[ 2108.801997] No Arguments are initialized for method [_PLD]

[ 2108.801998] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2112.254134] usb 1-1: USB disconnect, device number 12
[ 2112.602453] usb 1-1: new full-speed USB device number 13 using xhci_hcd
[ 2113.490529] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2113.640040] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2113.766870] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2113.925524] Bluetooth: hci1: urb 0000000095b26107 failed to resubmit (2)
[ 2115.954401] Bluetooth: hci1: command 0x1001 tx timeout
[ 2117.906554] usb 1-1: unable to read config index 0 descriptor/all
[ 2117.906564] usb 1-1: can't read configurations, error -110
[ 2118.034362] usb 1-1: new full-speed USB device number 14 using xhci_hcd
[ 2118.184435] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2118.184440] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2118.184441] usb 1-1: Product: ConBee II
[ 2118.184442] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2118.184444] usb 1-1: SerialNumber: DE2227330
[ 2118.184498] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2118.184512] No Local Variables are initialized for Method [_PLD]

[ 2118.184513] No Arguments are initialized for method [_PLD]

[ 2118.184515] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2118.186161] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2118.186179] No Local Variables are initialized for Method [_PLD]

[ 2118.186181] No Arguments are initialized for method [_PLD]

[ 2118.186183] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2118.186443] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2118.186488] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2118.186497] No Local Variables are initialized for Method [_PLD]

[ 2118.186498] No Arguments are initialized for method [_PLD]

[ 2118.186500] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2124.050347] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2125.074803] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2126.318750] usb 1-1: reset full-speed USB device number 14 using xhci_hcd
[ 2498.504753] usb 1-1: USB disconnect, device number 14
[ 2498.812150] usb 1-1: new full-speed USB device number 15 using xhci_hcd
[ 2498.961683] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2498.961688] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2498.961690] usb 1-1: Product: ConBee II
[ 2498.961691] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2498.961692] usb 1-1: SerialNumber: DE2227330
[ 2498.961744] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2498.961757] No Local Variables are initialized for Method [_PLD]

[ 2498.961758] No Arguments are initialized for method [_PLD]

[ 2498.961760] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2498.963544] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2498.963554] No Local Variables are initialized for Method [_PLD]

[ 2498.963556] No Arguments are initialized for method [_PLD]

[ 2498.963557] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2498.963738] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2498.963766] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2498.963772] No Local Variables are initialized for Method [_PLD]

[ 2498.963774] No Arguments are initialized for method [_PLD]

[ 2498.963775] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2502.325279] usb 1-1: USB disconnect, device number 15
[ 2502.704142] usb 1-1: new full-speed USB device number 16 using xhci_hcd
[ 2504.212528] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2504.361699] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2504.488589] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2504.647607] Bluetooth: hci1: urb 000000003e6c27e8 failed to resubmit (2)
[ 2506.672101] Bluetooth: hci1: command 0x1001 tx timeout
[ 2508.048195] usb 1-1: unable to read config index 0 descriptor/all
[ 2508.048204] usb 1-1: can't read configurations, error -110
[ 2508.176091] usb 1-1: new full-speed USB device number 17 using xhci_hcd
[ 2513.424174] usb 1-1: unable to read config index 0 descriptor/all
[ 2513.424183] usb 1-1: can't read configurations, error -110
[ 2513.424299] usb usb1-port1: attempt power cycle
[ 2513.836051] usb 1-1: new full-speed USB device number 18 using xhci_hcd
[ 2514.704064] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2515.120489] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2515.692542] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2518.009917] usb 1-1: unable to read config index 0 descriptor/all
[ 2518.009927] usb 1-1: can't read configurations, error -71
[ 2518.343967] usb 1-1: new full-speed USB device number 19 using xhci_hcd
[ 2518.365761] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2518.365766] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2518.365767] usb 1-1: Product: ConBee II
[ 2518.365769] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2518.365770] usb 1-1: SerialNumber: DE2227330
[ 2518.365819] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2518.365833] No Local Variables are initialized for Method [_PLD]

[ 2518.365834] No Arguments are initialized for method [_PLD]

[ 2518.365836] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2518.367421] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2518.367432] No Local Variables are initialized for Method [_PLD]

[ 2518.367433] No Arguments are initialized for method [_PLD]

[ 2518.367435] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2518.367656] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2518.367692] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2518.367702] No Local Variables are initialized for Method [_PLD]

[ 2518.367704] No Arguments are initialized for method [_PLD]

[ 2518.367705] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2521.827156] usb 1-1: USB disconnect, device number 19
[ 2522.203825] usb 1-1: new full-speed USB device number 20 using xhci_hcd
[ 2522.832283] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2522.981773] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2523.108500] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2523.267488] Bluetooth: hci1: urb 00000000dff79706 failed to resubmit (2)
[ 2525.295988] Bluetooth: hci1: command 0x1001 tx timeout
[ 2527.504100] usb 1-1: unable to read config index 0 descriptor/all
[ 2527.504109] usb 1-1: can't read configurations, error -110
[ 2527.631971] usb 1-1: new full-speed USB device number 21 using xhci_hcd
[ 2532.880049] usb 1-1: unable to read config index 0 descriptor/all
[ 2532.880058] usb 1-1: can't read configurations, error -110
[ 2532.880172] usb usb1-port1: attempt power cycle
[ 2533.291952] usb 1-1: new full-speed USB device number 22 using xhci_hcd
[ 2533.391940] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2537.525819] usb 1-1: unable to read config index 0 descriptor/all
[ 2537.525828] usb 1-1: can't read configurations, error -71
[ 2537.859923] usb 1-1: new full-speed USB device number 23 using xhci_hcd
[ 2537.881597] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2537.881602] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2537.881604] usb 1-1: Product: ConBee II
[ 2537.881605] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2537.881606] usb 1-1: SerialNumber: DE2227330
[ 2537.881656] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2537.881670] No Local Variables are initialized for Method [_PLD]

[ 2537.881671] No Arguments are initialized for method [_PLD]

[ 2537.881673] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2537.883506] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2537.883518] No Local Variables are initialized for Method [_PLD]

[ 2537.883519] No Arguments are initialized for method [_PLD]

[ 2537.883521] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2537.884431] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2537.884472] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2537.884481] No Local Variables are initialized for Method [_PLD]

[ 2537.884482] No Arguments are initialized for method [_PLD]

[ 2537.884484] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2541.341955] usb 1-1: USB disconnect, device number 23
[ 2541.520382] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2541.669494] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2541.795887] usb 1-1: new full-speed USB device number 25 using xhci_hcd
[ 2542.072363] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2544.239863] Bluetooth: hci1: command 0x1001 tx timeout
[ 2546.959974] usb 1-1: unable to read config index 0 descriptor/all
[ 2546.959983] usb 1-1: can't read configurations, error -110
[ 2547.087867] usb 1-1: new full-speed USB device number 26 using xhci_hcd
[ 2552.335841] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2552.336462] usb 1-1: unable to read config index 0 descriptor/all
[ 2552.336471] usb 1-1: can't read configurations, error -110
[ 2552.336555] usb usb1-port1: attempt power cycle
[ 2552.747833] usb 1-1: new full-speed USB device number 27 using xhci_hcd
[ 2557.048805] usb 1-1: unable to read config index 0 descriptor/all
[ 2557.048814] usb 1-1: can't read configurations, error -71
[ 2557.387814] usb 1-1: new full-speed USB device number 28 using xhci_hcd
[ 2557.409166] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2557.409171] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2557.409173] usb 1-1: Product: ConBee II
[ 2557.409174] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2557.409176] usb 1-1: SerialNumber: DE2227330
[ 2557.409228] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2557.409240] No Local Variables are initialized for Method [_PLD]

[ 2557.409242] No Arguments are initialized for method [_PLD]

[ 2557.409243] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2557.415634] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2557.415655] No Local Variables are initialized for Method [_PLD]

[ 2557.415657] No Arguments are initialized for method [_PLD]

[ 2557.415658] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2557.415900] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2557.415938] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2557.415946] No Local Variables are initialized for Method [_PLD]

[ 2557.415948] No Arguments are initialized for method [_PLD]

[ 2557.415949] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2560.861628] usb 1-1: USB disconnect, device number 28
[ 2561.219585] usb 1-1: new full-speed USB device number 29 using xhci_hcd
[ 2562.468190] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2562.617516] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2562.744244] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2564.911740] Bluetooth: hci1: command 0x1001 tx timeout
[ 2566.415713] usb 1-1: unable to read config index 0 descriptor/all
[ 2566.415723] usb 1-1: can't read configurations, error -110
[ 2566.543732] usb 1-1: new full-speed USB device number 30 using xhci_hcd
[ 2571.791791] usb 1-1: unable to read config index 0 descriptor/all
[ 2571.791800] usb 1-1: can't read configurations, error -110
[ 2571.791914] usb usb1-port1: attempt power cycle
[ 2572.203694] usb 1-1: new full-speed USB device number 31 using xhci_hcd
[ 2573.071714] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2576.574539] usb 1-1: unable to read config index 0 descriptor/all
[ 2576.574549] usb 1-1: can't read configurations, error -71
[ 2576.907671] usb 1-1: new full-speed USB device number 32 using xhci_hcd
[ 2576.929063] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2576.929069] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2576.929070] usb 1-1: Product: ConBee II
[ 2576.929071] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2576.929072] usb 1-1: SerialNumber: DE2227330
[ 2576.929128] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2576.929143] No Local Variables are initialized for Method [_PLD]

[ 2576.929144] No Arguments are initialized for method [_PLD]

[ 2576.929146] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2576.935904] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2576.935920] No Local Variables are initialized for Method [_PLD]

[ 2576.935921] No Arguments are initialized for method [_PLD]

[ 2576.935923] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2576.936169] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2576.936212] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2576.936221] No Local Variables are initialized for Method [_PLD]

[ 2576.936223] No Arguments are initialized for method [_PLD]

[ 2576.936224] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2580.388998] usb 1-1: USB disconnect, device number 32
[ 2580.771651] usb 1-1: new full-speed USB device number 33 using xhci_hcd
[ 2581.200138] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2581.349285] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2581.476111] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2583.663652] Bluetooth: hci1: command 0x1001 tx timeout
[ 2586.127501] usb 1-1: unable to read config index 0 descriptor/all
[ 2586.127512] usb 1-1: can't read configurations, error -110
[ 2586.255419] usb 1-1: new full-speed USB device number 34 using xhci_hcd
[ 2591.503711] usb 1-1: unable to read config index 0 descriptor/all
[ 2591.503720] usb 1-1: can't read configurations, error -110
[ 2591.503840] usb usb1-port1: attempt power cycle
[ 2591.759588] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2591.915595] usb 1-1: new full-speed USB device number 35 using xhci_hcd
[ 2596.105879] usb 1-1: unable to read config index 0 descriptor/all
[ 2596.105889] usb 1-1: can't read configurations, error -71
[ 2596.439557] usb 1-1: new full-speed USB device number 36 using xhci_hcd
[ 2596.461569] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2596.461574] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2596.461576] usb 1-1: Product: ConBee II
[ 2596.461577] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2596.461578] usb 1-1: SerialNumber: DE2227330
[ 2596.461631] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2596.461645] No Local Variables are initialized for Method [_PLD]

[ 2596.461647] No Arguments are initialized for method [_PLD]

[ 2596.461649] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2596.468525] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2596.468542] No Local Variables are initialized for Method [_PLD]

[ 2596.468544] No Arguments are initialized for method [_PLD]

[ 2596.468545] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2596.468749] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2596.468781] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2596.468789] No Local Variables are initialized for Method [_PLD]

[ 2596.468791] No Arguments are initialized for method [_PLD]

[ 2596.468792] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2599.919675] usb 1-1: USB disconnect, device number 36
[ 2600.303373] usb 1-1: new full-speed USB device number 37 using xhci_hcd
[ 2601.887928] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2602.037290] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2602.163979] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2602.323115] Bluetooth: hci1: urb 0000000021f4cf0f failed to resubmit (2)
[ 2604.335503] Bluetooth: hci1: command 0x1001 tx timeout
[ 2605.583587] usb 1-1: unable to read config index 0 descriptor/all
[ 2605.583596] usb 1-1: can't read configurations, error -110
[ 2605.711501] usb 1-1: new full-speed USB device number 38 using xhci_hcd
[ 2610.959554] usb 1-1: unable to read config index 0 descriptor/all
[ 2610.959563] usb 1-1: can't read configurations, error -110
[ 2610.959682] usb usb1-port1: attempt power cycle
[ 2611.379263] usb 1-1: new full-speed USB device number 39 using xhci_hcd
[ 2612.495253] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2615.641139] usb 1-1: unable to read config index 0 descriptor/all
[ 2615.641148] usb 1-1: can't read configurations, error -71
[ 2615.975428] usb 1-1: new full-speed USB device number 40 using xhci_hcd
[ 2615.997163] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2615.997170] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2615.997171] usb 1-1: Product: ConBee II
[ 2615.997172] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2615.997173] usb 1-1: SerialNumber: DE2227330
[ 2615.997223] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2615.997237] No Local Variables are initialized for Method [_PLD]

[ 2615.997238] No Arguments are initialized for method [_PLD]

[ 2615.997240] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2616.003987] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2616.004002] No Local Variables are initialized for Method [_PLD]

[ 2616.004003] No Arguments are initialized for method [_PLD]

[ 2616.004005] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2616.004222] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2616.004264] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2616.004273] No Local Variables are initialized for Method [_PLD]

[ 2616.004274] No Arguments are initialized for method [_PLD]

[ 2616.004276] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2619.455056] usb 1-1: USB disconnect, device number 40
[ 2619.799404] usb 1-1: new full-speed USB device number 41 using xhci_hcd
[ 2620.623872] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2620.773034] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2620.899881] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2623.087401] Bluetooth: hci1: command 0x1001 tx timeout
[ 2625.039470] usb 1-1: unable to read config index 0 descriptor/all
[ 2625.039479] usb 1-1: can't read configurations, error -110
[ 2625.167377] usb 1-1: new full-speed USB device number 42 using xhci_hcd
[ 2630.415449] usb 1-1: unable to read config index 0 descriptor/all
[ 2630.415458] usb 1-1: can't read configurations, error -110
[ 2630.415580] usb usb1-port1: attempt power cycle
[ 2630.827329] usb 1-1: new full-speed USB device number 43 using xhci_hcd
[ 2631.183351] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2632.203803] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2635.179669] usb 1-1: unable to read config index 0 descriptor/all
[ 2635.179678] usb 1-1: can't read configurations, error -71
[ 2635.515316] usb 1-1: new full-speed USB device number 44 using xhci_hcd
[ 2635.537382] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2635.537388] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2635.537389] usb 1-1: Product: ConBee II
[ 2635.537390] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2635.537391] usb 1-1: SerialNumber: DE2227330
[ 2635.537446] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2635.537459] No Local Variables are initialized for Method [_PLD]

[ 2635.537461] No Arguments are initialized for method [_PLD]

[ 2635.537462] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2635.539201] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2635.539212] No Local Variables are initialized for Method [_PLD]

[ 2635.539213] No Arguments are initialized for method [_PLD]

[ 2635.539215] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2635.539455] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2635.539503] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2635.539511] No Local Variables are initialized for Method [_PLD]

[ 2635.539513] No Arguments are initialized for method [_PLD]

[ 2635.539514] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2637.455309] usb 1-1: reset full-speed USB device number 44 using xhci_hcd
[ 2638.993295] usb 1-1: USB disconnect, device number 44
[ 2639.311737] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2639.460788] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 2639.587282] usb 1-1: new full-speed USB device number 46 using xhci_hcd
[ 2639.737433] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 2639.737438] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2639.737440] usb 1-1: Product: ConBee II
[ 2639.737441] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 2639.737442] usb 1-1: SerialNumber: DE2227330
[ 2639.737493] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2639.737506] No Local Variables are initialized for Method [_PLD]

[ 2639.737507] No Arguments are initialized for method [_PLD]

[ 2639.737509] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2639.739094] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2639.739110] No Local Variables are initialized for Method [_PLD]

[ 2639.739111] No Arguments are initialized for method [_PLD]

[ 2639.739113] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2639.739343] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 2639.739402] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 2639.739410] No Local Variables are initialized for Method [_PLD]

[ 2639.739412] No Arguments are initialized for method [_PLD]

[ 2639.739418] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 2639.863750] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 2642.031251] Bluetooth: hci1: command 0x1001 tx timeout
[ 2650.127055] Bluetooth: hci1: CSR: Local version failed (-110)
[ 2650.411302] usb 1-1: reset full-speed USB device number 46 using xhci_hcd
[ 2651.111673] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 2651.691684] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3195.003075] usb 1-1: USB disconnect, device number 46
[ 3195.315811] usb 1-1: new full-speed USB device number 47 using xhci_hcd
[ 3195.469316] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3195.469322] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3195.469323] usb 1-1: Product: ConBee II
[ 3195.469325] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3195.469326] usb 1-1: SerialNumber: DE2227330
[ 3195.469378] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3195.469391] No Local Variables are initialized for Method [_PLD]

[ 3195.469392] No Arguments are initialized for method [_PLD]

[ 3195.469394] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3195.471014] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3195.471024] No Local Variables are initialized for Method [_PLD]

[ 3195.471025] No Arguments are initialized for method [_PLD]

[ 3195.471027] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3195.471217] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3195.471244] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3195.471251] No Local Variables are initialized for Method [_PLD]

[ 3195.471252] No Arguments are initialized for method [_PLD]

[ 3195.471254] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3198.827783] usb 1-1: USB disconnect, device number 47
[ 3199.179780] usb 1-1: new full-speed USB device number 48 using xhci_hcd
[ 3200.296225] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3200.445470] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3200.572221] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3202.731737] Bluetooth: hci1: command 0x1001 tx timeout
[ 3204.363823] usb 1-1: unable to read config index 0 descriptor/all
[ 3204.363832] usb 1-1: can't read configurations, error -110
[ 3204.491725] usb 1-1: new full-speed USB device number 49 using xhci_hcd
[ 3209.739807] usb 1-1: unable to read config index 0 descriptor/all
[ 3209.739815] usb 1-1: can't read configurations, error -110
[ 3209.739887] usb usb1-port1: attempt power cycle
[ 3210.155538] usb 1-1: new full-speed USB device number 50 using xhci_hcd
[ 3210.763683] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3211.180075] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3211.756179] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3214.502550] usb 1-1: unable to read config index 0 descriptor/all
[ 3214.502560] usb 1-1: can't read configurations, error -71
[ 3214.835551] usb 1-1: new full-speed USB device number 51 using xhci_hcd
[ 3214.857762] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3214.857767] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3214.857769] usb 1-1: Product: ConBee II
[ 3214.857770] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3214.857771] usb 1-1: SerialNumber: DE2227330
[ 3214.857823] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3214.857836] No Local Variables are initialized for Method [_PLD]

[ 3214.857837] No Arguments are initialized for method [_PLD]

[ 3214.857839] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3214.859388] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3214.859399] No Local Variables are initialized for Method [_PLD]

[ 3214.859400] No Arguments are initialized for method [_PLD]

[ 3214.859402] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3214.859594] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3214.859647] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3214.859656] No Local Variables are initialized for Method [_PLD]

[ 3214.859657] No Arguments are initialized for method [_PLD]

[ 3214.859659] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3218.322397] usb 1-1: USB disconnect, device number 51
[ 3218.667446] usb 1-1: new full-speed USB device number 52 using xhci_hcd
[ 3218.955642] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3219.112241] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3219.239641] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3221.419614] Bluetooth: hci1: command 0x1001 tx timeout
[ 3224.075701] usb 1-1: unable to read config index 0 descriptor/all
[ 3224.075710] usb 1-1: can't read configurations, error -110
[ 3224.203593] usb 1-1: new full-speed USB device number 53 using xhci_hcd
[ 3229.451569] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3229.451691] usb 1-1: unable to read config index 0 descriptor/all
[ 3229.451700] usb 1-1: can't read configurations, error -110
[ 3229.451761] usb usb1-port1: attempt power cycle
[ 3229.867591] usb 1-1: new full-speed USB device number 54 using xhci_hcd
[ 3234.010274] usb 1-1: unable to read config index 0 descriptor/all
[ 3234.010284] usb 1-1: can't read configurations, error -71
[ 3234.343550] usb 1-1: new full-speed USB device number 55 using xhci_hcd
[ 3234.369167] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3234.369172] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3234.369173] usb 1-1: Product: ConBee II
[ 3234.369175] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3234.369176] usb 1-1: SerialNumber: DE2227330
[ 3234.369229] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3234.369242] No Local Variables are initialized for Method [_PLD]

[ 3234.369243] No Arguments are initialized for method [_PLD]

[ 3234.369245] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3234.370989] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3234.371000] No Local Variables are initialized for Method [_PLD]

[ 3234.371001] No Arguments are initialized for method [_PLD]

[ 3234.371003] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3234.371223] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3234.371261] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3234.371272] No Local Variables are initialized for Method [_PLD]

[ 3234.371274] No Arguments are initialized for method [_PLD]

[ 3234.371275] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3237.825766] usb 1-1: USB disconnect, device number 55
[ 3238.203366] usb 1-1: new full-speed USB device number 56 using xhci_hcd
[ 3239.583970] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3239.733262] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3239.859970] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3242.027502] Bluetooth: hci1: command 0x1001 tx timeout
[ 3243.531600] usb 1-1: unable to read config index 0 descriptor/all
[ 3243.531608] usb 1-1: can't read configurations, error -110
[ 3243.659285] usb 1-1: new full-speed USB device number 57 using xhci_hcd
[ 3248.907572] usb 1-1: unable to read config index 0 descriptor/all
[ 3248.907581] usb 1-1: can't read configurations, error -110
[ 3248.907704] usb usb1-port1: attempt power cycle
[ 3249.319446] usb 1-1: new full-speed USB device number 58 using xhci_hcd
[ 3250.187288] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3253.522360] usb 1-1: unable to read config index 0 descriptor/all
[ 3253.522369] usb 1-1: can't read configurations, error -71
[ 3253.855273] usb 1-1: new full-speed USB device number 59 using xhci_hcd
[ 3253.877529] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3253.877534] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3253.877535] usb 1-1: Product: ConBee II
[ 3253.877537] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3253.877538] usb 1-1: SerialNumber: DE2227330
[ 3253.877590] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3253.877604] No Local Variables are initialized for Method [_PLD]

[ 3253.877605] No Arguments are initialized for method [_PLD]

[ 3253.877606] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3253.880032] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3253.880045] No Local Variables are initialized for Method [_PLD]

[ 3253.880046] No Arguments are initialized for method [_PLD]

[ 3253.880048] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3253.880288] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3253.880325] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3253.880332] No Local Variables are initialized for Method [_PLD]

[ 3253.880333] No Arguments are initialized for method [_PLD]

[ 3253.880334] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3257.340435] usb 1-1: USB disconnect, device number 59
[ 3257.723231] usb 1-1: new full-speed USB device number 60 using xhci_hcd
[ 3258.315858] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3258.465235] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3258.591869] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3260.779296] Bluetooth: hci1: command 0x1001 tx timeout
[ 3262.987388] usb 1-1: unable to read config index 0 descriptor/all
[ 3262.987397] usb 1-1: can't read configurations, error -110
[ 3263.115363] usb 1-1: new full-speed USB device number 61 using xhci_hcd
[ 3268.363423] usb 1-1: unable to read config index 0 descriptor/all
[ 3268.363431] usb 1-1: can't read configurations, error -110
[ 3268.363549] usb usb1-port1: attempt power cycle
[ 3268.779127] usb 1-1: new full-speed USB device number 62 using xhci_hcd
[ 3268.879125] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3273.042842] usb 1-1: unable to read config index 0 descriptor/all
[ 3273.042851] usb 1-1: can't read configurations, error -71
[ 3273.375304] usb 1-1: new full-speed USB device number 63 using xhci_hcd
[ 3273.400988] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3273.400994] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3273.400995] usb 1-1: Product: ConBee II
[ 3273.400997] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3273.400998] usb 1-1: SerialNumber: DE2227330
[ 3273.401051] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3273.401064] No Local Variables are initialized for Method [_PLD]

[ 3273.401066] No Arguments are initialized for method [_PLD]

[ 3273.401067] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3273.402656] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3273.402667] No Local Variables are initialized for Method [_PLD]

[ 3273.402668] No Arguments are initialized for method [_PLD]

[ 3273.402669] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3273.402865] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3273.402901] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3273.402909] No Local Variables are initialized for Method [_PLD]

[ 3273.402910] No Arguments are initialized for method [_PLD]

[ 3273.402912] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3276.855773] usb 1-1: USB disconnect, device number 63
[ 3277.007700] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3277.156670] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3277.283267] usb 1-1: new full-speed USB device number 64 using xhci_hcd
[ 3277.559771] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3279.723245] Bluetooth: hci1: command 0x1001 tx timeout
[ 3282.443357] usb 1-1: unable to read config index 0 descriptor/all
[ 3282.443366] usb 1-1: can't read configurations, error -110
[ 3282.571225] usb 1-1: new full-speed USB device number 65 using xhci_hcd
[ 3287.819200] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3287.819313] usb 1-1: unable to read config index 0 descriptor/all
[ 3287.819318] usb 1-1: can't read configurations, error -110
[ 3287.819386] usb usb1-port1: attempt power cycle
[ 3288.235203] usb 1-1: new full-speed USB device number 66 using xhci_hcd
[ 3292.563478] usb 1-1: unable to read config index 0 descriptor/all
[ 3292.563488] usb 1-1: can't read configurations, error -71
[ 3292.899173] usb 1-1: new full-speed USB device number 67 using xhci_hcd
[ 3292.921163] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3292.921168] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3292.921170] usb 1-1: Product: ConBee II
[ 3292.921171] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3292.921172] usb 1-1: SerialNumber: DE2227330
[ 3292.921223] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3292.921236] No Local Variables are initialized for Method [_PLD]

[ 3292.921238] No Arguments are initialized for method [_PLD]

[ 3292.921239] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3292.922845] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3292.922856] No Local Variables are initialized for Method [_PLD]

[ 3292.922857] No Arguments are initialized for method [_PLD]

[ 3292.922859] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3292.923090] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3292.923127] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3292.923139] No Local Variables are initialized for Method [_PLD]

[ 3292.923141] No Arguments are initialized for method [_PLD]

[ 3292.923142] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3296.376309] usb 1-1: USB disconnect, device number 67
[ 3296.755147] usb 1-1: new full-speed USB device number 68 using xhci_hcd
[ 3297.947616] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3298.096873] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3298.223620] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3298.383116] Bluetooth: hci1: urb 000000007a719a36 failed to resubmit (2)
[ 3300.395109] Bluetooth: hci1: command 0x1001 tx timeout
[ 3302.155219] usb 1-1: unable to read config index 0 descriptor/all
[ 3302.155228] usb 1-1: can't read configurations, error -110
[ 3302.283104] usb 1-1: new full-speed USB device number 69 using xhci_hcd
[ 3307.531197] usb 1-1: unable to read config index 0 descriptor/all
[ 3307.531206] usb 1-1: can't read configurations, error -110
[ 3307.531280] usb usb1-port1: attempt power cycle
[ 3307.943075] usb 1-1: new full-speed USB device number 70 using xhci_hcd
[ 3308.555080] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3312.087072] usb 1-1: unable to read config index 0 descriptor/all
[ 3312.087083] usb 1-1: can't read configurations, error -71
[ 3312.423046] usb 1-1: new full-speed USB device number 71 using xhci_hcd
[ 3312.445061] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3312.445067] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3312.445068] usb 1-1: Product: ConBee II
[ 3312.445070] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3312.445071] usb 1-1: SerialNumber: DE2227330
[ 3312.445126] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3312.445140] No Local Variables are initialized for Method [_PLD]

[ 3312.445141] No Arguments are initialized for method [_PLD]

[ 3312.445143] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3312.446902] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3312.446913] No Local Variables are initialized for Method [_PLD]

[ 3312.446915] No Arguments are initialized for method [_PLD]

[ 3312.446916] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3312.447150] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3312.447190] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3312.447204] No Local Variables are initialized for Method [_PLD]

[ 3312.447205] No Arguments are initialized for method [_PLD]

[ 3312.447207] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3315.899954] usb 1-1: USB disconnect, device number 71
[ 3316.279025] usb 1-1: new full-speed USB device number 72 using xhci_hcd
[ 3316.683495] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3316.832791] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3316.959432] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3319.147027] Bluetooth: hci1: command 0x1001 tx timeout
[ 3321.611098] usb 1-1: unable to read config index 0 descriptor/all
[ 3321.611108] usb 1-1: can't read configurations, error -110
[ 3321.738985] usb 1-1: new full-speed USB device number 73 using xhci_hcd
[ 3326.987060] usb 1-1: unable to read config index 0 descriptor/all
[ 3326.987069] usb 1-1: can't read configurations, error -110
[ 3326.987189] usb usb1-port1: attempt power cycle
[ 3327.242948] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3327.398967] usb 1-1: new full-speed USB device number 74 using xhci_hcd
[ 3328.263414] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3331.613405] usb 1-1: unable to read config index 0 descriptor/all
[ 3331.613414] usb 1-1: can't read configurations, error -71
[ 3331.946929] usb 1-1: new full-speed USB device number 75 using xhci_hcd
[ 3331.968873] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3331.968879] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3331.968880] usb 1-1: Product: ConBee II
[ 3331.968882] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3331.968883] usb 1-1: SerialNumber: DE2227330
[ 3331.968935] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3331.968948] No Local Variables are initialized for Method [_PLD]

[ 3331.968950] No Arguments are initialized for method [_PLD]

[ 3331.968951] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3331.970578] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3331.970590] No Local Variables are initialized for Method [_PLD]

[ 3331.970592] No Arguments are initialized for method [_PLD]

[ 3331.970593] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3331.970852] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3331.970894] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3331.970903] No Local Variables are initialized for Method [_PLD]

[ 3331.970905] No Arguments are initialized for method [_PLD]

[ 3331.970906] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3333.515330] usb 1-1: reset full-speed USB device number 75 using xhci_hcd
[ 3335.428782] usb 1-1: USB disconnect, device number 75
[ 3335.810894] usb 1-1: new full-speed USB device number 76 using xhci_hcd
[ 3337.371118] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3337.520601] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3337.647372] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3337.807184] Bluetooth: hci1: urb 000000006d7429c8 failed to resubmit (2)
[ 3339.818895] Bluetooth: hci1: command 0x1001 tx timeout
[ 3341.070994] usb 1-1: unable to read config index 0 descriptor/all
[ 3341.071003] usb 1-1: can't read configurations, error -110
[ 3341.198863] usb 1-1: new full-speed USB device number 77 using xhci_hcd
[ 3346.442969] usb 1-1: unable to read config index 0 descriptor/all
[ 3346.442979] usb 1-1: can't read configurations, error -110
[ 3346.443049] usb usb1-port1: attempt power cycle
[ 3346.854829] usb 1-1: new full-speed USB device number 78 using xhci_hcd
[ 3347.978819] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3348.403291] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3348.979306] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3351.145421] usb 1-1: unable to read config index 0 descriptor/all
[ 3351.145430] usb 1-1: can't read configurations, error -71
[ 3351.478696] usb 1-1: new full-speed USB device number 79 using xhci_hcd
[ 3351.500528] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3351.500534] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3351.500535] usb 1-1: Product: ConBee II
[ 3351.500536] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3351.500537] usb 1-1: SerialNumber: DE2227330
[ 3351.500590] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3351.500602] No Local Variables are initialized for Method [_PLD]

[ 3351.500604] No Arguments are initialized for method [_PLD]

[ 3351.500605] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3351.502538] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3351.502554] No Local Variables are initialized for Method [_PLD]

[ 3351.502555] No Arguments are initialized for method [_PLD]

[ 3351.502557] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3351.502814] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3351.502874] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3351.502884] No Local Variables are initialized for Method [_PLD]

[ 3351.502885] No Arguments are initialized for method [_PLD]

[ 3351.502887] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3354.958946] usb 1-1: USB disconnect, device number 79
[ 3355.306599] usb 1-1: new full-speed USB device number 80 using xhci_hcd
[ 3356.107323] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3356.255937] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3356.383272] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3356.542559] Bluetooth: hci1: urb 000000009318527b failed to resubmit (2)
[ 3358.570761] Bluetooth: hci1: command 0x1001 tx timeout
[ 3360.522867] usb 1-1: unable to read config index 0 descriptor/all
[ 3360.522876] usb 1-1: can't read configurations, error -110
[ 3360.650737] usb 1-1: new full-speed USB device number 81 using xhci_hcd
[ 3365.898820] usb 1-1: unable to read config index 0 descriptor/all
[ 3365.898829] usb 1-1: can't read configurations, error -110
[ 3365.898951] usb usb1-port1: attempt power cycle
[ 3366.310713] usb 1-1: new full-speed USB device number 82 using xhci_hcd
[ 3366.666701] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3370.679005] usb 1-1: unable to read config index 0 descriptor/all
[ 3370.679016] usb 1-1: can't read configurations, error -71
[ 3371.014494] usb 1-1: new full-speed USB device number 83 using xhci_hcd
[ 3371.035987] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3371.035992] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3371.035993] usb 1-1: Product: ConBee II
[ 3371.035995] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3371.035996] usb 1-1: SerialNumber: DE2227330
[ 3371.036057] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3371.036072] No Local Variables are initialized for Method [_PLD]

[ 3371.036074] No Arguments are initialized for method [_PLD]

[ 3371.036076] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3371.043172] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3371.043188] No Local Variables are initialized for Method [_PLD]

[ 3371.043190] No Arguments are initialized for method [_PLD]

[ 3371.043192] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3371.043415] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3371.043449] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3371.043459] No Local Variables are initialized for Method [_PLD]

[ 3371.043460] No Arguments are initialized for method [_PLD]

[ 3371.043462] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3374.493165] usb 1-1: USB disconnect, device number 83
[ 3374.795061] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3374.944234] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3375.070652] usb 1-1: new full-speed USB device number 84 using xhci_hcd
[ 3375.347133] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3377.514631] Bluetooth: hci1: command 0x1001 tx timeout
[ 3380.234732] usb 1-1: unable to read config index 0 descriptor/all
[ 3380.234742] usb 1-1: can't read configurations, error -110
[ 3380.362575] usb 1-1: new full-speed USB device number 85 using xhci_hcd
[ 3385.610593] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3385.612070] usb 1-1: unable to read config index 0 descriptor/all
[ 3385.612081] usb 1-1: can't read configurations, error -110
[ 3385.614293] usb usb1-port1: attempt power cycle
[ 3386.026599] usb 1-1: new full-speed USB device number 86 using xhci_hcd
[ 3390.216007] usb 1-1: unable to read config index 0 descriptor/all
[ 3390.216018] usb 1-1: can't read configurations, error -71
[ 3390.550567] usb 1-1: new full-speed USB device number 87 using xhci_hcd
[ 3390.572530] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3390.572535] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3390.572537] usb 1-1: Product: ConBee II
[ 3390.572538] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3390.572539] usb 1-1: SerialNumber: DE2227330
[ 3390.572593] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3390.572608] No Local Variables are initialized for Method [_PLD]

[ 3390.572609] No Arguments are initialized for method [_PLD]

[ 3390.572611] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3390.574374] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3390.574392] No Local Variables are initialized for Method [_PLD]

[ 3390.574393] No Arguments are initialized for method [_PLD]

[ 3390.574395] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3390.574633] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3390.574673] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3390.574682] No Local Variables are initialized for Method [_PLD]

[ 3390.574684] No Arguments are initialized for method [_PLD]

[ 3390.574685] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3394.029550] usb 1-1: USB disconnect, device number 87
[ 3394.406541] usb 1-1: new full-speed USB device number 88 using xhci_hcd
[ 3395.742535] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3395.891138] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3396.022541] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3398.186527] Bluetooth: hci1: command 0x1001 tx timeout
[ 3399.690619] usb 1-1: unable to read config index 0 descriptor/all
[ 3399.690629] usb 1-1: can't read configurations, error -110
[ 3399.818503] usb 1-1: new full-speed USB device number 89 using xhci_hcd
[ 3405.066575] usb 1-1: unable to read config index 0 descriptor/all
[ 3405.066584] usb 1-1: can't read configurations, error -110
[ 3405.066650] usb usb1-port1: attempt power cycle
[ 3405.478457] usb 1-1: new full-speed USB device number 90 using xhci_hcd
[ 3406.346485] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3409.755128] usb 1-1: unable to read config index 0 descriptor/all
[ 3409.755137] usb 1-1: can't read configurations, error -71
[ 3410.090449] usb 1-1: new full-speed USB device number 91 using xhci_hcd
[ 3410.112163] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3410.112168] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3410.112170] usb 1-1: Product: ConBee II
[ 3410.112171] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3410.112172] usb 1-1: SerialNumber: DE2227330
[ 3410.112224] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3410.112236] No Local Variables are initialized for Method [_PLD]

[ 3410.112238] No Arguments are initialized for method [_PLD]

[ 3410.112239] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3410.113870] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3410.113882] No Local Variables are initialized for Method [_PLD]

[ 3410.113883] No Arguments are initialized for method [_PLD]

[ 3410.113885] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3410.114112] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3410.114142] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3410.114149] No Local Variables are initialized for Method [_PLD]

[ 3410.114150] No Arguments are initialized for method [_PLD]

[ 3410.114152] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3413.568838] usb 1-1: USB disconnect, device number 91
[ 3413.950422] usb 1-1: new full-speed USB device number 92 using xhci_hcd
[ 3414.474911] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3414.624169] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3414.750896] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3414.910298] Bluetooth: hci1: urb 0000000019fb4bde failed to resubmit (2)
[ 3416.938396] Bluetooth: hci1: command 0x1001 tx timeout
[ 3419.146502] usb 1-1: unable to read config index 0 descriptor/all
[ 3419.146511] usb 1-1: can't read configurations, error -110
[ 3419.274380] usb 1-1: new full-speed USB device number 93 using xhci_hcd
[ 3424.522440] usb 1-1: unable to read config index 0 descriptor/all
[ 3424.522450] usb 1-1: can't read configurations, error -110
[ 3424.522570] usb usb1-port1: attempt power cycle
[ 3424.934192] usb 1-1: new full-speed USB device number 94 using xhci_hcd
[ 3425.034290] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3429.295636] usb 1-1: unable to read config index 0 descriptor/all
[ 3429.295646] usb 1-1: can't read configurations, error -71
[ 3429.630325] usb 1-1: new full-speed USB device number 95 using xhci_hcd
[ 3429.652162] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3429.652168] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3429.652169] usb 1-1: Product: ConBee II
[ 3429.652171] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3429.652172] usb 1-1: SerialNumber: DE2227330
[ 3429.652225] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3429.652238] No Local Variables are initialized for Method [_PLD]

[ 3429.652240] No Arguments are initialized for method [_PLD]

[ 3429.652242] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3429.653851] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3429.653863] No Local Variables are initialized for Method [_PLD]

[ 3429.653865] No Arguments are initialized for method [_PLD]

[ 3429.653867] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3429.654069] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3429.654100] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3429.654108] No Local Variables are initialized for Method [_PLD]

[ 3429.654109] No Arguments are initialized for method [_PLD]

[ 3429.654111] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3433.107226] usb 1-1: USB disconnect, device number 95
[ 3433.486294] usb 1-1: new full-speed USB device number 96 using xhci_hcd
[ 3435.162750] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3435.312004] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3435.438785] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3437.610256] Bluetooth: hci1: command 0x1001 tx timeout
[ 3438.858370] usb 1-1: unable to read config index 0 descriptor/all
[ 3438.858380] usb 1-1: can't read configurations, error -110
[ 3438.986264] usb 1-1: new full-speed USB device number 97 using xhci_hcd
[ 3444.234346] usb 1-1: unable to read config index 0 descriptor/all
[ 3444.234355] usb 1-1: can't read configurations, error -110
[ 3444.234476] usb usb1-port1: attempt power cycle
[ 3444.646218] usb 1-1: new full-speed USB device number 98 using xhci_hcd
[ 3445.770218] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3448.835631] usb 1-1: unable to read config index 0 descriptor/all
[ 3448.835641] usb 1-1: can't read configurations, error -71
[ 3449.170207] usb 1-1: new full-speed USB device number 99 using xhci_hcd
[ 3449.191872] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3449.191878] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3449.191879] usb 1-1: Product: ConBee II
[ 3449.191880] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3449.191881] usb 1-1: SerialNumber: DE2227330
[ 3449.191932] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3449.191946] No Local Variables are initialized for Method [_PLD]

[ 3449.191947] No Arguments are initialized for method [_PLD]

[ 3449.191949] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3449.193544] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3449.193554] No Local Variables are initialized for Method [_PLD]

[ 3449.193555] No Arguments are initialized for method [_PLD]

[ 3449.193557] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3449.193765] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3449.193800] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3449.193808] No Local Variables are initialized for Method [_PLD]

[ 3449.193810] No Arguments are initialized for method [_PLD]

[ 3449.193811] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3452.647544] usb 1-1: USB disconnect, device number 99
[ 3452.994171] usb 1-1: new full-speed USB device number 100 using xhci_hcd
[ 3453.898640] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3454.047673] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3454.174629] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3454.333889] Bluetooth: hci1: urb 00000000ff1773e9 failed to resubmit (2)
[ 3456.362136] Bluetooth: hci1: command 0x1001 tx timeout
[ 3458.314239] usb 1-1: unable to read config index 0 descriptor/all
[ 3458.314248] usb 1-1: can't read configurations, error -110
[ 3458.442135] usb 1-1: new full-speed USB device number 101 using xhci_hcd
[ 3463.690235] usb 1-1: unable to read config index 0 descriptor/all
[ 3463.690244] usb 1-1: can't read configurations, error -110
[ 3463.690359] usb usb1-port1: attempt power cycle
[ 3464.102089] usb 1-1: new full-speed USB device number 102 using xhci_hcd
[ 3464.458091] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3465.482549] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3468.378617] usb 1-1: unable to read config index 0 descriptor/all
[ 3468.378626] usb 1-1: can't read configurations, error -71
[ 3468.714076] usb 1-1: new full-speed USB device number 103 using xhci_hcd
[ 3468.735601] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3468.735606] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3468.735608] usb 1-1: Product: ConBee II
[ 3468.735609] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3468.735610] usb 1-1: SerialNumber: DE2227330
[ 3468.735660] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3468.735673] No Local Variables are initialized for Method [_PLD]

[ 3468.735674] No Arguments are initialized for method [_PLD]

[ 3468.735676] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3468.742087] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3468.742102] No Local Variables are initialized for Method [_PLD]

[ 3468.742103] No Arguments are initialized for method [_PLD]

[ 3468.742105] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3468.742352] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3468.742383] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3468.742391] No Local Variables are initialized for Method [_PLD]

[ 3468.742392] No Arguments are initialized for method [_PLD]

[ 3468.742393] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3470.730344] usb 1-1: reset full-speed USB device number 103 using xhci_hcd
[ 3472.191107] usb 1-1: USB disconnect, device number 103
[ 3472.545853] usb 1-1: new full-speed USB device number 104 using xhci_hcd
[ 3472.822527] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3472.971809] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3473.098520] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3473.257955] Bluetooth: hci1: urb 000000002957d1b2 failed to resubmit (2)
[ 3475.274023] Bluetooth: hci1: command 0x1001 tx timeout
[ 3477.770133] usb 1-1: unable to read config index 0 descriptor/all
[ 3477.770143] usb 1-1: can't read configurations, error -110
[ 3477.898013] usb 1-1: new full-speed USB device number 105 using xhci_hcd
[ 3483.146076] usb 1-1: unable to read config index 0 descriptor/all
[ 3483.146085] usb 1-1: can't read configurations, error -110
[ 3483.146209] usb usb1-port1: attempt power cycle
[ 3483.401967] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3483.557840] usb 1-1: new full-speed USB device number 106 using xhci_hcd
[ 3483.830070] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3484.402469] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3487.923842] usb 1-1: unable to read config index 0 descriptor/all
[ 3487.923852] usb 1-1: can't read configurations, error -71
[ 3488.257954] usb 1-1: new full-speed USB device number 107 using xhci_hcd
[ 3488.279948] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3488.279953] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3488.279955] usb 1-1: Product: ConBee II
[ 3488.279956] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3488.279957] usb 1-1: SerialNumber: DE2227330
[ 3488.280009] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3488.280023] No Local Variables are initialized for Method [_PLD]

[ 3488.280024] No Arguments are initialized for method [_PLD]

[ 3488.280026] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3488.281613] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3488.281623] No Local Variables are initialized for Method [_PLD]

[ 3488.281625] No Arguments are initialized for method [_PLD]

[ 3488.281627] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3488.281865] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3488.281910] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3488.281919] No Local Variables are initialized for Method [_PLD]

[ 3488.281920] No Arguments are initialized for method [_PLD]

[ 3488.281922] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3491.735096] usb 1-1: USB disconnect, device number 107
[ 3492.117802] usb 1-1: new full-speed USB device number 108 using xhci_hcd
[ 3493.530394] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3493.679618] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 3493.806314] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 3495.977929] Bluetooth: hci1: command 0x1001 tx timeout
[ 3497.481800] usb 1-1: unable to read config index 0 descriptor/all
[ 3497.481811] usb 1-1: can't read configurations, error -110
[ 3497.617695] usb 1-1: new full-speed USB device number 109 using xhci_hcd
[ 3502.857956] usb 1-1: unable to read config index 0 descriptor/all
[ 3502.857965] usb 1-1: can't read configurations, error -110
[ 3502.858096] usb usb1-port1: attempt power cycle
[ 3503.269857] usb 1-1: new full-speed USB device number 110 using xhci_hcd
[ 3504.137881] Bluetooth: hci1: CSR: Local version failed (-110)
[ 3507.469702] usb 1-1: unable to read config index 0 descriptor/all
[ 3507.469712] usb 1-1: can't read configurations, error -71
[ 3507.805870] usb 1-1: new full-speed USB device number 111 using xhci_hcd
[ 3507.831761] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3507.831767] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3507.831768] usb 1-1: Product: ConBee II
[ 3507.831769] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3507.831770] usb 1-1: SerialNumber: DE2227330
[ 3507.831825] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3507.831839] No Local Variables are initialized for Method [_PLD]

[ 3507.831840] No Arguments are initialized for method [_PLD]

[ 3507.831842] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3507.833477] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3507.833491] No Local Variables are initialized for Method [_PLD]

[ 3507.833493] No Arguments are initialized for method [_PLD]

[ 3507.833495] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3507.833749] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3507.833793] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3507.833801] No Local Variables are initialized for Method [_PLD]

[ 3507.833803] No Arguments are initialized for method [_PLD]

[ 3507.833804] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3511.282250] usb 1-1: USB disconnect, device number 111
[ 3511.669816] usb 1-1: new full-speed USB device number 112 using xhci_hcd
[ 3511.819432] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 3511.819437] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3511.819439] usb 1-1: Product: ConBee II
[ 3511.819440] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3511.819441] usb 1-1: SerialNumber: DE2227330
[ 3511.819491] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3511.819504] No Local Variables are initialized for Method [_PLD]

[ 3511.819505] No Arguments are initialized for method [_PLD]

[ 3511.819507] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3511.821168] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3511.821177] No Local Variables are initialized for Method [_PLD]

[ 3511.821178] No Arguments are initialized for method [_PLD]

[ 3511.821180] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3511.821413] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 3511.821445] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 3511.821452] No Local Variables are initialized for Method [_PLD]

[ 3511.821453] No Arguments are initialized for method [_PLD]

[ 3511.821454] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 3557.709982] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 3728.282655] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 4068.047487] usb 1-1: USB disconnect, device number 112
[ 4068.358340] usb 1-1: new full-speed USB device number 113 using xhci_hcd
[ 4068.507950] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4068.507956] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4068.507957] usb 1-1: Product: ConBee II
[ 4068.507958] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4068.507959] usb 1-1: SerialNumber: DE2227330
[ 4068.508010] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4068.508022] No Local Variables are initialized for Method [_PLD]

[ 4068.508024] No Arguments are initialized for method [_PLD]

[ 4068.508025] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4068.509664] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4068.509673] No Local Variables are initialized for Method [_PLD]

[ 4068.509675] No Arguments are initialized for method [_PLD]

[ 4068.509676] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4068.509889] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4068.509923] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4068.509931] No Local Variables are initialized for Method [_PLD]

[ 4068.509933] No Arguments are initialized for method [_PLD]

[ 4068.509934] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4071.883349] usb 1-1: USB disconnect, device number 113
[ 4072.262374] usb 1-1: new full-speed USB device number 114 using xhci_hcd
[ 4073.090556] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4073.240066] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4073.366794] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4075.526326] Bluetooth: hci1: command 0x1001 tx timeout
[ 4077.578139] usb 1-1: unable to read config index 0 descriptor/all
[ 4077.578150] usb 1-1: can't read configurations, error -110
[ 4077.706070] usb 1-1: new full-speed USB device number 115 using xhci_hcd
[ 4082.950360] usb 1-1: unable to read config index 0 descriptor/all
[ 4082.950369] usb 1-1: can't read configurations, error -110
[ 4082.950489] usb usb1-port1: attempt power cycle
[ 4083.362229] usb 1-1: new full-speed USB device number 116 using xhci_hcd
[ 4083.718229] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4084.138349] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4084.718655] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4087.504715] usb 1-1: unable to read config index 0 descriptor/all
[ 4087.504725] usb 1-1: can't read configurations, error -71
[ 4087.838216] usb 1-1: new full-speed USB device number 117 using xhci_hcd
[ 4087.859761] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4087.859767] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4087.859768] usb 1-1: Product: ConBee II
[ 4087.859769] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4087.859770] usb 1-1: SerialNumber: DE2227330
[ 4087.859827] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4087.859840] No Local Variables are initialized for Method [_PLD]

[ 4087.859841] No Arguments are initialized for method [_PLD]

[ 4087.859843] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4087.866200] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4087.866215] No Local Variables are initialized for Method [_PLD]

[ 4087.866217] No Arguments are initialized for method [_PLD]

[ 4087.866219] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4087.866467] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4087.866498] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4087.866506] No Local Variables are initialized for Method [_PLD]

[ 4087.866507] No Arguments are initialized for method [_PLD]

[ 4087.866509] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4091.333961] usb 1-1: USB disconnect, device number 117
[ 4091.718178] usb 1-1: new full-speed USB device number 118 using xhci_hcd
[ 4091.994649] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4092.143959] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4092.270653] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4094.438147] Bluetooth: hci1: command 0x1001 tx timeout
[ 4097.030277] usb 1-1: unable to read config index 0 descriptor/all
[ 4097.030286] usb 1-1: can't read configurations, error -110
[ 4097.158147] usb 1-1: new full-speed USB device number 119 using xhci_hcd
[ 4102.409983] usb 1-1: unable to read config index 0 descriptor/all
[ 4102.409994] usb 1-1: can't read configurations, error -110
[ 4102.410056] usb usb1-port1: attempt power cycle
[ 4102.661916] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4102.825938] usb 1-1: new full-speed USB device number 120 using xhci_hcd
[ 4106.968309] usb 1-1: unable to read config index 0 descriptor/all
[ 4106.968319] usb 1-1: can't read configurations, error -71
[ 4107.310089] usb 1-1: new full-speed USB device number 121 using xhci_hcd
[ 4107.332061] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4107.332066] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4107.332068] usb 1-1: Product: ConBee II
[ 4107.332069] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4107.332070] usb 1-1: SerialNumber: DE2227330
[ 4107.332123] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4107.332136] No Local Variables are initialized for Method [_PLD]

[ 4107.332138] No Arguments are initialized for method [_PLD]

[ 4107.332139] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4107.333730] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4107.333741] No Local Variables are initialized for Method [_PLD]

[ 4107.333742] No Arguments are initialized for method [_PLD]

[ 4107.333744] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4107.334674] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4107.334718] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4107.334727] No Local Variables are initialized for Method [_PLD]

[ 4107.334729] No Arguments are initialized for method [_PLD]

[ 4107.334730] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4110.795777] usb 1-1: USB disconnect, device number 121
[ 4111.146062] usb 1-1: new full-speed USB device number 122 using xhci_hcd
[ 4112.794458] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4112.943624] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4113.070450] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4115.238035] Bluetooth: hci1: command 0x1001 tx timeout
[ 4116.486157] usb 1-1: unable to read config index 0 descriptor/all
[ 4116.486167] usb 1-1: can't read configurations, error -110
[ 4116.614013] usb 1-1: new full-speed USB device number 123 using xhci_hcd
[ 4121.862151] usb 1-1: unable to read config index 0 descriptor/all
[ 4121.862160] usb 1-1: can't read configurations, error -110
[ 4121.862233] usb usb1-port1: attempt power cycle
[ 4122.273979] usb 1-1: new full-speed USB device number 124 using xhci_hcd
[ 4123.398003] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4126.438324] usb 1-1: unable to read config index 0 descriptor/all
[ 4126.438333] usb 1-1: can't read configurations, error -71
[ 4126.773978] usb 1-1: new full-speed USB device number 125 using xhci_hcd
[ 4126.795679] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4126.795691] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4126.795692] usb 1-1: Product: ConBee II
[ 4126.795693] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4126.795694] usb 1-1: SerialNumber: DE2227330
[ 4126.795745] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4126.795758] No Local Variables are initialized for Method [_PLD]

[ 4126.795759] No Arguments are initialized for method [_PLD]

[ 4126.795760] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4126.797419] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4126.797431] No Local Variables are initialized for Method [_PLD]

[ 4126.797432] No Arguments are initialized for method [_PLD]

[ 4126.797434] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4126.797640] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4126.797670] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4126.797677] No Local Variables are initialized for Method [_PLD]

[ 4126.797679] No Arguments are initialized for method [_PLD]

[ 4126.797680] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4130.266309] usb 1-1: USB disconnect, device number 125
[ 4130.653953] usb 1-1: new full-speed USB device number 126 using xhci_hcd
[ 4131.526195] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4131.675633] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4131.802376] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4131.961527] Bluetooth: hci1: urb 00000000ce9a8f5c failed to resubmit (2)
[ 4133.989899] Bluetooth: hci1: command 0x1001 tx timeout
[ 4135.942015] usb 1-1: unable to read config index 0 descriptor/all
[ 4135.942025] usb 1-1: can't read configurations, error -110
[ 4136.069897] usb 1-1: new full-speed USB device number 127 using xhci_hcd
[ 4141.317971] usb 1-1: unable to read config index 0 descriptor/all
[ 4141.317980] usb 1-1: can't read configurations, error -110
[ 4141.318105] usb usb1-port1: attempt power cycle
[ 4141.729860] usb 1-1: new full-speed USB device number 4 using xhci_hcd
[ 4142.085851] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4145.916208] usb 1-1: unable to read config index 0 descriptor/all
[ 4145.916218] usb 1-1: can't read configurations, error -71
[ 4146.249690] usb 1-1: new full-speed USB device number 6 using xhci_hcd
[ 4146.271762] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4146.271767] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4146.271769] usb 1-1: Product: ConBee II
[ 4146.271770] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4146.271771] usb 1-1: SerialNumber: DE2227330
[ 4146.271824] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4146.271838] No Local Variables are initialized for Method [_PLD]

[ 4146.271839] No Arguments are initialized for method [_PLD]

[ 4146.271841] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4146.273398] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4146.273411] No Local Variables are initialized for Method [_PLD]

[ 4146.273412] No Arguments are initialized for method [_PLD]

[ 4146.273414] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4146.273610] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4146.273649] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4146.273662] No Local Variables are initialized for Method [_PLD]

[ 4146.273663] No Arguments are initialized for method [_PLD]

[ 4146.273665] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4149.741114] usb 1-1: USB disconnect, device number 6
[ 4150.101829] usb 1-1: new full-speed USB device number 7 using xhci_hcd
[ 4150.378282] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4150.527377] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4150.654278] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4150.813329] Bluetooth: hci1: urb 00000000fc4c85e2 failed to resubmit (2)
[ 4152.837806] Bluetooth: hci1: command 0x1001 tx timeout
[ 4155.397874] usb 1-1: unable to read config index 0 descriptor/all
[ 4155.397884] usb 1-1: can't read configurations, error -110
[ 4155.525775] usb 1-1: new full-speed USB device number 8 using xhci_hcd
[ 4160.773847] usb 1-1: unable to read config index 0 descriptor/all
[ 4160.773856] usb 1-1: can't read configurations, error -110
[ 4160.773923] usb usb1-port1: attempt power cycle
[ 4161.029762] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4161.185758] usb 1-1: new full-speed USB device number 9 using xhci_hcd
[ 4165.397127] usb 1-1: unable to read config index 0 descriptor/all
[ 4165.397139] usb 1-1: can't read configurations, error -71
[ 4165.733605] usb 1-1: new full-speed USB device number 10 using xhci_hcd
[ 4165.755455] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4165.755460] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4165.755462] usb 1-1: Product: ConBee II
[ 4165.755463] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4165.755464] usb 1-1: SerialNumber: DE2227330
[ 4165.755517] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4165.755530] No Local Variables are initialized for Method [_PLD]

[ 4165.755531] No Arguments are initialized for method [_PLD]

[ 4165.755533] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4165.757241] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4165.757252] No Local Variables are initialized for Method [_PLD]

[ 4165.757253] No Arguments are initialized for method [_PLD]

[ 4165.757254] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4165.757475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4165.757508] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4165.757523] No Local Variables are initialized for Method [_PLD]

[ 4165.757525] No Arguments are initialized for method [_PLD]

[ 4165.757529] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4169.220606] usb 1-1: USB disconnect, device number 10
[ 4169.605714] usb 1-1: new full-speed USB device number 11 using xhci_hcd
[ 4171.158100] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4171.307457] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4171.434169] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4173.605653] Bluetooth: hci1: command 0x1001 tx timeout
[ 4174.853780] usb 1-1: unable to read config index 0 descriptor/all
[ 4174.853790] usb 1-1: can't read configurations, error -110
[ 4174.981651] usb 1-1: new full-speed USB device number 12 using xhci_hcd
[ 4180.229764] usb 1-1: unable to read config index 0 descriptor/all
[ 4180.229773] usb 1-1: can't read configurations, error -110
[ 4180.229896] usb usb1-port1: attempt power cycle
[ 4180.641618] usb 1-1: new full-speed USB device number 13 using xhci_hcd
[ 4181.765533] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4184.881385] usb 1-1: unable to read config index 0 descriptor/all
[ 4184.881400] usb 1-1: can't read configurations, error -71
[ 4185.217619] usb 1-1: new full-speed USB device number 14 using xhci_hcd
[ 4185.239378] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4185.239384] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4185.239385] usb 1-1: Product: ConBee II
[ 4185.239387] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4185.239388] usb 1-1: SerialNumber: DE2227330
[ 4185.239441] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4185.239455] No Local Variables are initialized for Method [_PLD]

[ 4185.239456] No Arguments are initialized for method [_PLD]

[ 4185.239458] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4185.245800] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4185.245815] No Local Variables are initialized for Method [_PLD]

[ 4185.245816] No Arguments are initialized for method [_PLD]

[ 4185.245818] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4185.246068] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4185.246100] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4185.246108] No Local Variables are initialized for Method [_PLD]

[ 4185.246109] No Arguments are initialized for method [_PLD]

[ 4185.246111] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4188.705955] usb 1-1: USB disconnect, device number 14
[ 4189.085579] usb 1-1: new full-speed USB device number 15 using xhci_hcd
[ 4189.894053] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4190.043324] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4190.170052] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4192.357578] Bluetooth: hci1: command 0x1001 tx timeout
[ 4194.309637] usb 1-1: unable to read config index 0 descriptor/all
[ 4194.309647] usb 1-1: can't read configurations, error -110
[ 4194.437537] usb 1-1: new full-speed USB device number 16 using xhci_hcd
[ 4199.685636] usb 1-1: unable to read config index 0 descriptor/all
[ 4199.685645] usb 1-1: can't read configurations, error -110
[ 4199.685760] usb usb1-port1: attempt power cycle
[ 4200.097330] usb 1-1: new full-speed USB device number 17 using xhci_hcd
[ 4200.453520] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4201.481963] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4204.371283] usb 1-1: unable to read config index 0 descriptor/all
[ 4204.371294] usb 1-1: can't read configurations, error -71
[ 4204.705301] usb 1-1: new full-speed USB device number 18 using xhci_hcd
[ 4204.730958] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4204.730966] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4204.730968] usb 1-1: Product: ConBee II
[ 4204.730969] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4204.730971] usb 1-1: SerialNumber: DE2227330
[ 4204.731042] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4204.731061] No Local Variables are initialized for Method [_PLD]

[ 4204.731063] No Arguments are initialized for method [_PLD]

[ 4204.731066] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4204.732801] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4204.732824] No Local Variables are initialized for Method [_PLD]

[ 4204.732826] No Arguments are initialized for method [_PLD]

[ 4204.732828] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4204.733155] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4204.733215] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4204.733227] No Local Variables are initialized for Method [_PLD]

[ 4204.733228] No Arguments are initialized for method [_PLD]

[ 4204.733230] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4206.725543] usb 1-1: reset full-speed USB device number 18 using xhci_hcd
[ 4208.191381] usb 1-1: USB disconnect, device number 18
[ 4208.541463] usb 1-1: new full-speed USB device number 19 using xhci_hcd
[ 4208.817931] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4208.967224] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4209.093898] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4209.253359] Bluetooth: hci1: urb 000000005541ea7e failed to resubmit (2)
[ 4211.269450] Bluetooth: hci1: command 0x1001 tx timeout
[ 4213.765555] usb 1-1: unable to read config index 0 descriptor/all
[ 4213.765565] usb 1-1: can't read configurations, error -110
[ 4213.893418] usb 1-1: new full-speed USB device number 20 using xhci_hcd
[ 4219.141520] usb 1-1: unable to read config index 0 descriptor/all
[ 4219.141530] usb 1-1: can't read configurations, error -110
[ 4219.141600] usb usb1-port1: attempt power cycle
[ 4219.397380] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4219.561224] usb 1-1: new full-speed USB device number 21 using xhci_hcd
[ 4219.837456] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4220.433838] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4223.862083] usb 1-1: unable to read config index 0 descriptor/all
[ 4223.862095] usb 1-1: can't read configurations, error -71
[ 4224.197198] usb 1-1: new full-speed USB device number 22 using xhci_hcd
[ 4224.218808] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4224.218816] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4224.218818] usb 1-1: Product: ConBee II
[ 4224.218819] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4224.218821] usb 1-1: SerialNumber: DE2227330
[ 4224.218891] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4224.218909] No Local Variables are initialized for Method [_PLD]

[ 4224.218911] No Arguments are initialized for method [_PLD]

[ 4224.218913] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4224.220650] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4224.220668] No Local Variables are initialized for Method [_PLD]

[ 4224.220670] No Arguments are initialized for method [_PLD]

[ 4224.220672] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4224.220921] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4224.220968] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4224.220979] No Local Variables are initialized for Method [_PLD]

[ 4224.220980] No Arguments are initialized for method [_PLD]

[ 4224.220982] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4227.681251] usb 1-1: USB disconnect, device number 22
[ 4228.061171] usb 1-1: new full-speed USB device number 23 using xhci_hcd
[ 4229.525328] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4229.677960] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4229.805332] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4231.973324] Bluetooth: hci1: command 0x1001 tx timeout
[ 4233.221385] usb 1-1: unable to read config index 0 descriptor/all
[ 4233.221395] usb 1-1: can't read configurations, error -110
[ 4233.349301] usb 1-1: new full-speed USB device number 25 using xhci_hcd
[ 4238.597380] usb 1-1: unable to read config index 0 descriptor/all
[ 4238.597388] usb 1-1: can't read configurations, error -110
[ 4238.597502] usb usb1-port1: attempt power cycle
[ 4239.009255] usb 1-1: new full-speed USB device number 26 using xhci_hcd
[ 4240.133138] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4243.355933] usb 1-1: unable to read config index 0 descriptor/all
[ 4243.355943] usb 1-1: can't read configurations, error -71
[ 4243.689084] usb 1-1: new full-speed USB device number 27 using xhci_hcd
[ 4243.710763] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4243.710769] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4243.710771] usb 1-1: Product: ConBee II
[ 4243.710776] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4243.710777] usb 1-1: SerialNumber: DE2227330
[ 4243.710841] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4243.710858] No Local Variables are initialized for Method [_PLD]

[ 4243.710859] No Arguments are initialized for method [_PLD]

[ 4243.710867] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4243.712812] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4243.712832] No Local Variables are initialized for Method [_PLD]

[ 4243.712833] No Arguments are initialized for method [_PLD]

[ 4243.712835] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4243.713086] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4243.713148] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4243.713158] No Local Variables are initialized for Method [_PLD]

[ 4243.713160] No Arguments are initialized for method [_PLD]

[ 4243.713162] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4247.174863] usb 1-1: USB disconnect, device number 27
[ 4247.553058] usb 1-1: new full-speed USB device number 28 using xhci_hcd
[ 4248.261267] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4248.410960] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4248.537675] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4250.725186] Bluetooth: hci1: command 0x1001 tx timeout
[ 4252.933268] usb 1-1: unable to read config index 0 descriptor/all
[ 4252.933278] usb 1-1: can't read configurations, error -110
[ 4253.061159] usb 1-1: new full-speed USB device number 29 using xhci_hcd
[ 4258.309228] usb 1-1: unable to read config index 0 descriptor/all
[ 4258.309238] usb 1-1: can't read configurations, error -110
[ 4258.309353] usb usb1-port1: attempt power cycle
[ 4258.721127] usb 1-1: new full-speed USB device number 30 using xhci_hcd
[ 4258.821131] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4262.853214] usb 1-1: unable to read config index 0 descriptor/all
[ 4262.853223] usb 1-1: can't read configurations, error -71
[ 4263.188931] usb 1-1: new full-speed USB device number 31 using xhci_hcd
[ 4263.214438] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4263.214444] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4263.214446] usb 1-1: Product: ConBee II
[ 4263.214448] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4263.214449] usb 1-1: SerialNumber: DE2227330
[ 4263.214512] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4263.214529] No Local Variables are initialized for Method [_PLD]

[ 4263.214531] No Arguments are initialized for method [_PLD]

[ 4263.214533] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4263.216335] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4263.216356] No Local Variables are initialized for Method [_PLD]

[ 4263.216358] No Arguments are initialized for method [_PLD]

[ 4263.216360] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4263.216603] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4263.216648] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4263.216659] No Local Variables are initialized for Method [_PLD]

[ 4263.216660] No Arguments are initialized for method [_PLD]

[ 4263.216662] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4266.674109] usb 1-1: USB disconnect, device number 31
[ 4266.949501] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4267.098369] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4267.225073] usb 1-1: new full-speed USB device number 32 using xhci_hcd
[ 4267.501573] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4267.660939] Bluetooth: hci1: urb 00000000575cbe10 failed to resubmit (2)
[ 4269.669077] Bluetooth: hci1: command 0x1001 tx timeout
[ 4272.389045] usb 1-1: unable to read config index 0 descriptor/all
[ 4272.389054] usb 1-1: can't read configurations, error -110
[ 4272.517033] usb 1-1: new full-speed USB device number 33 using xhci_hcd
[ 4277.765014] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4277.765173] usb 1-1: unable to read config index 0 descriptor/all
[ 4277.765178] usb 1-1: can't read configurations, error -110
[ 4277.768858] usb usb1-port1: attempt power cycle
[ 4278.184847] usb 1-1: new full-speed USB device number 34 using xhci_hcd
[ 4282.354631] usb 1-1: unable to read config index 0 descriptor/all
[ 4282.354641] usb 1-1: can't read configurations, error -71
[ 4282.688994] usb 1-1: new full-speed USB device number 35 using xhci_hcd
[ 4282.714685] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4282.714691] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4282.714692] usb 1-1: Product: ConBee II
[ 4282.714694] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4282.714695] usb 1-1: SerialNumber: DE2227330
[ 4282.714747] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4282.714760] No Local Variables are initialized for Method [_PLD]

[ 4282.714761] No Arguments are initialized for method [_PLD]

[ 4282.714763] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4282.721176] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4282.721191] No Local Variables are initialized for Method [_PLD]

[ 4282.721192] No Arguments are initialized for method [_PLD]

[ 4282.721194] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4282.721410] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4282.721441] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4282.721449] No Local Variables are initialized for Method [_PLD]

[ 4282.721450] No Arguments are initialized for method [_PLD]

[ 4282.721452] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4286.172689] usb 1-1: USB disconnect, device number 35
[ 4286.528773] usb 1-1: new full-speed USB device number 36 using xhci_hcd
[ 4287.893364] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4288.042698] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4288.169464] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4288.328482] Bluetooth: hci1: urb 0000000030c26ad3 failed to resubmit (2)
[ 4290.340946] Bluetooth: hci1: command 0x1001 tx timeout
[ 4291.845026] usb 1-1: unable to read config index 0 descriptor/all
[ 4291.845036] usb 1-1: can't read configurations, error -110
[ 4291.972908] usb 1-1: new full-speed USB device number 37 using xhci_hcd
[ 4297.220815] usb 1-1: unable to read config index 0 descriptor/all
[ 4297.220824] usb 1-1: can't read configurations, error -110
[ 4297.220936] usb usb1-port1: attempt power cycle
[ 4297.632896] usb 1-1: new full-speed USB device number 38 using xhci_hcd
[ 4298.500879] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4301.858122] usb 1-1: unable to read config index 0 descriptor/all
[ 4301.858132] usb 1-1: can't read configurations, error -71
[ 4302.192863] usb 1-1: new full-speed USB device number 39 using xhci_hcd
[ 4302.214550] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4302.214556] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4302.214557] usb 1-1: Product: ConBee II
[ 4302.214558] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4302.214559] usb 1-1: SerialNumber: DE2227330
[ 4302.214613] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4302.214626] No Local Variables are initialized for Method [_PLD]

[ 4302.214627] No Arguments are initialized for method [_PLD]

[ 4302.214629] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4302.221158] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4302.221175] No Local Variables are initialized for Method [_PLD]

[ 4302.221176] No Arguments are initialized for method [_PLD]

[ 4302.221178] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4302.221422] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4302.221454] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4302.221462] No Local Variables are initialized for Method [_PLD]

[ 4302.221463] No Arguments are initialized for method [_PLD]

[ 4302.221465] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4305.678116] usb 1-1: USB disconnect, device number 39
[ 4306.036636] usb 1-1: new full-speed USB device number 40 using xhci_hcd
[ 4306.633240] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4306.782527] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4306.909299] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4309.092723] Bluetooth: hci1: command 0x1001 tx timeout
[ 4311.300911] usb 1-1: unable to read config index 0 descriptor/all
[ 4311.300920] usb 1-1: can't read configurations, error -110
[ 4311.428804] usb 1-1: new full-speed USB device number 41 using xhci_hcd
[ 4316.676866] usb 1-1: unable to read config index 0 descriptor/all
[ 4316.676876] usb 1-1: can't read configurations, error -110
[ 4316.676942] usb usb1-port1: attempt power cycle
[ 4317.088754] usb 1-1: new full-speed USB device number 42 using xhci_hcd
[ 4317.188762] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4321.365662] usb 1-1: unable to read config index 0 descriptor/all
[ 4321.365672] usb 1-1: can't read configurations, error -71
[ 4321.700563] usb 1-1: new full-speed USB device number 43 using xhci_hcd
[ 4321.722165] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4321.722170] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4321.722172] usb 1-1: Product: ConBee II
[ 4321.722173] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4321.722174] usb 1-1: SerialNumber: DE2227330
[ 4321.722229] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4321.722243] No Local Variables are initialized for Method [_PLD]

[ 4321.722248] No Arguments are initialized for method [_PLD]

[ 4321.722250] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4321.723856] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4321.723869] No Local Variables are initialized for Method [_PLD]

[ 4321.723870] No Arguments are initialized for method [_PLD]

[ 4321.723872] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4321.724099] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4321.724130] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4321.724138] No Local Variables are initialized for Method [_PLD]

[ 4321.724139] No Arguments are initialized for method [_PLD]

[ 4321.724141] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4325.182746] usb 1-1: USB disconnect, device number 43
[ 4325.317207] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4325.466204] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4325.592697] usb 1-1: new full-speed USB device number 44 using xhci_hcd
[ 4325.869142] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4326.028745] Bluetooth: hci1: urb 000000002a877140 failed to resubmit (2)
[ 4328.036697] Bluetooth: hci1: command 0x1001 tx timeout
[ 4330.756585] usb 1-1: unable to read config index 0 descriptor/all
[ 4330.756595] usb 1-1: can't read configurations, error -110
[ 4330.888478] usb 1-1: new full-speed USB device number 46 using xhci_hcd
[ 4336.132665] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4336.132750] usb 1-1: unable to read config index 0 descriptor/all
[ 4336.132755] usb 1-1: can't read configurations, error -110
[ 4336.133334] usb usb1-port1: attempt power cycle
[ 4336.544642] usb 1-1: new full-speed USB device number 47 using xhci_hcd
[ 4337.169065] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4340.872712] usb 1-1: unable to read config index 0 descriptor/all
[ 4340.872721] usb 1-1: can't read configurations, error -71
[ 4341.208437] usb 1-1: new full-speed USB device number 48 using xhci_hcd
[ 4341.230238] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4341.230243] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4341.230245] usb 1-1: Product: ConBee II
[ 4341.230246] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4341.230247] usb 1-1: SerialNumber: DE2227330
[ 4341.230302] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4341.230314] No Local Variables are initialized for Method [_PLD]

[ 4341.230316] No Arguments are initialized for method [_PLD]

[ 4341.230317] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4341.231875] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4341.231886] No Local Variables are initialized for Method [_PLD]

[ 4341.231887] No Arguments are initialized for method [_PLD]

[ 4341.231889] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4341.232078] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4341.232111] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4341.232119] No Local Variables are initialized for Method [_PLD]

[ 4341.232120] No Arguments are initialized for method [_PLD]

[ 4341.232122] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4342.405015] usb 1-1: reset full-speed USB device number 48 using xhci_hcd
[ 4344.690765] usb 1-1: USB disconnect, device number 48
[ 4345.068414] usb 1-1: new full-speed USB device number 49 using xhci_hcd
[ 4346.261082] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4346.410205] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4346.537046] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4346.696039] Bluetooth: hci1: urb 00000000fedb6d33 failed to resubmit (2)
[ 4348.708545] Bluetooth: hci1: command 0x1001 tx timeout
[ 4350.468676] usb 1-1: unable to read config index 0 descriptor/all
[ 4350.468685] usb 1-1: can't read configurations, error -110
[ 4350.596541] usb 1-1: new full-speed USB device number 50 using xhci_hcd
[ 4355.844395] usb 1-1: unable to read config index 0 descriptor/all
[ 4355.844406] usb 1-1: can't read configurations, error -110
[ 4355.844470] usb usb1-port1: attempt power cycle
[ 4356.260318] usb 1-1: new full-speed USB device number 51 using xhci_hcd
[ 4356.868312] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4357.296532] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4357.876979] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4360.384182] usb 1-1: unable to read config index 0 descriptor/all
[ 4360.384192] usb 1-1: can't read configurations, error -71
[ 4360.720488] usb 1-1: new full-speed USB device number 52 using xhci_hcd
[ 4360.742166] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4360.742172] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4360.742173] usb 1-1: Product: ConBee II
[ 4360.742175] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4360.742176] usb 1-1: SerialNumber: DE2227330
[ 4360.742227] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4360.742242] No Local Variables are initialized for Method [_PLD]

[ 4360.742243] No Arguments are initialized for method [_PLD]

[ 4360.742245] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4360.743970] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4360.743981] No Local Variables are initialized for Method [_PLD]

[ 4360.743982] No Arguments are initialized for method [_PLD]

[ 4360.743983] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4360.744205] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4360.744235] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4360.744246] No Local Variables are initialized for Method [_PLD]

[ 4360.744247] No Arguments are initialized for method [_PLD]

[ 4360.744249] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4364.201111] usb 1-1: USB disconnect, device number 52
[ 4364.580323] usb 1-1: new full-speed USB device number 53 using xhci_hcd
[ 4364.996911] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4365.146214] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 4365.272931] usb 1-3: reset full-speed USB device number 45 using xhci_hcd
[ 4365.432046] Bluetooth: hci1: urb 00000000eb675d73 failed to resubmit (2)
[ 4367.460440] Bluetooth: hci1: command 0x1001 tx timeout
[ 4369.924565] usb 1-1: unable to read config index 0 descriptor/all
[ 4369.924575] usb 1-1: can't read configurations, error -110
[ 4370.052432] usb 1-1: new full-speed USB device number 54 using xhci_hcd
[ 4375.300513] usb 1-1: unable to read config index 0 descriptor/all
[ 4375.300522] usb 1-1: can't read configurations, error -110
[ 4375.300639] usb usb1-port1: attempt power cycle
[ 4375.556391] Bluetooth: hci1: CSR: Local version failed (-110)
[ 4375.716231] usb 1-1: new full-speed USB device number 55 using xhci_hcd
[ 4375.737829] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 4375.737836] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4375.737838] usb 1-1: Product: ConBee II
[ 4375.737840] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 4375.737841] usb 1-1: SerialNumber: DE2227330
[ 4375.737902] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4375.737918] No Local Variables are initialized for Method [_PLD]

[ 4375.737919] No Arguments are initialized for method [_PLD]

[ 4375.737922] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4375.739437] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4375.739455] No Local Variables are initialized for Method [_PLD]

[ 4375.739457] No Arguments are initialized for method [_PLD]

[ 4375.739459] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4375.739757] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 4375.739805] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 4375.739817] No Local Variables are initialized for Method [_PLD]

[ 4375.739818] No Arguments are initialized for method [_PLD]

[ 4375.739820] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 4428.484540] usb 1-1: reset full-speed USB device number 55 using xhci_hcd
[ 4429.192332] usb 1-2: reset full-speed USB device number 24 using xhci_hcd
[ 4963.162342] perf: interrupt took too long (3132 > 3131), lowering kernel.perf_event_max_sample_rate to 63750
[ 7370.356348] usb 1-3: USB disconnect, device number 45
[ 7373.241378] usb 1-3: new full-speed USB device number 56 using xhci_hcd
[ 7373.464382] usb 1-3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=82.41
[ 7373.464403] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7373.467748] Bluetooth: hci1: unexpected event for opcode 0x0000
[ 7373.468756] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=6 rev=2031
[ 7373.468761] Bluetooth: hci1: LMP ver=6 subver=2031; manufacturer=10
[ 7373.925870] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[ 7475.206547] usb 1-2: USB disconnect, device number 24
[ 7475.785253] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[ 7475.949096] Bluetooth: hci1: urb 00000000beb29417 failed to resubmit (2)
[ 7477.192750] usb 1-2: new full-speed USB device number 57 using xhci_hcd
[ 7477.320768] usb 1-2: device descriptor read/64, error -71
[ 7477.556772] usb 1-2: device descriptor read/64, error -71
[ 7477.792748] usb 1-2: new full-speed USB device number 58 using xhci_hcd
[ 7477.920769] usb 1-2: device descriptor read/64, error -71
[ 7477.968744] Bluetooth: hci1: command 0x1001 tx timeout
[ 7478.156762] usb 1-2: device descriptor read/64, error -71
[ 7478.264807] usb usb1-port2: attempt power cycle
[ 7478.884744] usb 1-2: new full-speed USB device number 59 using xhci_hcd
[ 7478.905836] usb 1-2: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
[ 7478.905842] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7478.905894] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 7478.905908] No Local Variables are initialized for Method [_PLD]

[ 7478.905910] No Arguments are initialized for method [_PLD]

[ 7478.905911] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 7478.907639] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 7478.907650] No Local Variables are initialized for Method [_PLD]

[ 7478.907652] No Arguments are initialized for method [_PLD]

[ 7478.907653] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 7478.907789] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 7478.907824] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 7478.907832] No Local Variables are initialized for Method [_PLD]

[ 7478.907834] No Arguments are initialized for method [_PLD]

[ 7478.907835] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 7486.192719] Bluetooth: hci1: CSR: Local version failed (-110)
[ 7486.621124] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[ 7488.460956] usb 1-2: reset full-speed USB device number 59 using xhci_hcd
[ 7983.770691] usb 1-1: USB disconnect, device number 55
[ 7984.077863] usb 1-1: new full-speed USB device number 60 using xhci_hcd
[ 7984.227391] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 7984.227397] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7984.227398] usb 1-1: Product: ConBee II
[ 7984.227399] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 7984.227400] usb 1-1: SerialNumber: DE2227330
[ 7984.227454] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 7984.227467] No Local Variables are initialized for Method [_PLD]

[ 7984.227469] No Arguments are initialized for method [_PLD]

[ 7984.227470] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 7984.229055] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 7984.229066] No Local Variables are initialized for Method [_PLD]

[ 7984.229067] No Arguments are initialized for method [_PLD]

[ 7984.229069] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 7984.229263] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 7984.229297] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 7984.229304] No Local Variables are initialized for Method [_PLD]

[ 7984.229306] No Arguments are initialized for method [_PLD]

[ 7984.229307] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 7986.058250] usb 1-1: reset full-speed USB device number 60 using xhci_hcd
[ 7987.602417] usb 1-1: USB disconnect, device number 60
[ 7987.910260] usb 1-2: reset full-speed USB device number 59 using xhci_hcd
[ 7988.059316] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 7988.185824] usb 1-1: new full-speed USB device number 61 using xhci_hcd
[ 7988.462269] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[ 7988.613350] Bluetooth: hci1: urb 0000000059a5cad2 failed to resubmit (2)
[ 7990.637820] Bluetooth: hci1: command 0x1001 tx timeout
[ 7993.581906] usb 1-1: unable to read config index 0 descriptor/all
[ 7993.581916] usb 1-1: can't read configurations, error -110
[ 7993.709806] usb 1-1: new full-speed USB device number 62 using xhci_hcd
[ 7998.701779] Bluetooth: hci1: CSR: Local version failed (-110)
[ 7998.957713] usb 1-1: unable to read config index 0 descriptor/all
[ 7998.957723] usb 1-1: can't read configurations, error -110
[ 7998.957832] usb usb1-port1: attempt power cycle
[ 7999.133869] usb 1-2: reset full-speed USB device number 59 using xhci_hcd
[ 7999.621608] usb 1-1: new full-speed USB device number 63 using xhci_hcd
[ 7999.833778] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[ 8003.225404] usb 1-1: unable to read config index 0 descriptor/all
[ 8003.225415] usb 1-1: can't read configurations, error -71
[ 8003.561581] usb 1-1: new full-speed USB device number 64 using xhci_hcd
[ 8003.583316] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 8003.583320] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8003.583321] usb 1-1: Product: ConBee II
[ 8003.583322] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 8003.583323] usb 1-1: SerialNumber: DE2227330
[ 8003.583378] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 8003.583391] No Local Variables are initialized for Method [_PLD]

[ 8003.583392] No Arguments are initialized for method [_PLD]

[ 8003.583394] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 8003.585031] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 8003.585043] No Local Variables are initialized for Method [_PLD]

[ 8003.585044] No Arguments are initialized for method [_PLD]

[ 8003.585046] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 8003.585269] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 8003.585303] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 8003.585311] No Local Variables are initialized for Method [_PLD]

[ 8003.585313] No Arguments are initialized for method [_PLD]

[ 8003.585314] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 8004.970152] usb 1-1: reset full-speed USB device number 64 using xhci_hcd
[ 8007.054103] usb 1-1: USB disconnect, device number 64
[ 8007.401563] usb 1-1: new full-speed USB device number 65 using xhci_hcd
[ 8007.551266] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[ 8007.551272] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8007.551274] usb 1-1: Product: ConBee II
[ 8007.551285] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 8007.551286] usb 1-1: SerialNumber: DE2227330
[ 8007.551341] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 8007.551354] No Local Variables are initialized for Method [_PLD]

[ 8007.551356] No Arguments are initialized for method [_PLD]

[ 8007.551357] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 8007.552920] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 8007.552929] No Local Variables are initialized for Method [_PLD]

[ 8007.552930] No Arguments are initialized for method [_PLD]

[ 8007.552931] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 8007.553154] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 8007.553184] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[ 8007.553191] No Local Variables are initialized for Method [_PLD]

[ 8007.553192] No Arguments are initialized for method [_PLD]

[ 8007.553194] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[ 8009.322014] usb 1-1: reset full-speed USB device number 65 using xhci_hcd
[ 9838.255843] perf: interrupt took too long (3924 > 3915), lowering kernel.perf_event_max_sample_rate to 50750
[242671.743194] usb 1-2: USB disconnect, device number 59
[242673.900348] usb 1-4: USB disconnect, device number 5
[242681.864532] usb 1-4: new full-speed USB device number 66 using xhci_hcd
[242681.992542] usb 1-4: device descriptor read/64, error -71
[242682.228614] usb 1-4: device descriptor read/64, error -71
[242682.464595] usb 1-4: new full-speed USB device number 67 using xhci_hcd
[242682.592602] usb 1-4: device descriptor read/64, error -71
[242682.828610] usb 1-4: device descriptor read/64, error -71
[242682.936702] usb usb1-port4: attempt power cycle
[242683.556435] usb 1-4: new full-speed USB device number 68 using xhci_hcd
[242683.577350] usb 1-4: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
[242683.577355] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[242683.579192] cdc_acm 1-4:1.0: ttyACM0: USB ACM device
[242684.184958] usb 1-4: reset full-speed USB device number 68 using xhci_hcd
[243191.671441] usb 1-4: USB disconnect, device number 68
[243193.789598] usb 1-2: new full-speed USB device number 69 using xhci_hcd
[243193.917609] usb 1-2: device descriptor read/64, error -71
[243194.153616] usb 1-2: device descriptor read/64, error -71
[243194.393589] usb 1-2: new full-speed USB device number 70 using xhci_hcd
[243194.529607] usb 1-2: device descriptor read/64, error -71
[243194.765606] usb 1-2: device descriptor read/64, error -71
[243194.873571] usb usb1-port2: attempt power cycle
[243195.493581] usb 1-2: new full-speed USB device number 71 using xhci_hcd
[243195.514468] usb 1-2: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
[243195.514474] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[243195.514526] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[243195.514540] No Local Variables are initialized for Method [_PLD]

[243195.514542] No Arguments are initialized for method [_PLD]

[243195.514544] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[243195.516041] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[243195.516056] No Local Variables are initialized for Method [_PLD]

[243195.516058] No Arguments are initialized for method [_PLD]

[243195.516060] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[243195.516210] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[243195.516249] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[243195.516258] No Local Variables are initialized for Method [_PLD]

[243195.516259] No Arguments are initialized for method [_PLD]

[243195.516261] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[243195.949852] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[243210.609484] usb 1-4: new high-speed USB device number 72 using xhci_hcd
[243210.758244] usb 1-4: New USB device found, idVendor=12d1, idProduct=1f01, bcdDevice= 1.02
[243210.758249] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[243210.758251] usb 1-4: Product: HUAWEI_MOBILE
[243210.758252] usb 1-4: Manufacturer: HUAWEI_MOBILE
[243210.758253] usb 1-4: SerialNumber: 0123456789ABCDEF
[243210.759940] usb-storage 1-4:1.0: USB Mass Storage device detected
[243210.760138] scsi host2: usb-storage 1-4:1.0
[243211.342292] usb 1-4: USB disconnect, device number 72
[243211.877488] usb 1-4: new high-speed USB device number 73 using xhci_hcd
[243212.025923] usb 1-4: New USB device found, idVendor=12d1, idProduct=1442, bcdDevice= 1.02
[243212.025929] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[243212.025930] usb 1-4: Product: HUAWEI_MOBILE
[243212.025931] usb 1-4: Manufacturer: HUAWEI_MOBILE
[243212.029142] option 1-4:1.0: GSM modem (1-port) converter detected
[243212.029228] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0
[243212.029492] usb-storage 1-4:1.1: USB Mass Storage device detected
[243212.029685] scsi host2: usb-storage 1-4:1.1
[243213.045915] scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.3M PQ: 0 ANSI: 2
[243213.046475] sr 2:0:0:0: Power-on or device reset occurred
[243213.047316] sr 2:0:0:0: [sr0] scsi-1 drive
[243213.047785] sr 2:0:0:0: Attached scsi CD-ROM sr0
[243213.048353] sr 2:0:0:0: Attached scsi generic sg1 type 5
[243213.684307] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[243213.684321] option 1-4:1.0: device disconnected
[243214.013888] usb 1-4: reset high-speed USB device number 73 using xhci_hcd
[254748.830882] usb 1-4: reset high-speed USB device number 73 using xhci_hcd
[254749.294716] usb 1-1: reset full-speed USB device number 65 using xhci_hcd
[254749.754719] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[254750.214727] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[254761.130478] usb 1-4: reset high-speed USB device number 73 using xhci_hcd
[254761.686502] usb 1-1: reset full-speed USB device number 65 using xhci_hcd
[254762.246496] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[254762.798489] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255175.315878] usb 1-1: USB disconnect, device number 65
[255175.643901] usb 1-1: new full-speed USB device number 74 using xhci_hcd
[255175.805350] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255175.805356] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255175.805357] usb 1-1: Product: ConBee II
[255175.805359] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255175.805360] usb 1-1: SerialNumber: DE2227330
[255175.805414] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255175.805430] No Local Variables are initialized for Method [_PLD]

[255175.805431] No Arguments are initialized for method [_PLD]

[255175.805433] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255175.807206] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255175.807216] No Local Variables are initialized for Method [_PLD]

[255175.807218] No Arguments are initialized for method [_PLD]

[255175.807219] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255175.807412] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255175.807445] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255175.807453] No Local Variables are initialized for Method [_PLD]

[255175.807454] No Arguments are initialized for method [_PLD]

[255175.807455] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255177.596224] usb 1-1: reset full-speed USB device number 74 using xhci_hcd
[255179.146783] usb 1-1: USB disconnect, device number 74
[255179.452379] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255179.601424] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255179.727960] usb 1-1: new full-speed USB device number 75 using xhci_hcd
[255180.004408] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255182.187943] Bluetooth: hci1: command 0x1001 tx timeout
[255184.940024] usb 1-1: unable to read config index 0 descriptor/all
[255184.940033] usb 1-1: can't read configurations, error -110
[255185.067903] usb 1-1: new full-speed USB device number 76 using xhci_hcd
[255190.315899] Bluetooth: hci1: CSR: Local version failed (-110)
[255190.317484] usb 1-1: unable to read config index 0 descriptor/all
[255190.317497] usb 1-1: can't read configurations, error -110
[255190.317585] usb usb1-port1: attempt power cycle
[255190.727891] usb 1-1: new full-speed USB device number 77 using xhci_hcd
[255190.876344] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255191.576327] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255194.775658] usb 1-1: unable to read config index 0 descriptor/all
[255194.775669] usb 1-1: can't read configurations, error -71
[255195.111662] usb 1-1: new full-speed USB device number 78 using xhci_hcd
[255195.137192] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255195.137197] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255195.137199] usb 1-1: Product: ConBee II
[255195.137200] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255195.137202] usb 1-1: SerialNumber: DE2227330
[255195.137266] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255195.137283] No Local Variables are initialized for Method [_PLD]

[255195.137284] No Arguments are initialized for method [_PLD]

[255195.137286] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255195.139110] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255195.139124] No Local Variables are initialized for Method [_PLD]

[255195.139125] No Arguments are initialized for method [_PLD]

[255195.139127] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255195.139343] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255195.139376] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255195.139384] No Local Variables are initialized for Method [_PLD]

[255195.139386] No Arguments are initialized for method [_PLD]

[255195.139387] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255196.588309] usb 1-1: reset full-speed USB device number 78 using xhci_hcd
[255198.601186] usb 1-1: USB disconnect, device number 78
[255198.955772] usb 1-1: new full-speed USB device number 79 using xhci_hcd
[255200.443927] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255200.593664] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255200.720297] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255202.891817] Bluetooth: hci1: command 0x1001 tx timeout
[255204.139840] usb 1-1: unable to read config index 0 descriptor/all
[255204.139850] usb 1-1: can't read configurations, error -110
[255204.267794] usb 1-1: new full-speed USB device number 80 using xhci_hcd
[255209.515890] usb 1-1: unable to read config index 0 descriptor/all
[255209.515900] usb 1-1: can't read configurations, error -110
[255209.516018] usb usb1-port1: attempt power cycle
[255209.927770] usb 1-1: new full-speed USB device number 81 using xhci_hcd
[255211.051772] Bluetooth: hci1: CSR: Local version failed (-110)
[255211.471999] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255212.176236] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255214.245766] usb 1-1: unable to read config index 0 descriptor/all
[255214.245775] usb 1-1: can't read configurations, error -71
[255214.579561] usb 1-1: new full-speed USB device number 82 using xhci_hcd
[255214.601139] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255214.601145] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255214.601147] usb 1-1: Product: ConBee II
[255214.601148] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255214.601149] usb 1-1: SerialNumber: DE2227330
[255214.601204] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255214.601217] No Local Variables are initialized for Method [_PLD]

[255214.601218] No Arguments are initialized for method [_PLD]

[255214.601220] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255214.603111] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255214.603129] No Local Variables are initialized for Method [_PLD]

[255214.603130] No Arguments are initialized for method [_PLD]

[255214.603132] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255214.603357] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255214.603398] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255214.603409] No Local Variables are initialized for Method [_PLD]

[255214.603410] No Arguments are initialized for method [_PLD]

[255214.603412] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255215.328246] usb 1-1: reset full-speed USB device number 82 using xhci_hcd
[255218.070014] usb 1-1: USB disconnect, device number 82
[255218.447652] usb 1-1: new full-speed USB device number 83 using xhci_hcd
[255219.179978] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255219.329460] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255219.456125] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255221.643699] Bluetooth: hci1: command 0x1001 tx timeout
[255223.851810] usb 1-1: unable to read config index 0 descriptor/all
[255223.851819] usb 1-1: can't read configurations, error -110
[255223.979687] usb 1-1: new full-speed USB device number 84 using xhci_hcd
[255229.227761] usb 1-1: unable to read config index 0 descriptor/all
[255229.227770] usb 1-1: can't read configurations, error -110
[255229.227885] usb usb1-port1: attempt power cycle
[255229.639639] usb 1-1: new full-speed USB device number 85 using xhci_hcd
[255229.739657] Bluetooth: hci1: CSR: Local version failed (-110)
[255233.724433] usb 1-1: unable to read config index 0 descriptor/all
[255233.724443] usb 1-1: can't read configurations, error -71
[255234.059641] usb 1-1: new full-speed USB device number 86 using xhci_hcd
[255234.081618] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255234.081624] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255234.081626] usb 1-1: Product: ConBee II
[255234.081627] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255234.081628] usb 1-1: SerialNumber: DE2227330
[255234.081681] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255234.081696] No Local Variables are initialized for Method [_PLD]

[255234.081697] No Arguments are initialized for method [_PLD]

[255234.081699] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255234.083406] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255234.083417] No Local Variables are initialized for Method [_PLD]

[255234.083418] No Arguments are initialized for method [_PLD]

[255234.083420] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255234.083645] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255234.083689] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255234.083699] No Local Variables are initialized for Method [_PLD]

[255234.083700] No Arguments are initialized for method [_PLD]

[255234.083702] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255235.108052] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255237.548200] usb 1-1: USB disconnect, device number 86
[255237.671736] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255237.955607] usb 1-1: new full-speed USB device number 87 using xhci_hcd
[255238.232004] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255238.381274] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255238.508096] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255240.683579] Bluetooth: hci1: command 0x1001 tx timeout
[255243.307677] usb 1-1: unable to read config index 0 descriptor/all
[255243.307686] usb 1-1: can't read configurations, error -110
[255243.435564] usb 1-1: new full-speed USB device number 88 using xhci_hcd
[255248.683538] Bluetooth: hci1: CSR: Local version failed (-110)
[255248.683648] usb 1-1: unable to read config index 0 descriptor/all
[255248.683653] usb 1-1: can't read configurations, error -110
[255248.683778] usb usb1-port1: attempt power cycle
[255249.095381] usb 1-1: new full-speed USB device number 89 using xhci_hcd
[255249.955918] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255253.209735] usb 1-1: unable to read config index 0 descriptor/all
[255253.209745] usb 1-1: can't read configurations, error -71
[255253.551352] usb 1-1: new full-speed USB device number 90 using xhci_hcd
[255253.573344] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255253.573350] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255253.573351] usb 1-1: Product: ConBee II
[255253.573352] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255253.573353] usb 1-1: SerialNumber: DE2227330
[255253.573406] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255253.573419] No Local Variables are initialized for Method [_PLD]

[255253.573421] No Arguments are initialized for method [_PLD]

[255253.573422] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255253.574985] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255253.574997] No Local Variables are initialized for Method [_PLD]

[255253.574998] No Arguments are initialized for method [_PLD]

[255253.575000] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255253.575224] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255253.575261] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255253.575271] No Local Variables are initialized for Method [_PLD]

[255253.575272] No Arguments are initialized for method [_PLD]

[255253.575274] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255254.955916] usb 1-1: reset full-speed USB device number 90 using xhci_hcd
[255257.034633] usb 1-1: USB disconnect, device number 90
[255257.419424] usb 1-1: new full-speed USB device number 91 using xhci_hcd
[255258.811919] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255258.961206] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255259.087944] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255261.259481] Bluetooth: hci1: command 0x1001 tx timeout
[255262.763555] usb 1-1: unable to read config index 0 descriptor/all
[255262.763564] usb 1-1: can't read configurations, error -110
[255262.891455] usb 1-1: new full-speed USB device number 92 using xhci_hcd
[255268.139528] usb 1-1: unable to read config index 0 descriptor/all
[255268.139537] usb 1-1: can't read configurations, error -110
[255268.139605] usb usb1-port1: attempt power cycle
[255268.551413] usb 1-1: new full-speed USB device number 93 using xhci_hcd
[255269.419424] Bluetooth: hci1: CSR: Local version failed (-110)
[255272.702883] usb 1-1: unable to read config index 0 descriptor/all
[255272.702893] usb 1-1: can't read configurations, error -71
[255273.043212] usb 1-1: new full-speed USB device number 94 using xhci_hcd
[255273.068976] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255273.068981] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255273.068983] usb 1-1: Product: ConBee II
[255273.068984] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255273.068985] usb 1-1: SerialNumber: DE2227330
[255273.069036] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255273.069051] No Local Variables are initialized for Method [_PLD]

[255273.069053] No Arguments are initialized for method [_PLD]

[255273.069054] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255273.075542] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255273.075558] No Local Variables are initialized for Method [_PLD]

[255273.075560] No Arguments are initialized for method [_PLD]

[255273.075561] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255273.075802] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255273.075834] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255273.075842] No Local Variables are initialized for Method [_PLD]

[255273.075844] No Arguments are initialized for method [_PLD]

[255273.075845] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255274.795871] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255275.499804] usb 1-3: reset full-speed USB device number 56 using xhci_hcd
[255276.211763] usb 1-1: reset full-speed USB device number 94 using xhci_hcd
[255276.521784] usb 1-1: USB disconnect, device number 94
[255276.867221] usb 1-1: new full-speed USB device number 95 using xhci_hcd
[255282.219227] usb 1-1: unable to read config index 0 descriptor/all
[255282.219238] usb 1-1: can't read configurations, error -110
[255282.347147] usb 1-1: new full-speed USB device number 96 using xhci_hcd
[255287.595221] usb 1-1: unable to read config index 0 descriptor/all
[255287.595232] usb 1-1: can't read configurations, error -110
[255287.595297] usb usb1-port1: attempt power cycle
[255288.007127] usb 1-1: new full-speed USB device number 97 using xhci_hcd
[255292.193779] usb 1-1: unable to read config index 0 descriptor/all
[255292.193790] usb 1-1: can't read configurations, error -71
[255292.527092] usb 1-1: new full-speed USB device number 98 using xhci_hcd
[255292.548705] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255292.548710] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255292.548711] usb 1-1: Product: ConBee II
[255292.548713] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255292.548714] usb 1-1: SerialNumber: DE2227330
[255292.548776] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255292.548798] No Local Variables are initialized for Method [_PLD]

[255292.548799] No Arguments are initialized for method [_PLD]

[255292.548801] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255292.550662] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255292.550677] No Local Variables are initialized for Method [_PLD]

[255292.550679] No Arguments are initialized for method [_PLD]

[255292.550681] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255292.550905] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255292.550945] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255292.550954] No Local Variables are initialized for Method [_PLD]

[255292.550956] No Arguments are initialized for method [_PLD]

[255292.550958] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255292.551034] usb 1-3: USB disconnect, device number 56
[255292.823205] usb 1-3: new full-speed USB device number 99 using xhci_hcd
[255292.982095] usb 1-3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=82.41
[255292.982115] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[255292.984752] Bluetooth: hci1: unexpected event for opcode 0x0000
[255292.985764] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=6 rev=2031
[255292.985769] Bluetooth: hci1: LMP ver=6 subver=2031; manufacturer=10
[255294.562179] Bluetooth: hci1: urb 00000000db7b8f9a failed to resubmit (2)
[255294.831277] usb 1-1: reset full-speed USB device number 98 using xhci_hcd
[255295.535281] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255296.008091] usb 1-1: USB disconnect, device number 98
[255296.387075] usb 1-1: new full-speed USB device number 100 using xhci_hcd
[255296.687737] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255296.836955] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255296.963711] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255299.115227] Bluetooth: hci1: command 0x1001 tx timeout
[255301.675386] usb 1-1: unable to read config index 0 descriptor/all
[255301.675397] usb 1-1: can't read configurations, error -110
[255301.803222] usb 1-1: new full-speed USB device number 101 using xhci_hcd
[255307.051314] usb 1-1: unable to read config index 0 descriptor/all
[255307.051323] usb 1-1: can't read configurations, error -110
[255307.051438] usb usb1-port1: attempt power cycle
[255307.307207] Bluetooth: hci1: CSR: Local version failed (-110)
[255307.467202] usb 1-1: new full-speed USB device number 102 using xhci_hcd
[255307.727605] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255308.423707] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255311.686004] usb 1-1: unable to read config index 0 descriptor/all
[255311.686014] usb 1-1: can't read configurations, error -71
[255312.019075] usb 1-1: new full-speed USB device number 103 using xhci_hcd
[255312.041021] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255312.041027] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255312.041028] usb 1-1: Product: ConBee II
[255312.041030] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255312.041031] usb 1-1: SerialNumber: DE2227330
[255312.041082] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255312.041097] No Local Variables are initialized for Method [_PLD]

[255312.041098] No Arguments are initialized for method [_PLD]

[255312.041100] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255312.042721] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255312.042733] No Local Variables are initialized for Method [_PLD]

[255312.042734] No Arguments are initialized for method [_PLD]

[255312.042736] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255312.042932] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255312.042962] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255312.042981] No Local Variables are initialized for Method [_PLD]

[255312.042983] No Arguments are initialized for method [_PLD]

[255312.042986] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255313.575640] usb 1-1: reset full-speed USB device number 103 using xhci_hcd
[255315.506469] usb 1-1: USB disconnect, device number 103
[255315.867001] usb 1-1: new full-speed USB device number 104 using xhci_hcd
[255317.435526] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255317.584727] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255317.711605] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255319.883127] Bluetooth: hci1: command 0x1001 tx timeout
[255321.131022] usb 1-1: unable to read config index 0 descriptor/all
[255321.131033] usb 1-1: can't read configurations, error -110
[255321.258914] usb 1-1: new full-speed USB device number 105 using xhci_hcd
[255326.507174] usb 1-1: unable to read config index 0 descriptor/all
[255326.507184] usb 1-1: can't read configurations, error -110
[255326.507303] usb usb1-port1: attempt power cycle
[255326.919077] usb 1-1: new full-speed USB device number 106 using xhci_hcd
[255328.043078] Bluetooth: hci1: CSR: Local version failed (-110)
[255331.187845] usb 1-1: unable to read config index 0 descriptor/all
[255331.187854] usb 1-1: can't read configurations, error -71
[255331.522988] usb 1-1: new full-speed USB device number 107 using xhci_hcd
[255331.544558] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255331.544563] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255331.544565] usb 1-1: Product: ConBee II
[255331.544566] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255331.544567] usb 1-1: SerialNumber: DE2227330
[255331.544620] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255331.544632] No Local Variables are initialized for Method [_PLD]

[255331.544633] No Arguments are initialized for method [_PLD]

[255331.544635] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255331.546205] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255331.546216] No Local Variables are initialized for Method [_PLD]

[255331.546217] No Arguments are initialized for method [_PLD]

[255331.546219] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255331.546440] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255331.546476] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255331.546484] No Local Variables are initialized for Method [_PLD]

[255331.546485] No Arguments are initialized for method [_PLD]

[255331.546487] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255333.415459] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255334.131526] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255334.843456] usb 1-1: reset full-speed USB device number 107 using xhci_hcd
[255335.005939] usb 1-1: USB disconnect, device number 107
[255335.351045] usb 1-1: new full-speed USB device number 108 using xhci_hcd
[255340.587035] usb 1-1: unable to read config index 0 descriptor/all
[255340.587045] usb 1-1: can't read configurations, error -110
[255340.715000] usb 1-1: new full-speed USB device number 109 using xhci_hcd
[255345.966881] usb 1-1: unable to read config index 0 descriptor/all
[255345.966892] usb 1-1: can't read configurations, error -110
[255345.966963] usb usb1-port1: attempt power cycle
[255346.398770] usb 1-1: new full-speed USB device number 110 using xhci_hcd
[255346.424469] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255346.424474] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255346.424476] usb 1-1: Product: ConBee II
[255346.424477] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255346.424478] usb 1-1: SerialNumber: DE2227330
[255346.424534] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255346.424551] No Local Variables are initialized for Method [_PLD]

[255346.424552] No Arguments are initialized for method [_PLD]

[255346.424554] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255346.426130] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255346.426143] No Local Variables are initialized for Method [_PLD]

[255346.426144] No Arguments are initialized for method [_PLD]

[255346.426146] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255346.426381] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255346.426413] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255346.426422] No Local Variables are initialized for Method [_PLD]

[255346.426423] No Arguments are initialized for method [_PLD]

[255346.426425] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255378.003617] usb 1-1: USB disconnect, device number 110
[255378.318717] usb 1-1: new full-speed USB device number 111 using xhci_hcd
[255378.468265] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255378.468271] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255378.468273] usb 1-1: Product: ConBee II
[255378.468274] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255378.468275] usb 1-1: SerialNumber: DE2227330
[255378.468328] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255378.468342] No Local Variables are initialized for Method [_PLD]

[255378.468343] No Arguments are initialized for method [_PLD]

[255378.468345] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255378.469935] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255378.469944] No Local Variables are initialized for Method [_PLD]

[255378.469945] No Arguments are initialized for method [_PLD]

[255378.469947] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255378.470164] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255378.470195] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255378.470203] No Local Variables are initialized for Method [_PLD]

[255378.470204] No Arguments are initialized for method [_PLD]

[255378.470206] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255381.829049] usb 1-1: USB disconnect, device number 111
[255382.182611] usb 1-1: new full-speed USB device number 112 using xhci_hcd
[255383.571216] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255383.720490] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[255383.847221] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255384.006652] Bluetooth: hci1: urb 000000003485a319 failed to resubmit (2)
[255386.026734] Bluetooth: hci1: command 0x1001 tx timeout
[255387.435510] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255387.435517] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255387.435519] usb 1-1: Product: ConBee II
[255387.435520] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255387.435521] usb 1-1: SerialNumber: DE2227330
[255387.435575] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255387.435588] No Local Variables are initialized for Method [_PLD]

[255387.435589] No Arguments are initialized for method [_PLD]

[255387.435591] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255387.437360] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255387.437377] No Local Variables are initialized for Method [_PLD]

[255387.437378] No Arguments are initialized for method [_PLD]

[255387.437380] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255387.437643] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255387.437682] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255387.437690] No Local Variables are initialized for Method [_PLD]

[255387.437691] No Arguments are initialized for method [_PLD]

[255387.437693] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255394.090680] Bluetooth: hci1: CSR: Local version failed (-110)
[255399.459065] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255400.155087] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255400.875036] usb 1-1: reset full-speed USB device number 112 using xhci_hcd
[255977.871304] usb 1-1: USB disconnect, device number 112
[255978.191054] usb 1-1: new full-speed USB device number 113 using xhci_hcd
[255978.341260] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255978.341265] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255978.341266] usb 1-1: Product: ConBee II
[255978.341268] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255978.341269] usb 1-1: SerialNumber: DE2227330
[255978.341319] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255978.341333] No Local Variables are initialized for Method [_PLD]

[255978.341334] No Arguments are initialized for method [_PLD]

[255978.341336] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255978.343085] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255978.343102] No Local Variables are initialized for Method [_PLD]

[255978.343103] No Arguments are initialized for method [_PLD]

[255978.343105] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255978.343351] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255978.343408] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255978.343416] No Local Variables are initialized for Method [_PLD]

[255978.343417] No Arguments are initialized for method [_PLD]

[255978.343419] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255978.467735] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255978.616946] cdc_acm 1-2:1.0: ttyACM1: USB ACM device
[255978.743717] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255978.907583] Bluetooth: hci1: urb 00000000eb675d73 failed to resubmit (2)
[255980.935239] Bluetooth: hci1: command 0x1001 tx timeout
[255981.701039] usb 1-1: USB disconnect, device number 113
[255982.079213] usb 1-1: new full-speed USB device number 114 using xhci_hcd
[255987.239347] usb 1-1: unable to read config index 0 descriptor/all
[255987.239356] usb 1-1: can't read configurations, error -110
[255987.367189] usb 1-1: new full-speed USB device number 115 using xhci_hcd
[255989.031201] Bluetooth: hci1: CSR: Local version failed (-110)
[255990.211437] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[255990.911594] usb 1-3: reset full-speed USB device number 99 using xhci_hcd
[255992.615053] usb 1-1: unable to read config index 0 descriptor/all
[255992.615064] usb 1-1: can't read configurations, error -110
[255992.615132] usb usb1-port1: attempt power cycle
[255993.026976] usb 1-1: new full-speed USB device number 116 using xhci_hcd
[255993.048654] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[255993.048658] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[255993.048659] usb 1-1: Product: ConBee II
[255993.048660] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[255993.048661] usb 1-1: SerialNumber: DE2227330
[255993.048733] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255993.048748] No Local Variables are initialized for Method [_PLD]

[255993.048749] No Arguments are initialized for method [_PLD]

[255993.048751] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255993.050425] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255993.050441] No Local Variables are initialized for Method [_PLD]

[255993.050443] No Arguments are initialized for method [_PLD]

[255993.050445] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255993.050701] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[255993.050747] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[255993.050757] No Local Variables are initialized for Method [_PLD]

[255993.050758] No Arguments are initialized for method [_PLD]

[255993.050768] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[255993.050853] usb 1-3: USB disconnect, device number 99
[255993.322980] usb 1-3: new full-speed USB device number 117 using xhci_hcd
[255993.473879] usb 1-3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=82.41
[255993.473885] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[255993.476752] Bluetooth: hci1: unexpected event for opcode 0x0000
[255993.477782] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=6 rev=2031
[255993.477786] Bluetooth: hci1: LMP ver=6 subver=2031; manufacturer=10
[255995.061372] Bluetooth: hci1: urb 0000000074328ca5 failed to resubmit (2)
[255995.755386] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256578.483377] usb 1-1: USB disconnect, device number 116
[256578.791637] usb 1-1: new full-speed USB device number 118 using xhci_hcd
[256578.941021] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256578.941027] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256578.941028] usb 1-1: Product: ConBee II
[256578.941029] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256578.941030] usb 1-1: SerialNumber: DE2227330
[256578.941084] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256578.941098] No Local Variables are initialized for Method [_PLD]

[256578.941099] No Arguments are initialized for method [_PLD]

[256578.941101] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256578.942651] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256578.942661] No Local Variables are initialized for Method [_PLD]

[256578.942662] No Arguments are initialized for method [_PLD]

[256578.942663] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256578.942894] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256578.942934] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256578.942943] No Local Variables are initialized for Method [_PLD]

[256578.942944] No Arguments are initialized for method [_PLD]

[256578.942946] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256582.311921] usb 1-1: USB disconnect, device number 118
[256582.675608] usb 1-1: new full-speed USB device number 119 using xhci_hcd
[256583.200186] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256583.349518] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[256583.476117] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256583.635607] Bluetooth: hci1: urb 0000000021ad4e0a failed to resubmit (2)
[256585.635475] Bluetooth: hci1: command 0x1001 tx timeout
[256588.067775] usb 1-1: unable to read config index 0 descriptor/all
[256588.067784] usb 1-1: can't read configurations, error -110
[256588.195646] usb 1-1: new full-speed USB device number 120 using xhci_hcd
[256593.443733] usb 1-1: unable to read config index 0 descriptor/all
[256593.443744] usb 1-1: can't read configurations, error -110
[256593.443811] usb usb1-port1: attempt power cycle
[256593.699623] Bluetooth: hci1: CSR: Local version failed (-110)
[256593.855447] usb 1-1: new full-speed USB device number 121 using xhci_hcd
[256594.120105] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256594.816103] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256597.954509] usb 1-1: unable to read config index 0 descriptor/all
[256597.954518] usb 1-1: can't read configurations, error -71
[256598.287601] usb 1-1: new full-speed USB device number 122 using xhci_hcd
[256598.309604] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256598.309608] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256598.309610] usb 1-1: Product: ConBee II
[256598.309611] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256598.309612] usb 1-1: SerialNumber: DE2227330
[256598.309664] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256598.309678] No Local Variables are initialized for Method [_PLD]

[256598.309680] No Arguments are initialized for method [_PLD]

[256598.309681] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256598.316127] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256598.316141] No Local Variables are initialized for Method [_PLD]

[256598.316142] No Arguments are initialized for method [_PLD]

[256598.316144] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256598.316387] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256598.316421] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256598.316429] No Local Variables are initialized for Method [_PLD]

[256598.316430] No Arguments are initialized for method [_PLD]

[256598.316432] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256599.968013] usb 1-1: reset full-speed USB device number 122 using xhci_hcd
[256601.779687] usb 1-1: USB disconnect, device number 122
[256602.159512] usb 1-1: new full-speed USB device number 123 using xhci_hcd
[256603.827986] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256603.977251] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[256604.104043] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256604.263143] Bluetooth: hci1: urb 00000000d5ba82d6 failed to resubmit (2)
[256606.275551] Bluetooth: hci1: command 0x1001 tx timeout
[256607.523645] usb 1-1: unable to read config index 0 descriptor/all
[256607.523655] usb 1-1: can't read configurations, error -110
[256607.651543] usb 1-1: new full-speed USB device number 124 using xhci_hcd
[256612.899624] usb 1-1: unable to read config index 0 descriptor/all
[256612.899633] usb 1-1: can't read configurations, error -110
[256612.899698] usb usb1-port1: attempt power cycle
[256613.311367] usb 1-1: new full-speed USB device number 125 using xhci_hcd
[256614.435497] Bluetooth: hci1: CSR: Local version failed (-110)
[256617.435542] usb 1-1: unable to read config index 0 descriptor/all
[256617.435552] usb 1-1: can't read configurations, error -71
[256617.771425] usb 1-1: new full-speed USB device number 126 using xhci_hcd
[256617.797407] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256617.797412] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256617.797414] usb 1-1: Product: ConBee II
[256617.797415] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256617.797416] usb 1-1: SerialNumber: DE2227330
[256617.797470] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256617.797483] No Local Variables are initialized for Method [_PLD]

[256617.797484] No Arguments are initialized for method [_PLD]

[256617.797486] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256617.799026] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256617.799039] No Local Variables are initialized for Method [_PLD]

[256617.799040] No Arguments are initialized for method [_PLD]

[256617.799042] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256617.799233] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256617.799264] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256617.799272] No Local Variables are initialized for Method [_PLD]

[256617.799273] No Arguments are initialized for method [_PLD]

[256617.799275] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256619.807895] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256620.507894] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256621.223723] usb 1-1: reset full-speed USB device number 126 using xhci_hcd
[256621.648339] usb 1-1: device firmware changed
[256621.648376] usb 1-1: USB disconnect, device number 126
[256621.779474] usb 1-1: new full-speed USB device number 127 using xhci_hcd
[256626.979388] usb 1-1: unable to read config index 0 descriptor/all
[256626.979398] usb 1-1: can't read configurations, error -110
[256627.107370] usb 1-1: new full-speed USB device number 4 using xhci_hcd
[256627.257469] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256627.257475] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256627.257476] usb 1-1: Product: ConBee II
[256627.257477] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256627.257478] usb 1-1: SerialNumber: DE2227330
[256627.257531] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256627.257544] No Local Variables are initialized for Method [_PLD]

[256627.257545] No Arguments are initialized for method [_PLD]

[256627.257547] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256627.259915] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256627.259927] No Local Variables are initialized for Method [_PLD]

[256627.259929] No Arguments are initialized for method [_PLD]

[256627.259931] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256627.260186] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256627.260218] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256627.260230] No Local Variables are initialized for Method [_PLD]

[256627.260233] No Arguments are initialized for method [_PLD]

[256627.260236] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256671.817834] usb 1-1: USB disconnect, device number 4
[256672.131056] usb 1-1: new full-speed USB device number 5 using xhci_hcd
[256672.284787] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256672.284792] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256672.284794] usb 1-1: Product: ConBee II
[256672.284795] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256672.284796] usb 1-1: SerialNumber: DE2227330
[256672.284853] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256672.284866] No Local Variables are initialized for Method [_PLD]

[256672.284867] No Arguments are initialized for method [_PLD]

[256672.284869] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256672.286424] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256672.286434] No Local Variables are initialized for Method [_PLD]

[256672.286435] No Arguments are initialized for method [_PLD]

[256672.286437] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256672.286652] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256672.286689] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256672.286697] No Local Variables are initialized for Method [_PLD]

[256672.286698] No Arguments are initialized for method [_PLD]

[256672.286700] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256675.645061] usb 1-1: USB disconnect, device number 5
[256675.787591] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256675.936638] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[256676.063129] usb 1-1: new full-speed USB device number 6 using xhci_hcd
[256676.339532] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256678.499122] Bluetooth: hci1: command 0x1001 tx timeout
[256681.251213] usb 1-1: unable to read config index 0 descriptor/all
[256681.251223] usb 1-1: can't read configurations, error -110
[256681.379096] usb 1-1: new full-speed USB device number 7 using xhci_hcd
[256686.626881] Bluetooth: hci1: CSR: Local version failed (-110)
[256686.626950] usb 1-1: unable to read config index 0 descriptor/all
[256686.626957] usb 1-1: can't read configurations, error -110
[256686.627024] usb usb1-port1: attempt power cycle
[256687.046886] usb 1-1: new full-speed USB device number 8 using xhci_hcd
[256687.195551] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256687.915183] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256691.302331] usb 1-1: unable to read config index 0 descriptor/all
[256691.302341] usb 1-1: can't read configurations, error -71
[256691.634963] usb 1-1: new full-speed USB device number 9 using xhci_hcd
[256691.656981] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256691.656987] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256691.656989] usb 1-1: Product: ConBee II
[256691.656990] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256691.656991] usb 1-1: SerialNumber: DE2227330
[256691.657045] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256691.657058] No Local Variables are initialized for Method [_PLD]

[256691.657060] No Arguments are initialized for method [_PLD]

[256691.657062] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256691.658625] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256691.658638] No Local Variables are initialized for Method [_PLD]

[256691.658639] No Arguments are initialized for method [_PLD]

[256691.658641] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256691.658874] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256691.658914] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256691.658923] No Local Variables are initialized for Method [_PLD]

[256691.658924] No Arguments are initialized for method [_PLD]

[256691.658926] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256692.895339] usb 1-1: reset full-speed USB device number 9 using xhci_hcd
[256695.126046] usb 1-1: USB disconnect, device number 9
[256695.511034] usb 1-1: new full-speed USB device number 10 using xhci_hcd
[256696.759449] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256696.908831] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[256697.035493] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256699.202988] Bluetooth: hci1: command 0x1001 tx timeout
[256700.707102] usb 1-1: unable to read config index 0 descriptor/all
[256700.707111] usb 1-1: can't read configurations, error -110
[256700.834983] usb 1-1: new full-speed USB device number 11 using xhci_hcd
[256706.083057] usb 1-1: unable to read config index 0 descriptor/all
[256706.083066] usb 1-1: can't read configurations, error -110
[256706.083130] usb usb1-port1: attempt power cycle
[256706.494952] usb 1-1: new full-speed USB device number 12 using xhci_hcd
[256707.362952] Bluetooth: hci1: CSR: Local version failed (-110)
[256710.793676] usb 1-1: unable to read config index 0 descriptor/all
[256710.793687] usb 1-1: can't read configurations, error -71
[256711.126742] usb 1-1: new full-speed USB device number 13 using xhci_hcd
[256711.148259] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256711.148264] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256711.148266] usb 1-1: Product: ConBee II
[256711.148267] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256711.148268] usb 1-1: SerialNumber: DE2227330
[256711.148329] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256711.148345] No Local Variables are initialized for Method [_PLD]

[256711.148346] No Arguments are initialized for method [_PLD]

[256711.148348] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256711.149944] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256711.149956] No Local Variables are initialized for Method [_PLD]

[256711.149957] No Arguments are initialized for method [_PLD]

[256711.149959] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256711.150171] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256711.150204] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256711.150211] No Local Variables are initialized for Method [_PLD]

[256711.150213] No Arguments are initialized for method [_PLD]

[256711.150214] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256712.743394] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256713.439384] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256714.155338] usb 1-1: reset full-speed USB device number 13 using xhci_hcd
[256714.612712] usb 1-1: USB disconnect, device number 13
[256714.994799] usb 1-1: new full-speed USB device number 14 using xhci_hcd
[256715.727317] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256715.876698] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[256716.003375] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256718.178882] Bluetooth: hci1: command 0x1001 tx timeout
[256720.162982] usb 1-1: unable to read config index 0 descriptor/all
[256720.162992] usb 1-1: can't read configurations, error -110
[256720.290869] usb 1-1: new full-speed USB device number 15 using xhci_hcd
[256725.538978] usb 1-1: unable to read config index 0 descriptor/all
[256725.538987] usb 1-1: can't read configurations, error -110
[256725.539101] usb usb1-port1: attempt power cycle
[256725.950833] usb 1-1: new full-speed USB device number 16 using xhci_hcd
[256726.306845] Bluetooth: hci1: CSR: Local version failed (-110)
[256726.726939] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256727.451328] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256730.288218] usb 1-1: unable to read config index 0 descriptor/all
[256730.288228] usb 1-1: can't read configurations, error -71
[256730.622670] usb 1-1: new full-speed USB device number 17 using xhci_hcd
[256730.644569] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256730.644574] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256730.644575] usb 1-1: Product: ConBee II
[256730.644576] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256730.644578] usb 1-1: SerialNumber: DE2227330
[256730.644633] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256730.644646] No Local Variables are initialized for Method [_PLD]

[256730.644647] No Arguments are initialized for method [_PLD]

[256730.644649] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256730.646407] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256730.646418] No Local Variables are initialized for Method [_PLD]

[256730.646419] No Arguments are initialized for method [_PLD]

[256730.646420] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256730.646611] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256730.646657] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256730.646667] No Local Variables are initialized for Method [_PLD]

[256730.646668] No Arguments are initialized for method [_PLD]

[256730.646670] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256732.579226] usb 1-1: reset full-speed USB device number 17 using xhci_hcd
[256734.105597] usb 1-1: USB disconnect, device number 17
[256734.435278] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256734.584292] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[256734.710785] usb 1-1: new full-speed USB device number 18 using xhci_hcd
[256734.987158] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256735.153000] Bluetooth: hci1: urb 00000000dfadd662 failed to resubmit (2)
[256737.154766] Bluetooth: hci1: command 0x1001 tx timeout
[256739.874873] usb 1-1: unable to read config index 0 descriptor/all
[256739.874883] usb 1-1: can't read configurations, error -110
[256740.002751] usb 1-1: new full-speed USB device number 19 using xhci_hcd
[256745.250737] Bluetooth: hci1: CSR: Local version failed (-110)
[256745.251261] usb 1-1: unable to read config index 0 descriptor/all
[256745.251270] usb 1-1: can't read configurations, error -110
[256745.251343] usb usb1-port1: attempt power cycle
[256745.666556] usb 1-1: new full-speed USB device number 20 using xhci_hcd
[256749.785284] usb 1-1: unable to read config index 0 descriptor/all
[256749.785293] usb 1-1: can't read configurations, error -71
[256750.126558] usb 1-1: new full-speed USB device number 21 using xhci_hcd
[256750.148561] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256750.148566] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256750.148567] usb 1-1: Product: ConBee II
[256750.148569] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256750.148570] usb 1-1: SerialNumber: DE2227330
[256750.148623] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256750.148638] No Local Variables are initialized for Method [_PLD]

[256750.148639] No Arguments are initialized for method [_PLD]

[256750.148641] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256750.150385] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256750.150395] No Local Variables are initialized for Method [_PLD]

[256750.150397] No Arguments are initialized for method [_PLD]

[256750.150398] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256750.150606] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256750.150658] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256750.150668] No Local Variables are initialized for Method [_PLD]

[256750.150669] No Arguments are initialized for method [_PLD]

[256750.150671] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256750.619083] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256751.318894] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256752.035126] usb 1-1: reset full-speed USB device number 21 using xhci_hcd
[256753.606087] usb 1-1: USB disconnect, device number 21
[256753.970517] usb 1-1: new full-speed USB device number 22 using xhci_hcd
[256755.602972] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256755.752503] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[256755.879167] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256758.050644] Bluetooth: hci1: command 0x1001 tx timeout
[256759.330777] usb 1-1: unable to read config index 0 descriptor/all
[256759.330786] usb 1-1: can't read configurations, error -110
[256759.458634] usb 1-1: new full-speed USB device number 23 using xhci_hcd
[256764.706711] usb 1-1: unable to read config index 0 descriptor/all
[256764.706721] usb 1-1: can't read configurations, error -110
[256764.706848] usb usb1-port1: attempt power cycle
[256765.118603] usb 1-1: new full-speed USB device number 24 using xhci_hcd
[256766.242612] Bluetooth: hci1: CSR: Local version failed (-110)
[256769.290865] usb 1-1: unable to read config index 0 descriptor/all
[256769.290875] usb 1-1: can't read configurations, error -71
[256769.626524] usb 1-1: new full-speed USB device number 25 using xhci_hcd
[256769.648190] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256769.648196] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256769.648198] usb 1-1: Product: ConBee II
[256769.648199] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256769.648200] usb 1-1: SerialNumber: DE2227330
[256769.648254] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256769.648267] No Local Variables are initialized for Method [_PLD]

[256769.648268] No Arguments are initialized for method [_PLD]

[256769.648270] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256769.649811] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256769.649824] No Local Variables are initialized for Method [_PLD]

[256769.649825] No Arguments are initialized for method [_PLD]

[256769.649827] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256769.650023] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256769.650060] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256769.650068] No Local Variables are initialized for Method [_PLD]

[256769.650070] No Arguments are initialized for method [_PLD]

[256769.650071] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256771.611003] usb 1-2: reset full-speed USB device number 71 using xhci_hcd
[256772.311049] usb 1-3: reset full-speed USB device number 117 using xhci_hcd
[256773.018944] usb 1-1: reset full-speed USB device number 25 using xhci_hcd
[256773.146738] usb 1-1: Device not responding to setup address.
[256773.354666] usb 1-1: Device not responding to setup address.
[256773.562577] usb 1-1: device not accepting address 25, error -71
[256773.898556] usb 1-1: reset full-speed USB device number 25 using xhci_hcd
[256774.047460] usb 1-1: device firmware changed
[256774.047530] usb 1-1: USB disconnect, device number 25
[256774.174477] usb 1-1: new full-speed USB device number 26 using xhci_hcd
[256774.324468] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[256774.324474] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[256774.324476] usb 1-1: Product: ConBee II
[256774.324477] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[256774.324478] usb 1-1: SerialNumber: DE2227330
[256774.324528] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256774.324542] No Local Variables are initialized for Method [_PLD]

[256774.324543] No Arguments are initialized for method [_PLD]

[256774.324545] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256774.326172] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256774.326182] No Local Variables are initialized for Method [_PLD]

[256774.326184] No Arguments are initialized for method [_PLD]

[256774.326185] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[256774.327127] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[256774.327162] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[256774.327171] No Local Variables are initialized for Method [_PLD]

[256774.327172] No Arguments are initialized for method [_PLD]

[256774.327174] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[527633.792066] usb 1-2: USB disconnect, device number 71
[527636.673918] usb 1-2: new full-speed USB device number 27 using xhci_hcd
[527636.801934] usb 1-2: device descriptor read/64, error -71
[527637.042058] usb 1-2: device descriptor read/64, error -71
[527637.281947] usb 1-2: new full-speed USB device number 28 using xhci_hcd
[527637.409941] usb 1-2: device descriptor read/64, error -71
[527637.645977] usb 1-2: device descriptor read/64, error -71
[527637.753969] usb usb1-port2: attempt power cycle
[527638.373923] usb 1-2: new full-speed USB device number 29 using xhci_hcd
[527638.394704] usb 1-2: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
[527638.394710] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[527638.394765] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[527638.394779] No Local Variables are initialized for Method [_PLD]

[527638.394780] No Arguments are initialized for method [_PLD]

[527638.394782] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[527638.396354] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[527638.396370] No Local Variables are initialized for Method [_PLD]

[527638.396372] No Arguments are initialized for method [_PLD]

[527638.396375] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[527638.396558] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[527638.396601] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[527638.396611] No Local Variables are initialized for Method [_PLD]

[527638.396612] No Arguments are initialized for method [_PLD]

[527638.396614] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[527640.070523] usb 1-2: reset full-speed USB device number 29 using xhci_hcd
[528096.063064] usb 1-4: USB disconnect, device number 73
[528098.814399] usb 1-2: USB disconnect, device number 29
[528117.304703] usb 1-3: USB disconnect, device number 117
[528127.435401] usb 1-4: new high-speed USB device number 30 using xhci_hcd
[528127.584435] usb 1-4: New USB device found, idVendor=12d1, idProduct=1f01, bcdDevice= 1.02
[528127.584441] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[528127.584442] usb 1-4: Product: HUAWEI_MOBILE
[528127.584443] usb 1-4: Manufacturer: HUAWEI_MOBILE
[528127.584444] usb 1-4: SerialNumber: 0123456789ABCDEF
[528127.586102] usb-storage 1-4:1.0: USB Mass Storage device detected
[528127.586253] scsi host2: usb-storage 1-4:1.0
[528128.171921] usb 1-4: USB disconnect, device number 30
[528128.671329] usb 1-4: new high-speed USB device number 31 using xhci_hcd
[528128.828244] usb 1-4: New USB device found, idVendor=12d1, idProduct=1442, bcdDevice= 1.02
[528128.828250] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[528128.828252] usb 1-4: Product: HUAWEI_MOBILE
[528128.828253] usb 1-4: Manufacturer: HUAWEI_MOBILE
[528128.831112] option 1-4:1.0: GSM modem (1-port) converter detected
[528128.831213] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0
[528128.831458] usb-storage 1-4:1.1: USB Mass Storage device detected
[528128.831725] scsi host2: usb-storage 1-4:1.1
[528129.316692] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[528129.316707] option 1-4:1.0: device disconnected
[528129.607821] usb 1-4: reset high-speed USB device number 31 using xhci_hcd
[528131.607382] usb 1-2: new full-speed USB device number 32 using xhci_hcd
[528131.827143] usb 1-2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=82.41
[528131.827150] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[528131.827225] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[528131.827245] No Local Variables are initialized for Method [_PLD]

[528131.827246] No Arguments are initialized for method [_PLD]

[528131.827248] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[528131.829731] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[528131.829747] No Local Variables are initialized for Method [_PLD]

[528131.829748] No Arguments are initialized for method [_PLD]

[528131.829750] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[528131.830804] Bluetooth: hci1: unexpected event for opcode 0x0000
[528131.831184] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[528131.831198] No Local Variables are initialized for Method [_PLD]

[528131.831199] No Arguments are initialized for method [_PLD]

[528131.831201] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS02._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[528131.831866] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=6 rev=2031
[528131.831869] Bluetooth: hci1: LMP ver=6 subver=2031; manufacturer=10
[528133.339589] Bluetooth: hci1: urb 000000000bcff158 failed to resubmit (2)
[528133.607874] usb 1-2: reset full-speed USB device number 32 using xhci_hcd
[528144.887134] usb 1-3: new full-speed USB device number 33 using xhci_hcd
[528145.015319] usb 1-3: device descriptor read/64, error -71
[528145.251136] usb 1-3: device descriptor read/64, error -71
[528145.495208] usb 1-3: new full-speed USB device number 34 using xhci_hcd
[528145.623245] usb 1-3: device descriptor read/64, error -71
[528145.863311] usb 1-3: device descriptor read/64, error -71
[528145.975282] usb usb1-port3: attempt power cycle
[528146.595142] usb 1-3: new full-speed USB device number 35 using xhci_hcd
[528146.615971] usb 1-3: New USB device found, idVendor=0658, idProduct=0200, bcdDevice= 0.00
[528146.615976] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[528146.617934] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[528147.607556] usb 1-3: reset full-speed USB device number 35 using xhci_hcd
[959736.146856] usb 1-1: USB disconnect, device number 26
[959736.451823] usb 1-1: new full-speed USB device number 36 using xhci_hcd
[959736.605263] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[959736.605269] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[959736.605270] usb 1-1: Product: ConBee II
[959736.605272] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[959736.605273] usb 1-1: SerialNumber: DE2227330
[959736.605327] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959736.605341] No Local Variables are initialized for Method [_PLD]

[959736.605343] No Arguments are initialized for method [_PLD]

[959736.605344] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959736.606952] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959736.606961] No Local Variables are initialized for Method [_PLD]

[959736.606962] No Arguments are initialized for method [_PLD]

[959736.606964] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959736.607179] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[959736.607215] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959736.607226] No Local Variables are initialized for Method [_PLD]

[959736.607228] No Arguments are initialized for method [_PLD]

[959736.607229] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959738.436525] usb 1-1: reset full-speed USB device number 36 using xhci_hcd
[959739.972354] usb 1-1: USB disconnect, device number 36
[959740.284428] usb 1-3: reset full-speed USB device number 35 using xhci_hcd
[959740.433471] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[959740.559939] usb 1-1: new full-speed USB device number 37 using xhci_hcd
[959740.836427] usb 1-2: reset full-speed USB device number 32 using xhci_hcd
[959743.007931] Bluetooth: hci1: command 0x1001 tx timeout
[959745.792051] usb 1-1: unable to read config index 0 descriptor/all
[959745.792061] usb 1-1: can't read configurations, error -110
[959745.919927] usb 1-1: new full-speed USB device number 38 using xhci_hcd
[959751.167898] Bluetooth: hci1: CSR: Local version failed (-110)
[959751.167998] usb 1-1: unable to read config index 0 descriptor/all
[959751.168003] usb 1-1: can't read configurations, error -110
[959751.168126] usb usb1-port1: attempt power cycle
[959751.579733] usb 1-1: new full-speed USB device number 39 using xhci_hcd
[959751.728321] usb 1-3: reset full-speed USB device number 35 using xhci_hcd
[959752.432159] usb 1-2: reset full-speed USB device number 32 using xhci_hcd
[959755.617086] usb 1-1: unable to read config index 0 descriptor/all
[959755.617096] usb 1-1: can't read configurations, error -71
[959755.951671] usb 1-1: new full-speed USB device number 40 using xhci_hcd
[959755.973335] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[959755.973341] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[959755.973342] usb 1-1: Product: ConBee II
[959755.973343] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[959755.973345] usb 1-1: SerialNumber: DE2227330
[959755.973398] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959755.973412] No Local Variables are initialized for Method [_PLD]

[959755.973413] No Arguments are initialized for method [_PLD]

[959755.973415] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959755.974953] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959755.974964] No Local Variables are initialized for Method [_PLD]

[959755.974965] No Arguments are initialized for method [_PLD]

[959755.974967] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959755.975165] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[959755.975196] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959755.975204] No Local Variables are initialized for Method [_PLD]

[959755.975205] No Arguments are initialized for method [_PLD]

[959755.975206] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959757.436359] usb 1-1: reset full-speed USB device number 40 using xhci_hcd
[959759.439370] usb 1-1: USB disconnect, device number 40
[959759.783848] usb 1-1: new full-speed USB device number 41 using xhci_hcd
[959761.296306] usb 1-3: reset full-speed USB device number 35 using xhci_hcd
[959761.445534] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[959761.572245] usb 1-2: reset full-speed USB device number 32 using xhci_hcd
[959763.743798] Bluetooth: hci1: command 0x1001 tx timeout
[959764.991908] usb 1-1: unable to read config index 0 descriptor/all
[959764.991918] usb 1-1: can't read configurations, error -110
[959765.119795] usb 1-1: new full-speed USB device number 42 using xhci_hcd
[959770.367865] usb 1-1: unable to read config index 0 descriptor/all
[959770.367875] usb 1-1: can't read configurations, error -110
[959770.367996] usb usb1-port1: attempt power cycle
[959770.779766] usb 1-1: new full-speed USB device number 43 using xhci_hcd
[959771.903662] Bluetooth: hci1: CSR: Local version failed (-110)
[959772.324013] usb 1-3: reset full-speed USB device number 35 using xhci_hcd
[959773.028261] usb 1-2: reset full-speed USB device number 32 using xhci_hcd
[959775.100926] usb 1-1: unable to read config index 0 descriptor/all
[959775.100937] usb 1-1: can't read configurations, error -71
[959775.435579] usb 1-1: new full-speed USB device number 44 using xhci_hcd
[959775.457177] usb 1-1: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[959775.457183] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[959775.457185] usb 1-1: Product: ConBee II
[959775.457186] usb 1-1: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[959775.457188] usb 1-1: SerialNumber: DE2227330
[959775.457245] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959775.457260] No Local Variables are initialized for Method [_PLD]

[959775.457262] No Arguments are initialized for method [_PLD]

[959775.457264] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959775.458946] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959775.458967] No Local Variables are initialized for Method [_PLD]

[959775.458969] No Arguments are initialized for method [_PLD]

[959775.458971] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959775.459211] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[959775.459256] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20230331/psargs-330)

[959775.459267] No Local Variables are initialized for Method [_PLD]

[959775.459269] No Arguments are initialized for method [_PLD]

[959775.459270] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS01._PLD due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
[959776.175957] usb 1-1: reset full-speed USB device number 44 using xhci_hcd
[959778.923644] usb 1-1: USB disconnect, device number 44
[959779.307547] usb 1-1: new full-speed USB device number 45 using xhci_hcd
[959780.032123] usb 1-3: reset full-speed USB device number 35 using xhci_hcd
[959780.181453] cdc_acm 1-3:1.0: ttyACM0: USB ACM device
[959780.308222] usb 1-2: reset full-speed USB device number 32 using xhci_hcd
[959780.467287] Bluetooth: hci1: urb 00000000a4bf3fc1 failed to resubmit (2)
[959782.495706] Bluetooth: hci1: command 0x1001 tx timeout
[959784.703776] usb 1-1: unable to read config index 0 descriptor/all
[959784.703785] usb 1-1: can't read configurations, error -110
[959784.831675] usb 1-1: new full-speed USB device number 46 using xhci_hcd
[959790.079756] usb 1-1: unable to read config index 0 descriptor/all
[959790.079765] usb 1-1: can't read configurations, error -110
[959790.079827] usb usb1-port1: attempt power cycle
[959790.491640] usb 1-1: new full-speed USB device number 47 using xhci_hcd
[959790.591650] Bluetooth: hci1: CSR: Local version failed (-110)
[959791.015926] usb 1-3: reset full-speed USB device number 35 using xhci_hcd
[959791.715721] usb 1-2: reset full-speed USB device number 32 using xhci_hcd
[959800.831602] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command
[959800.831616] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
[959800.831633] xhci_hcd 0000:00:14.0: HC died; cleaning up
[959800.831682] usb 1-1: unable to read config index 0 descriptor/all
[959800.831685] usb 1-1: can't read configurations, error -110
[959800.831719] usb usb1-port1: couldn't allocate usb_device
[959800.831725] usb 1-2: USB disconnect, device number 32
[959800.832025] usb 1-3: USB disconnect, device number 35
[959800.832243] usb 1-4: USB disconnect, device number 31
[959800.832727] usb 1-5: USB disconnect, device number 2
[959800.833266] usb 1-6: USB disconnect, device number 3