[2025-07-30 13:33:16][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/kWh aujourdhui: requesting read
[2025-07-30 13:33:16][DEBUG] : send: 0x3f 0xfd 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x10 0x0 0x1
[2025-07-30 13:33:16][DEBUG] : recv: 0x3f 0xfd 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d old_data:  addr=None
[2025-07-30 13:33:16][DEBUG] : Processing: 0x3f 0xfd 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d
[2025-07-30 13:33:16][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[45], status=1) 
[2025-07-30 13:33:16][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:16][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4163
[2025-07-30 13:33:16][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4163
[2025-07-30 13:33:16][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4163': 45}
[2025-07-30 13:33:16][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:16][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4123
[2025-07-30 13:33:16][DEBUG] : Installation Solaire: 'one_cycle_read'/kWh hier: requesting read
[2025-07-30 13:33:16][DEBUG] : send: 0x3e 0x8b 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x12 0x0 0x1
[2025-07-30 13:33:16][DEBUG] : recv: 0x3e 0x8b 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33 old_data:  addr=None
[2025-07-30 13:33:16][DEBUG] : Processing: 0x3e 0x8b 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33
[2025-07-30 13:33:16][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[51], status=1) 
[2025-07-30 13:33:16][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:16][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4123
[2025-07-30 13:33:16][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4123
[2025-07-30 13:33:16][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4123': 51}
[2025-07-30 13:33:16][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' launched
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' treatment cmd_id = 4129
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read'/Output power: requesting read
[2025-07-30 13:33:17][DEBUG] : send: 0xbe 0xf2 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x17 0x0 0x2
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::cycle_ok': {'value': 1, 'eqId': '560'}}
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:17][DEBUG] : recv: 0xbe 0xf2 0x0 0x0 0x0 0x7 0xe3 0x3 0x4 0x0 0x15 0x0 0x0 old_data:  addr=None
[2025-07-30 13:33:17][DEBUG] : Processing: 0xbe 0xf2 0x0 0x0 0x0 0x7 0xe3 0x3 0x4 0x0 0x15 0x0 0x0
[2025-07-30 13:33:17][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[21, 0], status=1) 
[2025-07-30 13:33:17][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'process_read_response' launched for command id = 4129
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'cmd_decode' launched for command id = 4129
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::4129': 21}
[2025-07-30 13:33:17][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:17][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4165
[2025-07-30 13:33:17][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/kWh hier: requesting read
[2025-07-30 13:33:17][DEBUG] : send: 0x3f 0xfe 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x12 0x0 0x1
[2025-07-30 13:33:17][DEBUG] : recv: 0x3f 0xfe 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33 old_data:  addr=None
[2025-07-30 13:33:17][DEBUG] : Processing: 0x3f 0xfe 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33
[2025-07-30 13:33:17][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[51], status=1) 
[2025-07-30 13:33:17][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:17][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4165
[2025-07-30 13:33:17][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4165
[2025-07-30 13:33:17][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4165': 51}
[2025-07-30 13:33:17][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:17][DEBUG] : Installation Solaire: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:18][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' treatment cmd_id = 4133
[2025-07-30 13:33:18][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read'/AC Input: requesting read
[2025-07-30 13:33:18][DEBUG] : send: 0xbe 0xf3 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x34 0x0 0x1
[2025-07-30 13:33:18][DEBUG] : recv: 0xbe 0xf3 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x0 old_data:  addr=None
[2025-07-30 13:33:18][DEBUG] : Processing: 0xbe 0xf3 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x0
[2025-07-30 13:33:18][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[0], status=1) 
[2025-07-30 13:33:18][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:18][DEBUG] : 2x Multiplus II 48-3000: 'process_read_response' launched for command id = 4133
[2025-07-30 13:33:18][DEBUG] : 2x Multiplus II 48-3000: 'cmd_decode' launched for command id = 4133
[2025-07-30 13:33:18][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::4133': 0}
[2025-07-30 13:33:18][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:18][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4214
[2025-07-30 13:33:18][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/String Haut: requesting read
[2025-07-30 13:33:18][DEBUG] : send: 0x3f 0xff 0x0 0x0 0x0 0x6 0x64 0x3 0xe 0x8c 0x0 0x1
[2025-07-30 13:33:18][DEBUG] : recv: 0x3f 0xff 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0xa4 old_data:  addr=None
[2025-07-30 13:33:18][DEBUG] : Processing: 0x3f 0xff 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0xa4
[2025-07-30 13:33:18][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[164], status=1) 
[2025-07-30 13:33:18][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:18][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4214
[2025-07-30 13:33:18][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4214
[2025-07-30 13:33:18][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4214': 164}
[2025-07-30 13:33:18][DEBUG] : MyModbusd: Message received from MyModbusClient MPPT RS 450-100: {'add_change': {'values::4214': 164}}
[2025-07-30 13:33:18][DEBUG] : Try sending to jeedom: {'values': {'4214': 164}}
[2025-07-30 13:33:19][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' treatment cmd_id = 4135
[2025-07-30 13:33:19][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read'/ESS charge setpoint: requesting read
[2025-07-30 13:33:19][DEBUG] : send: 0xbe 0xf4 0x0 0x0 0x0 0x6 0x64 0x3 0xa 0x8c 0x0 0x1
[2025-07-30 13:33:19][DEBUG] : recv: 0xbe 0xf4 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x14 old_data:  addr=None
[2025-07-30 13:33:19][DEBUG] : Processing: 0xbe 0xf4 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x14
[2025-07-30 13:33:19][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[20], status=1) 
[2025-07-30 13:33:19][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:19][DEBUG] : 2x Multiplus II 48-3000: 'process_read_response' launched for command id = 4135
[2025-07-30 13:33:19][DEBUG] : 2x Multiplus II 48-3000: 'cmd_decode' launched for command id = 4135
[2025-07-30 13:33:19][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::4135': 20}
[2025-07-30 13:33:19][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:19][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4215
[2025-07-30 13:33:19][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/String bas: requesting read
[2025-07-30 13:33:19][DEBUG] : send: 0x40 0x0 0x0 0x0 0x0 0x6 0x64 0x3 0xe 0x8d 0x0 0x1
[2025-07-30 13:33:19][DEBUG] : recv: 0x40 0x0 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x9d old_data:  addr=None
[2025-07-30 13:33:19][DEBUG] : Processing: 0x40 0x0 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x9d
[2025-07-30 13:33:19][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[157], status=1) 
[2025-07-30 13:33:19][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:19][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4215
[2025-07-30 13:33:19][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4215
[2025-07-30 13:33:19][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4215': 157}
[2025-07-30 13:33:19][DEBUG] : MyModbusd: Message received from MyModbusClient MPPT RS 450-100: {'add_change': {'values::4215': 157}}
[2025-07-30 13:33:19][DEBUG] : Try sending to jeedom: {'values': {'4215': 157}}
[2025-07-30 13:33:20][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:20][DEBUG] : MPPT RS 450-100: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'one_cycle_read' launched
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4150
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/PV Power: requesting read
[2025-07-30 13:33:25][DEBUG] : send: 0x40 0x1 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x15 0x0 0x1
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::cycle_ok': {'value': 1, 'eqId': '561'}}
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:25][DEBUG] : recv: 0x40 0x1 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0xa 0x67 old_data:  addr=None
[2025-07-30 13:33:25][DEBUG] : Processing: 0x40 0x1 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0xa 0x67
[2025-07-30 13:33:25][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[2663], status=1) 
[2025-07-30 13:33:25][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4150
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4150
[2025-07-30 13:33:25][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4150': 2663}
[2025-07-30 13:33:25][DEBUG] : MyModbusd: Message received from MyModbusClient MPPT RS 450-100: {'add_change': {'values::4150': 2663}}
[2025-07-30 13:33:25][DEBUG] : Try sending to jeedom: {'values': {'4150': 2663}}
[2025-07-30 13:33:26][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4163
[2025-07-30 13:33:26][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/kWh aujourdhui: requesting read
[2025-07-30 13:33:26][DEBUG] : send: 0x40 0x2 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x10 0x0 0x1
[2025-07-30 13:33:26][DEBUG] : recv: 0x40 0x2 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d old_data:  addr=None
[2025-07-30 13:33:26][DEBUG] : Processing: 0x40 0x2 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d
[2025-07-30 13:33:26][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[45], status=1) 
[2025-07-30 13:33:26][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:26][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4163
[2025-07-30 13:33:26][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4163
[2025-07-30 13:33:26][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4163': 45}
[2025-07-30 13:33:26][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' launched
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' treatment cmd_id = 4129
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read'/Output power: requesting read
[2025-07-30 13:33:27][DEBUG] : send: 0xbe 0xf5 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x17 0x0 0x2
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::cycle_ok': {'value': 1, 'eqId': '560'}}
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:27][DEBUG] : recv: 0xbe 0xf5 0x0 0x0 0x0 0x7 0xe3 0x3 0x4 0x0 0x15 0x0 0x0 old_data:  addr=None
[2025-07-30 13:33:27][DEBUG] : Processing: 0xbe 0xf5 0x0 0x0 0x0 0x7 0xe3 0x3 0x4 0x0 0x15 0x0 0x0
[2025-07-30 13:33:27][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[21, 0], status=1) 
[2025-07-30 13:33:27][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'process_read_response' launched for command id = 4129
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'cmd_decode' launched for command id = 4129
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::4129': 21}
[2025-07-30 13:33:27][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:27][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4165
[2025-07-30 13:33:27][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/kWh hier: requesting read
[2025-07-30 13:33:27][DEBUG] : send: 0x40 0x3 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x12 0x0 0x1
[2025-07-30 13:33:27][DEBUG] : recv: 0x40 0x3 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33 old_data:  addr=None
[2025-07-30 13:33:27][DEBUG] : Processing: 0x40 0x3 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33
[2025-07-30 13:33:27][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[51], status=1) 
[2025-07-30 13:33:27][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:27][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4165
[2025-07-30 13:33:27][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4165
[2025-07-30 13:33:27][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4165': 51}
[2025-07-30 13:33:27][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'one_cycle_read' launched
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 3483
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'one_cycle_read'/SOC Batterie: requesting read
[2025-07-30 13:33:27][DEBUG] : send: 0x3e 0x8c 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x4b 0x0 0x1
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::cycle_ok': {'value': 1, 'eqId': '525'}, 'values::cycle_time': {'value': 10.04807406180189, 'eqId': '525'}}
[2025-07-30 13:33:27][DEBUG] : MyModbusd: Message received from MyModbusClient Installation Solaire: {'add_change': {'values::cycle_time': {'value': 10.04807406180189, 'eqId': '525'}}}
[2025-07-30 13:33:27][DEBUG] : recv: 0x3e 0x8c 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x64 old_data:  addr=None
[2025-07-30 13:33:27][DEBUG] : Processing: 0x3e 0x8c 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x64
[2025-07-30 13:33:27][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[100], status=1) 
[2025-07-30 13:33:27][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 3483
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 3483
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::3483': 100}
[2025-07-30 13:33:27][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:28][DEBUG] : Try sending to jeedom: {'values': {'cycle_time': {'value': 10.04807406180189, 'eqId': '525'}}}
[2025-07-30 13:33:28][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' treatment cmd_id = 4133
[2025-07-30 13:33:28][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read'/AC Input: requesting read
[2025-07-30 13:33:28][DEBUG] : send: 0xbe 0xf6 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x34 0x0 0x1
[2025-07-30 13:33:28][DEBUG] : recv: 0xbe 0xf6 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x0 old_data:  addr=None
[2025-07-30 13:33:28][DEBUG] : Processing: 0xbe 0xf6 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x0
[2025-07-30 13:33:28][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[0], status=1) 
[2025-07-30 13:33:28][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:28][DEBUG] : 2x Multiplus II 48-3000: 'process_read_response' launched for command id = 4133
[2025-07-30 13:33:28][DEBUG] : 2x Multiplus II 48-3000: 'cmd_decode' launched for command id = 4133
[2025-07-30 13:33:28][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::4133': 0}
[2025-07-30 13:33:28][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:28][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4214
[2025-07-30 13:33:28][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/String Haut: requesting read
[2025-07-30 13:33:28][DEBUG] : send: 0x40 0x4 0x0 0x0 0x0 0x6 0x64 0x3 0xe 0x8c 0x0 0x1
[2025-07-30 13:33:28][DEBUG] : recv: 0x40 0x4 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x79 old_data:  addr=None
[2025-07-30 13:33:28][DEBUG] : Processing: 0x40 0x4 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x79
[2025-07-30 13:33:28][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[121], status=1) 
[2025-07-30 13:33:28][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:28][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4214
[2025-07-30 13:33:28][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4214
[2025-07-30 13:33:28][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4214': 121}
[2025-07-30 13:33:28][DEBUG] : MyModbusd: Message received from MyModbusClient MPPT RS 450-100: {'add_change': {'values::4214': 121}}
[2025-07-30 13:33:28][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 3485
[2025-07-30 13:33:28][DEBUG] : Installation Solaire: 'one_cycle_read'/PV Power: requesting read
[2025-07-30 13:33:28][DEBUG] : send: 0x3e 0x8d 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x15 0x0 0x1
[2025-07-30 13:33:28][DEBUG] : recv: 0x3e 0x8d 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x9 0x5 old_data:  addr=None
[2025-07-30 13:33:28][DEBUG] : Processing: 0x3e 0x8d 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x9 0x5
[2025-07-30 13:33:28][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[2309], status=1) 
[2025-07-30 13:33:28][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:28][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 3485
[2025-07-30 13:33:28][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 3485
[2025-07-30 13:33:28][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::3485': 2309}
[2025-07-30 13:33:28][DEBUG] : MyModbusd: Message received from MyModbusClient Installation Solaire: {'add_change': {'values::3485': 2309}}
[2025-07-30 13:33:29][DEBUG] : Try sending to jeedom: {'values': {'4214': 121, '3485': 2309}}
[2025-07-30 13:33:29][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' treatment cmd_id = 4135
[2025-07-30 13:33:29][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read'/ESS charge setpoint: requesting read
[2025-07-30 13:33:29][DEBUG] : send: 0xbe 0xf7 0x0 0x0 0x0 0x6 0x64 0x3 0xa 0x8c 0x0 0x1
[2025-07-30 13:33:29][DEBUG] : recv: 0xbe 0xf7 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x14 old_data:  addr=None
[2025-07-30 13:33:29][DEBUG] : Processing: 0xbe 0xf7 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x14
[2025-07-30 13:33:29][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[20], status=1) 
[2025-07-30 13:33:29][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:29][DEBUG] : 2x Multiplus II 48-3000: 'process_read_response' launched for command id = 4135
[2025-07-30 13:33:29][DEBUG] : 2x Multiplus II 48-3000: 'cmd_decode' launched for command id = 4135
[2025-07-30 13:33:29][DEBUG] : 2x Multiplus II 48-3000: 'add_change' launched with payload = {'values::4135': 20}
[2025-07-30 13:33:29][DEBUG] : 2x Multiplus II 48-3000: 'add_change' No modification to send
[2025-07-30 13:33:29][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4215
[2025-07-30 13:33:29][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/String bas: requesting read
[2025-07-30 13:33:29][DEBUG] : send: 0x40 0x5 0x0 0x0 0x0 0x6 0x64 0x3 0xe 0x8d 0x0 0x1
[2025-07-30 13:33:29][DEBUG] : recv: 0x40 0x5 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x71 old_data:  addr=None
[2025-07-30 13:33:29][DEBUG] : Processing: 0x40 0x5 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x71
[2025-07-30 13:33:29][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[113], status=1) 
[2025-07-30 13:33:29][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:29][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4215
[2025-07-30 13:33:29][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4215
[2025-07-30 13:33:29][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4215': 113}
[2025-07-30 13:33:29][DEBUG] : MyModbusd: Message received from MyModbusClient MPPT RS 450-100: {'add_change': {'values::4215': 113}}
[2025-07-30 13:33:29][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4114
[2025-07-30 13:33:29][DEBUG] : Installation Solaire: 'one_cycle_read'/Output power: requesting read
[2025-07-30 13:33:29][DEBUG] : send: 0x3e 0x8e 0x0 0x0 0x0 0x6 0xe3 0x3 0x0 0x17 0x0 0x2
[2025-07-30 13:33:29][DEBUG] : recv: 0x3e 0x8e 0x0 0x0 0x0 0x7 0xe3 0x3 0x4 0x0 0x15 0x0 0x0 old_data:  addr=None
[2025-07-30 13:33:29][DEBUG] : Processing: 0x3e 0x8e 0x0 0x0 0x0 0x7 0xe3 0x3 0x4 0x0 0x15 0x0 0x0
[2025-07-30 13:33:29][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[21, 0], status=1) 
[2025-07-30 13:33:29][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:29][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4114
[2025-07-30 13:33:29][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4114
[2025-07-30 13:33:29][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4114': 21}
[2025-07-30 13:33:29][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read' launched
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read' treatment cmd_id = 4171
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read'/SOC Batterie: requesting read
[2025-07-30 13:33:29][DEBUG] : send: 0x93 0xb0 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x4b 0x0 0x1
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' launched with payload = {'values::cycle_ok': {'value': 1, 'eqId': '562'}}
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' No modification to send
[2025-07-30 13:33:29][DEBUG] : recv: 0x93 0xb0 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x64 old_data:  addr=None
[2025-07-30 13:33:29][DEBUG] : Processing: 0x93 0xb0 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x64
[2025-07-30 13:33:29][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[100], status=1) 
[2025-07-30 13:33:29][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'process_read_response' launched for command id = 4171
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'cmd_decode' launched for command id = 4171
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' launched with payload = {'values::4171': 100}
[2025-07-30 13:33:29][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' No modification to send
[2025-07-30 13:33:30][DEBUG] : Try sending to jeedom: {'values': {'4215': 113}}
[2025-07-30 13:33:30][DEBUG] : 2x Multiplus II 48-3000: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:30][DEBUG] : MPPT RS 450-100: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:30][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4117
[2025-07-30 13:33:30][DEBUG] : Installation Solaire: 'one_cycle_read'/Charge batterie: requesting read
[2025-07-30 13:33:30][DEBUG] : send: 0x3e 0x8f 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x4a 0x0 0x1
[2025-07-30 13:33:30][DEBUG] : recv: 0x3e 0x8f 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x78 old_data:  addr=None
[2025-07-30 13:33:30][DEBUG] : Processing: 0x3e 0x8f 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x78
[2025-07-30 13:33:30][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[120], status=1) 
[2025-07-30 13:33:30][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:30][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4117
[2025-07-30 13:33:30][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4117
[2025-07-30 13:33:30][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4117': 120}
[2025-07-30 13:33:30][DEBUG] : MyModbusd: Message received from MyModbusClient Installation Solaire: {'add_change': {'values::4117': 120}}
[2025-07-30 13:33:30][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read' treatment cmd_id = 4175
[2025-07-30 13:33:30][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read'/Charge batterie: requesting read
[2025-07-30 13:33:30][DEBUG] : send: 0x93 0xb1 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x4a 0x0 0x1
[2025-07-30 13:33:30][DEBUG] : recv: 0x93 0xb1 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x78 old_data:  addr=None
[2025-07-30 13:33:30][DEBUG] : Processing: 0x93 0xb1 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x78
[2025-07-30 13:33:30][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[120], status=1) 
[2025-07-30 13:33:30][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:30][DEBUG] : Pylontech US3000C 296 Ah: 'process_read_response' launched for command id = 4175
[2025-07-30 13:33:30][DEBUG] : Pylontech US3000C 296 Ah: 'cmd_decode' launched for command id = 4175
[2025-07-30 13:33:30][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' launched with payload = {'values::4175': 120}
[2025-07-30 13:33:30][DEBUG] : MyModbusd: Message received from MyModbusClient Pylontech US3000C 296 Ah: {'add_change': {'values::4175': 120}}
[2025-07-30 13:33:31][DEBUG] : Try sending to jeedom: {'values': {'4117': 120, '4175': 120}}
[2025-07-30 13:33:31][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4118
[2025-07-30 13:33:31][DEBUG] : Installation Solaire: 'one_cycle_read'/AC Input: requesting read
[2025-07-30 13:33:31][DEBUG] : send: 0x3e 0x90 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x34 0x0 0x1
[2025-07-30 13:33:31][DEBUG] : recv: 0x3e 0x90 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x0 old_data:  addr=None
[2025-07-30 13:33:31][DEBUG] : Processing: 0x3e 0x90 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x0
[2025-07-30 13:33:31][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[0], status=1) 
[2025-07-30 13:33:31][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:31][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4118
[2025-07-30 13:33:31][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4118
[2025-07-30 13:33:31][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4118': 0}
[2025-07-30 13:33:31][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:31][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read' treatment cmd_id = 4181
[2025-07-30 13:33:31][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read'/SOH batterie: requesting read
[2025-07-30 13:33:31][DEBUG] : send: 0x93 0xb2 0x0 0x0 0x0 0x6 0xe1 0x3 0x1 0x30 0x0 0x1
[2025-07-30 13:33:31][DEBUG] : recv: 0x93 0xb2 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x3 0xde old_data:  addr=None
[2025-07-30 13:33:31][DEBUG] : Processing: 0x93 0xb2 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x3 0xde
[2025-07-30 13:33:31][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[990], status=1) 
[2025-07-30 13:33:31][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:31][DEBUG] : Pylontech US3000C 296 Ah: 'process_read_response' launched for command id = 4181
[2025-07-30 13:33:31][DEBUG] : Pylontech US3000C 296 Ah: 'cmd_decode' launched for command id = 4181
[2025-07-30 13:33:31][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' launched with payload = {'values::4181': 990}
[2025-07-30 13:33:31][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' No modification to send
[2025-07-30 13:33:32][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4119
[2025-07-30 13:33:32][DEBUG] : Installation Solaire: 'one_cycle_read'/ESS charge setpoint: requesting read
[2025-07-30 13:33:32][DEBUG] : send: 0x3e 0x91 0x0 0x0 0x0 0x6 0x64 0x3 0xa 0x8c 0x0 0x1
[2025-07-30 13:33:32][DEBUG] : recv: 0x3e 0x91 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x14 old_data:  addr=None
[2025-07-30 13:33:32][DEBUG] : Processing: 0x3e 0x91 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x14
[2025-07-30 13:33:32][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[20], status=1) 
[2025-07-30 13:33:32][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:32][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4119
[2025-07-30 13:33:32][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4119
[2025-07-30 13:33:32][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4119': 20}
[2025-07-30 13:33:32][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:32][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read' treatment cmd_id = 4183
[2025-07-30 13:33:32][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read'/Température batterie: requesting read
[2025-07-30 13:33:32][DEBUG] : send: 0x93 0xb3 0x0 0x0 0x0 0x6 0xe1 0x3 0x1 0x6 0x0 0x1
[2025-07-30 13:33:32][DEBUG] : recv: 0x93 0xb3 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x0 0xee old_data:  addr=None
[2025-07-30 13:33:32][DEBUG] : Processing: 0x93 0xb3 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x0 0xee
[2025-07-30 13:33:32][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[238], status=1) 
[2025-07-30 13:33:32][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:32][DEBUG] : Pylontech US3000C 296 Ah: 'process_read_response' launched for command id = 4183
[2025-07-30 13:33:32][DEBUG] : Pylontech US3000C 296 Ah: 'cmd_decode' launched for command id = 4183
[2025-07-30 13:33:32][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' launched with payload = {'values::4183': 238}
[2025-07-30 13:33:32][DEBUG] : Pylontech US3000C 296 Ah: 'add_change' No modification to send
[2025-07-30 13:33:33][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4120
[2025-07-30 13:33:33][DEBUG] : Installation Solaire: 'one_cycle_read'/SOH batterie: requesting read
[2025-07-30 13:33:33][DEBUG] : send: 0x3e 0x92 0x0 0x0 0x0 0x6 0xe1 0x3 0x1 0x30 0x0 0x1
[2025-07-30 13:33:33][DEBUG] : recv: 0x3e 0x92 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x3 0xde old_data:  addr=None
[2025-07-30 13:33:33][DEBUG] : Processing: 0x3e 0x92 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x3 0xde
[2025-07-30 13:33:33][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[990], status=1) 
[2025-07-30 13:33:33][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:33][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4120
[2025-07-30 13:33:33][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4120
[2025-07-30 13:33:33][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4120': 990}
[2025-07-30 13:33:33][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:33][DEBUG] : Pylontech US3000C 296 Ah: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:34][DEBUG] : Received new message on socket
[2025-07-30 13:33:34][DEBUG] : Close connection
[2025-07-30 13:33:34][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'quit', 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-07-30T13:33:34+02:00'}'''
[2025-07-30 13:33:34][INFO] : MyModbusd: Command 'quit' received from jeedom: exiting
[2025-07-30 13:33:34][DEBUG] : 2x Multiplus II 48-3000: 'read_downstream' Message received from daemon: {'quit': None}
[2025-07-30 13:33:34][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4121
[2025-07-30 13:33:34][DEBUG] : Installation Solaire: 'one_cycle_read'/Température batterie: requesting read
[2025-07-30 13:33:34][DEBUG] : send: 0x3e 0x93 0x0 0x0 0x0 0x6 0xe1 0x3 0x1 0x6 0x0 0x1
[2025-07-30 13:33:34][DEBUG] : recv: 0x3e 0x93 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x0 0xee old_data:  addr=None
[2025-07-30 13:33:34][DEBUG] : Processing: 0x3e 0x93 0x0 0x0 0x0 0x5 0xe1 0x3 0x2 0x0 0xee
[2025-07-30 13:33:34][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[238], status=1) 
[2025-07-30 13:33:34][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:34][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4121
[2025-07-30 13:33:34][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4121
[2025-07-30 13:33:34][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4121': 238}
[2025-07-30 13:33:34][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'one_cycle_read' launched
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4150
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/PV Power: requesting read
[2025-07-30 13:33:35][DEBUG] : send: 0x40 0x6 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x15 0x0 0x1
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::cycle_ok': {'value': 1, 'eqId': '561'}}
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:35][DEBUG] : recv: 0x40 0x6 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x7 0x4f old_data:  addr=None
[2025-07-30 13:33:35][DEBUG] : Processing: 0x40 0x6 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x7 0x4f
[2025-07-30 13:33:35][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[1871], status=1) 
[2025-07-30 13:33:35][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4150
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4150
[2025-07-30 13:33:35][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4150': 1871}
[2025-07-30 13:33:35][DEBUG] : MyModbusd: Message received from MyModbusClient MPPT RS 450-100: {'add_change': {'values::4150': 1871}}
[2025-07-30 13:33:35][DEBUG] : Try sending to jeedom: {'values': {'4150': 1871}}
[2025-07-30 13:33:35][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4122
[2025-07-30 13:33:35][DEBUG] : Installation Solaire: 'one_cycle_read'/kWh aujourdhui: requesting read
[2025-07-30 13:33:35][DEBUG] : send: 0x3e 0x94 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x10 0x0 0x1
[2025-07-30 13:33:35][DEBUG] : recv: 0x3e 0x94 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d old_data:  addr=None
[2025-07-30 13:33:35][DEBUG] : Processing: 0x3e 0x94 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d
[2025-07-30 13:33:35][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[45], status=1) 
[2025-07-30 13:33:35][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:35][DEBUG] : Installation Solaire: 'process_read_response' launched for command id = 4122
[2025-07-30 13:33:35][DEBUG] : Installation Solaire: 'cmd_decode' launched for command id = 4122
[2025-07-30 13:33:35][DEBUG] : Installation Solaire: 'add_change' launched with payload = {'values::4122': 45}
[2025-07-30 13:33:35][DEBUG] : Installation Solaire: 'add_change' No modification to send
[2025-07-30 13:33:36][DEBUG] : 2x Multiplus II 48-3000: 'run_loop' cancelled
[2025-07-30 13:33:36][DEBUG] : 2x Multiplus II 48-3000: 'run_loop' exit
[2025-07-30 13:33:36][INFO] : 2x Multiplus II 48-3000: Modbus communication closed
[2025-07-30 13:33:36][DEBUG] : 2x Multiplus II 48-3000: 'read_downstream' exit
[2025-07-30 13:33:36][DEBUG] : MyModbusd: 'read_upstream' for 2x Multiplus II 48-3000 (id = 560) cancelled
[2025-07-30 13:33:36][DEBUG] : MyModbusd: 'read_upstream' exit for 2x Multiplus II 48-3000 (id = 560)
[2025-07-30 13:33:36][DEBUG] : Installation Solaire: 'read_downstream' Message received from daemon: {'quit': None}
[2025-07-30 13:33:36][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4163
[2025-07-30 13:33:36][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/kWh aujourdhui: requesting read
[2025-07-30 13:33:36][DEBUG] : send: 0x40 0x7 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x10 0x0 0x1
[2025-07-30 13:33:36][DEBUG] : recv: 0x40 0x7 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d old_data:  addr=None
[2025-07-30 13:33:36][DEBUG] : Processing: 0x40 0x7 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x2d
[2025-07-30 13:33:36][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[45], status=1) 
[2025-07-30 13:33:36][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:36][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4163
[2025-07-30 13:33:36][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4163
[2025-07-30 13:33:36][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4163': 45}
[2025-07-30 13:33:36][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:36][DEBUG] : Installation Solaire: 'one_cycle_read' treatment cmd_id = 4123
[2025-07-30 13:33:36][DEBUG] : Installation Solaire: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:37][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4165
[2025-07-30 13:33:37][DEBUG] : MPPT RS 450-100: 'one_cycle_read'/kWh hier: requesting read
[2025-07-30 13:33:37][DEBUG] : send: 0x40 0x8 0x0 0x0 0x0 0x6 0x64 0x3 0x3 0x12 0x0 0x1
[2025-07-30 13:33:37][DEBUG] : recv: 0x40 0x8 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33 old_data:  addr=None
[2025-07-30 13:33:37][DEBUG] : Processing: 0x40 0x8 0x0 0x0 0x0 0x5 0x64 0x3 0x2 0x0 0x33
[2025-07-30 13:33:37][DEBUG] : decoded PDU function_code(3 sub -1) -> ReadHoldingRegistersResponse(dev_id=0, transaction_id=0, address=0, count=0, bits=[], registers=[51], status=1) 
[2025-07-30 13:33:37][DEBUG] : Frame advanced, resetting header!!
[2025-07-30 13:33:37][DEBUG] : MPPT RS 450-100: 'process_read_response' launched for command id = 4165
[2025-07-30 13:33:37][DEBUG] : MPPT RS 450-100: 'cmd_decode' launched for command id = 4165
[2025-07-30 13:33:37][DEBUG] : MPPT RS 450-100: 'add_change' launched with payload = {'values::4165': 51}
[2025-07-30 13:33:37][DEBUG] : MPPT RS 450-100: 'add_change' No modification to send
[2025-07-30 13:33:38][DEBUG] : Installation Solaire: 'run_loop' cancelled
[2025-07-30 13:33:38][DEBUG] : Installation Solaire: 'run_loop' exit
[2025-07-30 13:33:38][INFO] : Installation Solaire: Modbus communication closed
[2025-07-30 13:33:38][DEBUG] : Installation Solaire: 'read_downstream' exit
[2025-07-30 13:33:38][DEBUG] : MyModbusd: 'read_upstream' for Installation Solaire (id = 525) cancelled
[2025-07-30 13:33:38][DEBUG] : MyModbusd: 'read_upstream' exit for Installation Solaire (id = 525)
[2025-07-30 13:33:38][DEBUG] : MPPT RS 450-100: 'read_downstream' Message received from daemon: {'quit': None}
[2025-07-30 13:33:38][DEBUG] : MPPT RS 450-100: 'one_cycle_read' treatment cmd_id = 4214
[2025-07-30 13:33:38][DEBUG] : MPPT RS 450-100: 'one_cycle_read' exit with error_or_exception = False
[2025-07-30 13:33:40][DEBUG] : MPPT RS 450-100: 'run_loop' cancelled
[2025-07-30 13:33:40][DEBUG] : MPPT RS 450-100: 'run_loop' exit
[2025-07-30 13:33:40][INFO] : MPPT RS 450-100: Modbus communication closed
[2025-07-30 13:33:40][DEBUG] : MPPT RS 450-100: 'read_downstream' exit
[2025-07-30 13:33:40][DEBUG] : MyModbusd: 'read_upstream' for MPPT RS 450-100 (id = 561) cancelled
[2025-07-30 13:33:40][DEBUG] : MyModbusd: 'read_upstream' exit for MPPT RS 450-100 (id = 561)
[2025-07-30 13:33:40][DEBUG] : Pylontech US3000C 296 Ah: 'read_downstream' Message received from daemon: {'quit': None}
[2025-07-30 13:33:42][DEBUG] : Pylontech US3000C 296 Ah: 'run_loop' cancelled
[2025-07-30 13:33:42][DEBUG] : Pylontech US3000C 296 Ah: 'run_loop' exit
[2025-07-30 13:33:42][INFO] : Pylontech US3000C 296 Ah: Modbus communication closed
[2025-07-30 13:33:42][DEBUG] : Pylontech US3000C 296 Ah: 'read_downstream' exit
[2025-07-30 13:33:42][DEBUG] : MyModbusd: 'read_upstream' for Pylontech US3000C 296 Ah (id = 562) cancelled
[2025-07-30 13:33:42][DEBUG] : MyModbusd: 'read_upstream' exit for Pylontech US3000C 296 Ah (id = 562)
[2025-07-30 13:33:42][INFO] : Cancelling 3 tasks
[2025-07-30 13:33:42][INFO] : Listening cancelled
[2025-07-30 13:33:42][INFO] : Send async cancelled
[2025-07-30 13:33:42][INFO] : Shutdown
[2025-07-30 13:33:42][DEBUG] : Removing PID file /tmp/jeedom/mymodbus/daemon.pid
[2025-07-30 13:33:42][DEBUG] : Exit 0
[2025-07-30 13:35:41][INFO] : Starting daemon (lib version 1.2.9) with log level: debug
[2025-07-30 13:35:41][DEBUG] : Writing PID 531600 to /tmp/jeedom/mymodbus/daemon.pid
[2025-07-30 13:35:41][INFO] : Listening on 127.0.0.1:55502
[2025-07-30 13:35:42][DEBUG] : Received new message on socket
[2025-07-30 13:35:42][INFO] : Send async started with a cycle of 0.5s
[2025-07-30 13:35:42][DEBUG] : Close connection
[2025-07-30 13:35:42][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'newDaemonConfig', 'config': [{'id': '560', 'name': '2x Multiplus II 48-3000', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '4129', 'name': 'Output power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'i', 'cmdAddress': '23', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4133', 'name': 'AC Input', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '820', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4135', 'name': 'ESS charge setpoint', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}, {'id': '525', 'name': 'Installation Solaire', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '3483', 'name': 'SOC Batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '843', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3485', 'name': 'PV Power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '789', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4114', 'name': 'Output power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'i', 'cmdAddress': '23', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4117', 'name': 'Charge batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '842', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3487', 'name': '0W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4118', 'name': 'AC Input', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '820', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4119', 'name': 'ESS charge setpoint', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3488', 'name': '400W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4120', 'name': 'SOH batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '304', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4121', 'name': 'Température batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '262', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3496', 'name': '500W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4122', 'name': 'kWh aujourdhui', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '784', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4123', 'name': 'kWh hier', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '786', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3497', 'name': '600W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3498', 'name': '800W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3518', 'name': '100W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3519', 'name': '1200W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3887', 'name': 'Auto', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4194', 'name': 'Injection 100W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4195', 'name': '2000W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}, {'id': '561', 'name': 'MPPT RS 450-100', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '4150', 'name': 'PV Power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '789', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4163', 'name': 'kWh aujourdhui', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '784', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4165', 'name': 'kWh hier', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '786', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4214', 'name': 'String Haut', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '3724', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4215', 'name': 'String bas', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '3725', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}, {'id': '562', 'name': 'Pylontech US3000C 296 Ah', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '4171', 'name': 'SOC Batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '843', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4175', 'name': 'Charge batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '842', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4181', 'name': 'SOH batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '304', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4183', 'name': 'Température batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '262', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}], 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-07-30T13:35:42+02:00'}'''
[2025-07-30 13:35:42][INFO] : MyModbusd: Command 'newDaemonConfig' received from jeedom: sending the new config to all MyModbusClients
[2025-07-30 13:35:42][INFO] : MyModbusd: 'manage_new_config' Starting equipment 2x Multiplus II 48-3000 (id 560)
[2025-07-30 13:35:42][INFO] : MyModbusd: 'manage_new_config' Starting equipment Installation Solaire (id 525)
[2025-07-30 13:35:42][INFO] : MyModbusd: 'manage_new_config' Starting equipment MPPT RS 450-100 (id 561)
[2025-07-30 13:35:42][INFO] : MyModbusd: 'manage_new_config' Starting equipment Pylontech US3000C 296 Ah (id 562)
[2025-07-30 13:35:42][DEBUG] : 2x Multiplus II 48-3000: 'read_eqConfig' client params for 2x Multiplus II 48-3000: {'name': '2x Multiplus II 48-3000', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f88f6fb50>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-07-30 13:35:42][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-8' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-07-30 13:35:42][DEBUG] : Installation Solaire: 'read_eqConfig' client params for Installation Solaire: {'name': 'Installation Solaire', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f88f6fc10>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-07-30 13:35:42][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-9' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-07-30 13:35:42][DEBUG] : MPPT RS 450-100: 'read_eqConfig' client params for MPPT RS 450-100: {'name': 'MPPT RS 450-100', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f88f6fb10>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-07-30 13:35:42][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-10' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-07-30 13:35:42][DEBUG] : Pylontech US3000C 296 Ah: 'read_eqConfig' client params for Pylontech US3000C 296 Ah: {'name': 'Pylontech US3000C 296 Ah', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f88f6fa90>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-07-30 13:35:42][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-11' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-07-30 13:35:42][DEBUG] : 2x Multiplus II 48-3000: 'read_downstream' launched
[2025-07-30 13:35:42][DEBUG] : MyModbusd: 'read_upstream' run for 2x Multiplus II 48-3000 (id = 560)
[2025-07-30 13:35:42][DEBUG] : Installation Solaire: 'read_downstream' launched
[2025-07-30 13:35:42][DEBUG] : MyModbusd: 'read_upstream' run for Installation Solaire (id = 525)
[2025-07-30 13:35:42][DEBUG] : MPPT RS 450-100: 'read_downstream' launched
[2025-07-30 13:35:42][DEBUG] : MyModbusd: 'read_upstream' run for MPPT RS 450-100 (id = 561)
[2025-07-30 13:35:42][DEBUG] : Pylontech US3000C 296 Ah: 'read_downstream' launched
[2025-07-30 13:35:42][DEBUG] : MyModbusd: 'read_upstream' run for Pylontech US3000C 296 Ah (id = 562)
[2025-07-31 06:00:05][DEBUG] : Received new message on socket
[2025-07-31 06:00:05][DEBUG] : Close connection
[2025-07-31 06:00:05][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'write', 'write_cmd': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}, 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-07-31T06:00:05+02:00'}'''
[2025-07-31 06:00:05][INFO] : MyModbusd: Command 'write' received from jeedom: sending the command to MyModbusClient 525: {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}
[2025-07-31 06:00:05][ERROR] : MyModbusd: No MyModbusClient instance has been started yet for the given equipment ID: {'write': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}}
[2025-08-01 06:00:06][DEBUG] : Received new message on socket
[2025-08-01 06:00:06][DEBUG] : Close connection
[2025-08-01 06:00:06][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'write', 'write_cmd': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}, 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-08-01T06:00:05+02:00'}'''
[2025-08-01 06:00:06][INFO] : MyModbusd: Command 'write' received from jeedom: sending the command to MyModbusClient 525: {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}
[2025-08-01 06:00:06][ERROR] : MyModbusd: No MyModbusClient instance has been started yet for the given equipment ID: {'write': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}}
[2025-08-02 06:00:03][DEBUG] : Received new message on socket
[2025-08-02 06:00:03][DEBUG] : Close connection
[2025-08-02 06:00:03][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'write', 'write_cmd': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}, 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-08-02T06:00:03+02:00'}'''
[2025-08-02 06:00:03][INFO] : MyModbusd: Command 'write' received from jeedom: sending the command to MyModbusClient 525: {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}
[2025-08-02 06:00:03][ERROR] : MyModbusd: No MyModbusClient instance has been started yet for the given equipment ID: {'write': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}}
[2025-08-03 06:00:03][DEBUG] : Received new message on socket
[2025-08-03 06:00:03][DEBUG] : Close connection
[2025-08-03 06:00:03][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'write', 'write_cmd': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}, 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-08-03T06:00:03+02:00'}'''
[2025-08-03 06:00:03][INFO] : MyModbusd: Command 'write' received from jeedom: sending the command to MyModbusClient 525: {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}
[2025-08-03 06:00:03][ERROR] : MyModbusd: No MyModbusClient instance has been started yet for the given equipment ID: {'write': {'eqId': '525', 'cmdWriteValue': 20, 'cmdId': '3487'}}
[2025-08-03 13:28:04][DEBUG] : Received new message on socket
[2025-08-03 13:28:04][DEBUG] : Close connection
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'quit', 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-08-03T13:28:04+02:00'}'''
[2025-08-03 13:28:04][INFO] : MyModbusd: Command 'quit' received from jeedom: exiting
[2025-08-03 13:28:04][INFO] : Cancelling 11 tasks
[2025-08-03 13:28:04][DEBUG] : Pylontech US3000C 296 Ah: 'read_downstream' cancelled
[2025-08-03 13:28:04][DEBUG] : Pylontech US3000C 296 Ah: 'read_downstream' exit
[2025-08-03 13:28:04][INFO] : Listening cancelled
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' for MPPT RS 450-100 (id = 561) cancelled
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' exit for MPPT RS 450-100 (id = 561)
[2025-08-03 13:28:04][DEBUG] : 2x Multiplus II 48-3000: 'read_downstream' cancelled
[2025-08-03 13:28:04][DEBUG] : 2x Multiplus II 48-3000: 'read_downstream' exit
[2025-08-03 13:28:04][DEBUG] : Installation Solaire: 'read_downstream' cancelled
[2025-08-03 13:28:04][DEBUG] : Installation Solaire: 'read_downstream' exit
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' for 2x Multiplus II 48-3000 (id = 560) cancelled
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' exit for 2x Multiplus II 48-3000 (id = 560)
[2025-08-03 13:28:04][DEBUG] : MPPT RS 450-100: 'read_downstream' cancelled
[2025-08-03 13:28:04][DEBUG] : MPPT RS 450-100: 'read_downstream' exit
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' for Pylontech US3000C 296 Ah (id = 562) cancelled
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' exit for Pylontech US3000C 296 Ah (id = 562)
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' for Installation Solaire (id = 525) cancelled
[2025-08-03 13:28:04][DEBUG] : MyModbusd: 'read_upstream' exit for Installation Solaire (id = 525)
[2025-08-03 13:28:04][INFO] : Send async cancelled
[2025-08-03 13:28:04][INFO] : Shutdown
[2025-08-03 13:28:04][DEBUG] : Removing PID file /tmp/jeedom/mymodbus/daemon.pid
[2025-08-03 13:28:04][DEBUG] : Exit 0
[2025-08-03 13:28:06][INFO] : Starting daemon (lib version 1.2.9) with log level: debug
[2025-08-03 13:28:06][DEBUG] : Writing PID 1884261 to /tmp/jeedom/mymodbus/daemon.pid
[2025-08-03 13:28:06][INFO] : Listening on 127.0.0.1:55502
[2025-08-03 13:28:06][DEBUG] : Received new message on socket
[2025-08-03 13:28:06][INFO] : Send async started with a cycle of 0.5s
[2025-08-03 13:28:06][DEBUG] : Close connection
[2025-08-03 13:28:06][DEBUG] : MyModbusd: 'on_message' '''{'CMD': 'newDaemonConfig', 'config': [{'id': '560', 'name': '2x Multiplus II 48-3000', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '4129', 'name': 'Output power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'i', 'cmdAddress': '23', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4133', 'name': 'AC Input', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '820', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4135', 'name': 'ESS charge setpoint', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}, {'id': '525', 'name': 'Installation Solaire', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '3483', 'name': 'SOC Batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '843', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3485', 'name': 'PV Power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '789', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4114', 'name': 'Output power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'i', 'cmdAddress': '23', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4117', 'name': 'Charge batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '842', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3487', 'name': '0W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4118', 'name': 'AC Input', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '820', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4119', 'name': 'ESS charge setpoint', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3488', 'name': '400W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4120', 'name': 'SOH batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '304', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4121', 'name': 'Température batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '262', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3496', 'name': '500W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4122', 'name': 'kWh aujourdhui', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '784', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4123', 'name': 'kWh hier', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '786', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3497', 'name': '600W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3498', 'name': '800W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3518', 'name': '100W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3519', 'name': '1200W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '3887', 'name': 'Auto', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4194', 'name': 'Injection 100W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4195', 'name': '2000W', 'type': 'action', 'cmdDevID': '', 'cmdFctModbus': '6', 'cmdFormat': 'H', 'cmdAddress': '2700', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}, {'id': '561', 'name': 'MPPT RS 450-100', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '4150', 'name': 'PV Power', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '789', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4163', 'name': 'kWh aujourdhui', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '784', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4165', 'name': 'kWh hier', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '786', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4214', 'name': 'String Haut', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '3724', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4215', 'name': 'String bas', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '3725', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}, {'id': '562', 'name': 'Pylontech US3000C 296 Ah', 'eqProtocol': 'tcp', 'eqRefreshMode': 'polling', 'eqPolling': '10', 'eqTimeout': '5', 'eqWriteCmdCheckTimeout': '1', 'eqRetries': '3', 'eqFirstDelay': '0', 'eqErrorDelay': '1', 'eqAddr': '192.168.1.230', 'eqPort': '502', 'eqRegTest': '0', 'cmds': [{'id': '4171', 'name': 'SOC Batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '843', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4175', 'name': 'Charge batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '842', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4181', 'name': 'SOH batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'H', 'cmdAddress': '304', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}, {'id': '4183', 'name': 'Température batterie', 'type': 'info', 'cmdDevID': '', 'cmdFctModbus': '3', 'cmdFormat': 'h', 'cmdAddress': '262', 'cmdFrequency': '1', 'cmdInvertBytes': '0', 'cmdInvertWords': '0', 'cmdInvertDWords': '0', 'repeat': '0'}]}], 'apikey': 'P5RGtSmLRSUHkD6rp2yREqpceOdlknSRJ8Eiicw6LjCD6pdm2S9S8i0ZXNBA080i', 'dt': '2025-08-03T13:28:06+02:00'}'''
[2025-08-03 13:28:06][INFO] : MyModbusd: Command 'newDaemonConfig' received from jeedom: sending the new config to all MyModbusClients
[2025-08-03 13:28:06][INFO] : MyModbusd: 'manage_new_config' Starting equipment 2x Multiplus II 48-3000 (id 560)
[2025-08-03 13:28:06][INFO] : MyModbusd: 'manage_new_config' Starting equipment Installation Solaire (id 525)
[2025-08-03 13:28:06][INFO] : MyModbusd: 'manage_new_config' Starting equipment MPPT RS 450-100 (id 561)
[2025-08-03 13:28:06][INFO] : MyModbusd: 'manage_new_config' Starting equipment Pylontech US3000C 296 Ah (id 562)
[2025-08-03 13:28:06][DEBUG] : 2x Multiplus II 48-3000: 'read_eqConfig' client params for 2x Multiplus II 48-3000: {'name': '2x Multiplus II 48-3000', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f95cce650>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-08-03 13:28:06][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-8' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-08-03 13:28:06][DEBUG] : Installation Solaire: 'read_eqConfig' client params for Installation Solaire: {'name': 'Installation Solaire', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f96f7ce10>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-08-03 13:28:06][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-9' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-08-03 13:28:06][DEBUG] : MPPT RS 450-100: 'read_eqConfig' client params for MPPT RS 450-100: {'name': 'MPPT RS 450-100', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f95cce690>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-08-03 13:28:06][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-10' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-08-03 13:28:06][DEBUG] : Pylontech US3000C 296 Ah: 'read_eqConfig' client params for Pylontech US3000C 296 Ah: {'name': 'Pylontech US3000C 296 Ah', 'timeout': 5.0, 'retries': 3.0, 'trace_connect': <bound method MyModbusBase.trace_connect_callback of <mymodbusclient.MyModbusClient object at 0x7f95cce8d0>>, 'port': 502, 'host': '192.168.1.230', 'framer': <FramerType.SOCKET: 'socket'>}
[2025-08-03 13:28:06][ERROR] : Task exception was never retrieved
future: <Task finished name='Task-11' coro=<MyModbusd.start_client() done, defined at /var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py:114> exception=ValueError("invalid literal for int() with base 10: ''")>
Traceback (most recent call last):
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusd.py", line 124, in start_client
    new_client.read_eqConfig()
  File "/var/www/html/plugins/mymodbus/resources/mymodbus/mymodbusclient.py", line 57, in read_eqConfig
    dev_id = int(cmd["cmdDevID"])
             ^^^^^^^^^^^^^^^^^^^^
ValueError: invalid literal for int() with base 10: ''
[2025-08-03 13:28:06][DEBUG] : 2x Multiplus II 48-3000: 'read_downstream' launched
[2025-08-03 13:28:06][DEBUG] : MyModbusd: 'read_upstream' run for 2x Multiplus II 48-3000 (id = 560)
[2025-08-03 13:28:06][DEBUG] : Installation Solaire: 'read_downstream' launched
[2025-08-03 13:28:06][DEBUG] : MyModbusd: 'read_upstream' run for Installation Solaire (id = 525)
[2025-08-03 13:28:06][DEBUG] : MPPT RS 450-100: 'read_downstream' launched
[2025-08-03 13:28:06][DEBUG] : MyModbusd: 'read_upstream' run for MPPT RS 450-100 (id = 561)
[2025-08-03 13:28:06][DEBUG] : Pylontech US3000C 296 Ah: 'read_downstream' launched
[2025-08-03 13:28:06][DEBUG] : MyModbusd: 'read_upstream' run for Pylontech US3000C 296 Ah (id = 562)