***************************************************************************************************** * Installation des packet de dependances * ***************************************************************************************************** WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Hit:1 http://security.debian.org stretch/updates InRelease Ign:3 http://ftp.debian.org/debian stretch InRelease Hit:4 http://ftp.debian.org/debian stretch-updates InRelease Hit:5 http://ftp.debian.org/debian stretch-backports InRelease Hit:6 http://www.deb-multimedia.org stretch InRelease Hit:7 http://ftp.debian.org/debian stretch-proposed-updates InRelease Hit:8 http://ftp.debian.org/debian stretch Release Get:2 https://repo.jeedom.com/odroid stable InRelease [1,640 B] Hit:9 https://oph.mdrjr.net/meveric all InRelease Hit:10 https://oph.mdrjr.net/meveric stretch InRelease Fetched 1,640 B in 3s (490 B/s) Reading package lists... Building dependency tree... Reading state information... 180 packages can be upgraded. Run 'apt list --upgradable' to see them. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.3). cmake is already the newest version (3.7.2-1). pkg-config is already the newest version (0.29-4+b1). unzip is already the newest version (6.0-21+deb9u2). git is already the newest version (1:2.11.0-3+deb9u7). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... E: Unable to locate package python3-setuptoolsapt WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libffi-dev is already the newest version (3.2.1-6). libssl-dev is already the newest version (1.1.0l-1~deb9u1). libopenjp2-7 is already the newest version (2.1.2-1.1+deb9u5). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libjpeg-dev is already the newest version (1:1.5.1-2). libpng-dev is already the newest version (1.6.28-1+deb9u1). libtiff5-dev is already the newest version (4.0.8-2+deb9u5). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libavcodec-dev is already the newest version (7:3.2.14-1~deb9u1). libavformat-dev is already the newest version (7:3.2.14-1~deb9u1). libswscale-dev is already the newest version (7:3.2.14-1~deb9u1). libv4l-dev is already the newest version (1.12.3-1). libx264-dev is already the newest version (2:0.148.2748+git97eaef2-1). libxvidcore-dev is already the newest version (2:1.3.4-1+b2). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libgtk2.0-dev is already the newest version (2.24.31-2). libgtk-3-dev is already the newest version (3.22.11-1). libcanberra-gtk-module is already the newest version (0.30-3). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libatlas-base-dev is already the newest version (3.10.3-1+b1). gfortran is already the newest version (4:6.3.0-4). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 180 not upgraded. Need to get 142 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://ftp.debian.org/debian stretch/main arm64 python3-pip all 9.0.1-2+deb9u1 [142 kB] debconf: unable to initialize frontend: Dialog debconf: (Dialog frontend will not work on a dumb terminal, an emacs shell buffer, or without a controlling terminal.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 142 kB in 0s (676 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 69934 files and directories currently installed.) Preparing to unpack .../python3-pip_9.0.1-2+deb9u1_all.deb ... Unpacking python3-pip (9.0.1-2+deb9u1) over (9.0.1-2+deb9u1) ... Setting up python3-pip (9.0.1-2+deb9u1) ... Processing triggers for man-db (2.7.6.1-2) ... WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libopenblas-dev is already the newest version (0.2.19-3). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libblas-dev is already the newest version (3.7.0-2). liblapack-dev is already the newest version (3.7.0-2). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... E: Unable to locate package nvidia-opencl-icd WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... libglib2.0-dev is already the newest version (2.50.3-2+deb9u2). 0 upgraded, 0 newly installed, 0 to remove and 180 not upgraded. ***************************************************************************************************** * Compilation de DLIB * ***************************************************************************************************** fatal: destination path 'dlib' already exists and is not an empty directory. mkdir: cannot create directory ‘build’: File exists make: *** No rule to make target 'install'. Stop. ***************************************************************************************************** * Installation de library python * ***************************************************************************************************** Requirement already satisfied: setuptools in /usr/local/lib/python3.5/dist-packages Requirement already satisfied: tokenizer in /usr/local/lib/python3.5/dist-packages Collecting matplotlib Using cached https://files.pythonhosted.org/packages/26/04/8b381d5b166508cc258632b225adbafec49bbe69aa9a4fa1f1b461428313/matplotlib-3.0.3.tar.gz Complete output from command python setup.py egg_info: WARNING: The wheel package is not available. ERROR: Failed to build one or more wheels Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 128, in fetch_build_egg subprocess.check_call(cmd) File "/usr/lib/python3.5/subprocess.py", line 271, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpucdte1cn', '--quiet', 'numpy>=1.10.0']' returned non-zero exit status 1 The above exception was the direct cause of the following exception: Traceback (most recent call last): File "", line 1, in File "/tmp/pip-build-u74v_h70/matplotlib/setup.py", line 297, in cmdclass=cmdclass, File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 164, in setup _install_setup_requires(attrs) File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 159, in _install_setup_requires dist.fetch_build_eggs(dist.setup_requires) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 702, in fetch_build_eggs replace_conflicting=True, File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 781, in resolve replace_conflicting=replace_conflicting File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1064, in best_match return self.obtain(req, installer) File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1076, in obtain return installer(requirement) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 758, in fetch_build_egg return fetch_build_egg(self, req) File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 130, in fetch_build_egg raise DistutilsError(str(e)) from e distutils.errors.DistutilsError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpucdte1cn', '--quiet', 'numpy>=1.10.0']' returned non-zero exit status 1 ============================================================================ Edit setup.cfg to change the build options BUILDING MATPLOTLIB matplotlib: yes [3.0.3] python: yes [3.5.3 (default, Jul 9 2020, 13:00:10) [GCC 6.3.0 20170516]] platform: yes [linux] REQUIRED DEPENDENCIES AND EXTENSIONS numpy: yes [not found. pip may install it below.] install_requires: yes [handled by setuptools] libagg: yes [pkg-config information for 'libagg' could not be found. Using local copy.] freetype: yes [version 2.6.3] png: yes [version 1.6.28] qhull: yes [pkg-config information for 'libqhull' could not be found. Using local copy.] OPTIONAL SUBPACKAGES sample_data: yes [installing] toolkits: yes [installing] tests: no [skipping due to configuration] toolkits_tests: no [skipping due to configuration] OPTIONAL BACKEND EXTENSIONS agg: yes [installing] tkagg: yes [installing; run-time loading from Python Tcl / Tk] macosx: no [Mac OS-X only] windowing: no [Microsoft Windows only] OPTIONAL PACKAGE DATA dlls: no [skipping due to configuration] ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-u74v_h70/matplotlib/ Collecting keras Using cached https://files.pythonhosted.org/packages/44/e1/dc0757b20b56c980b5553c1b5c4c32d378c7055ab7bfa92006801ad359ab/Keras-2.4.3-py2.py3-none-any.whl Collecting pyyaml (from keras) Using cached https://files.pythonhosted.org/packages/64/c2/b80047c7ac2478f9501676c988a5411ed5572f35d1beff9cae07d321512c/PyYAML-5.3.1.tar.gz Collecting h5py (from keras) Using cached https://files.pythonhosted.org/packages/5f/97/a58afbcf40e8abecededd9512978b4e4915374e5b80049af082f49cebe9a/h5py-2.10.0.tar.gz Collecting scipy>=0.14 (from keras) Using cached https://files.pythonhosted.org/packages/04/ab/e2eb3e3f90b9363040a3d885ccc5c79fe20c5b8a3caa8fe3bf47ff653260/scipy-1.4.1.tar.gz Complete output from command python setup.py egg_info: WARNING: The wheel package is not available. ERROR: Failed to build one or more wheels Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 128, in fetch_build_egg subprocess.check_call(cmd) File "/usr/lib/python3.5/subprocess.py", line 271, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmprch6jk8e', '--quiet', 'numpy>=1.13.3']' returned non-zero exit status 1 The above exception was the direct cause of the following exception: Traceback (most recent call last): File "", line 1, in File "/tmp/pip-build-80r8r0bm/scipy/setup.py", line 540, in setup_package() File "/tmp/pip-build-80r8r0bm/scipy/setup.py", line 536, in setup_package setup(**metadata) File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 164, in setup _install_setup_requires(attrs) File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 159, in _install_setup_requires dist.fetch_build_eggs(dist.setup_requires) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 702, in fetch_build_eggs replace_conflicting=True, File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 781, in resolve replace_conflicting=replace_conflicting File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1064, in best_match return self.obtain(req, installer) File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1076, in obtain return installer(requirement) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 758, in fetch_build_egg return fetch_build_egg(self, req) File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 130, in fetch_build_egg raise DistutilsError(str(e)) from e distutils.errors.DistutilsError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmprch6jk8e', '--quiet', 'numpy>=1.13.3']' returned non-zero exit status 1 ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-80r8r0bm/scipy/ Collecting keras_vggface Using cached https://files.pythonhosted.org/packages/2f/7d/5f0319ebdc09ac1a2272364fa9583f5067b6f8aff93fbbf8835d81cbaad7/keras_vggface-0.6-py3-none-any.whl Collecting pyyaml (from keras_vggface) Using cached https://files.pythonhosted.org/packages/64/c2/b80047c7ac2478f9501676c988a5411ed5572f35d1beff9cae07d321512c/PyYAML-5.3.1.tar.gz Requirement already satisfied: six>=1.9.0 in /usr/local/lib/python3.5/dist-packages (from keras_vggface) Collecting numpy>=1.9.1 (from keras_vggface) Using cached https://files.pythonhosted.org/packages/01/1b/d3ddcabd5817be02df0e6ee20d64f77ff6d0d97f83b77f65e98c8a651981/numpy-1.18.5.zip Requirement already satisfied: pillow in /usr/local/lib/python3.5/dist-packages (from keras_vggface) Collecting keras (from keras_vggface) Using cached https://files.pythonhosted.org/packages/44/e1/dc0757b20b56c980b5553c1b5c4c32d378c7055ab7bfa92006801ad359ab/Keras-2.4.3-py2.py3-none-any.whl Collecting scipy>=0.14 (from keras_vggface) Using cached https://files.pythonhosted.org/packages/04/ab/e2eb3e3f90b9363040a3d885ccc5c79fe20c5b8a3caa8fe3bf47ff653260/scipy-1.4.1.tar.gz Complete output from command python setup.py egg_info: WARNING: The wheel package is not available. ERROR: Failed to build one or more wheels Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 128, in fetch_build_egg subprocess.check_call(cmd) File "/usr/lib/python3.5/subprocess.py", line 271, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpfofdb4e0', '--quiet', 'numpy>=1.13.3']' returned non-zero exit status 1 The above exception was the direct cause of the following exception: Traceback (most recent call last): File "", line 1, in File "/tmp/pip-build-pqz7ku29/scipy/setup.py", line 540, in setup_package() File "/tmp/pip-build-pqz7ku29/scipy/setup.py", line 536, in setup_package setup(**metadata) File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 164, in setup _install_setup_requires(attrs) File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 159, in _install_setup_requires dist.fetch_build_eggs(dist.setup_requires) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 702, in fetch_build_eggs replace_conflicting=True, File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 781, in resolve replace_conflicting=replace_conflicting File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1064, in best_match return self.obtain(req, installer) File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1076, in obtain return installer(requirement) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 758, in fetch_build_egg return fetch_build_egg(self, req) File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 130, in fetch_build_egg raise DistutilsError(str(e)) from e distutils.errors.DistutilsError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpfofdb4e0', '--quiet', 'numpy>=1.13.3']' returned non-zero exit status 1 ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-pqz7ku29/scipy/ Requirement already satisfied: pyudev in /usr/local/lib/python3.5/dist-packages Requirement already satisfied: six in /usr/local/lib/python3.5/dist-packages (from pyudev) Requirement already satisfied: pyserial in /usr/local/lib/python3.5/dist-packages Requirement already satisfied: pybind11 in /usr/local/lib/python3.5/dist-packages Requirement already satisfied: requests in /usr/local/lib/python3.5/dist-packages Requirement already satisfied: certifi>=2017.4.17 in /usr/local/lib/python3.5/dist-packages (from requests) Requirement already satisfied: chardet<4,>=3.0.2 in /usr/local/lib/python3.5/dist-packages (from requests) Requirement already satisfied: idna<3,>=2.5 in /usr/local/lib/python3.5/dist-packages (from requests) Requirement already satisfied: urllib3!=1.25.0,!=1.25.1,<1.26,>=1.21.1 in /usr/local/lib/python3.5/dist-packages (from requests) Requirement already satisfied: pillow in /usr/local/lib/python3.5/dist-packages Collecting numpy Using cached https://files.pythonhosted.org/packages/01/1b/d3ddcabd5817be02df0e6ee20d64f77ff6d0d97f83b77f65e98c8a651981/numpy-1.18.5.zip Building wheels for collected packages: numpy Running setup.py bdist_wheel for numpy: started Running setup.py bdist_wheel for numpy: finished with status 'error' Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-mhs5eybt/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace(' ', ' ');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpdfchiw37pip-wheel- --python-tag cp35: Running from numpy source directory. Cythonizing sources Processing numpy/random/_bounded_integers.pxd.in Processing numpy/random/mtrand.pyx Traceback (most recent call last): File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 61, in process_pyx from Cython.Compiler.Version import version as cython_version ImportError: No module named 'Cython' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 238, in main() File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 234, in main find_process_files(root_dir) File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 225, in find_process_files process(root_dir, fromfile, tofile, function, hash_db) File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 191, in process processor_function(fromfile, tofile) File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 66, in process_pyx raise OSError('Cython needs to be installed in Python as a module') OSError: Cython needs to be installed in Python as a module Traceback (most recent call last): File "", line 1, in File "/tmp/pip-build-mhs5eybt/numpy/setup.py", line 488, in setup_package() File "/tmp/pip-build-mhs5eybt/numpy/setup.py", line 469, in setup_package generate_cython() File "/tmp/pip-build-mhs5eybt/numpy/setup.py", line 275, in generate_cython raise RuntimeError("Running cythonize failed!") RuntimeError: Running cythonize failed! ---------------------------------------- Failed building wheel for numpy Running setup.py clean for numpy Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-mhs5eybt/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace(' ', ' ');f.close();exec(compile(code, __file__, 'exec'))" clean --all: Running from numpy source directory. `setup.py clean` is not supported, use one of the following instead: - `git clean -xdf` (cleans all files) - `git clean -Xdf` (cleans all versioned files, doesn't touch files that aren't checked into the git repo) Add `--force` to your command to use it anyway if you must (unsupported). ---------------------------------------- Failed cleaning build dir for numpy Failed to build numpy Installing collected packages: numpy Running setup.py install for numpy: started Running setup.py install for numpy: finished with status 'error' Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-mhs5eybt/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace(' ', ' ');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-dvm5z07x-record/install-record.txt --single-version-externally-managed --compile: Running from numpy source directory. Note: if you need reliable uninstall behavior, then install with pip instead of using `setup.py install`: - `pip install .` (from a git repo or downloaded source release) - `pip install numpy` (last NumPy release on PyPi) Cythonizing sources numpy/random/_bounded_integers.pxd.in has not changed Processing numpy/random/mtrand.pyx Traceback (most recent call last): File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 61, in process_pyx from Cython.Compiler.Version import version as cython_version ImportError: No module named 'Cython' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 238, in main() File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 234, in main find_process_files(root_dir) File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 225, in find_process_files process(root_dir, fromfile, tofile, function, hash_db) File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 191, in process processor_function(fromfile, tofile) File "/tmp/pip-build-mhs5eybt/numpy/tools/cythonize.py", line 66, in process_pyx raise OSError('Cython needs to be installed in Python as a module') OSError: Cython needs to be installed in Python as a module Traceback (most recent call last): File "", line 1, in File "/tmp/pip-build-mhs5eybt/numpy/setup.py", line 488, in setup_package() File "/tmp/pip-build-mhs5eybt/numpy/setup.py", line 469, in setup_package generate_cython() File "/tmp/pip-build-mhs5eybt/numpy/setup.py", line 275, in generate_cython raise RuntimeError("Running cythonize failed!") RuntimeError: Running cythonize failed! ---------------------------------------- Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-mhs5eybt/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace(' ', ' ');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-dvm5z07x-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-mhs5eybt/numpy/ Collecting scipy Using cached https://files.pythonhosted.org/packages/04/ab/e2eb3e3f90b9363040a3d885ccc5c79fe20c5b8a3caa8fe3bf47ff653260/scipy-1.4.1.tar.gz Complete output from command python setup.py egg_info: WARNING: The wheel package is not available. ERROR: Failed to build one or more wheels Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 128, in fetch_build_egg subprocess.check_call(cmd) File "/usr/lib/python3.5/subprocess.py", line 271, in check_call raise CalledProcessError(retcode, cmd) subprocess.CalledProcessError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpxcj6rpv7', '--quiet', 'numpy>=1.13.3']' returned non-zero exit status 1 The above exception was the direct cause of the following exception: Traceback (most recent call last): File "", line 1, in File "/tmp/pip-build-cqe2yg_d/scipy/setup.py", line 540, in setup_package() File "/tmp/pip-build-cqe2yg_d/scipy/setup.py", line 536, in setup_package setup(**metadata) File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 164, in setup _install_setup_requires(attrs) File "/usr/local/lib/python3.5/dist-packages/setuptools/__init__.py", line 159, in _install_setup_requires dist.fetch_build_eggs(dist.setup_requires) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 702, in fetch_build_eggs replace_conflicting=True, File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 781, in resolve replace_conflicting=replace_conflicting File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1064, in best_match return self.obtain(req, installer) File "/usr/local/lib/python3.5/dist-packages/pkg_resources/__init__.py", line 1076, in obtain return installer(requirement) File "/usr/local/lib/python3.5/dist-packages/setuptools/dist.py", line 758, in fetch_build_egg return fetch_build_egg(self, req) File "/usr/local/lib/python3.5/dist-packages/setuptools/installer.py", line 130, in fetch_build_egg raise DistutilsError(str(e)) from e distutils.errors.DistutilsError: Command '['/usr/bin/python3', '-m', 'pip', '--disable-pip-version-check', 'wheel', '--no-deps', '-w', '/tmp/tmpxcj6rpv7', '--quiet', 'numpy>=1.13.3']' returned non-zero exit status 1 ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-cqe2yg_d/scipy/ Collecting opencv-python Could not find a version that satisfies the requirement opencv-python (from versions: ) No matching distribution found for opencv-python Collecting opencv-contrib-python Could not find a version that satisfies the requirement opencv-contrib-python (from versions: ) No matching distribution found for opencv-contrib-python Requirement already satisfied: imutils in /usr/local/lib/python3.5/dist-packages Collecting face_recognition Using cached https://files.pythonhosted.org/packages/1e/95/f6c9330f54ab07bfa032bf3715c12455a381083125d8880c43cbe76bb3d0/face_recognition-1.3.0-py2.py3-none-any.whl Requirement already satisfied: Click>=6.0 in /usr/local/lib/python3.5/dist-packages (from face_recognition) Requirement already satisfied: Pillow in /usr/local/lib/python3.5/dist-packages (from face_recognition) Collecting dlib>=19.7 (from face_recognition) Using cached https://files.pythonhosted.org/packages/f1/40/e407366816646bb452578997e6ca2140f004eec8f611e8512ee429ded2be/dlib-19.20.0.tar.gz Requirement already satisfied: face-recognition-models>=0.3.0 in /usr/local/lib/python3.5/dist-packages (from face_recognition) Collecting numpy (from face_recognition) Using cached https://files.pythonhosted.org/packages/01/1b/d3ddcabd5817be02df0e6ee20d64f77ff6d0d97f83b77f65e98c8a651981/numpy-1.18.5.zip Building wheels for collected packages: dlib, numpy Running setup.py bdist_wheel for dlib: started Running setup.py bdist_wheel for dlib: finished with status 'error' Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-t2btz41_/dlib/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace(' ', ' ');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpllsgeooppip-wheel- --python-tag cp35: usage: -c [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...] or: -c --help [cmd1 cmd2 ...] or: -c --help-commands or: -c cmd --help error: invalid command 'bdist_wheel' ---------------------------------------- Failed building wheel for dlib Running setup.py clean for dlib Running setup.py bdist_wheel for numpy: started Running setup.py bdist_wheel for numpy: finished with status 'error' Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-t2btz41_/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace(' ', ' ');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpp78f2f1ypip-wheel- --python-tag cp35: Running from numpy source directory. Cythonizing sources Processing numpy/random/_bounded_integers.pxd.in Processing numpy/random/mtrand.pyx Traceback (most recent call last): File "/tmp/pip-build-t2btz41_/numpy/tools/cythonize.py", line 61, in process_pyx from Cython.Compiler.Version import version as cython_version ImportError: No module named 'Cython' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/tmp/pip-build-t2btz41_/numpy/tools/cythonize.py", line 238, in main() File "/tmp/pip-build-t2btz41_/numpy/tools/cythonize.py", line 234, in main find_process_files(root_dir) File "/tmp/pip-build-t2btz41_/numpy/tools/cythonize.py", line 225, in find_process_files process(root_dir, fromfile, tofile, function, hash_db) File "/tmp/pip-build-t2btz41_/numpy/tools/cythonize.py", line 191, in process processor_function(fromfile, tofile) File "/tmp/pip-build-t2btz41_/numpy/tools/cythonize.py", line 66, in process_pyx raise OSError('Cython needs to be installed in Python as a module') OSError: Cython needs to be installed in Python as a module Traceback (most recent call last): File "", line 1, in File "/tmp/pip-build-t2btz41_/numpy/setup.py", line 488, in setup_package() File "/tmp/pip-build-t2btz41_/numpy/setup.py", line 469, in setup_package generate_cython() File "/tmp/pip-build-t2btz41_/numpy/setup.py", line 275, in generate_cython raise RuntimeError("Running cythonize failed!") RuntimeError: Running cythonize failed! ---------------------------------------- Failed building wheel for numpy Running setup.py clean for numpy Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-t2btz41_/numpy/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace(' ', ' ');f.close();exec(compile(code, __file__, 'exec'))" clean --all: Running from numpy source directory. `setup.py clean` is not supported, use one of the following instead: - `git clean -xdf` (cleans all files) - `git clean -Xdf` (cleans all versioned files, doesn't touch files that aren't checked into the git repo) Add `--force` to your command to use it anyway if you must (unsupported). ---------------------------------------- Failed cleaning build dir for numpy Failed to build dlib numpy Installing collected packages: dlib, numpy, face-recognition Running setup.py install for dlib: started Running setup.py install for dlib: still running... Running setup.py install for dlib: still running... Running setup.py install for dlib: still running... Running setup.py install for dlib: still running... Running setup.py install for dlib: still running... Running setup.py install for dlib: still running... Running setup.py install for dlib: still running...