+ echo '*******************Begin of package installation******************' *******************Begin of package installation****************** + touch /tmp/jeedom_install_in_progress_teleinfo + echo 1 + echo 2 + sudo killall apt apt-get unattended-upgr apt: no process found apt-get: no process found unattended-upgr: no process found + sudo rm /var/lib/apt/lists/lock + sudo rm /var/cache/apt/archives/lock + sudo rm /var/lib/dpkg/lock /var/lib/dpkg/lock-frontend + sudo sudo dpkg --configure -a --force-confdef + sudo apt update WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Reading package lists... Building dependency tree... Reading state information... 274 packages can be upgraded. Run 'apt list --upgradable' to see them. + echo 3 + sudo apt install -o Dpkg::Options::=--force-confdef -y python3-ftdi1 WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: dconf-gsettings-backend : Depends: dconf-service (< 0.38.0-2.1~) but it is not going to be installed Depends: dconf-service (>= 0.38.0-2) but it is not going to be installed libc6-dev : Breaks: libgcc-8-dev (< 8.4.0-2~) but 8.3.0-6+rpi1 is to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. + echo 4 + sudo chmod +x /var/www/html/core/class/../../plugins/teleinfo/ressources/post-install.sh + sudo /var/www/html/core/class/../../plugins/teleinfo/ressources/post-install.sh Sun 23 Jun 20:05:15 BST 2024 ********************************** * Installation des dépendances * ********************************** Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: bsdmainutils geoip-database libbind9-161 libcdio18 libdns1104 libdns1110 libevent-2.1-6 libevent-core-2.1-6 libevent-pthreads-2.1-6 libfreetype6-dev libgeoip1 libgfortran5 libisc1100 libisc1105 libisccc161 libisccfg163 libjim0.77 liblwres161 libpng-dev libpng-tools libusb-0.1-4 libxcb-util0 php7.3-curl php7.3-gd php7.3-gmp php7.3-imap php7.3-ldap php7.3-mbstring php7.3-mysql php7.3-soap php7.3-xml php7.3-xmlrpc php7.3-zip python3-asn1crypto python3-crypto python3-entrypoints python3-jeepney python3-keyring python3-keyrings.alt python3-secretstorage python3-xdg usb.ids Use 'sudo apt autoremove' to remove them. The following packages have been kept back: alsa-utils apache2 apache2-bin apache2-data apache2-utils apt apt-utils avahi-discover build-essential cpp cpp-8 dh-python espeak espeak-data exim4-base exim4-config exim4-daemon-light ffmpeg g++ g++-8 galera-3 gawk gcc gcc-8 gcc-8-base gdb gir1.2-freedesktop gir1.2-gdkpixbuf-2.0 gir1.2-glib-2.0 gir1.2-gtk-3.0 gir1.2-packagekitglib-1.0 gir1.2-pango-1.0 glib-networking glib-networking-services groff-base gstreamer1.0-plugins-base gtk-update-icon-cache guile-2.2-libs hardlink htop iftop iproute2 iptables jq libalgorithm-diff-xs-perl libaom0 libapache2-mod-php libappstream4 libasound2 libasound2-data libass9 libavcodec58 libavdevice58 libavfilter7 libavformat58 libavresample4 libavutil56 libbrotli1 libc-bin libc-dev-bin libc6 libc6-dbg libc6-dev libcairo-gobject2 libcairo2 libchromaprint1 libcolord2 libdbd-mysql-perl libdbi-perl libdc1394-22 libegl-mesa0 libespeak1 libfcgi-perl libfile-fcntllock-perl libflac8 libflite1 libfreetype6 libfreetype6-dev libgbm1 libgcc-8-dev libgd3 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgfortran5 libgirepository-1.0-1 libgl1-mesa-dri libglapi-mesa libglib2.0-0 libglib2.0-bin libglx-mesa0 libgme0 libgstreamer-plugins-base1.0-0 libgstreamer1.0-0 libgtk-3-0 libgtk-3-bin libhtml-parser-perl libhttp-message-perl libinput10 libiptc0 libiw30 libjq1 liblcms2-2 liblilv-0-0 libllvm9 liblocale-gettext-perl liblua5.3-0 libluajit-5.1-2 libluajit-5.1-common libmp3lame0 libmpg123-0 libnm0 libnorm1 libnotify4 libopenjp2-7 libopenmpt0 libopus0 libpackagekit-glib2-18 libpam-systemd libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libpangoxft-1.0-0 libpcre2-16-0 libpcre2-32-0 libpcre2-8-0 libpcre2-dev libpixman-1-0 libpng-dev libpng-tools libpng16-16 libpolkit-agent-1-0 libpolkit-backend-1-0 libpolkit-gobject-1-0 libportaudio2 libpostproc55 libpulse0 libpython-all-dev libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib libpython3-dev libpython3-stdlib libqt5core5a libqt5dbus5 libqt5gui5 libqt5network5 libqt5positioning5 libqt5printsupport5 libqt5qml5 libqt5quick5 libqt5sensors5 libqt5svg5 libqt5webchannel5 libqt5webkit5 libqt5widgets5 librsvg2-2 librsvg2-common librsync-dev librubberband2 libsdl2-2.0-0 libsensors5 libserd-0-0 libslang2 libsmbclient libsndfile1 libsord-0-0 libsoup-gnome2.4-1 libsoup2.4-1 libsoxr0 libspeex1 libsqlite3-0 libsratom-0-0 libstdc++-8-dev libstdc++6 libswresample3 libswscale5 libsystemd0 libtdb1 libterm-readkey-perl libtext-charwidth-perl libtext-iconv-perl libtiff5 libtwolame0 libudev1 libvisual-0.4-0 libvorbis0a libvorbisenc2 libvorbisfile3 libwbclient0 libwebp6 libwebpmux3 libxml2 libxslt1.1 libxtables12 libxvidcore4 libzmq5 libzvbi-common libzvbi0 locales luajit mailutils mailutils-common mariadb-client mariadb-server mawk mesa-va-drivers mesa-vdpau-drivers mosquitto network-manager nmap nmap-common packagekit packagekit-tools perl perl-base php php-common php-dev php-ssh2 php-yaml pigz policykit-1 ppp python-all python-all-dev python-pip-whl python-six python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal python3 python3-apt python3-cffi-backend python3-chardet python3-crypto python3-dbus python3-dev python3-distutils python3-gi python3-keyrings.alt python3-lib2to3 python3-minimal python3-pip python3-pycurl python3-rpi.gpio python3-six python3-systemd python3-venv qt5-gtk-platformtheme rpi.gpio-common rsyslog samba-common samba-common-bin samba-dsdb-modules samba-libs smbclient systemd udev unattended-upgrades vim vim-common vim-runtime vim-tiny wavemon wpasupplicant xvfb The following packages will be upgraded: libndp0 1 upgraded, 0 newly installed, 0 to remove and 273 not upgraded. Need to get 9,392 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] Abort. Sun 23 Jun 20:05:22 BST 2024 Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gsettings-desktop-schemas : Depends: dconf-gsettings-backend but it is not going to be installed or gsettings-backend libc6-dev : Breaks: libgcc-8-dev (< 8.4.0-2~) but 8.3.0-6+rpi1 is to be installed libgtk-3-common : Depends: dconf-gsettings-backend but it is not going to be installed or gsettings-backend E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: dconf-gsettings-backend : Depends: dconf-service (< 0.38.0-2.1~) but it is not going to be installed Depends: dconf-service (>= 0.38.0-2) but it is not going to be installed libc6-dev : Breaks: libgcc-8-dev (< 8.4.0-2~) but 8.3.0-6+rpi1 is to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. Sun 23 Jun 20:05:26 BST 2024 Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: dconf-gsettings-backend : Depends: dconf-service (< 0.38.0-2.1~) but it is not going to be installed Depends: dconf-service (>= 0.38.0-2) but it is not going to be installed libc6-dev : Breaks: libgcc-8-dev (< 8.4.0-2~) but 8.3.0-6+rpi1 is to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. Sun 23 Jun 20:05:28 BST 2024 Sun 23 Jun 20:05:33 BST 2024 Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: pip in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (24.0) Requirement already satisfied: wheel in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (0.42.0) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: pylibftdi in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (0.22.0) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: six in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (1.16.0) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: pyserial in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (3.5) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: setuptools in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (40.8.0) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: requests in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (2.31.0) Requirement already satisfied: charset-normalizer<4,>=2 in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (from requests) (3.3.2) Requirement already satisfied: idna<4,>=2.5 in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (from requests) (3.7) Requirement already satisfied: urllib3<3,>=1.21.1 in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (from requests) (2.0.7) Requirement already satisfied: certifi>=2017.4.17 in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (from requests) (2024.6.2) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: pyudev in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (0.24.3) Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Requirement already satisfied: paho-mqtt==1.6.1 in ./html/plugins/teleinfo/ressources/venv/lib/python3.7/site-packages (1.6.1) Sun 23 Jun 20:05:55 BST 2024 ************************************* * Installation des dépendances OK * ************************************* + echo 5 + php /var/www/html/core/class/../php/jeecli.php plugin dependancy_end teleinfo + echo 6 + rm /tmp/jeedom_install_in_progress_teleinfo + echo '*******************End of package installation******************' *******************End of package installation******************