Bonjour,
Comme beaucoup d’utilisateurs « ordinaire » (c’est ce que je suis depuis l’été 2018), j’expose mon p’tit problème en espérant que quelqu’un aura eu le même et qu’il aura réussi à le régler
Donc, depuis la dernière màj de Jeedom vers 4.2.8 et RFXcom du 4/2/2022, mon plugin RFXcom ne fonctionne plus…
Habituellement; après certaine màj, il me fallait relancer l’installation des dépendances, puis redémarrer le Démon… et tout rentrait dans l’ordre. Mai là : le Démon reste NOK, avec le message d’erreur [Fatal error : module ‹ serial › has no attribute ‹ VERSION ›] que j’ai pu retrouvé dans pas mal de message…
Bien sûr, j’ai :
- réinstallé le Plugin RFXcom
- réinstallé une sauvegarde antérieure à ces màj…
- puis redémarré ma Smart Box
- et enfin, réinstallé ces màj… sans succès
Espérant une idée géniale à ma portée, je vous souhaite une agréable journée, même si la météo de la moitié nord de la France incite plus à pantoufler qu’à aller se promener dans les sous-bois pour observer les éclosions « printanières » de dame nature
Ci-dessus, le LOG RFX Com en Mode DEBUG
[2022-02-06 11:15:03][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2022-02-06 11:15:05][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB0 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 12,18,21,22,23 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:15:07][INFO] : Start rfxcomd
[2022-02-06 10:15:07][INFO] : Log level : debug
[2022-02-06 10:15:07][INFO] : Socket port : 55000
[2022-02-06 10:15:07][INFO] : Socket host : 127.0.0.1
[2022-02-06 10:15:07][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:15:07][INFO] : Device : /dev/ttyUSB0
[2022-02-06 10:15:07][INFO] : Apikey : R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM
[2022-02-06 10:15:07][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2022-02-06 10:15:07][INFO] : Cycle : 0.3
[2022-02-06 10:15:07][INFO] : Serial rate : 38400
[2022-02-06 10:15:07][INFO] : Serial timeout : 9
[2022-02-06 10:15:07][INFO] : Protocol : 12,18,21,22,23
[2022-02-06 10:15:07][INFO] : Find device : /dev/ttyUSB0
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x02 : Receiver/Transmitter Message
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x1C : Edisio
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2022-02-06 10:15:07][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2022-02-06 10:15:07][DEBUG] : Writing PID 28531 to /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:15:07][DEBUG] : Init request module v2.27.1
[2022-02-06 10:15:07][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2022-02-06 11:15:07][DEBUG] : null
[2022-02-06 10:15:07][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM HTTP/1.1" 200 0
[2022-02-06 10:15:07][ERROR] : Fatal error : module 'serial' has no attribute 'VERSION'
[2022-02-06 10:15:07][DEBUG] : Traceback (most recent call last):
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 394, in <module>
shared.JEEDOM_SERIAL = jeedom_serial(device=_device,rate=_serial_rate,timeout=_serial_timeout)
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/jeedom/jeedom.py", line 231, in __init__
logging.debug('Init serial module v%s' % (str(serial.VERSION),))
AttributeError: module 'serial' has no attribute 'VERSION'
[2022-02-06 10:15:07][DEBUG] : Shutdown
[2022-02-06 10:15:07][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:15:07][DEBUG] : Exit 0
[2022-02-06 11:15:36][ERROR] : Impossible de lancer le démon RFXcom, vérifiez le log rfxcmd
[2022-02-06 11:20:03][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2022-02-06 11:20:04][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB0 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 12,18,21,22,23 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:20:07][INFO] : Start rfxcomd
[2022-02-06 10:20:07][INFO] : Log level : debug
[2022-02-06 10:20:07][INFO] : Socket port : 55000
[2022-02-06 10:20:07][INFO] : Socket host : 127.0.0.1
[2022-02-06 10:20:07][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:20:07][INFO] : Device : /dev/ttyUSB0
[2022-02-06 10:20:07][INFO] : Apikey : R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM
[2022-02-06 10:20:07][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2022-02-06 10:20:07][INFO] : Cycle : 0.3
[2022-02-06 10:20:07][INFO] : Serial rate : 38400
[2022-02-06 10:20:07][INFO] : Serial timeout : 9
[2022-02-06 10:20:07][INFO] : Protocol : 12,18,21,22,23
[2022-02-06 10:20:07][INFO] : Find device : /dev/ttyUSB0
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x02 : Receiver/Transmitter Message
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x1C : Edisio
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2022-02-06 10:20:07][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2022-02-06 10:20:07][DEBUG] : Writing PID 31428 to /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:20:07][DEBUG] : Init request module v2.27.1
[2022-02-06 10:20:07][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2022-02-06 11:20:07][DEBUG] : null
[2022-02-06 10:20:07][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM HTTP/1.1" 200 0
[2022-02-06 10:20:07][ERROR] : Fatal error : module 'serial' has no attribute 'VERSION'
[2022-02-06 10:20:07][DEBUG] : Traceback (most recent call last):
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 394, in <module>
shared.JEEDOM_SERIAL = jeedom_serial(device=_device,rate=_serial_rate,timeout=_serial_timeout)
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/jeedom/jeedom.py", line 231, in __init__
logging.debug('Init serial module v%s' % (str(serial.VERSION),))
AttributeError: module 'serial' has no attribute 'VERSION'
[2022-02-06 10:20:07][DEBUG] : Shutdown
[2022-02-06 10:20:07][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:20:07][DEBUG] : Exit 0
[2022-02-06 11:20:35][ERROR] : Impossible de lancer le démon RFXcom, vérifiez le log rfxcmd
[2022-02-06 11:25:03][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2022-02-06 11:25:04][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device /dev/ttyUSB0 --loglevel debug --socketport 55000 --serialrate 38400 --protocol 12,18,21,22,23 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:25:07][INFO] : Start rfxcomd
[2022-02-06 10:25:07][INFO] : Log level : debug
[2022-02-06 10:25:07][INFO] : Socket port : 55000
[2022-02-06 10:25:07][INFO] : Socket host : 127.0.0.1
[2022-02-06 10:25:07][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:25:07][INFO] : Device : /dev/ttyUSB0
[2022-02-06 10:25:07][INFO] : Apikey : R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM
[2022-02-06 10:25:07][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2022-02-06 10:25:07][INFO] : Cycle : 0.3
[2022-02-06 10:25:07][INFO] : Serial rate : 38400
[2022-02-06 10:25:07][INFO] : Serial timeout : 9
[2022-02-06 10:25:07][INFO] : Protocol : 12,18,21,22,23
[2022-02-06 10:25:07][INFO] : Find device : /dev/ttyUSB0
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x02 : Receiver/Transmitter Message
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x1C : Edisio
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2022-02-06 10:25:07][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2022-02-06 10:25:07][DEBUG] : Writing PID 1722 to /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:25:07][DEBUG] : Init request module v2.27.1
[2022-02-06 10:25:07][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2022-02-06 11:25:07][DEBUG] : null
[2022-02-06 10:25:07][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=R4LB0w5QBPHAl8y8AEZn3uSv5NxvEURM HTTP/1.1" 200 0
[2022-02-06 10:25:07][ERROR] : Fatal error : module 'serial' has no attribute 'VERSION'
[2022-02-06 10:25:07][DEBUG] : Traceback (most recent call last):
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 394, in <module>
shared.JEEDOM_SERIAL = jeedom_serial(device=_device,rate=_serial_rate,timeout=_serial_timeout)
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/jeedom/jeedom.py", line 231, in __init__
logging.debug('Init serial module v%s' % (str(serial.VERSION),))
AttributeError: module 'serial' has no attribute 'VERSION'
[2022-02-06 10:25:07][DEBUG] : Shutdown
[2022-02-06 10:25:07][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2022-02-06 10:25:07][DEBUG] : Exit 0
[2022-02-06 11:25:35][ERROR] : Impossible de lancer le démon RFXcom, vérifiez le log rfxcmd