Oooo que oui j’en suis à 5
Bon j’ai réussi à inclure de nouveau les interrupteurs et prises maintenant c’est juste les micros modules qui coince mais sa va venir ^^ enfin j’espère.
Juste pour savoir, interrupteur de volet roulant celiane est bien détecté mais il y a pas de modèle.
Je les loupé ou il y en a pas?
Sujets ouverts:
Peux tu partager le log AbeilleParser quand tu fais l inclusion pour recuperer son nom ?
(Plugin en mode debug et daemon restarted)
Bien sur voici le fichier.
Je préviens quand j’ai inclus la pemière fois la led est passé en vert directement.
Pour te donner le log AbeilleParser j’ai supprimé du plugin, fait un reset physique, mis en mode debug et j’ai inclus. L’objet c’est inclus correctement comme la première fois mais la led est resté rouge cette fois. Une fois que j’ai repasser en mode par default l’adresse IEEE à fait plusieur mise à jours automatique. Juste pour prévenir au cas ou cela change quelque chose de le log
[2020-11-19 22:03:28][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=90, PacketType=0049
[2020-11-19 22:03:28][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=00, PacketType=0014
[2020-11-19 22:03:28][debug] Abeille1, Type=8014/Permit join status response: PermitJoinStatus=01
[2020-11-19 22:03:28][info ] Zigate1 en mode INCLUSION
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f102 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f104 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f103 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f102 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f104 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f103 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:32][debug] Abeille1, Type=004d/Device announce, ShortAddr=ec3d, ExtAddr=00047400008A24E9, MACCapa=8e, Rejoin=69
[2020-11-19 22:03:32][debug] Abeille1, Type=8701/Route Discovery Confirm (decoded but Not Processed), MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=00 (ZPS_EVENT_NONE->)
[2020-11-19 22:03:32][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=91, PacketType=0045
[2020-11-19 22:03:32][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=52, PacketType=0100
[2020-11-19 22:03:32][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=53, PacketType=0100
[2020-11-19 22:03:32][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=54, PacketType=0100
[2020-11-19 22:03:33][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:33][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=55, PacketType=0100
[2020-11-19 22:03:33][debug] Abeille1, Type=8045/Active endpoints response, SQN=91, Status=00, ShortAddr=ec3d, EndPointCount=02, EndPointList=; 01; f2
[2020-11-19 22:03:33][debug] Abeille1, Type=8011/APS data ACK: Status=00, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:33][debug] Abeille1, Type=8102/Attribut report, SQN=52, SrcAddr=ec3d, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=001f, DataByteList= Shutter switch with neutral
[2020-11-19 22:03:33][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:34][debug] Type=fct; processActionQueue, action: {"when":1605819813,"what":"mqqtPublish","parm0":"Abeille1\/ec3d","parm1":"IEEE","parm2":"Addr","parm3":"00047400008A24E9"}
[2020-11-19 22:03:34][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=56, PacketType=0100
[2020-11-19 22:03:34][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=57, PacketType=0100
[2020-11-19 22:03:34][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=58, PacketType=0100
[2020-11-19 22:03:34][debug] Abeille1, Type=8011/APS data ACK: Status=00, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:34][debug] Abeille1, Type=8102/Attribut report, SQN=57, SrcAddr=ec3d, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=001f, DataByteList= Shutter switch with neutral
[2020-11-19 22:03:35][debug] Type=fct; processActionQueue, action: {"when":1605819814,"what":"mqqtPublish","parm0":"Abeille1\/ec3d","parm1":"IEEE","parm2":"Addr","parm3":"00047400008A24E9"}
[2020-11-19 22:03:35][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=59, PacketType=0100
[2020-11-19 22:03:35][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0045
[2020-11-19 22:03:35][debug] Abeille1, Type=8011/APS data ACK: Status=00, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:35][debug] Abeille1, Type=8102/Attribut report, SQN=59, SrcAddr=ec3d, EndPoint=01, ClustID=0000, AttrID=0010, AttrStatus=86, AttrDataType=ff, AttrSize=0000, DataByteList=
[2020-11-19 22:03:36][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=92, PacketType=0045
[2020-11-19 22:03:36][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=5a, PacketType=0100
[2020-11-19 22:03:36][debug] Abeille1, Type=8045/Active endpoints response, SQN=92, Status=00, ShortAddr=ec3d, EndPointCount=02, EndPointList=; 01; f2
[2020-11-19 22:03:37][debug] Type=fct; processActionQueue, action: {"when":1605819816,"what":"mqqtPublish","parm0":"Abeille1\/ec3d","parm1":"IEEE","parm2":"Addr","parm3":"00047400008A24E9"}
[2020-11-19 22:03:37][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=5b, PacketType=0100
[2020-11-19 22:03:37][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=5c, PacketType=0100
[2020-11-19 22:03:39][debug] Type=fct; processActionQueue, action: {"when":1605819818,"what":"mqqtPublish","parm0":"Abeille1\/ec3d","parm1":"IEEE","parm2":"Addr","parm3":"00047400008A24E9"}
[2020-11-19 22:03:39][debug] Abeille1, Type=8011/APS data ACK: Status=a7, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:39][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=5d, PacketType=0100
[2020-11-19 22:03:39][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=5e, PacketType=0100
[2020-11-19 22:03:39][debug] Abeille1, Type=8011/APS data ACK: Status=00, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:40][debug] Abeille1, Type=8102/Attribut report, SQN=5d, SrcAddr=ec3d, EndPoint=01, ClustID=0000, AttrID=0005, AttrStatus=00, AttrDataType=42, AttrSize=001f, DataByteList= Shutter switch with neutral
[2020-11-19 22:03:40][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=5f, PacketType=0100
[2020-11-19 22:03:40][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=60, PacketType=0100
[2020-11-19 22:03:40][debug] Abeille1, Type=8011/APS data ACK: Status=00, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:40][debug] Abeille1, Type=8102/Attribut report, SQN=5f, SrcAddr=ec3d, EndPoint=01, ClustID=0000, AttrID=0010, AttrStatus=86, AttrDataType=ff, AttrSize=0000, DataByteList=
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f003 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f003 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8011/APS data ACK: Status=a7, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f003 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f003 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f003 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f000 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f003 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:40][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f005 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:41][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=61, PacketType=0100
[2020-11-19 22:03:41][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=62, PacketType=0100
[2020-11-19 22:03:41][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0045
[2020-11-19 22:03:42][debug] Type=fct; processActionQueue, action: {"when":1605819821,"what":"configureNE","addr":"Abeille1\/ec3d"}
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE Start
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportIlluminanceXiaomi: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportIlluminanceXiaomi: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:42][debug] Type=fct; ===> Configure NE End
[2020-11-19 22:03:42][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0045
[2020-11-19 22:03:43][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0045
[2020-11-19 22:03:43][debug] Abeille1, Type=8011/APS data ACK: Status=a7, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:44][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=93, PacketType=0045
[2020-11-19 22:03:44][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:45][debug] Type=fct; processActionQueue, action: {"when":1605819824,"what":"getNE","addr":"Abeille1\/ec3d"}
[2020-11-19 22:03:45][debug] Type=fct; getNE cmd: getManufacturerName
[2020-11-19 22:03:45][debug] Type=fct; getNE cmd: getSWBuild
[2020-11-19 22:03:45][debug] Type=fct; getNE cmd: getManufacturerName
[2020-11-19 22:03:45][debug] Type=fct; getNE cmd: getSWBuild
[2020-11-19 22:03:45][debug] Type=fct; processActionQueue, action: {"when":1605819824,"what":"configureNE","addr":"Abeille1\/ec3d"}
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE Start
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportIlluminanceXiaomi: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportIlluminanceXiaomi: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2020-11-19 22:03:45][debug] Type=fct; ===> Configure NE End
[2020-11-19 22:03:45][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:46][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:47][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=63, PacketType=0100
[2020-11-19 22:03:47][debug] Abeille1, Type=8011/APS data ACK: Status=a7, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:47][debug] Abeille1, Type=8011/APS data ACK: Status=a7, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:48][debug] Type=fct; processActionQueue, action: {"when":1605819827,"what":"getNE","addr":"Abeille1\/ec3d"}
[2020-11-19 22:03:48][debug] Type=fct; getNE cmd: getManufacturerName
[2020-11-19 22:03:48][debug] Type=fct; getNE cmd: getSWBuild
[2020-11-19 22:03:48][debug] Type=fct; getNE cmd: getManufacturerName
[2020-11-19 22:03:48][debug] Type=fct; getNE cmd: getSWBuild
[2020-11-19 22:03:48][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=64, PacketType=0100
[2020-11-19 22:03:48][debug] Abeille1, Type=8702/APS Data Confirm Fail, Status=d4 (ZPS_NWK_ENUM_FRAME_IS_BUFFERED->Unicast frame does not have a route available but it is buffered for automatic resend. / https://github.com/fairecasoimeme/ZiGate/issues/207), SrcEndpoint=01, DestEndpoint=01, DestMode=02, DestAddr=ec3d, SQN=43
[2020-11-19 22:03:48][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=65, PacketType=0100
[2020-11-19 22:03:48][debug] Abeille1, Type=8702/APS Data Confirm Fail, Status=d4 (ZPS_NWK_ENUM_FRAME_IS_BUFFERED->Unicast frame does not have a route available but it is buffered for automatic resend. / https://github.com/fairecasoimeme/ZiGate/issues/207), SrcEndpoint=01, DestEndpoint=01, DestMode=02, DestAddr=ec3d, SQN=44
[2020-11-19 22:03:48][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:49][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:50][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:50][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f102 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:50][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f104 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:50][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f101 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:50][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f103 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:51][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f103 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:51][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f102 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:51][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f104 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:51][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f103 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:51][debug] Abeille1, Type=8000/Status, Status=00-(Success), SQN=94, PacketType=0043
[2020-11-19 22:03:51][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:51][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f104 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:51][debug] Abeille1, Type=8035/PDM event code, PDMEvtCode=x03, RecId=0000f103 => LARGEST_RECORD_FULL_SAVE_NO_LONGER_POSSIBLE
[2020-11-19 22:03:52][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:53][debug] Abeille1, Type=8000/Status, Status=80-(ZigBee Error Code unknown), SQN=00, PacketType=0043
[2020-11-19 22:03:54][debug] Abeille1, Type=8701/Route Discovery Confirm (decoded but Not Processed), MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=d0 (ZPS_NWK_ENUM_ROUTE_DISCOVERY_FAILED->Attempt at route discovery has failed due to any reason except lack of table space)
[2020-11-19 22:03:54][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=66, PacketType=0100
[2020-11-19 22:03:54][debug] Abeille1, Type=8011/APS data ACK: Status=a7, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:54][debug] Abeille1, Type=8011/APS data ACK: Status=a7, DestAddr=ec3d, DestEndPoint=01, ClustID=0000
[2020-11-19 22:03:55][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=67, PacketType=0100
[2020-11-19 22:03:56][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=68, PacketType=0100
[2020-11-19 22:03:57][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=69, PacketType=0100
[2020-11-19 22:03:58][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=6a, PacketType=0100
[2020-11-19 22:03:59][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=6b, PacketType=0100
[2020-11-19 22:04:00][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=6c, PacketType=0100
[2020-11-19 22:04:01][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=6d, PacketType=0100
[2020-11-19 22:04:02][debug] Abeille1, Type=8000/Status, Status=15-(ZigBee Error Code unknown), SQN=6e, PacketType=0100
J’ai refais la manipulation plusieurs fois en mode « defaut » bizarrement maintenant la led reste rouge.
Edit message 30min après:
Après refait plusieurs fois le reset pendant que l’interrupteur était inclus la led est repassé au vert.
Bon pour finir j’ai réussi à inclure tout mes équipements ^^
Il reste juste la perte de connexion dans mon atelier (environ 20m de la maison) malgré qu’il y a dedans :
- 3 micro modules legrand
- Une prise legrand
- Une prise osram
- Une clé répétiteur zigate
Mais se problème de perte de connexion je l’ai depuis le début
Bonne nouvelle 
Oui merci de ton assistance 
Juste une chose du coup car j’ai parcourus les liens que tu ma donné pour le volet roulant mais j’ai pas tout compris.
C’est possible d’avoir les commandes pour un interrupteurs Legrand céliane du coup?
Rappels moi lequel ?
C’est celui la que j’ai acheté https://www.amazon.fr/dp/B07G3GHLPG/ref=cm_sw_r_cp_apa_fabt1_4R6VFbF7NDCGE?_encoding=UTF8&psc=1
Sinon tu à sa photo au dessus et le parser pendant sont inclusion.
Si tu as un pi qui traîne, installe une zigate dans ce local.
Antoine
« Shutter switch with neutral »
Il est connu par Abeille (au moins dans la version de dev).
Quel est ton soucis ?
Et bien sur ma version j’ai sa en modèle moi.
Et oui l’interrupteur est bien reconnu mais ne de commande pas
Ceci est juste l icone pour faire beau. As tu les commandes et peux tu commander le volet ?
J’ai des commandes mais rien se passe quand je clike sur tester.
(Juste pour info le ruban led que je t’avais parlé et que ta ajouté sur ta dernière maj fonctionne niquel c’est super merci :))
Super pour le Ruban
Cette discussion devient beaucoup trop longue, je ne peux pas suivre.
Si tu un soucis specifique, peux tu ouvrir un sujet dédié ?
Je fais sa oui
Ce sujet a été automatiquement fermé après 24 heures suivant le dernier commentaire. Aucune réponse n’est permise dorénavant.