Queston apprentissage Thermostat

Bonjour,

Je suis sur Jeedom 3.3.53, dernier plugin thermostat 2020-11-23 01:17:27
Il me semble, mais sans être sûr, que le nombre d’apprentissage chaud doit aller jusqu’à la valeur 50 pour affiner au mieux cet apprentissage donc la régulation. Mais sur 3 mes thermostats, cela reste à la valeur 15 pour l’un et 10 pour l’autre et 1 pour le dernier. J’ai bien activé l’auto-apprentissage.
Dois je faire un RAZ apprentissage?
Que puis je vérifier pour valider que l’apprentissage se passe bien? En sachant que dans les logs en mode débug, je ne vois pas d’erreur.

[2020-11-27 15:45:05][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Action stop
[2020-11-27 15:45:05][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action stop
[2020-11-27 15:45:10][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action stop
[2020-11-27 15:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 15:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 16:15:00
[2020-11-27 15:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 20.2 - Temp out : 11.6 - Consigne : 17
[2020-11-27 15:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 15:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 15:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 0
[2020-11-27 15:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Durée du cycle trop courte, aucun lancement
[2020-11-27 15:45:16][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 15:45:16][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 16:15:00
[2020-11-27 15:45:16][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 21 - Temp out : 11.6 - Consigne : 17
[2020-11-27 15:45:16][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 15:45:16][DEBUG] : [Confort][Thermostat Chauffage Salon] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 15:45:16][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 0
[2020-11-27 15:45:16][DEBUG] : [Confort][Thermostat Chauffage Salon] : Durée du cycle trop courte, aucun lancement
[2020-11-27 15:45:17][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 15:45:17][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 16:15:00
[2020-11-27 15:45:17][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.4 - Temp out : 11.6 - Consigne : 10
[2020-11-27 15:45:17][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 15:45:17][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.4 * 10) + (-1.6 * 2) + 0 = 87.2
[2020-11-27 15:45:17][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 26.16
[2020-11-27 16:00:06][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Action stop
[2020-11-27 16:00:06][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Action stop
[2020-11-27 16:00:07][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action stop
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Début calcul temporel
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Reprogrammation automatique : 2020-11-27 16:30:00
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Begin auto learning
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Last power ok, check what I have to learn, last state : stop
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Temp in : 14.9 - Temp out : 11.4 - Consigne : 10
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Direction : -1
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Power calcul : (-4.9 * 10) + (-1.4 * 2) + 0 = 51.8
[2020-11-27 16:00:10][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Cycle duration : 15.54
[2020-11-27 16:00:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:00:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 16:30:00
[2020-11-27 16:00:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 20 - Temp out : 11.4 - Consigne : 17
[2020-11-27 16:00:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:00:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 16:00:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 0
[2020-11-27 16:00:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:00:11][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 16:00:11][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 16:30:00
[2020-11-27 16:00:11][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.3 - Temp out : 11.4 - Consigne : 10
[2020-11-27 16:00:11][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 16:00:11][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.3 * 10) + (-1.4 * 2) + 0 = 85.8
[2020-11-27 16:00:11][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 25.74
[2020-11-27 16:00:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action stop
[2020-11-27 16:00:26][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:00:26][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 16:30:00
[2020-11-27 16:00:26][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 20 - Temp out : 11.4 - Consigne : 17
[2020-11-27 16:00:26][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:00:26][DEBUG] : [Confort][Thermostat Chauffage Séjour] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 16:00:26][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 0
[2020-11-27 16:00:26][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:00:27][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 16:00:27][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 16:30:00
[2020-11-27 16:00:27][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20.5 - Temp out : 11.4 - Consigne : 17
[2020-11-27 16:00:27][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 16:00:27][DEBUG] : [Confort][Thermostat Chauffage Salon] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 16:00:27][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 0
[2020-11-27 16:00:27][DEBUG] : [Confort][Thermostat Chauffage Salon] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:00:27][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 16:00:27][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 16:30:00
[2020-11-27 16:00:27][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.3 - Temp out : 11.4 - Consigne : 10
[2020-11-27 16:00:27][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 16:00:27][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.3 * 10) + (-1.4 * 2) + 0 = 85.8
[2020-11-27 16:00:27][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 25.74
[2020-11-27 16:11:50][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] Détection d'un changement sur une fenêtre
[2020-11-27 16:11:50][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] Fenêtre trouvée : [Chambre Leanne][Virtuel Detecteur Fenetre Leanne][Etat] - valeur : 0
[2020-11-27 16:11:50][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] Fenêtre fermée
[2020-11-27 16:11:50][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne][windowClose] Je n'ai jamais vu cette fenêtre ouverte, je ne fais rien
[2020-11-27 16:15:04][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Action stop
[2020-11-27 16:15:05][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action stop
[2020-11-27 16:15:10][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action stop
[2020-11-27 16:15:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:15:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 16:45:00
[2020-11-27 16:15:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 20 - Temp out : 11.4 - Consigne : 17
[2020-11-27 16:15:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:15:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 16:15:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 0
[2020-11-27 16:15:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:15:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 16:15:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 16:45:00
[2020-11-27 16:15:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20.5 - Temp out : 11.4 - Consigne : 17
[2020-11-27 16:15:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 16:15:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 16:15:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 0
[2020-11-27 16:15:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:15:18][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 16:15:18][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 16:45:00
[2020-11-27 16:15:18][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.3 - Temp out : 11.4 - Consigne : 10
[2020-11-27 16:15:18][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 16:15:18][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.3 * 10) + (-1.4 * 2) + 0 = 85.8
[2020-11-27 16:15:18][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 25.74
[2020-11-27 16:17:21][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] Détection d'un changement sur une fenêtre
[2020-11-27 16:17:21][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] Fenêtre trouvée : [Chambre Corentin][Virtuel Détecteur Fenetre Chambre Corentin][Etat] - valeur : 0
[2020-11-27 16:17:21][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] Fenêtre fermée
[2020-11-27 16:17:21][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin][windowClose] Je n'ai jamais vu cette fenêtre ouverte, je ne fais rien
[2020-11-27 16:30:07][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Action stop
[2020-11-27 16:30:07][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Action stop
[2020-11-27 16:30:07][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action stop
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Début calcul temporel
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Begin auto learning
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Last power ok, check what I have to learn, last state : stop
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Temp in : 14.9 - Temp out : 11.4 - Consigne : 10
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Direction : -1
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Power calcul : (-4.9 * 10) + (-1.4 * 2) + 0 = 51.8
[2020-11-27 16:30:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Cycle duration : 15.54
[2020-11-27 16:30:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:30:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 19.7 - Temp out : 11.4 - Consigne : 17
[2020-11-27 16:30:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:30:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : La température est supérieure à la consigne de plus de 1.5°C, je ne fais rien
[2020-11-27 16:30:12][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 0
[2020-11-27 16:30:12][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:30:12][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 16:30:12][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:12][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.2 - Temp out : 11.4 - Consigne : 10
[2020-11-27 16:30:12][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 16:30:12][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.2 * 10) + (-1.4 * 2) + 0 = 84.8
[2020-11-27 16:30:12][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 25.44
[2020-11-27 16:30:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:30:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 19.7 - Temp out : 11.4 - Consigne : 20
[2020-11-27 16:30:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:30:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Power calcul : (0.3 * 138.43) + (8.6 * 5.95) + 0 = 92.699
[2020-11-27 16:30:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 27.8097
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action stop
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 19.7 - Temp out : 11.4 - Consigne : 20
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Power calcul : (0.3 * 138.43) + (8.6 * 5.95) + 0 = 92.699
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 27.8097
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action chauffage
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action chauffage
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20 - Temp out : 11.4 - Consigne : 19.5
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Salon] : Power calcul : (-0.5 * 153.26) + (8.1 * 9.43) + 0 = -0.247
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 0
[2020-11-27 16:30:14][DEBUG] : [Confort][Thermostat Chauffage Salon] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:30:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 16:30:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20 - Temp out : 11.4 - Consigne : 19.5
[2020-11-27 16:30:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 16:30:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Power calcul : (-0.5 * 153.26) + (8.1 * 9.43) + 0 = -0.247
[2020-11-27 16:30:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 0
[2020-11-27 16:30:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:30:17][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:30:17][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:17][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 19.7 - Temp out : 11.4 - Consigne : 20
[2020-11-27 16:30:17][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:30:17][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Power calcul : (0.3 * 138.43) + (8.6 * 5.95) + 0 = 92.699
[2020-11-27 16:30:17][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 27.8097
[2020-11-27 16:30:17][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action chauffage
[2020-11-27 16:30:23][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 16:30:23][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:23][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20 - Temp out : 11.4 - Consigne : 19.5
[2020-11-27 16:30:23][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 16:30:23][DEBUG] : [Confort][Thermostat Chauffage Salon] : Power calcul : (-0.5 * 153.26) + (8.1 * 9.43) + 0 = -0.247
[2020-11-27 16:30:23][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 0
[2020-11-27 16:30:23][DEBUG] : [Confort][Thermostat Chauffage Salon] : Durée du cycle trop courte, aucun lancement
[2020-11-27 16:30:23][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 16:30:23][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 17:00:00
[2020-11-27 16:30:23][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.2 - Temp out : 11.4 - Consigne : 10
[2020-11-27 16:30:23][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 16:30:23][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.2 * 10) + (-1.4 * 2) + 0 = 84.8
[2020-11-27 16:30:23][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 25.44
[2020-11-27 16:31:09][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:31:09][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 17:01:00
[2020-11-27 16:31:09][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 19.7 - Temp out : 11 - Consigne : 20.5
[2020-11-27 16:31:09][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:31:09][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Power calcul : (0.8 * 138.43) + (9.5 * 5.95) + 0 = 167.269
[2020-11-27 16:31:09][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 30
[2020-11-27 16:31:09][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action chauffage
[2020-11-27 16:31:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 16:31:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 17:01:00
[2020-11-27 16:31:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20 - Temp out : 11 - Consigne : 20
[2020-11-27 16:31:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 16:31:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Power calcul : (0 * 153.26) + (9 * 9.43) + 0 = 84.87
[2020-11-27 16:31:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 25.461
[2020-11-27 16:31:15][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action chauffage
[2020-11-27 16:31:20][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 16:31:20][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 17:01:00
[2020-11-27 16:31:20][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.2 - Temp out : 11 - Consigne : 10
[2020-11-27 16:31:20][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 16:31:20][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.2 * 10) + (-1 * 2) + 0 = 84
[2020-11-27 16:31:20][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 25.2
[2020-11-27 16:45:05][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Action stop
[2020-11-27 16:45:06][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action chauffage
[2020-11-27 16:45:11][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action chauffage
[2020-11-27 16:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 16:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 17:15:00
[2020-11-27 16:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 20.7 - Temp out : 10.8 - Consigne : 20.5
[2020-11-27 16:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 16:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Power calcul : (-0.2 * 138.43) + (9.7 * 5.95) + 0 = 30.029
[2020-11-27 16:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 9.0087
[2020-11-27 16:45:15][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action chauffage
[2020-11-27 16:45:21][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 16:45:21][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 17:15:00
[2020-11-27 16:45:21][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20 - Temp out : 10.8 - Consigne : 20
[2020-11-27 16:45:21][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 16:45:21][DEBUG] : [Confort][Thermostat Chauffage Salon] : Power calcul : (0 * 153.26) + (9.2 * 9.43) + 0 = 86.756
[2020-11-27 16:45:21][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 26.0268
[2020-11-27 16:45:21][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action chauffage
[2020-11-27 16:45:26][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 16:45:26][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 17:15:00
[2020-11-27 16:45:26][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.2 - Temp out : 10.8 - Consigne : 10
[2020-11-27 16:45:26][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 16:45:26][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.2 * 10) + (-0.8 * 2) + 0 = 83.6
[2020-11-27 16:45:26][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 25.08
[2020-11-27 16:54:04][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action stop
[2020-11-27 17:00:06][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Action stop
[2020-11-27 17:00:06][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Action stop
[2020-11-27 17:00:06][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action chauffage
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Début calcul temporel
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Reprogrammation automatique : 2020-11-27 17:30:00
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Begin auto learning
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Last power ok, check what I have to learn, last state : stop
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Temp in : 14.9 - Temp out : 10.3 - Consigne : 10
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Direction : -1
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Power calcul : (-4.9 * 10) + (-0.3 * 2) + 0 = 49.6
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Cycle duration : 14.88
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Début calcul temporel
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Reprogrammation automatique : 2020-11-27 17:30:00
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Begin auto learning
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Last power ok, check what I have to learn, last state : stop
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Temp in : 14.9 - Temp out : 10.3 - Consigne : 10
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Direction : -1
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Power calcul : (-4.9 * 10) + (-0.3 * 2) + 0 = 49.6
[2020-11-27 17:00:11][DEBUG] : [Chambre Corentin][Thermostat Chambre Corentin] : Cycle duration : 14.88
[2020-11-27 17:00:13][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Action stop
[2020-11-27 17:00:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Début calcul temporel
[2020-11-27 17:00:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Reprogrammation automatique : 2020-11-27 17:30:00
[2020-11-27 17:00:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Temp in : 21.8 - Temp out : 10.3 - Consigne : 20.5
[2020-11-27 17:00:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Direction : 1
[2020-11-27 17:00:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Power calcul : (-1.3 * 138.43) + (10.2 * 5.95) + 0 = -119.269
[2020-11-27 17:00:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Cycle duration : 0
[2020-11-27 17:00:16][DEBUG] : [Confort][Thermostat Chauffage Séjour] : Durée du cycle trop courte, aucun lancement
[2020-11-27 17:00:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Début calcul temporel
[2020-11-27 17:00:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Reprogrammation automatique : 2020-11-27 17:30:00
[2020-11-27 17:00:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Temp in : 20.3 - Temp out : 10.3 - Consigne : 20
[2020-11-27 17:00:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Direction : 1
[2020-11-27 17:00:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Power calcul : (-0.3 * 153.26) + (9.7 * 9.43) + 0 = 45.493
[2020-11-27 17:00:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Cycle duration : 13.6479
[2020-11-27 17:00:18][DEBUG] : [Confort][Thermostat Chauffage Salon] : Action chauffage
[2020-11-27 17:00:22][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Début calcul temporel
[2020-11-27 17:00:22][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Reprogrammation automatique : 2020-11-27 17:30:00
[2020-11-27 17:00:22][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Temp in : 18.2 - Temp out : 10.3 - Consigne : 10
[2020-11-27 17:00:22][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Direction : -1
[2020-11-27 17:00:22][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Power calcul : (-8.2 * 10) + (-0.3 * 2) + 0 = 82.6
[2020-11-27 17:00:22][DEBUG] : [Chambre Leanne][Thermostat Chambre Leanne] : Cycle duration : 24.78

Merci

Bonsoir.

Il faut lui laisser le temps.
- Il me semble que cela vous a déjà et indiqué.

Il ne faut surtout pas le remettre à 0.

Votre log m’interpelle.
Vous avez des cycles, visiblement trop prêt les uns des autres.
Pourquoi ne pas avoir laissé les réglages par défaut pour comprendre le plugin.

Bonjour a tous, @Fabrice
De ce que j’avais compris, à chaque cycle de chauffage, le plugin apprend et incremente le compteur? Mais moi le compteur ne bouge plus alors que je chauffe depuis 3-4 semaines et mes deux thermostats salon et séjour ont été créés il y a environ 10 mois.
Pour les réglages par défaut, ils le sont pour salon et séjour et chambre Corentin : cycle à 30mn et temps de chauffe mini à 5%.
J’ai changé celui de chambre Leanne car c’est un radiateur à chaleur douce et avec les paramètres par défaut, le thermostat mettait en chauffe 2mn à chaque cycle, mais du coup 2mn ne permet pas à ce que mon radiateur produise du chaud.

Bonjour,

Par défaut (chez moi en tout cas…) le cycle de chauffe est à 60 minutes, quand je parle défaut, c’est par défaut dans le plugin et pas un défaut customisé par vous même (qui n’est donc plus un réglage par défaut) (mais mon installation est réalisée depuis fin 2015).

Je ne pense pas que l’apprentissage ce réalise à chaque cycle, mais tout le temps. L’apprentissage se réalise en apprenant plusieurs valeurs. Comme le % de chute de température de votre pièce afin d’en déduire un coefficient d’isolation etc…
L’apprentissage est continu aussi, même arrivé à 50, cela se fait tout le temps.

Je n’arrive pas à comprendre ce qui vous arrive, si le temps de chauffe de 2 minutes ne permet pas au radiateur d’avoir de la chauffe, alors le plugin doit augmenter ce temps la fois d’après et ainsi de suite.

Vous pouvez monter les vues :
Equipement / Actions / Modes / Avancée

Pardon, je viens de remettre mes neurones en place ce matin, les 30mn et 5% sont les valeurs que j’ai mises et qui ont été prises sur le tuto de jeedom-facile, Benjamin indiquait que c’était les paramètres les plus appropriés pour des splits des pompe à chaleur.

Pour le radiateur chaleur douce, je suis passé à 25% pour avoir des cycles de chauffe plus long, donc là il demande 25% soit 8mn (par rapport au cycle des 30mns) et cela va mieux, mais je devrais peut être passer à 60mn et 5% comme le défaut?

Pour les splits pompe à chaleur, voici les screens :

Pour le radiateur rayonnant « corentin », j’ai bien les 50 cycles d’apprentissage et c’est le seul :