Probleme NOK

jahfly · Novembre 21, 2020, 5:26

Bonjour,

J’ai besoin de votre aide, je sèche, j’ai cherché mais je n’y arrive pas.
Voila j’essaye d’installer blea mais le Demon et les dependances restent NOK.
Donc je suis parti dans les méandres de mon rpi3.J’ai mis à jour python2 et suis passer par défaut en 2.7.9 puis python 3 pour passer à la version 3.9.0 pareil pour PIP et PIP3, version pip 20.2.4 from /usr/local/lib/python3.5/site-packages/pip (python 3.5) et version 20.2.3 from /usr/local/lib/python3.9/site-packages/pip (python 3.9).
J’ai bien fait la vérification des versions et on est bon.
Le souci vient quand je veux installer bluepy, je tape

sudo pip3 install bluepy

Mais là j’ai en réponse

WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Requirement already satisfied: bluepy in /usr/local/lib/python3.9/site-packages (1.1.4)
WARNING: You are using pip version 20.2.3; however, version 20.2.4 is available.
You should consider upgrading via the '/usr/local/bin/python3.9 -m pip install --upgrade pip' command.

Je n’arrive pas à aller à la version 20.2.4 et quand je vais dans le log de jeedom et j’ai aussi

WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
Could not fetch URL https://pypi.org/simple/pycrypto/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pycrypto/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement pycrypto (from versions: none)
ERROR: No matching distribution found for pycrypto
WARNING: You are using pip version 20.2.3; however, version 20.2.4 is available.
You should consider upgrading via the '/usr/local/bin/python3.9 -m pip install --upgrade pip' command.
/var/www/html/plugins/blea/core/class/../../resources/install_apt.sh: ligne 44: /tmp/jeedom/blea/dependance: Aucun fichier ou dossier de ce type
********************************************************
*			 Installation terminée					*
********************************************************
rm: impossible de supprimer « /tmp/jeedom/blea/dependance »: Aucun fichier ou dossier de ce type

A ce que je comprends il ne trouve pas bluepy parce qu’il n’arrive pas à l’installer à l’origine parce que la version pip3 n’est pas bonne.
Que puis je faire? comme mettre à jour?

Merci par avance.

iPapy · Novembre 21, 2020, 5:31

Bonjour,

Comme pour toute demande un peu plus d’infos complémentaire serait utile!

Quelle version de jeedom, du plugin, type de matériel, version d’OS ?

Toms · Novembre 21, 2020, 5:31

Lo,

Es- tu allé sur le Github de Sarakha ? Certainement quelques petites mises à jour s’imposent,

Au plaisir, bonne soirée,

jahfly · Novembre 21, 2020, 5:43

Désoler
Jeedom en version 3.3.39
Plugin en version 2 11 2020
Je suis en RPI 3 sous jessie Linux raspberrypi 4.9.35-v7+ #1014

je vais voir aussi ce que sarakha nous preconise

iPapy · Novembre 21, 2020, 5:46

Bonsoir,
Jessie est déprécié donc je t’invite à migrer vers au minimum vers Stretch voir Buster avec d’avoir un OS à jour ainsi que les version de Python

Tout comme ta version de Jeedom qui est pas à jour non plus car nous sommes en 3.3.53

jahfly · Décembre 6, 2020, 5:24

Bonjour,

Me revoila après avoir tout mis à jour avec quelques soucis, mais maintenant c’est résolu.
Je suis donc sous buster avec jeedom en 3.3.59
Je t’ai écouté iPapy@
Mais malheureusement rien n’y fait, malgré la mise à jour des dépendances.
Voilà mon retour d’installation des dépendances.

Atteint :1 https://deb.nodesource.com/node_12.x buster InRelease
Atteint :2 http://archive.raspberrypi.org/debian buster InRelease
Atteint :3 http://raspbian.raspberrypi.org/raspbian buster InRelease
Lecture des listes de paquets…
Lecture des listes de paquets…
Construction de l'arbre des dépendances…
Lecture des informations d'état…
build-essential est déjà la version la plus récente (12.6).
libatlas-base-dev est déjà la version la plus récente (3.10.3-8+rpi1).
libffi-dev est déjà la version la plus récente (3.2.1-9).
libopenjp2-7 est déjà la version la plus récente (2.3.0-2+deb10u1).
libtiff5 est déjà la version la plus récente (4.1.0+git191117-2~deb10u1).
python3-dev est déjà la version la plus récente (3.7.3-1).
python3-pyudev est déjà la version la plus récente (0.21.0-1).
python3-requests est déjà la version la plus récente (2.21.0-1).
python3-serial est déjà la version la plus récente (3.4-4).
python3-setuptools est déjà la version la plus récente (40.8.0-1).
rfkill est déjà la version la plus récente (2.33.1-0.1).
bluetooth est déjà la version la plus récente (5.50-1.2~deb10u1+rpt2).
libbluetooth-dev est déjà la version la plus récente (5.50-1.2~deb10u1+rpt2).
libssl-dev est déjà la version la plus récente (1.1.1d-0+deb10u3+rpt1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 589 non mis à jour.
Lecture des listes de paquets…
Construction de l'arbre des dépendances…
Lecture des informations d'état…
debconf: Impossible d'initialiser l'interface : Dialog
debconf: (L'interface dialog ne fonctionnera pas avec un terminal rustique (« dumb »), un tampon shell d'Emacs ou sans terminal de contrôle.)
debconf: Utilisation de l'interface Readline en remplacement
debconf: Impossible d'initialiser l'interface : Readline
debconf: (Cette interface a besoin d'un terminal de contrôle.)
debconf: Utilisation de l'interface Teletype en remplacement
dpkg-preconfigure: impossible de réouvrir stdin :
0 mis à jour, 0 nouvellement installés, 3 réinstallés, 0 à enlever et 589 non mis à jour.
Il est nécessaire de prendre 0 o/1 002 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
(Lecture de la base de données... 
(Lecture de la base de données... 5%
(Lecture de la base de données... 10%
(Lecture de la base de données... 15%
(Lecture de la base de données... 20%
(Lecture de la base de données... 25%
(Lecture de la base de données... 30%
(Lecture de la base de données... 35%
(Lecture de la base de données... 40%
(Lecture de la base de données... 45%
(Lecture de la base de données... 50%
(Lecture de la base de données... 55%
(Lecture de la base de données... 60%
(Lecture de la base de données... 65%
(Lecture de la base de données... 70%
(Lecture de la base de données... 75%
(Lecture de la base de données... 80%
(Lecture de la base de données... 85%
(Lecture de la base de données... 90%
(Lecture de la base de données... 95%
(Lecture de la base de données... 100%
(Lecture de la base de données... 155021 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../python3_3.7.3-1_armhf.deb ...
running python pre-rtupdate hooks for python3.7...
Dépaquetage de python3 (3.7.3-1) sur (3.7.3-1) ...
Préparation du dépaquetage de .../bluez_5.50-1.2~deb10u1+rpt2_armhf.deb ...
Dépaquetage de bluez (5.50-1.2~deb10u1+rpt2) sur (5.50-1.2~deb10u1+rpt2) ...
Préparation du dépaquetage de .../python3-pip_18.1-5+rpt1_all.deb ...
Dépaquetage de python3-pip (18.1-5+rpt1) sur (18.1-5+rpt1) ...
Paramétrage de python3 (3.7.3-1) ...
running python rtupdate hooks for python3.7...
running python post-rtupdate hooks for python3.7...
Paramétrage de bluez (5.50-1.2~deb10u1+rpt2) ...
Paramétrage de python3-pip (18.1-5+rpt1) ...
Traitement des actions différées (« triggers ») pour man-db (2.8.5-2) ...
Traitement des actions différées (« triggers ») pour dbus (1.12.20-0+deb10u1) ...
Traitement des actions différées (« triggers ») pour systemd (241-7~deb10u4+rpi1) ...
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
Could not fetch URL https://pypi.org/simple/setuptools/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/setuptools/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/setuptools/
Could not fetch URL https://www.piwheels.org/simple/setuptools/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/setuptools/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Requirement already up-to-date: setuptools in /usr/local/lib/python3.9/site-packages (49.2.1)
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Lecture des listes de paquets…
Construction de l'arbre des dépendances…
Lecture des informations d'état…
git est déjà la version la plus récente (1:2.20.1-2+deb10u3).
libglib2.0-dev est déjà la version la plus récente (2.58.3-2+deb10u2).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 589 non mis à jour.
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
Could not fetch URL https://pypi.org/simple/pyudev/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pyudev/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyudev/
Could not fetch URL https://www.piwheels.org/simple/pyudev/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pyudev/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement pyudev (from versions: none)
ERROR: No matching distribution found for pyudev
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
Could not fetch URL https://pypi.org/simple/pyserial/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pyserial/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pyserial/
Could not fetch URL https://www.piwheels.org/simple/pyserial/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pyserial/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement pyserial (from versions: none)
ERROR: No matching distribution found for pyserial
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
Could not fetch URL https://pypi.org/simple/requests/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/requests/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/requests/
Could not fetch URL https://www.piwheels.org/simple/requests/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/requests/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement requests (from versions: none)
ERROR: No matching distribution found for requests
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
Could not fetch URL https://pypi.org/simple/pybluez/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pybluez/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pybluez/
Could not fetch URL https://www.piwheels.org/simple/pybluez/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pybluez/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement pybluez (from versions: none)
ERROR: No matching distribution found for pybluez
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
Could not fetch URL https://pypi.org/simple/pillow/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pillow/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pillow/
Could not fetch URL https://www.piwheels.org/simple/pillow/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pillow/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement pillow (from versions: none)
ERROR: No matching distribution found for pillow
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
Could not fetch URL https://pypi.org/simple/numpy/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/numpy/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/

********************************************************

jahfly · Décembre 6, 2020, 5:24

Voila la suite

WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/numpy/
Could not fetch URL https://www.piwheels.org/simple/numpy/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/numpy/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement numpy (from versions: none)
ERROR: No matching distribution found for numpy
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: bluepy in /usr/local/lib/python3.9/site-packages (1.1.4)
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Clonage dans 'bluepy'...
running build
running build_py
creating build
creating build/lib
creating build/lib/bluepy
copying bluepy/scan_fuzz.py -> build/lib/bluepy
copying bluepy/btle.py -> build/lib/bluepy
copying bluepy/get_services.py -> build/lib/bluepy
copying bluepy/__init__.py -> build/lib/bluepy
copying bluepy/sensortag.py -> build/lib/bluepy
copying bluepy/thingy52.py -> build/lib/bluepy
copying bluepy/scanner.py -> build/lib/bluepy
copying bluepy/blescan.py -> build/lib/bluepy
copying bluepy/uuids.json -> build/lib/bluepy
copying bluepy/bluez-src.tgz -> build/lib/bluepy
copying bluepy/bluepy-helper.c -> build/lib/bluepy
copying bluepy/Makefile -> build/lib/bluepy
running install
Working dir is /tmp/bluepy
execute make -C ./bluepy clean
execute make -C bluepy -j1
running build
running build_py
copying bluepy/bluepy-helper -> build/lib/bluepy
running install_lib
copying build/lib/bluepy/scan_fuzz.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/btle.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/bluepy-helper -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/get_services.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/Makefile -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/__init__.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/sensortag.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/thingy52.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/scanner.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/uuids.json -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/bluez-src.tgz -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/blescan.py -> /usr/local/lib/python3.9/site-packages/bluepy
copying build/lib/bluepy/bluepy-helper.c -> /usr/local/lib/python3.9/site-packages/bluepy
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/scan_fuzz.py to scan_fuzz.cpython-39.pyc
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/btle.py to btle.cpython-39.pyc
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/get_services.py to get_services.cpython-39.pyc
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/__init__.py to __init__.cpython-39.pyc
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/sensortag.py to sensortag.cpython-39.pyc
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/thingy52.py to thingy52.cpython-39.pyc
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/scanner.py to scanner.cpython-39.pyc
byte-compiling /usr/local/lib/python3.9/site-packages/bluepy/blescan.py to blescan.cpython-39.pyc
running install_egg_info
running egg_info
creating bluepy.egg-info
writing bluepy.egg-info/PKG-INFO
writing dependency_links to bluepy.egg-info/dependency_links.txt
writing entry points to bluepy.egg-info/entry_points.txt
writing top-level names to bluepy.egg-info/top_level.txt
writing manifest file 'bluepy.egg-info/SOURCES.txt'
reading manifest file 'bluepy.egg-info/SOURCES.txt'
writing manifest file 'bluepy.egg-info/SOURCES.txt'
removing '/usr/local/lib/python3.9/site-packages/bluepy-1.1.4-py3.9.egg-info' (and everything under it)
Copying bluepy.egg-info to /usr/local/lib/python3.9/site-packages/bluepy-1.1.4-py3.9.egg-info
running install_scripts
Installing blescan script to /usr/local/bin
Installing sensortag script to /usr/local/bin
Installing thingy52 script to /usr/local/bin
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
Could not fetch URL https://pypi.org/simple/cryptography/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/cryptography/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/cryptography/
Could not fetch URL https://www.piwheels.org/simple/cryptography/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/cryptography/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement cryptography (from versions: none)
ERROR: No matching distribution found for cryptography
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
Could not fetch URL https://pypi.org/simple/pycrypto/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pycrypto/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/pycrypto/
Could not fetch URL https://www.piwheels.org/simple/pycrypto/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pycrypto/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
ERROR: Could not find a version that satisfies the requirement pycrypto (from versions: none)
ERROR: No matching distribution found for pycrypto
WARNING: pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.
Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping
Could not fetch URL https://www.piwheels.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='www.piwheels.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping

Merci par avance de votre aide

iPapy · Décembre 6, 2020, 7:03

Bonsoir,

Regarde du coté de ce post et récupère le zip d’ @olive qui à résolu le souci de bien des personnes

anon53349806 · Décembre 6, 2020, 7:06

Ton debian ma l’air pas clair
Tu es sur qu’il était a jour avant de lancer l’installation ?

Fabrice · Décembre 10, 2020, 8:57

Bonjour,

La réponse est non ;
0 mis à jour, 0 nouvellement installés, 0 à enlever et 589 non mis à jour.

Du coup, je n’arrive pas à comprendre quelle image a pu être utilisée pour faire une installation avec autant de package pas à jour.
@jahfly : Vous avez utilisé quoi pour installer votre Pi ?
En principe, c’est super simple, il faut utiliser Raspberry Pi Imager (officiel, version minimum 1.4) et installer la version Lite de Raspberry Pi OS depuis ce programme.
En faisant cela, vous avez une image qui a été créé depuis décembre 2020 et cette image n’a pas 600 packages pas à jour !

jahfly · Décembre 13, 2020, 6:29

Bonjour,

Me revoilà après pas mal de déboire.
Du coup je suis reparti sur une install propre.
Remise à zéro de jeedom et raspberry.
Installation de buster puis jeedom et enfin restauration d’une sauvegarde saine.
Mise à jour de jeedom et le tour est joué.
J’ai plus de problème tout fonctionne, Blea me trouve mes nuts.
C’est maintenant parti pour les scenarios.
Juste une dernière question, quelle est la différence entre présence et présence local dans mes équipements?

Fabrice · Décembre 13, 2020, 6:40

Bonsoir.
.je me doutais bien que votre version n’était pas bonne, dans ce monde il ne faut jamais garder les anciennes archives et toujours prendre les dernières.

Présence, c’est globalement présent et présence local, c’est uniquement sur l’antenne en question. Si vous n’avez qu’une antenne, c’est la même valeur.