Bonjour,
Je me décide à poster car je n’arrive pas à faire fonctionner mon Zigbee avec ce plugin.
La configuration toute neuve:
- RPI4B 4Go sur SSD
- Image Jeedom de janvier 2021 + mise à jour complète OS + package
- Clé ConBEE 2 sur port USb classique (pas USB 3)
- Clé AEOTEC Zwave
C’est une installation neuve pour un ami, il n’y a donc presque rien pour le moment, je me concentre sur le fonctionnement des protocoles choisi. Pour le Zwave aucun problème.
Pour le Zigbee, j’ai fait le choix de ce plugin Beta plutôt que Deconz, je l’ai donc acheté puis installé. j’ai aussi installé les dépendances sans soucis.
Au niveau de la configuration du plugin:
- Type de contrôleur : Deconz
- Type de clef: Auto
- Port Zigbee: Auto
- Port Interne: 8089
- Cycle: 0.3sec
- Channel: 11
Le démon est vert, le log n’indique pas d’erreur au lancement du démon.
Viens le moment d’inclure un capteur, c’est un AQARA Température et Humidité sensor, le classique carré. Il existe bien un fichier json pour ce capteur dans le plugin.
Je passe le plugin en inclusion et j’essai ensuite d’inclure le capteur (appui court, appui long 5sec, 10sec) rien ne se passe ! rien dans les logs que dalle.
Il y a une erreur dans le log qui me plait pas trop mais de quoi ça vient ?
[2021-01-10 16:10:54][DEBUG] : [ApplicationHandler.prepare] Json arg : {'duration': 180}
[2021-01-10 16:10:54][DEBUG] : Sending Zigbee broadcast with tsn 5 under 6 request id, data: b'05b400'
[2021-01-10 16:10:54][DEBUG] : Command Command.aps_data_request (17, 6, 0, <DeconzAddressEndpoint address_mode=1 address=65532 endpoint=None>, 0, 54, 0, b'\x05\xb4\x00', 2, 0)
[2021-01-10 16:10:54][DEBUG] : Send: 0x121d0018001100060001fcff0000360000030005b4000200
[2021-01-10 16:10:54][DEBUG] : Frame received: 0x121d00090002002206
[2021-01-10 16:10:54][DEBUG] : APS data request response: [2, <DeviceState.APSDE_DATA_REQUEST_SLOTS_AVAILABLE|2: 34>, 6]
[2021-01-10 16:10:54][DEBUG] : Frame received: 0x0e1e000700aa00
[2021-01-10 16:10:54][DEBUG] : Device state changed response: [<DeviceState.128|APSDE_DATA_REQUEST_SLOTS_AVAILABLE|APSDE_DATA_INDICATION|2: 170>, 0]
[2021-01-10 16:10:54][DEBUG] : Command Command.aps_data_indication (1, 1)
[2021-01-10 16:10:54][DEBUG] : Send: 0x171e000800010001
[2021-01-10 16:10:54][DEBUG] : Frame received: 0x171e0021001a002201fcff010200000000003600030005b40000af11df05000015
[2021-01-10 16:10:54][DEBUG] : APS data indication response: [26, <DeviceState.APSDE_DATA_REQUEST_SLOTS_AVAILABLE|2: 34>, <DeconzAddress address_mode=ADDRESS_MODE.GROUP address=0xfffc>, 1, <DeconzAddress address_mode=ADDRESS_MODE.NWK address=0x0000>, 0, 0, 54, b'\x05\xb4\x00', 0, 175, 17, 223, 5, 0, 0, 21]
[2021-01-10 16:10:54][DEBUG] : [0x0000:zdo] ZDO request ZDOCmd.Mgmt_Permit_Joining_req: [180, <Bool.false: 0>]
[2021-01-10 16:10:54][DEBUG] : 'aps_data_indication' response from <DeconzAddress address_mode=ADDRESS_MODE.NWK address=0x0000>, ep: 0, profile: 0x0000, cluster_id: 0x0036, data: b'05b400'
[2021-01-10 16:10:54][DEBUG] : Frame received: 0x0e1f000700a600
[2021-01-10 16:10:54][DEBUG] : Device state changed response: [<DeviceState.128|APSDE_DATA_REQUEST_SLOTS_AVAILABLE|APSDE_DATA_CONFIRM|2: 166>, 0]
[2021-01-10 16:10:54][DEBUG] : Command Command.aps_data_confirm (0,)
[2021-01-10 16:10:54][DEBUG] : Send: 0x041f0007000000
[2021-01-10 16:10:54][DEBUG] : Frame received: 0x041f0012000b00220601fcff00e100000000
[2021-01-10 16:10:54][DEBUG] : APS data confirm response for request with id 6: e1
[2021-01-10 16:10:54][DEBUG] : Request id: 0x06 'aps_data_confirm' for <DeconzAddressEndpoint address_mode=ADDRESS_MODE.GROUP address=0xfffc endpoint=None>, status: 0xe1
[2021-01-10 16:10:54][DEBUG] : Error while sending 6 req id broadcast: TXStatus.MAC_CHANNEL_ACCESS_FAILURE
[2021-01-10 16:10:54][DEBUG] : Command Command.write_parameter (2, <NetworkParameter.permit_join: 33>, b'\xb4')
[2021-01-10 16:10:54][DEBUG] : Send: 0x0b20000900020021b4
[2021-01-10 16:10:54][DEBUG] : Frame received: 0x0b20000800010021
[2021-01-10 16:10:54][DEBUG] : Write parameter permit_join: SUCCESS
[2021-01-10 16:10:54][INFO] : 200 PUT /application/include (127.0.0.1) 137.72ms
[2021-01-10 16:11:06][DEBUG] : Command Command.write_parameter (5, <NetworkParameter.watchdog_ttl: 38>, b'X\x02\x00\x00')
[2021-01-10 16:11:06][DEBUG] : Send: 0x0b21000c0005002658020000
[2021-01-10 16:11:06][DEBUG] : Frame received: 0x0b21000800010026
[2021-01-10 16:11:06][DEBUG] : Write parameter watchdog_ttl: SUCCESS
[2021-01-10 16:13:36][DEBUG] : Tries remaining: 3
[2021-01-10 16:13:36][DEBUG] : Sending Zigbee request with tsn 7 under 8 request id, data: b'0700'
[2021-01-10 16:13:36][DEBUG] : Command Command.aps_data_request (17, 8, 0, <DeconzAddressEndpoint address_mode=2 address=0x0000 endpoint=0>, 0, <ZDOCmd.Mgmt_Lqi_req: 0x0031>, 0, b'\x07\x00', 2, 0)
[2021-01-10 16:13:36][DEBUG] : Send: 0x122200180011000800020000000000310000020007000200
[2021-01-10 16:13:36][DEBUG] : Frame received: 0x122200090002002208
[2021-01-10 16:13:36][DEBUG] : APS data request response: [2, <DeviceState.APSDE_DATA_REQUEST_SLOTS_AVAILABLE|2: 34>, 8]
[2021-01-10 16:13:36][DEBUG] : Frame received: 0x0e23000700ae00
[2021-01-10 16:13:36][DEBUG] : Device state changed response: [<DeviceState.128|APSDE_DATA_REQUEST_SLOTS_AVAILABLE|APSDE_DATA_INDICATION|APSDE_DATA_CONFIRM|2: 174>, 0]
[2021-01-10 16:13:36][DEBUG] : Command Command.aps_data_indication (1, 1)
[2021-01-10 16:13:36][DEBUG] : Send: 0x1723000800010001
[2021-01-10 16:13:36][DEBUG] : Frame received: 0x17230023001c00260200000002000000000031800500070000000000af11eb05000015
[2021-01-10 16:13:36][DEBUG] : APS data indication response: [28, <DeviceState.APSDE_DATA_REQUEST_SLOTS_AVAILABLE|APSDE_DATA_CONFIRM|2: 38>, <DeconzAddress address_mode=ADDRESS_MODE.NWK address=0x0000>, 0, <DeconzAddress address_mode=ADDRESS_MODE.NWK address=0x0000>, 0, 0, 32817, b'\x07\x00\x00\x00\x00', 0, 175, 17, 235, 5, 0, 0, 21]
[2021-01-10 16:13:36][DEBUG] : 'aps_data_indication' response from <DeconzAddress address_mode=ADDRESS_MODE.NWK address=0x0000>, ep: 0, profile: 0x0000, cluster_id: 0x8031, data: b'0700000000'
[2021-01-10 16:13:36][DEBUG] : Command Command.aps_data_confirm (0,)
[2021-01-10 16:13:36][DEBUG] : Send: 0x04240007000000
[2021-01-10 16:13:36][DEBUG] : Frame received: 0x04240013000c00220802000000000000000000
[2021-01-10 16:13:36][DEBUG] : APS data confirm response for request with id 8: 00
[2021-01-10 16:13:36][DEBUG] : Request id: 0x08 'aps_data_confirm' for <DeconzAddressEndpoint address_mode=ADDRESS_MODE.NWK address=0x0000 endpoint=0>, status: 0x00
[2021-01-10 16:13:36][DEBUG] : [0x0000] request status: Status.SUCCESS. response: Neighbors(entries=0, start_index=0, neighbor_table_list=[])
[2021-01-10 16:13:36][DEBUG] : [0x0000] Done scanning. Total 0 neighbours
[2021-01-10 16:13:36][DEBUG] : executing functools.partial(<built-in method execute of sqlite3.Connection object at 0x7fa82339d0>, 'DELETE FROM neighbors WHERE device_ieee = ?', (00:21:2e:ff:ff:06:94:8e,))
[2021-01-10 16:13:36][DEBUG] : returning <sqlite3.Cursor object at 0x7fa8226b90>
[2021-01-10 16:13:36][DEBUG] : executing functools.partial(<built-in method executemany of sqlite3.Connection object at 0x7fa82339d0>, 'INSERT INTO neighbors VALUES (?, ?, ?, ?, ?, ?, ?, ?)', [])
[2021-01-10 16:13:36][DEBUG] : returning <sqlite3.Cursor object at 0x7fa8226c70>
[2021-01-10 16:13:36][DEBUG] : executing functools.partial(<built-in method commit of sqlite3.Connection object at 0x7fa82339d0>)
[2021-01-10 16:13:36][DEBUG] : returning None