Perte communication équipement zigbee sur redémarrage

Tags: #<Tag:0x00007f3852637c70>

Bonjour, j’ai plusieurs équipements ( détecteurs de mouvements Xiami) qui fonctionnement en Zigbee.
Suite à un redémarrage de Jeedom, j’ai la moité de mes équipements qui n’arrivent plus à remonter alors que l’autre moitié fonctionne correctement.
Je ne vois pas de différence de paramétrage entre les détecteurs.
Avez vous une idée pourquoi cela arrive t’il?
merci
Capture

Bonjour @theguilt,

Pour que la communauté puisse t’aider, je t’invite à lire ce post, merci,


Sans cela tu risque de ne pas avoir beaucoup d’aide.

bonjour, j’ai fait quelque chose de mal?
merci

De mal non mais il manque beaucoup d’information sur ta config et j’ai corrigé ton tag :wink:

version jeedom et type de matériel
version plugin (stable/beta) date
version raspbian
log en debug

ah pardon:
version Jeedom: 3.3.53
version Plugin : 3.1.7
sous debian.
les log en debug:

Let s start
[2020-09-06 14:28:46][debug] AbeilleCmd constructor start
[2020-09-06 14:28:46][debug] AbeilleCmdQueue constructor start
[2020-09-06 14:28:46][debug] Recuperation des queues de messages
[2020-09-06 14:28:46][debug] AbeilleCmdQueue constructor end
[2020-09-06 14:28:46][debug] AbeilleCmd constructor end
[2020-09-06 14:28:46][debug] tempoMessageQueue: 0 -
[2020-09-06 14:28:47][debug] Message pulled from queue queueKeyAbeilleToCmd: CmdAbeille1/Ruche/startNetwork -> StartNetwork
[2020-09-06 14:28:47][debug] ----------
[2020-09-06 14:28:47][info ] procmsg fct - message: {"topic":"CmdAbeille1\/Ruche\/startNetwork","payload":"StartNetwork","priority":4}
[2020-09-06 14:28:47][debug] processCmd fct - begin processCmd function, Command: {"startNetwork":"StartNetwork","priority":4,"dest":"Abeille1"}
[2020-09-06 14:28:47][debug] sendCmd fct - dest: "Abeille1" cmd: "0024" priority: 4
[2020-09-06 14:28:47][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-09-06 14:28:47][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0024-0000-
[2020-09-06 14:28:47][debug] Message pulled from queue queueKeyAbeilleToCmd: CmdAbeille1/Ruche/setTimeServer ->
[2020-09-06 14:28:47][debug] ----------
[2020-09-06 14:28:47][info ] procmsg fct - message: {"topic":"CmdAbeille1\/Ruche\/setTimeServer","payload":"","priority":4}
[2020-09-06 14:28:47][debug] processCmd fct - begin processCmd function, Command: {"setTimeServer":"","priority":4,"dest":"Abeille1"}
[2020-09-06 14:28:47][debug] setTimeServer
[2020-09-06 14:28:47][debug] sendCmd fct - dest: "Abeille1" cmd: "0016" priority: 4
[2020-09-06 14:28:47][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-09-06 14:28:47][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0016-0004-5f54d5ff
[2020-09-06 14:28:47][debug] Message pulled from queue queueKeyAbeilleToCmd: CmdAbeille1/Ruche/getNetworkStatus -> getNetworkStatus
[2020-09-06 14:28:47][debug] ----------
[2020-09-06 14:28:47][info ] procmsg fct - message: {"topic":"CmdAbeille1\/Ruche\/getNetworkStatus","payload":"getNetworkStatus","priority":4}
[2020-09-06 14:28:47][debug] processCmd fct - begin processCmd function, Command: {"getNetworkStatus":"getNetworkStatus","priority":4,"dest":"Abeille1"}
[2020-09-06 14:28:47][debug] sendCmd fct - dest: "Abeille1" cmd: "0009" priority: 4
[2020-09-06 14:28:47][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-09-06 14:28:47][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0009-0000-
[2020-09-06 14:29:04][debug] Message pulled from queue queueKeyAbeilleToCmd: TempoCmdAbeille1/Ruche/getVersion&time=1599395364 -> Version
[2020-09-06 14:29:04][debug] ----------
[2020-09-06 14:29:04][info ] procmsg fct - message: {"topic":"TempoCmdAbeille1\/Ruche\/getVersion&time=1599395364","payload":"Version","priority":4}
[2020-09-06 14:29:04][debug] procmsg fct - topic: Ajoutons le message a queue Tempo.
[2020-09-06 14:29:04][debug] Message pulled from queue queueKeyAbeilleToCmd: TempoCmdAbeille1/Ruche/getNetworkStatus&time=1599395368 -> getNetworkStatus
[2020-09-06 14:29:04][debug] ----------
[2020-09-06 14:29:04][info ] procmsg fct - message: {"topic":"TempoCmdAbeille1\/Ruche\/getNetworkStatus&time=1599395368","payload":"getNetworkStatus","priority":4}
[2020-09-06 14:29:04][debug] procmsg fct - topic: Ajoutons le message a queue Tempo.
[2020-09-06 14:29:17][debug] tempoMessageQueue: 2 - cmdQueue: 1 nb message: 0 -
[2020-09-06 14:29:25][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille1/Ruche/getVersion -> Version
[2020-09-06 14:29:25][debug] ----------
[2020-09-06 14:29:25][info ] procmsg fct - message: {"topic":"CmdAbeille1\/Ruche\/getVersion","payload":"Version","priority":4}
[2020-09-06 14:29:25][debug] processCmd fct - begin processCmd function, Command: {"getVersion":"Version","priority":4,"dest":"Abeille1"}
[2020-09-06 14:29:25][debug] processCmd fct - Get Version
[2020-09-06 14:29:25][debug] sendCmd fct - dest: "Abeille1" cmd: "0010" priority: 4
[2020-09-06 14:29:25][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-09-06 14:29:25][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0010-0000-
[2020-09-06 14:29:29][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille1/Ruche/getNetworkStatus -> getNetworkStatus
[2020-09-06 14:29:29][debug] ----------
[2020-09-06 14:29:29][info ] procmsg fct - message: {"topic":"CmdAbeille1\/Ruche\/getNetworkStatus","payload":"getNetworkStatus","priority":4}
[2020-09-06 14:29:29][debug] processCmd fct - begin processCmd function, Command: {"getNetworkStatus":"getNetworkStatus","priority":4,"dest":"Abeille1"}
[2020-09-06 14:29:29][debug] sendCmd fct - dest: "Abeille1" cmd: "0009" priority: 4
[2020-09-06 14:29:29][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-09-06 14:29:29][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0009-0000-
[2020-09-06 14:29:48][debug] tempoMessageQueue: 0 - cmdQueue: 1 nb message: 0 -
[2020-09-06 14:30:05][debug] Message pulled from queue queueKeyAbeilleToCmd: TempoCmdAbeille1/Ruche/getVersion&time=1599395425 -> Version
[2020-09-06 14:30:05][debug] ----------
[2020-09-06 14:30:05][info ] procmsg fct - message: {"topic":"TempoCmdAbeille1\/Ruche\/getVersion&time=1599395425","payload":"Version","priority":4}
[2020-09-06 14:30:05][debug] procmsg fct - topic: Ajoutons le message a queue Tempo.
[2020-09-06 14:30:05][debug] Message pulled from queue queueKeyAbeilleToCmd: TempoCmdAbeille1/Ruche/getNetworkStatus&time=1599395429 -> getNetworkStatus
[2020-09-06 14:30:05][debug] ----------
[2020-09-06 14:30:05][info ] procmsg fct - message: {"topic":"TempoCmdAbeille1\/Ruche\/getNetworkStatus&time=1599395429","payload":"getNetworkStatus","priority":4}
[2020-09-06 14:30:05][debug] procmsg fct - topic: Ajoutons le message a queue Tempo.
[2020-09-06 14:30:19][debug] tempoMessageQueue: 2 - cmdQueue: 1 nb message: 0 -
[2020-09-06 14:30:26][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille1/Ruche/getVersion -> Version
[2020-09-06 14:30:26][debug] ----------
[2020-09-06 14:30:26][info ] procmsg fct - message: {"topic":"CmdAbeille1\/Ruche\/getVersion","payload":"Version","priority":4}
[2020-09-06 14:30:26][debug] processCmd fct - begin processCmd function, Command: {"getVersion":"Version","priority":4,"dest":"Abeille1"}
[2020-09-06 14:30:26][debug] processCmd fct - Get Version
[2020-09-06 14:30:26][debug] sendCmd fct - dest: "Abeille1" cmd: "0010" priority: 4
[2020-09-06 14:30:26][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-09-06 14:30:26][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0010-0000-
[2020-09-06 14:30:30][debug] Message pulled from queue queueKeyCmdToCmd: CmdAbeille1/Ruche/getNetworkStatus -> getNetworkStatus
[2020-09-06 14:30:30][debug] ----------
[2020-09-06 14:30:30][info ] procmsg fct - message: {"topic":"CmdAbeille1\/Ruche\/getNetworkStatus","payload":"getNetworkStatus","priority":4}
[2020-09-06 14:30:30][debug] processCmd fct - begin processCmd function, Command: {"getNetworkStatus":"getNetworkStatus","priority":4,"dest":"Abeille1"}
[2020-09-06 14:30:30][debug] sendCmd fct - dest: "Abeille1" cmd: "0009" priority: 4
[2020-09-06 14:30:30][debug] J'ai 1 commande(s) pour la zigate a envoyer.
[2020-09-06 14:30:30][debug]  =================> Envoi de la commande a la zigate: /dev/ttyUSB0-0009-0000-
[2020-09-06 14:30:50][debug] tempoMessageQueue: 0 - cmdQueue: 1 nb message: 0 -

[2020-09-06 14:26:18][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:26:18][DEBUG] : deamon_info(): Terminé, return={"state":"ok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"3"}
[2020-09-06 14:26:18][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:26:18][DEBUG] : deamon_info(): Terminé, return={"state":"ok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"3"}
[2020-09-06 14:26:23][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:26:23][DEBUG] : deamon_info(): Terminé, return={"state":"ok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"3"}
[2020-09-06 14:26:29][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:26:29][DEBUG] : deamon_info(): Terminé, return={"state":"ok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"3"}
[2020-09-06 14:26:29][DEBUG] : deamon_stop(): Démarrage
[2020-09-06 14:26:30][DEBUG] : deamon_stop(): Killing deamons socat:
[2020-09-06 14:26:30][DEBUG] : deamon stop: Killing deamons: !27031 27033 27035
[2020-09-06 14:26:30][DEBUG] : deamon_stop(): Arret du cron
[2020-09-06 14:26:30][DEBUG] : deamon_stop(): Terminé
[2020-09-06 14:28:42][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getVersion&time=1599395342 payload: Version vers 123
[2020-09-06 14:28:42][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getVersion&time=1599395342","payload":"Version"}} on queue: 123
[2020-09-06 14:28:42][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getNetworkStatus&time=1599395346 payload: getNetworkStatus vers 123
[2020-09-06 14:28:42][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getNetworkStatus&time=1599395346","payload":"getNetworkStatus"}} on queue: 123
[2020-09-06 14:28:42][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getVersion&time=1599395342 payload: Version vers 123
[2020-09-06 14:28:42][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getVersion&time=1599395342","payload":"Version"}} on queue: 123
[2020-09-06 14:28:42][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getNetworkStatus&time=1599395346 payload: getNetworkStatus vers 123
[2020-09-06 14:28:42][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getNetworkStatus&time=1599395346","payload":"getNetworkStatus"}} on queue: 123
[2020-09-06 14:28:44][WARNING] : deamon_info(): Le cron ne tourne pas
[2020-09-06 14:28:44][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:28:44][DEBUG] : deamon_info(), ooooooooooo: /dev/ttyUSB0
[2020-09-06 14:28:44][INFO] : deamon_info(): ---------found 0 running / 3 expected.
[2020-09-06 14:28:44][DEBUG] : deamon_info(): Terminé, return={"state":"nok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"0"}
[2020-09-06 14:28:44][DEBUG] : deamon_start(): Démarrage
[2020-09-06 14:28:44][WARNING] : -------------------------------------> dependancy_info()
[2020-09-06 14:28:44][WARNING] : deamon_info(): Le cron ne tourne pas
[2020-09-06 14:28:44][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:28:44][DEBUG] : deamon_info(), ooooooooooo: /dev/ttyUSB0
[2020-09-06 14:28:44][INFO] : deamon_info(): ---------found 0 running / 3 expected.
[2020-09-06 14:28:44][DEBUG] : deamon_info(): Terminé, return={"state":"nok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"0"}
[2020-09-06 14:28:44][DEBUG] : dependancy_info: {"state":"ok","progress_file":"\/tmp\/jeedom\/Abeille\/dependance"}
[2020-09-06 14:28:44][DEBUG] : deamon_stop(): Démarrage
[2020-09-06 14:28:44][DEBUG] : deamon_stop(): Killing deamons socat:
[2020-09-06 14:28:44][DEBUG] : deamon stop: Killing deamons: !
[2020-09-06 14:28:45][DEBUG] : deamon_stop(): Arret du cron
[2020-09-06 14:28:45][DEBUG] : deamon_stop(): Terminé
[2020-09-06 14:28:45][DEBUG] : deamon_start_cleanup(): Démarrage
[2020-09-06 14:28:45][DEBUG] : deamon_start_cleanup(): Terminé
[2020-09-06 14:28:45][DEBUG] : deamon_start(): 1 zigate(s) définie(s)
[2020-09-06 14:28:45][DEBUG] : deamon_start(): Zigate1 (/dev/ttyUSB0): active=Y
[2020-09-06 14:28:45][INFO] : Démarrage des démons.
[2020-09-06 14:28:45][DEBUG] : deamon_start(): Lancement démon: /usr/bin/nohup /usr/bin/php /var/www/html/plugins/Abeille/core/class/../../core/class/AbeilleSerialRead.php Abeille1 /dev/ttyUSB0 debug > /var/www/html/core/class/../../log/AbeilleSerialRead1
[2020-09-06 14:28:45][DEBUG] : deamon_start(): Lancement démon: /usr/bin/nohup /usr/bin/php /var/www/html/plugins/Abeille/core/class/../../core/class/AbeilleParser.php debug > /var/www/html/core/class/../../log/AbeilleParser
[2020-09-06 14:28:45][DEBUG] : deamon_start(): Lancement démon: /usr/bin/nohup /usr/bin/php /var/www/html/plugins/Abeille/core/class/../../core/class/AbeilleCmd.php debug > /var/www/html/core/class/../../log/AbeilleCmd
[2020-09-06 14:28:47][DEBUG] : deamon_start(): ***** Envoi de la creation de ruche par défaut ********
[2020-09-06 14:28:47][DEBUG] : deamon_start(): ***** ruche 1 (Abeille): ttyUSB0
[2020-09-06 14:28:47][DEBUG] : Envoi du message topic: CmdRuche/Ruche/CreateRuche payload: Abeille1 vers 121
[2020-09-06 14:28:47][DEBUG] : Msg sent: {"message":{"topic":"CmdRuche\/Ruche\/CreateRuche","payload":"Abeille1"}} on queue: 121
[2020-09-06 14:28:47][DEBUG] : deamon_start(): ***** Demarrage du réseau Zigbee 1 ********
[2020-09-06 14:28:47][DEBUG] : Envoi du message topic: CmdAbeille1/Ruche/startNetwork payload: StartNetwork vers 123
[2020-09-06 14:28:47][DEBUG] : Msg sent: {"message":{"topic":"CmdAbeille1\/Ruche\/startNetwork","payload":"StartNetwork"}} on queue: 123
[2020-09-06 14:28:47][DEBUG] : deamon_start(): ***** Set Time réseau Zigbee 1 ********
[2020-09-06 14:28:47][DEBUG] : Envoi du message topic: CmdAbeille1/Ruche/setTimeServer payload:  vers 123
[2020-09-06 14:28:47][DEBUG] : Msg sent: {"message":{"topic":"CmdAbeille1\/Ruche\/setTimeServer","payload":""}} on queue: 123
[2020-09-06 14:28:47][DEBUG] : deamon_start(): ***** getNetworkStatus 1 ********
[2020-09-06 14:28:47][DEBUG] : Envoi du message topic: CmdAbeille1/Ruche/getNetworkStatus payload: getNetworkStatus vers 123
[2020-09-06 14:28:47][DEBUG] : Msg sent: {"message":{"topic":"CmdAbeille1\/Ruche\/getNetworkStatus","payload":"getNetworkStatus"}} on queue: 123
[2020-09-06 14:28:47][DEBUG] : deamon_start(): Terminé
[2020-09-06 14:28:47][DEBUG] : message: createRuche: objet: Abeille1/Ruche existe deja
[2020-09-06 14:28:47][DEBUG] : message(topic='Abeille1/Ruche/Network-Status', payload='Network (already) formed')
[2020-09-06 14:28:50][DEBUG] : message(topic='Abeille1/Ruche/Short-Addr', payload='00')
[2020-09-06 14:28:50][DEBUG] : message(topic='Abeille1/Ruche/IEEE-Addr', payload='')
[2020-09-06 14:28:50][DEBUG] : IEEE-Addr; =><= ; IEEE non valable pour un equipement, valeur rejetée: Ruche: IEEE =><=
[2020-09-06 14:28:50][DEBUG] : message(topic='Abeille1/Ruche/Network-Channel', payload='0')
[2020-09-06 14:28:50][DEBUG] : message(topic='Abeille1/Ruche/Short-Addr', payload='0000')
[2020-09-06 14:28:50][DEBUG] : message(topic='Abeille1/Ruche/IEEE-Addr', payload='00158D0001ED44BC')
[2020-09-06 14:28:51][DEBUG] : message(topic='Abeille1/Ruche/PAN-ID', payload='10d2')
[2020-09-06 14:28:51][DEBUG] : message(topic='Abeille1/Ruche/Ext_PAN-ID', payload='ad6b6f99c34b14bd')
[2020-09-06 14:28:51][DEBUG] : message(topic='Abeille1/Ruche/Network-Channel', payload='11')
[2020-09-06 14:29:04][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getVersion&time=1599395364 payload: Version vers 123
[2020-09-06 14:29:04][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getVersion&time=1599395364","payload":"Version"}} on queue: 123
[2020-09-06 14:29:04][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getNetworkStatus&time=1599395368 payload: getNetworkStatus vers 123
[2020-09-06 14:29:04][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getNetworkStatus&time=1599395368","payload":"getNetworkStatus"}} on queue: 123
[2020-09-06 14:29:25][DEBUG] : message(topic='Abeille1/Ruche/SW-Application', payload='0002')
[2020-09-06 14:29:25][DEBUG] : message(topic='Abeille1/Ruche/SW-SDK', payload='030e')
[2020-09-06 14:29:29][DEBUG] : message(topic='Abeille1/Ruche/Short-Addr', payload='0000')
[2020-09-06 14:29:29][DEBUG] : message(topic='Abeille1/Ruche/IEEE-Addr', payload='00158D0001ED44BC')
[2020-09-06 14:29:29][DEBUG] : message(topic='Abeille1/Ruche/PAN-ID', payload='10d2')
[2020-09-06 14:29:29][DEBUG] : message(topic='Abeille1/Ruche/Ext_PAN-ID', payload='ad6b6f99c34b14bd')
[2020-09-06 14:29:29][DEBUG] : message(topic='Abeille1/Ruche/Network-Channel', payload='11')
[2020-09-06 14:30:05][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getVersion&time=1599395425 payload: Version vers 123
[2020-09-06 14:30:05][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getVersion&time=1599395425","payload":"Version"}} on queue: 123
[2020-09-06 14:30:05][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getNetworkStatus&time=1599395429 payload: getNetworkStatus vers 123
[2020-09-06 14:30:05][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getNetworkStatus&time=1599395429","payload":"getNetworkStatus"}} on queue: 123
[2020-09-06 14:30:05][DEBUG] : Starting cron15 ------------------------------------------------------------------------------------------------------------------------
[2020-09-06 14:30:05][DEBUG] : Check USB driver potential crash
[2020-09-06 14:30:06][DEBUG] : Ping NE with 220V to check Online status
[2020-09-06 14:30:06][DEBUG] : Get etat and Level des ampoules
[2020-09-06 14:30:06][DEBUG] : Ending cron15 ------------------------------------------------------------------------------------------------------------------------
[2020-09-06 14:30:06][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:30:06][DEBUG] : deamon_info(): Terminé, return={"state":"ok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"3"}
[2020-09-06 14:30:13][DEBUG] : deamon_info(): Zigate1 est active (/dev/ttyUSB0)
[2020-09-06 14:30:13][DEBUG] : deamon_info(): Terminé, return={"state":"ok","launchable":"ok","launchable_message":"","nbProcessExpected":3,"nbProcess":"3"}
[2020-09-06 14:30:26][DEBUG] : message(topic='Abeille1/Ruche/SW-Application', payload='0002')
[2020-09-06 14:30:26][DEBUG] : message(topic='Abeille1/Ruche/SW-SDK', payload='030e')
[2020-09-06 14:30:30][DEBUG] : message(topic='Abeille1/Ruche/Short-Addr', payload='0000')
[2020-09-06 14:30:30][DEBUG] : message(topic='Abeille1/Ruche/IEEE-Addr', payload='00158D0001ED44BC')
[2020-09-06 14:30:30][DEBUG] : message(topic='Abeille1/Ruche/PAN-ID', payload='10d2')
[2020-09-06 14:30:30][DEBUG] : message(topic='Abeille1/Ruche/Ext_PAN-ID', payload='ad6b6f99c34b14bd')
[2020-09-06 14:30:30][DEBUG] : message(topic='Abeille1/Ruche/Network-Channel', payload='11')
[2020-09-06 14:31:04][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getVersion&time=1599395484 payload: Version vers 123
[2020-09-06 14:31:04][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getVersion&time=1599395484","payload":"Version"}} on queue: 123
[2020-09-06 14:31:04][DEBUG] : Envoi du message topic: TempoCmdAbeille1/Ruche/getNetworkStatus&time=1599395488 payload: getNetworkStatus vers 123
[2020-09-06 14:31:04][DEBUG] : Msg sent: {"message":{"topic":"TempoCmdAbeille1\/Ruche\/getNetworkStatus&time=1599395488","payload":"getNetworkStatus"}} on queue: 123
[2020-09-06 14:31:25][DEBUG] : message(topic='Abeille1/Ruche/SW-Application', payload='0002')
[2020-09-06 14:31:25][DEBUG] : message(topic='Abeille1/Ruche/SW-SDK', payload='030e')
[2020-09-06 14:31:29][DEBUG] : message(topic='Abeille1/Ruche/Short-Addr', payload='0000')
[2020-09-06 14:31:29][DEBUG] : message(topic='Abeille1/Ruche/IEEE-Addr', payload='00158D0001ED44BC')
[2020-09-06 14:31:29][DEBUG] : message(topic='Abeille1/Ruche/PAN-ID', payload='10d2')
[2020-09-06 14:31:29][DEBUG] : message(topic='Abeille1/Ruche/Ext_PAN-ID', payload='ad6b6f99c34b14bd')
[2020-09-06 14:31:29][DEBUG] : message(topic='Abeille1/Ruche/Network-Channel', payload='11')

Alors pour celui qui est missig essai de le réveiller mais j’ai peur que tu vas devoir le ré-inclure pour l’autre en timeout un réveille devrait suffire

Cela m’arrive parfois suite à un redémarrage il faut laisser au fil des heures cela remonte

Je suis d’accord avec toi mais là les deux qui remonte pas sont en timeout depuis le 02 Septembre

en effet :slight_smile:

Le missing le réveiller comment?

tu te met en mode inclusion et tu appuie sur le bouton 3s

Je vais essayer

Il s’est réveillé. Mes capteurs de mouvements sont installés en hauteurs je ne peux pas me permettre de faire une inclusion et aller appuyer a chaque coupure électrique.
A t’il une solution fiable?
Merci

hello,

Normalement ça remonte en moins d’une heure, sinon faudra réinclure et ça sera transparent vu qu’il connait déjà le matos. Si tu veux éviter ça met un onduleur sur ta prod :slight_smile:

Je comprends bien mais je vois pas pourquoi certains fonctionnent niquel et pas d’autre.
Si je les exclus et que je les re inclus es ce que ça changera quelque chose?
Merci

Re,

1er avis je dirais limite de portée
donc un coup je te vois un coup je te vois pas, on a pas d’info pour juger
distance, contrôleur zigbee …

2 J'aimes

Je pourrai peut être rajouter une clef zigbee en plus?
Je regarde demain pour donner toutes les infos
Merci

clef zigate usb.
distance: 5m avec une cloison entre

Mauvaise idée une abeille ne peut être associée qu’a une ruche …

Tu peut par contre utiliser un équipement routeur (comme une lampe ou un son-off par exemple) qui soit a mi chemin de tes capteurs sur pile …

Capture d’écran du 2020-09-07 01-16-42

Et ça réglerai le problème de perte de certains capteurs au redémarrage de jeedom?