Passerellle Hager TH101

lionell · Octobre 25, 2020, 5:33

Bonjour, j’ai une interface KNX hager USB TH101. Lors du redémarrage de jeedom V4, le pluging EIB-KNX se lance bien mais il n’y a pas de communication sur le bus. Je suis obligé de redémarrer le Demon pour que cela refonctionne. Pourtant le demon est bien en vert
.
![image|590x211](upload://70tTqZVLq90q1AlQWCCQngRdIfj.png

Poluket · Octobre 25, 2020, 7:12

Ajoute le tag plugin-knx sinon @mika-nt28 ne verra pas le message. As tu des logs a nous donner?

mika-nt28 · Octobre 26, 2020, 6:43

Etrange ca.
Il n’y a aucune communication?

lionell · Octobre 26, 2020, 8:16

Non, je dois redémarrer le démon et là tout est ok. Le soucis c’est en cas de coupure de courant.

Poluket · Octobre 26, 2020, 8:18

tu es sur quel hardware? p-e que la passerelle n’est pas encore bien démarrée avant que jeedom lance le deamon? tu as quoi ds les logs en mode debug?

mika-nt28 · Octobre 26, 2020, 11:41

Tu as installé knxd?
Peux tu en ssh verifier

sudo systemctl status knxd.service
sudo systemctl status knxd.socket

et si toujours actif

sudo systemctl stop knxd.service
sudo systemctl stop knxd.socket 
sudo systemctl disable knxd.service
sudo systemctl disable knxd.socket

lionell · Octobre 31, 2020, 4:29

Bonjour, j’ai ca comme résultat

lionell · Octobre 31, 2020, 4:32

ET LE LOG

Jeedom: Layer 4 [ 1:main        0.000] initialized
Jeedom: Layer 4 [ 1:main        0.000] setting up
Jeedom: Layer 3 [ 4:server/Server      0.001] registerLink: 4:server
Jeedom: Layer 3 [11:A.tcp/inet         0.001] registerLink: 11:A.tcp
Jeedom: Layer 3 [15:B.usb/Conn         0.001] registerLink: 15:B.usb
Jeedom: Layer 4 [ 1:main               0.001] setup OK
Jeedom: Layer 4 [ 1:main               0.001] trigger going up
Jeedom: Layer 3 [15:B.usb/Conn         0.001] Start: cfg:B.usb
Jeedom: Layer 5 [15:B.usb/Conn         0.001] down => >up
Jeedom: Layer 5 [15:B.usb/Conn         0.001] Starting
Jeedom: Layer 1 [18:B.usb/usbL         0.016] Detect
libusb: error [_get_usbfs_fd] libusb couldn't open USB device /dev/bus/usb/001/004: Permission denied
libusb: error [_get_usbfs_fd] libusb requires write access to USB device nodes.
Jeedom: Layer 1 [18:B.usb/usbL         0.017] No matching endpoint found.
Jeedom: Layer 1 [18:B.usb/usbL         0.017] Close G
Jeedom: Layer 1 [18:B.usb/usbL         0.017] Release
Jeedom: Layer 4 [15:B.usb/Conn         0.019] link state changed: >up
Jeedom: Layer 3 [ 4:server/Server      0.019] Start: cfg:server
Jeedom: Layer 5 [ 4:server/Server      0.019] down => >up
Jeedom: Layer 8 [ 4:server/Server      0.019] Open
Jeedom: Layer 0 [ 4:server/Server      0.024] Open
Jeedom: Layer 0 [ 4:server/Server      0.025] Opened
Jeedom: Layer 8 [22:router/driver      0.025] OpenD
Jeedom: Layer 8 [22:router/driver      0.029] OpenedD
Jeedom: Layer 3 [21:router/ConnC       0.029] registerLink: 21:router_21
Jeedom: Layer 3 [21:router/ConnC       0.029] Start: cfg:router
Jeedom: Layer 5 [21:router/ConnC       0.029] down => >up
Jeedom: Layer 5 [21:router/ConnC       0.029] Starting
Jeedom: Layer 5 [21:router/ConnC       0.029] >up => up
Jeedom: Layer 4 [21:router/ConnC       0.029] link state changed: up
Jeedom: Layer 5 [21:router/ConnC       0.029] Started
Jeedom: Layer 4 [21:router/ConnC       0.029] link state changed: up
Jeedom: Layer 8 [ 4:server/Server      0.029] Opened
Jeedom: Layer 5 [ 4:server/Server      0.029] >up => up
Jeedom: Layer 4 [ 4:server/Server      0.029] link state changed: up
Jeedom: Layer 5 [ 4:server/Server      0.029] Started
Jeedom: Layer 4 [ 4:server/Server      0.029] link state changed: up
Jeedom: Layer 3 [11:A.tcp/inet         0.029] Start: cfg:A.tcp
Jeedom: Layer 5 [11:A.tcp/inet         0.029] down => >up
Jeedom: Layer 8 [11:A.tcp/inet         0.029] OpenInetSocket 6720
Jeedom: Layer 8 [11:A.tcp/inet         0.030] InetSocket opened
Jeedom: Layer 5 [11:A.tcp/inet         0.030] >up => up
Jeedom: Layer 4 [11:A.tcp/inet         0.030] link state changed: up
Jeedom: Layer 5 [11:A.tcp/inet         0.030] Started
Jeedom: Layer 4 [11:A.tcp/inet         0.031] link state changed: up
Jeedom: Layer 4 [ 1:main               0.031] going up triggered
Jeedom: Layer 4 [ 1:main               0.032] check start
Jeedom: Layer 4 [15:B.usb/Conn         0.032] state is >up
Jeedom: Layer 4 [ 1:main               0.032] check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 0
Jeedom: Layer 8 [11:A.tcp/inet         0.694] New Connection
Jeedom: Layer 8 [24:A.tcp/CConn        0.694] ClientConnection Init
Jeedom: Layer 3 [24:A.tcp/CConn        0.694] Allocate 15.15.0
Jeedom: Layer 0 [24:A.tcp/CConn        0.694] ReadMessage(005): 00 26 20 20 00
Jeedom: Layer 7 [25:A.tcp@15.15.0/GS   0.694] OpenGroupSocket
Jeedom: Layer 4 [27:A.tcp/LineDr       0.694] OpenGroupSocket RW
Jeedom: Layer 0 [24:A.tcp/CConn        0.694] Send(002): 00 26
Jeedom: Layer 7 [25:A.tcp@15.15.0/GS   0.694] OpenGroupSocket complete
Jeedom: Layer 3 [26:A.tcp/ConnS        0.694] registerLink: 26:A.tcp_26
Jeedom: Layer 3 [26:A.tcp/ConnS        0.694] Start: cfg:A.tcp
Jeedom: Layer 5 [26:A.tcp/ConnS        0.694] down => >up
Jeedom: Layer 5 [26:A.tcp/ConnS        0.694] Starting
Jeedom: Layer 5 [26:A.tcp/ConnS        0.694] >up => up
Jeedom: Layer 4 [26:A.tcp/ConnS        0.694] link state changed: up
Jeedom: Layer 5 [26:A.tcp/ConnS        0.694] Started
Jeedom: Layer 4 [26:A.tcp/ConnS        0.695] link state changed: up
Jeedom: Layer 4 [ 1:main               0.695] check start
Jeedom: Layer 4 [15:B.usb/Conn         0.695] state is >up
Jeedom: Layer 4 [ 1:main               0.695] check end: want_up 1 some 1>1 all 0>0, going 1 up 3 down 0

lionell · Octobre 31, 2020, 4:33