Nouveau plugin AirzoneWeb

Plugins Confort
1

Bonjour.

Je viens d’installer le nouveau plugin AirzoneWeb officiel. Je pense que vous l’avez réalisé en partant de la base du plugin non officiel airzone car c’est en grande partie le même code dans le core.

J’ai un système avec deux unités et donc deux systemes qui eux meme ont plusieurs zones.

Le plugin ne me trouve que le système ID 2 et non pas le 1 je n’ai donc que la moitié de mes équipements.

systemID : 2

Mais il ne récupère pas les équipements systemID 1 (un système ID étant un caisson gainable en gros)

Cela fonctionnait sur l’autre plugin non officiel Airzone.

Merci d’avance !

[2021-11-10 22:21:27][INFO] : DATA_ALL_SYSTEMS_ZONES: [{"data":[{"systemID":2,"zoneID":1,"name":"Appart","on":1,"maxTemp":30,"minTemp":15,"setpoint":18,"roomTemp":17.700001,"mode":3,"coldStages":1,"coldStage":1,"heatStages":1,"heatStage":1,"humidity":60,"units":0,"errors":[],"air_demand":0,"floor_demand":0},{"systemID":2,"zoneID":2,"name":"Chb Appart","on":1,"maxTemp":30,"minTemp":15,"setpoint":18,"roomTemp":17.6,"mode":3,"coldStages":1,"coldStage":1,"heatStages":1,"heatStage":1,"humidity":57,"units":0,"errors":[],"air_demand":0,"floor_demand":0},{"systemID":2,"zoneID":3,"name":"Elona","on":1,"maxTemp":30,"minTemp":15,"setpoint":20,"roomTemp":21.1,"mode":3,"coldStages":1,"coldStage":1,"heatStages":1,"heatStage":1,"humidity":47,"units":0,"errors":[],"air_demand":0,"floor_demand":0},{"systemID":2,"zoneID":4,"name":"Palier","on":1,"maxTemp":30,"minTemp":15,"setpoint":20,"roomTemp":20.5,"modes":[1,4,2,3,5],"mode":3,"coldStages":1,"coldStage":1,"heatStages":1,"heatStage":1,"humidity":38,"units":0,"errors":[],"air_demand":0,"floor_demand":0},{"systemID":2,"zoneID":5,"name":"Aedan","on":1,"maxTemp":30,"minTemp":15,"setpoint":20,"roomTemp":20.1,"mode":3,"coldStages":1,"coldStage":1,"heatStages":1,"heatStage":1,"humidity":57,"units":0,"errors":[],"air_demand":0,"floor_demand":0},{"systemID":2,"zoneID":6,"name":"ZONA 06","on":1,"maxTemp":30,"minTemp":15,"setpoint":20,"roomTemp":0,"mode":3,"coldStages":1,"coldStage":1,"heatStages":1,"heatStage":1,"humidity":0,"units":0,"errors":[],"air_demand":0,"floor_demand":0}]}]
2

En comparaison avec l’ancien plugin :

[2021-11-10 22:40:05][DEBUG] : CONNECTED, SENDING COMMAND (IP : 192.168.1.46, PORT : 3000), URL (http://192.168.1.46:3000/api/v1/hvac), POST
[2021-11-10 22:40:05][DEBUG] : Return reponse (200)
[2021-11-10 22:40:05][DEBUG] : CLOSING CONNECTION
[2021-11-10 22:40:05][DEBUG] : Return reponse ({ 	"data":	[{ 			"systemID":	1, 			"zoneID":	3, 			"name":	"V?randa SAM", 			"on":	1, 			"maxTemp":	30, 			"minTemp":	15, 			"setpoint":	20, 			"roomTemp":	17.299999, 			"mode":	3, 			"coldStages":	1, 			"coldStage":	1, 			"heatStages":	2, 			"heatStage":	2, 			"humidity":	49, 			"units":	0, 			"errors":	[], 			"air_demand":	0, 			"floor_demand":	1 		}] } )
[2021-11-10 22:40:05][DEBUG] : BEGIN updateInfo / tipo: info; parametro :roomTemp
3

Bonjour,

Veuillez mettre les logs dans un Texte préformaté !

Ainsi que corriger le titre du le tag du plug-in