non c’est pas normal, les lignes devraient plus ressembler à ceci:
Downloading https://files.pythonhosted.org/packages/59/11/1dd5c70f0f27a88a3a05772cd95f6087ac479fac66d9c7752ee5e16ddbbc/paho-mqtt-1.5.0.tar.gz (99kB)
Building wheels for collected packages: paho-mqtt
Running setup.py bdist_wheel for paho-mqtt: started
Running setup.py bdist_wheel for paho-mqtt: finished with status 'done'
c’est quelle version de python? (la version est indiqué au début du log)
après moi j’ai testé avec un jeedom qui a python 3.5.3 et un autre avec 3.7.3 et aucun soucis, même log
Sinon pour info il n’y a pas besoin de créer l’équipement, le plugin va le faire tout seul lors du discovery (ou alors faut connaitre l’identifiant du roomba qui fait partie de son nom sur le réseau si je me souviens bien)
Essaie d’installer wheel manuellement, il a l’air d’avoir bloqué la dessus: python3 -m pip install wheel
et ensuite de réinstaller les dépendances du plugin
Si, IP + l’id qui se trouve dans le hostname du roomba (que tu trouveras via ton routeur du coup)
le hostname aura la forme Roomba-xxxxxxxxxxxxxx; xxx étant l’identifiant à mettre dans la config
c’est ce que fait le bouton « découvrir » dans la config du plugin.
Failed building wheel for paho-mqtt
Running setup.py clean for paho-mqtt
Failed to build paho-mqtt
Installing collected packages: paho-mqtt
Running setup.py install for paho-mqtt: started
Running setup.py install for paho-mqtt: finished with status 'done'
Successfully installed paho-mqtt-1.5.0
Cloning into 'Roomba980-Python'..
DEPRECATION: The default format will switch to columns in the future. You can use --format=(legacy|columns) (or define a format=(legacy|columns) in your pip.conf under the [list] section) to disable this warning.
Je sais que c’est pas grand chose mais bon. J’attends l’arrivé de l’aspirateur mais çà sent pas bon …
J’ai finit dans OS/DB fait sudo apt-get install python3-wheel
J’ai ensuite relancer les dependances
Reading state information...
python3-setuptools is already the newest version (33.1.1-1).
0 upgraded, 0 newly installed, 0 to remove and 206 not upgraded.
Uninstalling six-1.14.0:
Successfully uninstalled six-1.14.0
Uninstalling paho-mqtt-1.5.0:
Successfully uninstalled paho-mqtt-1.5.0
Requirement already satisfied: setuptools in /usr/lib/python3/dist-packages
Collecting six
Using cached https://files.pythonhosted.org/packages/65/eb/1f97cb97bfc2390a276969c6fae16075da282f5058082d4cb10c6c5c1dba/six-1.14.0-py2.py3-none-any.whl
Installing collected packages: six
Successfully installed six-1.14.0
Collecting paho-mqtt
Using cached https://files.pythonhosted.org/packages/59/11/1dd5c70f0f27a88a3a05772cd95f6087ac479fac66d9c7752ee5e16ddbbc/paho-mqtt-1.5.0.tar.gz
Building wheels for collected packages: paho-mqtt
Running setup.py bdist_wheel for paho-mqtt: started
Running setup.py bdist_wheel for paho-mqtt: finished with status 'done'
Stored in directory: /root/.cache/pip/wheels/02/94/6c/8474137cb7a5a3e001d70a22c8ff919caee69435376bccce79
Successfully built paho-mqtt
Installing collected packages: paho-mqtt
Successfully installed paho-mqtt-1.5.0
Cloning into 'Roomba980-Python'...
On dirait que c’est bon. Mais j’aurai préféré que le plugin s’en charge
Bon, roomba reçu, et impossible de le connecter à Jeedom.
Je l’ai branché, mis en wifi avec l’app. Il est bien sur le réseau.
Ensuite je kill l’app,
Dans le plugin, configuration découvrir les roombas, il me met enregistrement effectué mais pas de roomba.
Si je crée un equipement, je lui met l’IP, puis récupérer mot de passe:
Alerte avec Unknown kroomba: kroomba_