Jessie to stretch failed on Jeedom SMART

Bonjour à tous,

Utilisateur de Jeedom depuis un bout de temps, je rencontre un souci sur l’upgrade de Jessie vers Stretch, et maintenant, un souci bien plus global sur l’installation d’une image fraiche.

J’ai suivi la procédure suivante : https://doc.jeedom.com/fr_FR/installation/smart

L’installe se passe bien, à la fin, j’ai bien un backupJeedom.tar.gz.installed sur la clé USB avec le log suivant :

==== PREPARE CARD ====
65536+0 records in
65536+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 2.93362 s, 11.4 MB/s
/dev/mmcblk0: msdos partitions

Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x43f79cf4.

Command (m for help): Created a new DOS disklabel with disk identifier 0x2a6f16d6.

Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

/dev/mmcblk0: msdos partitions
131072+0 records in
131072+0 records out
67108864 bytes (67 MB, 64 MiB) copied, 5.56045 s, 12.1 MB/s

Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.


Command (m for help): Partition type
   p   primary (0 primary, 0 extended, 4 free)
   e   extended (container for logical partitions)
Select (default p): Partition number (1-4, default 1): First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (65536-15269887, default 15269887): 
Created a new partition 1 of type 'Linux' and of size 256 MiB.

Command (m for help): Selected partition 1
Partition type (type L to list all types): Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.

Command (m for help): Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (589824-15269887, default 15269887): 
Created a new partition 2 of type 'Linux' and of size 8 MiB.

Command (m for help): Partition type
   p   primary (2 primary, 0 extended, 2 free)
   e   extended (container for logical partitions)
Select (default p): Partition number (3,4, default 3): First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (606208-15269887, default 15269887): 
Created a new partition 3 of type 'Linux' and of size 8 MiB.

Command (m for help): Partition type
   p   primary (3 primary, 0 extended, 1 free)
   e   extended (container for logical partitions)
Select (default e): 
Selected partition 4
First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (622592-15269887, default 15269887): 
Created a new partition 4 of type 'Extended' and of size 7 GiB.

Command (m for help): All primary partitions are in use.
Adding logical partition 5
First sector (624640-15269887, default 624640): Last sector, +sectors or +size{K,M,G,T,P} (624640-15269887, default 15269887): 
Created a new partition 5 of type 'Linux' and of size 8 MiB.

Command (m for help): All primary partitions are in use.
Adding logical partition 6
First sector (643072-15269887, default 643072): Last sector, +sectors or +size{K,M,G,T,P} (643072-15269887, default 15269887): 
Created a new partition 6 of type 'Linux' and of size 256 MiB.

Command (m for help): All primary partitions are in use.
Adding logical partition 7
First sector (1169408-15269887, default 1169408): Last sector, +sectors or +size{K,M,G,T,P} (1169408-15269887, default 15269887): 
Created a new partition 7 of type 'Linux' and of size 6.7 GiB.

Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

/dev/mmcblk0: msdos partitions 1 2 3 4 <5 6 7>
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.09419 s, 11.1 MB/s
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mkfs.fat 3.0.28 (2015-05-16)
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.085693 s, 12.2 MB/s
mke2fs 1.42.13 (17-May-2015)
Discarding device blocks:    4096/17551361052672/1755136               done                            
Creating filesystem with 1755136 4k blocks and 438912 inodes
Filesystem UUID: 8881eca6-7cfe-488f-825b-f6c811b53a31
Superblock backups stored on blocks: 
	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632

Allocating group tables:  0/54     done                            
Writing inode tables:  0/54     done                            
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information:  0/54     done

/dev/mmcblk0: msdos partitions 1 2 3 4 <5 6 7>
==== INSTALL BOOT ====
442+0 records in
442+0 records out
442 bytes copied, 0.002345 s, 188 kB/s
96+0 records in
96+0 records out
49152 bytes (49 kB, 48 KiB) copied, 0.005044 s, 9.7 MB/s
1184+0 records in
1184+0 records out
606208 bytes (606 kB, 592 KiB) copied, 0.074624 s, 8.1 MB/s
==== INSTALL JEEDOM ====
mkdir: can't create directory '/mnt1': File exists
mkdir: can't create directory '/mnt2': File exists
umount: can't umount /mnt2: Invalid argument
umount: can't umount /mnt1: Invalid argument

Number of files: 98,459 (reg: 80,888, dir: 13,156, link: 4,378, dev: 37)
Number of created files: 98,457 (reg: 80,888, dir: 13,154, link: 4,378, dev: 37)
Number of deleted files: 0
Number of regular files transferred: 80,866
Total file size: 3,132,221,334 bytes
Total transferred file size: 2,949,659,217 bytes
Literal data: 2,949,659,217 bytes
Matched data: 0 bytes
File list size: 2,621,232
File list generation time: 0.002 seconds
File list transfer time: 0.000 seconds
Total bytes sent: 2,956,180,273
Total bytes received: 1,623,360

sent 2,956,180,273 bytes  received 1,623,360 bytes  10,658,751.83 bytes/sec
total size is 3,132,221,334  speedup is 1.06
==== PREPARE JEEDOM BOOT ====
mkdir: can't create directory '/mnt2/media/boot': File exists
umount: can't umount /mnt1: Invalid argument
==== INSTALL MULTIBOOT SUPPORT ====
umount: can't umount /mnt2: Invalid argument
mkdir: can't create directory '/mnt2/multiboot': File exists

Mais rien de plus, le linux se lance et je ne ping rien, je vois bien que jeedom récupère un ip avec ifconfig, mais il ne ping pas l’extérieur et je ne le ping pas. J’ai même fait un autre test en changeant son IP attribuée automatiquement par mon DHCP, je reboot et Jeedom a bien sa nouvelle IP mais rien. J’en viens à me dire qu’il y a une défaillance matérielle mais je voudrais votre avis avant.

J’ai refait l’install plus de 3 fois et c’est la même, j’ai même réessayé de réinstall Jessie et c’est la même chose
(image ici : Amazon DriveVersion=1&entries=0&mgh=1 )

C’est vraiment problématique, je n’ai plus de chauffage et mon aquarium est out, … et il fait 2 degrée chez moi.

Merci pour votre aide

1 « J'aime »

Ben si la machine prends une ip, je ne suis pas convaincu que le souci soit hardware…

Sans connaitre l’infra réseau.

Ah les mises a jours en plein hiver d’une installation domotique non débrayable qui fait cailler les gens…

1 « J'aime »

'lut,
L’avantage c’est que ça motive pour réparer au plus vite. Et avec un peu de chance, tu as une équipe de supporters derrière

J’ai pas de smart mais si c’est la log normale, c’est bien moche comme log…
Personnellement j’aurai tendance à dire que l’installation ne se fait pas bien

Bonjour Arrown,

je ne sais pas si je pourrais t’aider car je n’ai pas de compétence en informatique mais il y des chose que je ne comprend pas dans ton message.

Passage de « Jessie à Strech » l’ image à télécharger sur le site Jeedom est en « Buster » (Débian 10) plus en « strech »

tu écrit:

Avoir « backupJeedom.tar.gz » sur la clef USB est le point de départ pas la fin.

As tu utilisé tu le recovery mode ?

Moi je l’ai utilisé en début de semaine, en respectant le mode opératoire donné par la DOC, j’ai juste patienter 45 minutes pas 30 , cela à bien fonctionné . Je me suis retrouvé avec un jeedom tout neuf, j’ repris ma sauvegarde et c’est reparti comme avant

Gérard

1 « J'aime »

Hello,

Merci pour vos retours,
Le point de départ est bien de mettre le backupJeedom.tar.gz sur une clé USB en FAT32, on la plug, on reboot et l’installe commence, une fois l’installe effectuée, nous avons accès au linux, pour marquer le fait d’avoir fini, l’installe renomme le fichier backupJeedom.tar.gz en .installed et y ajoute un log que j’ai copié au dessus.

Quand tu dis Recevory mode, c’est bien la manip que je te décris avec la clé USB ? Si oui, c’est ce que je fais.

J’espèrais retouver mon jeedom pour y restore mon backup, mais j’ai pas d’accès en dehors de l’écran connecté en HDMI sur le jeedom avec un clavier QWERTY.

Je trouve, comme nabeleo, le LOG accès SPACE, c’est pour ça que je demande au connaisseur leur avis please :slight_smile:
Merci à tous en tout cas.

Bonjour @Arrown,

Pour quelques explications :
voir ici : [Présentation] akenad - #10 par akenad
et ici : [RTEX] Jeedom Smart Recovery mode - passage en Buster Jeedom V4

akenad :slight_smile:

Je viens de vérifie sur la clef que je me suis servi .

Apparement j’ai le même log que toi .
l’installe renomme bien le fichier backupJeedom.tar.gz en .installed

Je ne vois pas pourquoi tu veux avoir accès à linux.

Tu devrais avoir accès à ton « Jeedom » avec ton navigateur en tapant son IP , moi j’ai j’ai juste lancer le raccourci de mes favori.
Ca ouvre la page d’accueil Jeedom
Login : admin / mot de pass : admin

il te demande quelque infos

tu tombe sur la Dashboard vide > la tu peut allez chercher ta sauvegarde

Ton IP à peut être changer ?

Gérard

Hello Akenad,

Nickel, j’ai fait ton tuto : [RTEX] Jeedom Smart Recovery mode - passage en Buster Jeedom V4
Et je peux repinger a nouveau mon jeedom, j’ai eu accès à l’ip en web browser et restaurer ma sauvegarde, ca semble prometteur, je regarde pourquoi mon rfx ne se lance pas mais merci à tous en tout ca. Je commençais a avoir froid :slight_smile:

Thanks

1 « J'aime »

Par contre, pour le RFXCOM, il ne démarre plus, avez vous une idée ?

Le log en DEBUG est le suivant :

[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x1C : Edisio
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x1E : FunkBus
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2020-12-07 12:43:51][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2020-12-07 12:43:51][DEBUG] : Writing PID 24732 to /tmp/jeedom/rfxcom/deamon.pid
[2020-12-07 12:43:51][DEBUG] : Init request module v2.21.0
[2020-12-07 12:43:51][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-12-07 13:43:51][DEBUG] : null
[2020-12-07 12:43:51][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH HTTP/1.1" 200 0
[2020-12-07 12:43:51][DEBUG] : Init serial module v3.5
[2020-12-07 12:43:51][DEBUG] : Start listening...
[2020-12-07 12:43:51][DEBUG] : Socket interface started
[2020-12-07 12:43:51][DEBUG] : LoopNetServer Thread started
[2020-12-07 12:43:51][DEBUG] : Open serial port on device: /dev/ttyUSB0, rate 38400, timeout : 9
[2020-12-07 12:43:51][DEBUG] : Listening on: [127.0.0.1:55000]
[2020-12-07 12:43:51][DEBUG] : Open Serialport
[2020-12-07 12:43:51][DEBUG] : flushOutput serial port
[2020-12-07 12:43:51][DEBUG] : flushInput serial port
[2020-12-07 12:43:51][DEBUG] : flushOutput serial port
[2020-12-07 12:43:51][DEBUG] : flushInput serial port
[2020-12-07 12:43:51][DEBUG] : Read Socket Thread Launched
[2020-12-07 12:43:51][DEBUG] : Read Device Thread Launched
[2020-12-07 12:43:52][DEBUG] : Send rfxcomd_reset
[2020-12-07 12:43:52][DEBUG] : Write data to serial port : 0d00000000000000000000000000
[2020-12-07 12:43:52][DEBUG] : Sleep 1 sec
[2020-12-07 12:43:53][DEBUG] : flushInput serial port
[2020-12-07 12:43:53][DEBUG] : Send get status test
[2020-12-07 12:43:53][DEBUG] : Write data to serial port : 0d00000102000000000000000000
[2020-12-07 12:43:53][DEBUG] : Message: 0d0100010253f30000270001031c
[2020-12-07 12:43:53][DEBUG] : Decode : 0d0100010253f30000270001031c
[2020-12-07 12:43:53][DEBUG] : Test message: 0d0100010253f30000270001031c
[2020-12-07 12:43:53][DEBUG] : PacketType: 0x01
[2020-12-07 12:43:53][DEBUG] : Length: 14
[2020-12-07 12:43:53][DEBUG] : Start decoding packet type 0x01
[2020-12-07 12:43:53][ERROR] : Error: unrecognizable packet (0d0100010253f30000270001031c) : index out of range
[2020-12-07 12:43:53][DEBUG] : Traceback (most recent call last):
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 163, in read_rfxcom
decodePacket(message)
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py", line 48, in decodePacket
infos = sys.modules['RfxPacket.'+str(packetType)].parse(message);
File "/var/www/html/plugins/rfxcom/resources/rfxcomd/RfxPacket/0x01.py", line 56, in parse
'msg10' : jeedom_utils.dec2hex(message[14]),
IndexError: index out of range
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56609]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"01056F1A"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56609]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56610]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"3EA03017"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56610]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56611]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"4A7AF3"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56611]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56612]
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"27777A89"}}'
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': '01056F1A'}
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56612]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56613]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"4EF0146F"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56613]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56614]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"8C12"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56614]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56615]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"4502"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56615]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56616]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"C804"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56616]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56617]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"D204"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56617]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56618]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"D101"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56618]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56619]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"F602"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56619]
[2020-12-07 13:43:53][INFO] : Démon RFXcom lancé
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56620]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"F902"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56620]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56621]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"FE02"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56621]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56622]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"A502"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56622]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56623]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"F004"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56623]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56624]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"DA01"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56624]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56625]
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': '3EA03017'}
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"BE01"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56625]
[2020-12-07 12:43:53][DEBUG] : Client connected to [127.0.0.1:56626]
[2020-12-07 12:43:53][DEBUG] : Message read from socket: b'{"apikey":"u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH","cmd":"add","device":{"id":"E102"}}'
[2020-12-07 12:43:53][DEBUG] : Client disconnected from [127.0.0.1:56626]
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': '4A7AF3'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': '27777A89'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': '4EF0146F'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': '8C12'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': '4502'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'C804'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'D204'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'D101'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'F602'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'F902'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'FE02'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'A502'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'F004'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'DA01'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'BE01'}
[2020-12-07 12:43:53][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2020-12-07 12:43:53][DEBUG] : Add device : {'id': 'E102'}
[2020-12-07 12:43:54][DEBUG] : Message: 0a520100be0100a62a0020
[2020-12-07 12:43:54][DEBUG] : Decode : 0a520100be0100a62a0020
[2020-12-07 12:43:54][DEBUG] : Test message: 0a520100be0100a62a0020
[2020-12-07 12:43:54][DEBUG] : PacketType: 0x52
[2020-12-07 12:43:54][DEBUG] : Length: 11
[2020-12-07 12:43:54][DEBUG] : Start decoding packet type 0x52
[2020-12-07 12:43:54][DEBUG] : Subtype = TH1 is THGN122/123, THGN132, THGR122/228/238/268
[2020-12-07 12:43:54][DEBUG] : Data : {'packetlen': '0x0A', 'packettype': '0x52', 'subtype': '0x01', 'seqnbr': '0x00', 'id1': '0xBE', 'id2': '0x01', 'temperaturesign': '', 'temperature': 166, 'humidity': 42, 'humidity_status': 0, 'battery': 10, 'rssi': 2}
[2020-12-07 12:43:54][DEBUG] : Decoded info : {'packettype': '0x52', 'subtype': '0x01', 'id': 'BE01', 'temperature': '16.6', 'humidity': 42, 'humidity_status': 0, 'battery': 10, 'rssi': 2}
[2020-12-07 12:43:54][DEBUG] : Device is known id : BE01
[2020-12-07 12:43:54][DEBUG] : Send to jeedom : {'devices': {'BE0152': {'packettype': '0x52', 'subtype': '0x01', 'id': 'BE01', 'temperature': '16.6', 'humidity': 42, 'humidity_status': 0, 'battery': 10, 'rssi': 2}}}
[2020-12-07 12:43:54][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-12-07 13:43:55][DEBUG] : {"devices":{"BE0152":{"packettype":"0x52","subtype":"0x01","id":"BE01","temperature":"16.6","humidity":42,"humidity_status":0,"battery":10,"rssi":2}}}
[2020-12-07 12:43:55][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH HTTP/1.1" 200 0
[2020-12-07 12:43:56][DEBUG] : Message: 0a520101f602004b420029
[2020-12-07 12:43:56][DEBUG] : Decode : 0a520101f602004b420029
[2020-12-07 12:43:56][DEBUG] : Test message: 0a520101f602004b420029
[2020-12-07 12:43:56][DEBUG] : PacketType: 0x52
[2020-12-07 12:43:56][DEBUG] : Length: 11
[2020-12-07 12:43:56][DEBUG] : Start decoding packet type 0x52
[2020-12-07 12:43:56][DEBUG] : Subtype = TH1 is THGN122/123, THGN132, THGR122/228/238/268
[2020-12-07 12:43:56][DEBUG] : Data : {'packetlen': '0x0A', 'packettype': '0x52', 'subtype': '0x01', 'seqnbr': '0x01', 'id1': '0xF6', 'id2': '0x02', 'temperaturesign': '', 'temperature': 75, 'humidity': 66, 'humidity_status': 0, 'battery': 100, 'rssi': 2}
[2020-12-07 12:43:56][DEBUG] : Decoded info : {'packettype': '0x52', 'subtype': '0x01', 'id': 'F602', 'temperature': '7.5', 'humidity': 66, 'humidity_status': 0, 'battery': 100, 'rssi': 2}
[2020-12-07 12:43:56][DEBUG] : Device is known id : F602
[2020-12-07 12:43:56][DEBUG] : Send to jeedom : {'devices': {'F60252': {'packettype': '0x52', 'subtype': '0x01', 'id': 'F602', 'temperature': '7.5', 'humidity': 66, 'humidity_status': 0, 'battery': 100, 'rssi': 2}}}
[2020-12-07 12:43:56][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-12-07 13:43:56][DEBUG] : {"devices":{"F60252":{"packettype":"0x52","subtype":"0x01","id":"F602","temperature":"7.5","humidity":66,"humidity_status":0,"battery":100,"rssi":2}}}
[2020-12-07 12:43:56][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH HTTP/1.1" 200 0
[2020-12-07 12:43:59][DEBUG] : Message: 0a5201028604009c2c0029
[2020-12-07 12:43:59][DEBUG] : Decode : 0a5201028604009c2c0029
[2020-12-07 12:43:59][DEBUG] : Test message: 0a5201028604009c2c0029
[2020-12-07 12:43:59][DEBUG] : PacketType: 0x52
[2020-12-07 12:43:59][DEBUG] : Length: 11
[2020-12-07 12:43:59][DEBUG] : Start decoding packet type 0x52
[2020-12-07 12:43:59][DEBUG] : Subtype = TH1 is THGN122/123, THGN132, THGR122/228/238/268
[2020-12-07 12:43:59][DEBUG] : Data : {'packetlen': '0x0A', 'packettype': '0x52', 'subtype': '0x01', 'seqnbr': '0x02', 'id1': '0x86', 'id2': '0x04', 'temperaturesign': '', 'temperature': 156, 'humidity': 44, 'humidity_status': 0, 'battery': 100, 'rssi': 2}
[2020-12-07 12:43:59][DEBUG] : Decoded info : {'packettype': '0x52', 'subtype': '0x01', 'id': '8604', 'temperature': '15.6', 'humidity': 44, 'humidity_status': 0, 'battery': 100, 'rssi': 2}
[2020-12-07 12:43:59][DEBUG] : unknown device id : 8604
[2020-12-07 12:44:09][DEBUG] : Message: 0a520103450200b0290039
[2020-12-07 12:44:09][DEBUG] : Decode : 0a520103450200b0290039
[2020-12-07 12:44:09][DEBUG] : Test message: 0a520103450200b0290039
[2020-12-07 12:44:09][DEBUG] : PacketType: 0x52
[2020-12-07 12:44:09][DEBUG] : Length: 11
[2020-12-07 12:44:09][DEBUG] : Start decoding packet type 0x52
[2020-12-07 12:44:09][DEBUG] : Subtype = TH1 is THGN122/123, THGN132, THGR122/228/238/268
[2020-12-07 12:44:09][DEBUG] : Data : {'packetlen': '0x0A', 'packettype': '0x52', 'subtype': '0x01', 'seqnbr': '0x03', 'id1': '0x45', 'id2': '0x02', 'temperaturesign': '', 'temperature': 176, 'humidity': 41, 'humidity_status': 0, 'battery': 100, 'rssi': 3}
[2020-12-07 12:44:09][DEBUG] : Decoded info : {'packettype': '0x52', 'subtype': '0x01', 'id': '4502', 'temperature': '17.6', 'humidity': 41, 'humidity_status': 0, 'battery': 100, 'rssi': 3}
[2020-12-07 12:44:09][DEBUG] : Device is known id : 4502
[2020-12-07 12:44:10][DEBUG] : Send to jeedom : {'devices': {'450252': {'packettype': '0x52', 'subtype': '0x01', 'id': '4502', 'temperature': '17.6', 'humidity': 41, 'humidity_status': 0, 'battery': 100, 'rssi': 3}}}
[2020-12-07 12:44:10][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-12-07 13:44:10][DEBUG] : {"devices":{"450252":{"packettype":"0x52","subtype":"0x01","id":"4502","temperature":"17.6","humidity":41,"humidity_status":0,"battery":100,"rssi":3}}}
[2020-12-07 12:44:10][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH HTTP/1.1" 200 0
[2020-12-07 12:44:18][DEBUG] : Message: 0a520104da0100c8270239
[2020-12-07 12:44:18][DEBUG] : Decode : 0a520104da0100c8270239
[2020-12-07 12:44:18][DEBUG] : Test message: 0a520104da0100c8270239
[2020-12-07 12:44:18][DEBUG] : PacketType: 0x52
[2020-12-07 12:44:18][DEBUG] : Length: 11
[2020-12-07 12:44:18][DEBUG] : Start decoding packet type 0x52
[2020-12-07 12:44:18][DEBUG] : Subtype = TH1 is THGN122/123, THGN132, THGR122/228/238/268
[2020-12-07 12:44:18][DEBUG] : Data : {'packetlen': '0x0A', 'packettype': '0x52', 'subtype': '0x01', 'seqnbr': '0x04', 'id1': '0xDA', 'id2': '0x01', 'temperaturesign': '', 'temperature': 200, 'humidity': 39, 'humidity_status': 2, 'battery': 100, 'rssi': 3}
[2020-12-07 12:44:18][DEBUG] : Decoded info : {'packettype': '0x52', 'subtype': '0x01', 'id': 'DA01', 'temperature': '20.0', 'humidity': 39, 'humidity_status': 2, 'battery': 100, 'rssi': 3}
[2020-12-07 12:44:18][DEBUG] : Device is known id : DA01
[2020-12-07 12:44:18][DEBUG] : Send to jeedom : {'devices': {'DA0152': {'packettype': '0x52', 'subtype': '0x01', 'id': 'DA01', 'temperature': '20.0', 'humidity': 39, 'humidity_status': 2, 'battery': 100, 'rssi': 3}}}
[2020-12-07 12:44:18][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-12-07 13:44:18][DEBUG] : {"devices":{"DA0152":{"packettype":"0x52","subtype":"0x01","id":"DA01","temperature":"20.0","humidity":39,"humidity_status":2,"battery":100,"rssi":3}}}
[2020-12-07 12:44:19][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH HTTP/1.1" 200 0
[2020-12-07 12:44:19][ERROR] : Timeout waiting status
[2020-12-07 12:44:19][DEBUG] : Shutdown
[2020-12-07 12:44:19][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2020-12-07 12:44:19][DEBUG] : LoopNetServer Thread stopped
[2020-12-07 12:44:19][DEBUG] : Close serial port
[2020-12-07 12:44:19][DEBUG] : Serial port closed
[2020-12-07 12:44:19][DEBUG] : Exit 0
[2020-12-07 13:45:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2020-12-07 13:45:05][INFO] : Lancement démon rfxcomd : /usr/bin/python3 /var/www/html/plugins/rfxcom/resources/rfxcomd/rfxcomd.py --device auto --loglevel debug --socketport 55000 --serialrate 38400 --protocol 12,13,18,20,21,22,23 --callback http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php --apikey u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH --cycle 0.3 --pid /tmp/jeedom/rfxcom/deamon.pid
[2020-12-07 12:45:06][INFO] : Start rfxcomd
[2020-12-07 12:45:06][INFO] : Log level : debug
[2020-12-07 12:45:06][INFO] : Socket port : 55000
[2020-12-07 12:45:06][INFO] : Socket host : 127.0.0.1
[2020-12-07 12:45:06][INFO] : PID file : /tmp/jeedom/rfxcom/deamon.pid
[2020-12-07 12:45:06][INFO] : Device : auto
[2020-12-07 12:45:06][INFO] : Apikey : u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH
[2020-12-07 12:45:06][INFO] : Callback : http://127.0.0.1:80/plugins/rfxcom/core/php/jeeRfxcom.php
[2020-12-07 12:45:06][INFO] : Cycle : 0.3
[2020-12-07 12:45:06][INFO] : Serial rate : 38400
[2020-12-07 12:45:06][INFO] : Serial timeout : 9
[2020-12-07 12:45:06][INFO] : Protocol : 12,13,18,20,21,22,23
[2020-12-07 12:45:06][INFO] : Find device : /dev/ttyUSB0
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x01 : Interface Response Message
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x10 : Lighting1 (X10, ARC, ELRO, Waveman, EMW200, IMPULS,RisingSun, Philips, Energenie, GDR2, HQ, Oase)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x11 : Lighting2 (AC, HomeEasy EU, ANSLUT, Kambrook)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x13 : Lighting4 (PT2262)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x14 : Lighting5 ( LightwaveRF, Siemens, EMW100, BBSB, MDREMOTE,RSL2, OTIO, Livolo, RGB, Aoke relay, Eurodomest, RGB432W, Legrand,Avantek, IT, Kangtai)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x15 : Lighting6 (Blyss (AE), Cuveo)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x16 : Chime (Byron SX, Byron MP001, SelectPlus, Envivo, Alfawise)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x17 : Fan (Siemens SF01, Itho, LucciAir, SEAV,Westinghouse,Casafan,FT1211R,Novy)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x19 : Blinds1 (RollerTrol,Hasta,A-OK,Raex, Media Mount, DC)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x1C : Edisio
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x1D : Honeywell ActivLink
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x1F : Hunter Fan
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x20 : Security1 (X10, KD101, Visonic, Meiantech, SA30, SA33, RM174RF)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x21 : Security2 (KeeLoq)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x28 : Camera1 (Ninja/Robocam)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x30 : Remote control and IR (ATI, Medion, PC Remote)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x40 : Thermostat1 (Digimax)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x42 : Thermostat3 (Mertik-Maxitrol G6R-H4 type)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x4E : BBQ Temperature sensors (BBQ1)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x4F : Temperature and rain sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x50 : Temperature sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x51 : Humidity sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x52 : Temperature and humidity sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x53 : Barometric sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x54 : Temperature, humidity and barometric sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x55 : Rain sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x56 : Wind sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x57 : UV sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x58 : Date/time sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x59 : Current sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x5A : Current sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x5B : Current + ENERGY sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x5C : Power sensors
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x5D : Weighting scale
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x60 : CARTELECTRONIC
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x70 : RFXsensor
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x71 : RFXMeter
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x72 : FS20 (FS20, FHT 8V, FHT80)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x76 : Weather stations (WEATHER1-WEATHER2)
[2020-12-07 12:45:06][DEBUG] : Load decoder packet type 0x77 : SOLAR1
[2020-12-07 12:45:06][DEBUG] : Writing PID 28052 to /tmp/jeedom/rfxcom/deamon.pid
[2020-12-07 12:45:06][DEBUG] : Init request module v2.21.0
[2020-12-07 12:45:06][DEBUG] : Starting new HTTP connection (1): 127.0.0.1:80
[2020-12-07 13:45:06][DEBUG] : null
[2020-12-07 12:45:06][DEBUG] : http://127.0.0.1:80 "GET /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH HTTP/1.1" 200 0
[2020-12-07 12:45:06][DEBUG] : Init serial module v3.5
[2020-12-07 12:45:06][DEBUG] : Start listening...
[2020-12-07 12:45:06][DEBUG] : Socket interface started
[2020-12-07 12:45:06][DEBUG] : LoopNetServer Thread started
[2020-12-07 12:45:06][DEBUG] : Open serial port on device: /dev/ttyUSB0, rate 38400, timeout : 9
[2020-12-07 12:45:06][DEBUG] : Listening on: [127.0.0.1:55000]
[2020-12-07 12:45:06][DEBUG] : Open Serialport
[2020-12-07 12:45:06][DEBUG] : flushOutput serial port
[2020-12-07 12:45:06][DEBUG] : flushInput serial port
[2020-12-07 12:45:06][DEBUG] : flushOutput serial port
[2020-12-07 12:45:06][DEBUG] : flushInput serial port
[2020-12-07 12:45:06][DEBUG] : Read Socket Thread Launched
[2020-12-07 12:45:06][DEBUG] : Read Device Thread Launched
[2020-12-07 12:45:07][DEBUG] : Send rfxcomd_reset
[2020-12-07 12:45:07][DEBUG] : Write data to serial port : 0d00000000000000000000000000
[2020-12-07 12:45:07][DEBUG] : Sleep 1 sec
[2020-12-07 12:45:08][DEBUG] : flushInput serial port
[2020-12-07 12:45:08][DEBUG] : Send get status test
[2020-12-07 12:45:08][DEBUG] : Write data to serial port : 0d00000102000000000000000000
[2020-12-07 12:45:08][DEBUG] : Message: 0d0100010253f30000270001031c
[2020-12-07 12:45:08][DEBUG] : Decode : 0d0100010253f30000270001031c
[2020-12-07 12:45:08][DEBUG] : Test message: 0d0100010253f30000270001031c
[2020-12-07 12:45:08][DEBUG] : PacketType: 0x01
[2020-12-07 12:45:08][DEBUG] : Length: 14
[2020-12-07 12:45:08][DEBUG] : Start decoding packet type 0x01

...

[2020-12-07 12:45:32][DEBUG] : http://127.0.0.1:80 "POST /plugins/rfxcom/core/php/jeeRfxcom.php?apikey=u4PN7Z3FWRwZH0nATKFxcVjGn2IRxCPH HTTP/1.1" 200 0
[2020-12-07 12:45:34][ERROR] : Timeout waiting status
[2020-12-07 12:45:34][DEBUG] : Shutdown
[2020-12-07 12:45:34][DEBUG] : Removing PID file /tmp/jeedom/rfxcom/deamon.pid
[2020-12-07 12:45:34][DEBUG] : LoopNetServer Thread stopped
[2020-12-07 12:45:34][DEBUG] : Close serial port
[2020-12-07 12:45:34][DEBUG] : Serial port closed
[2020-12-07 12:45:34][DEBUG] : Exit 0

Merci pour votre aide

Salut Arrown,

voir ici : [RTEX] plugin-rfxcom et les boitiers RFXtrx433

akenad :slight_smile:

Hello Akenad,

Thanks mais je sèche pour le coup, je regarde sur leur site rfxcom, je download RFXtrx433E Pro1 Firmware, le rfxflash.exe, je suis leur procédure de MAJ (Doc PDF Point 6+), mais que faire ensuite ?
Si je copie sur une clé USB dans le linux, le .exe ne marche pas (normal, programme windows); et quand je plug l’antenne rfx sur mon laptop, le programme ne la voit pas, même chose en mettant l’ip de jeedom.

J’ai la même antenne que toi dans ton tuto : « RFXtrx433E batch 2315 »

Merci encore

Hello

Les drivers … il faut pas oublier de les installer.

Arf, ereur de débutant… ok, je download donc les drivers ici Virtual COM Port Drivers (ftdichip.com)

C’est détecté lorsque je lance RFXmngr (Windows program)
Il me le trouve et communique par USB en COM-1. Mais en faisant la même chose avec le RFXflash, il y a la même fenetre mais ne trouve aucun port (No COM port found)

Avez vous fait comme cela pour MAJ votre antenne ?

Merci encore

Bonjour,

RFXCOM Flash ne se connecte pas tout seul, il faut forcer la connection en cliquant sur l’icône représentant un puce rouge.( jai cherché également)

gérard

Hello again,

Merci PapiGege, j’avais bien cliqué sur la puce rouge, regardez le screenshot, A gauche, le programme FLASH qui ne voit rien, a droite le programme de management qui détecte direct. (J’ai essayé en lancant, l’un, sans l’autre, avec l’autre, etc. Rien ne change)

Autre point, la version du firmware me parait bien différent de ton tuto Akenad

2020-12-08 04:14:13:818= 0D0100040253F30000270001031C
Packettype        = Interface Message
subtype           = Interface Response
Sequence nbr      = 4
response on cmnd  = Get Status
Transceiver type  = 433.92MHz
Firmware version  = 243
Firmware Type     = Ext
Transmit power    = 10dBm
Hardware version  = 1.3  RFXtrx433E

Si vous avez des conseils, je suis preneur.

Merci

J’ai réinstalle les drivers et je la vois dornavant !
J’avance j’avance :slight_smile:

Hello, c’est good, je suis maintenant en PRO1

Packettype        = Interface Message
subtype           = Interface Response
Sequence nbr      = 1
response on cmnd  = Get Status
Transceiver type  = 433.92MHz
Firmware version  = 1043
Firmware Type     = Pro1
Noise level       = 50
Transmit power    = 10dBm
Hardware version  = 1.3  RFXtrx433E

Je récupère les capteurs de température, Bon, la porte de garge Somfy n’est pas OK.

On est d’accord que le fait de passer de « Firmware Type = Ext » à « Firmware Type = Pro1 » n’a pas trop d’impact ?

Merci en tout cas à tous