Install.sh ne fonctionne plus a cause d'une archive manquante sur github

Le script d’installation de Jeedom ne marche plus. Un fichier est manquant sur github.
J’ai crashé mon jeedom et j’essaie de la réinstaller.
J’ai fait un wget https://raw.githubusercontent.com/jeedom/core/master/install/install.sh
Ensuite je lance ./install.sh
Les 5 premères étapes passent sans problème
Et à l’étape 6 :

Start step_6_jeedom_download
--2020-05-01 04:52:16--  https://github.com/jeedom/core/archive/stable.zip
Résolution de github.com (github.com)… 140.82.118.4
Connexion à github.com (github.com)|140.82.118.4|:443… connecté.
requête HTTP transmise, en attente de la réponse… 302 Found
Emplacement : https://codeload.github.com/jeedom/core/zip/stable [suivant]
--2020-05-01 04:52:17--  https://codeload.github.com/jeedom/core/zip/stable
Résolution de codeload.github.com (codeload.github.com)… 140.82.112.10
Connexion à codeload.github.com (codeload.github.com)|140.82.112.10|:443… connecté.
requête HTTP transmise, en attente de la réponse… 404 Not Found
2020-05-01 04:52:17 erreur 404 : Not Found.

Could not download jeedom from github, use preadd version if exist
[/tmp/jeedom.zip]
  End-of-central-directory signature not found.  Either this file is not
  a zipfile, or it constitutes one disk of a multi-part archive.  In the
  latter case the central directory and zipfile comment will be found on
  the last disk(s) of this archive.
unzip:  cannot find zipfile directory in one of /tmp/jeedom.zip or
        /tmp/jeedom.zip.zip, and cannot find /tmp/jeedom.zip.ZIP, period.
Could not unzip archive - abort

N’y aurait t’il pas eu quelques changements de lieux …
peut’être trouvera tu ton bonheur ici :

https://doc.jeedom.com/fr_FR/installation/index

Bonjour,

C’est sur quel matériel ?

A priori en lien avec ce sujet:

Je confirme que le lien indiqué dans le log n’existe pas :
https://github.com/jeedom/core/archive/stable.zip

Par contre, ce lien existe bien :
https://github.com/jeedom/core/archive/V4-stable.zip

Tu as indiqué une option lors du lancement du script « install.sh » ?
Comment l’as-tu récupéré ?

Le plus simple est de repartir from scratch avec ce fichier :
https://doc.jeedom.com/fr_FR/installation/index#tocAnchor-19

Bonjour @pBAC,
Probablement parce que tu avais déjà téléchargé auparavant un fichier install.sh avec un chemin différent.
En effet si tu as déjà un fichier « install.sh » dans le répertoire et que tu télécharges avec wget un fichier du même nom il va être stocké en tant que install.sh.1.
Et donc si tu lances install.sh tu ne lances pas celui que tu viens de télécharger !

akenad :slight_smile:

1 « J'aime »

Ce sujet a été automatiquement fermé après 24 heures suivant le dernier commentaire. Aucune réponse n’est permise dorénavant.