Controle de la Vanne DanFoss Ally

[GBT]

Bonjour,
Je suis nouveau sur Jeedom, mais les tutos m’ont permis de faire seul les points suivants sur mon NAS QNAP depuis 2 jours

• Installation de Jeedom 4 avec docker
• Installation de DeconZ avec docker avec accès à la clé USB
• Utilisation de deconZ en mode distant
• Upgrade du firmware de ma clé ConBee 2
• Inclusion réussie de la vanne thermostatique DanFoss Ally

Maintenant que la vanne est visible dans le dashboard, j’ai l’impression que la gateway recoit assez peu de données et j’ai donc l’impression que quelque-chose cloche …
Dans l’ecran Reseaux de Deconz, je vois que ca communique (18/12/2020 à 16:37:55) mais dans le dashboard, il m’indique que la date de collecte du capteur de température est le 17/12 à 21h30.

J’ai lu dans un autre post que la valeur de l’attribut « Valve » correspond à un pourcentage d’ouverture. Chez moi cette valeur est à zéro

Bref, si vous avez des idées pour faire avancer le schmilblic, j’attends vos suggestions.

Cdt,
Gilles.

[GBT]

Ma vanne etait visiblement considérée comme deconnectée, et l’interface graphique DeconZ ne me presentais plus de lien vert entre eux
J’ai finalement refait une installation de deconz avec l’acces VNC activé pour m’eviter de repasser sous Windows …
Cette fois, le lien vert est bien revenu, mais le reseau Deconz reste desesperemment vide malgré la demande d’inclusion.

J’ai lu un post sur la même situation mais pas sur d’avoir vu une réponse qui corrige le probleme

[GBT]

Apres un reset de la vanne, ca semble reparti …

[GBT]

Les vacances sont terminées, alors je reviens sur ma vanne qui ne me présente aucune donnée dans le dashboard Jeedom, alors que les infos Brutes dans le plugin Deconz montrent bien que des données sont récupérées (consigne, température locale, batterie).

Des idées ?

[sagitaz]

Salut,

Pas trop de distance entre ta Conbee et la Ally?

J’ai installer en test en vu de remplacer des tête zwave une Ally chez moi il y a 4 jours, inclusion rapide, remonté de température ok, et envoie de modification de consigne plus rapide que sur mes zwave.

[GBT]

Bonjour sagitaz,
Etant donné que les infos brutes dans le plugin deconz sont correctes, je pense que la liaison entre la cle et la vanne est ok mais je vais quand meme la rapprocher de la cle.
Je pensais plutot a detruire lobjet jeedom pour le recreer mais jai peur de devoir refaire linclusion etc …

[HugoVal11]

Regardes les dates des infos brutes, si ça se trouve elle datent de 24 h.
Et c’est inutile de détruire l’objet dans deconz ou jeedom, les nouvelles inclusions écrasent les anciennes.

[GBT]

Mes infos brutes sont à jour (« lastseen »: « 2021-01-10T09:31Z »,)
J’ai supprimé l’objet jeedom, et le nouvel objet est correct car je vois ma consigne de 18.5.

@sagitaz, peux-tu me montrer la config (commandes) de ta vanne ?

[GBT]

L’etat OFF de ma vanne persiste :

  "state": {
    "errorcode": null,
    "lastupdated": "2021-01-10T12:14:12.639",
    "mountingmodeactive": false,
    "on": false,
    "temperature": 2659,
    "valve": 0,
    "windowopen": "Closed"
  },

[HugoVal11]

@GBT

"lastupdated": "2021-01-10T12:14:12.639",

Revérifie dans quelques heures, quand tu changes le heatpoint, ça bouge ?
Le démon n’a pas de probleme ?

[sagitaz]

et les infos brute :

{
    "106": {
        "config": {
            "battery": 80,
            "displayflipped": null,
            "heatsetpoint": 2300,
            "locked": null,
            "mountingmode": null,
            "offset": 0,
            "on": true,
            "reachable": true
        },
        "ep": 1,
        "etag": "98b239e96716c36b6a98b57ae9ff230c",
        "lastseen": "2021-01-10T17:32Z",
        "manufacturername": "Danfoss",
        "modelid": "eTRV0100",
        "name": "Thermostat cuisine",
        "state": {
            "errorcode": null,
            "lastupdated": "2021-01-10T17:32:32.171",
            "mountingmodeactive": null,
            "on": true,
            "temperature": 1784,
            "valve": 13,
            "windowopen": "Closed"
        },
        "swversion": "01.02.0008 01.02",
        "type": "ZHAThermostat",
        "uniqueid": "84:2e:14:ff:fe:20:54:bd-01-0201"
    },
    "107": {
        "config": {
            "battery": 80,
            "on": true,
            "reachable": true
        },
        "ep": 1,
        "etag": "a32432c920ab4ed120624fe3a6f7aba1",
        "lastseen": "2021-01-10T17:09Z",
        "manufacturername": "Danfoss",
        "modelid": "eTRV0100",
        "name": "Thermostat cuisine",
        "state": {
            "lastset": "2021-01-07T14:09:49Z",
            "lastupdated": "2021-01-10T15:18:40.786",
            "localtime": "2021-01-10T16:18:44",
            "utc": "2021-01-10T15:18:44Z"
        },
        "swversion": "01.02.0008 01.02",
        "type": "ZHATime",
        "uniqueid": "84:2e:14:ff:fe:20:54:bd-01-000a"
    }
}

[GBT]

Le démon est chez moi arrêté, car je suis en mode deconZ remote.

        "state": {
            "errorcode": null,
            "lastupdated": "2021-01-10T18:17:53.254",
            "mountingmodeactive": true,
            "on": false,
            "temperature": 2574,
            "valve": 0,
            "windowopen": "Closed"
        }

Ma conf ressemble à celle de @sagitaz.

J’utilise la version deconZ stable du 28/10 mais j’ai vu qu’une version plus recente (1.0.16) corrigeait des pbs avec ce matériel (https://github.com/Smanar/Domoticz-deCONZ)
@sagitaz, tu utilises quelle version du plugin deconz ?

[GBT]

Lorsque je lance le démon j’ai les erreurs suivantes :

[2021-01-10 19:16:50][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consécutivement
[2021-01-10 19:16:54][INFO] : Lancement démon deconz : /usr/bin/python3 /var/www/html/plugins/deconz/resources/deconzd/deconzd.py --loglevel debug --socketport 55088 --callback http://127.0.0.1:80/plugins/deconz/core/php/jeeDeconz.php --apikey ..... --cycle 0 --pid /tmp/jeedom/deconz/deamon.pid
Traceback (most recent call last):
  File "/var/www/html/plugins/deconz/resources/deconzd/deconzd.py", line 32, in <module>
    from websocket import create_connection
ModuleNotFoundError: No module named 'websocket'
[2021-01-10 19:17:24][ERROR] : Impossible de lancer le démon deconz, vérifiez le port

J’installe ce module illico

#pip install websocket

Le démarrage du démon a réussi, mais ca ne va visiblement pas jusqu’au bout :

[2021-01-10 19:57:46.283][DEBUG] : Starting WebSocket for  on ip nascc67b6 and port 32443
[2021-01-10 20:57:55][DEBUG] : nascc67b6:32770/api/F90D234FD0/sensors type : POST
[2021-01-10 20:57:55][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":74,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"640090b157df4b5ae5187048fb77e605","lastseen":"2021-01-10T19:57Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T19:40:45.133","mountingmodeactive":false,"on":false,"temperature":2467,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"battery":74,"on":true,"reachable":true},"ep":1,"etag":"9b1f2fe8460510b007cca04b173c0ae4","lastseen":"2021-01-10T19:57Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"lastset":"2021-01-04T16:35:59Z","lastupdated":"2021-01-10T14:43:02.384","localtime":"2021-01-10T15:42:56","utc":"2021-01-10T14:42:56Z"},"type":"ZHATime","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-000a"}}
[2021-01-10 20:57:55][DEBUG] : nascc67b6:32770/api/F90D234FD0/lights type : POST
[2021-01-10 20:57:55][DEBUG] : {"1":{"etag":"b3c7068bad1bdc658e9a4e3f74e6e914","hascolor":false,"lastannounced":null,"lastseen":"2021-01-10T19:57Z","manufacturername":"dresden elektronik","modelid":"ConBee II","name":"Configuration tool 1","state":{"reachable":true},"swversion":"0x26680700","type":"Configuration tool","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"}}
[2021-01-10 19:58:24.081][DEBUG] : Signal 15 caught, exiting...
[2021-01-10 19:58:24.081][DEBUG] : Shutdown
[2021-01-10 19:58:24.081][DEBUG] : Removing PID file /tmp/jeedom/deconz/deamon.pid
[2021-01-10 19:58:24.309][DEBUG] : LoopNetServer Thread stopped
[2021-01-10 19:58:24.331][DEBUG] : Exit 0

Après la lecture de Capteurs xiaomi (via deconz) reçu par jeedom mais pas mis à jour (encore...) - #57 par altoinou, j’ai désactivé la gestion auto du démon ainsi que forcer les fuseaux horaires et le comportement est plus fiable et je vois le dialogue entre la gateway et jeedom … enfin !!

J’attend quelques jours pour verifier que cela fonctionne et je désactiverai soit les fuseaux soit la gestion auto pour voir lequel m’a posé tant de soucis …

[2021-01-10 21:59:16][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":73,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2dac3921607c8599ba8ef64cf7d74b46","lastseen":"2021-01-10T20:59Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T20:51:45.112","mountingmodeactive":false,"on":false,"temperature":2315,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"batter...
[2021-01-10 22:00:17][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":73,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2dac3921607c8599ba8ef64cf7d74b46","lastseen":"2021-01-10T21:00Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T20:51:45.112","mountingmodeactive":false,"on":false,"temperature":2315,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"batter...
[2021-01-10 22:00:17][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":73,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2dac3921607c8599ba8ef64cf7d74b46","lastseen":"2021-01-10T21:00Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T20:51:45.112","mountingmodeactive":false,"on":false,"temperature":2315,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"batter...
[2021-01-10 22:01:17][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":73,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2dac3921607c8599ba8ef64cf7d74b46","lastseen":"2021-01-10T21:01Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T20:51:45.112","mountingmodeactive":false,"on":false,"temperature":2315,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"batter...
[2021-01-10 22:01:17][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":73,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2dac3921607c8599ba8ef64cf7d74b46","lastseen":"2021-01-10T21:01Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T20:51:45.112","mountingmodeactive":false,"on":false,"temperature":2315,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"batter...
[2021-01-10 22:02:18][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":73,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2dac3921607c8599ba8ef64cf7d74b46","lastseen":"2021-01-10T21:02Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T20:51:45.112","mountingmodeactive":false,"on":false,"temperature":2315,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"batter...
[2021-01-10 22:02:18][DEBUG] : {"1":{"config":{"configured":true,"on":true,"sunriseoffset":30,"sunsetoffset":-30},"etag":"b6d68567cd8d80938d4ee98e493f840d","manufacturername":"Philips","modelid":"PHDL00","name":"Daylight","state":{"dark":true,"daylight":false,"lastupdated":"2021-01-10T18:20:25.481","status":230,"sunrise":"2021-01-10T07:27:43","sunset":"2021-01-10T16:37:59"},"swversion":"1.0","type":"Daylight","uniqueid":"00:21:2e:ff:ff:06:ac:35-01"},"2":{"config":{"battery":73,"displayflipped":null,"heatsetpoint":2200,"locked":null,"mountingmode":true,"offset":0,"on":true,"reachable":true},"ep":1,"etag":"2dac3921607c8599ba8ef64cf7d74b46","lastseen":"2021-01-10T21:02Z","manufacturername":"Danfoss","modelid":"eTRV0100","name":"Thermostat Danfoss Ally","state":{"errorcode":null,"lastupdated":"2021-01-10T20:51:45.112","mountingmodeactive":false,"on":false,"temperature":2315,"valve":0,"windowopen":"Closed"},"type":"ZHAThermostat","uniqueid":"cc:cc:cc:ff:fe:4e:01:db-01-0201"},"3":{"config":{"batter...

[sagitaz]

[GBT]

OK, c’est identique pour moi.

Et aujourdhui cela fonctionne !
Pourvu que ca dure

L’etat est passé est ON et l’ouverture de la valve presente des valeurs

Merci à @sagitaz et @HugoVal11 pour leur infos ou idées.